From: Tetsuya Mukawa <mukawa@igel.co.jp>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 4/8] eal: Consolidate rte_eal_pci_probe/close_one_driver() of linuxapp and bsdapp
Date: Tue, 19 May 2015 15:21:49 +0900 [thread overview]
Message-ID: <1432016513-8456-5-git-send-email-mukawa@igel.co.jp> (raw)
In-Reply-To: <1432016513-8456-1-git-send-email-mukawa@igel.co.jp>
This patch consolidates below functions, and implements these in common
eal code.
- rte_eal_pci_probe_one_driver()
- rte_eal_pci_close_one_driver()
Because pci_map_device() is only implemented in linuxapp, the patch
implements it in bsdapp too. This implemented function will be merged to
linuxapp one with later patch.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
---
lib/librte_eal/bsdapp/eal/eal_pci.c | 74 ++---------------
lib/librte_eal/common/eal_common_pci.c | 129 ++++++++++++++++++++++++++++
lib/librte_eal/common/eal_private.h | 21 ++---
lib/librte_eal/linuxapp/eal/eal_pci.c | 148 ++-------------------------------
4 files changed, 153 insertions(+), 219 deletions(-)
diff --git a/lib/librte_eal/bsdapp/eal/eal_pci.c b/lib/librte_eal/bsdapp/eal/eal_pci.c
index c7017eb..2a623e3 100644
--- a/lib/librte_eal/bsdapp/eal/eal_pci.c
+++ b/lib/librte_eal/bsdapp/eal/eal_pci.c
@@ -88,7 +88,7 @@ static struct rte_tailq_elem rte_uio_tailq = {
EAL_REGISTER_TAILQ(rte_uio_tailq)
/* unbind kernel driver for this device */
-static int
+int
pci_unbind_kernel_driver(struct rte_pci_device *dev __rte_unused)
{
RTE_LOG(ERR, EAL, "RTE_PCI_DRV_FORCE_UNBIND flag is not implemented "
@@ -430,6 +430,13 @@ skipdev:
return 0;
}
+/* Map pci device */
+int
+pci_map_device(struct rte_pci_device *dev)
+{
+ return pci_uio_map_resource(dev);
+}
+
/*
* Scan the content of the PCI bus, and add the devices in the devices
* list. Call pci_scan_one() for each pci entry found.
@@ -480,71 +487,6 @@ error:
return -1;
}
-/*
- * If vendor/device ID match, call the devinit() function of the
- * driver.
- */
-int
-rte_eal_pci_probe_one_driver(struct rte_pci_driver *dr, struct rte_pci_device *dev)
-{
- const struct rte_pci_id *id_table;
- int ret;
-
- for (id_table = dr->id_table ; id_table->vendor_id != 0; id_table++) {
-
- /* check if device's identifiers match the driver's ones */
- if (id_table->vendor_id != dev->id.vendor_id &&
- id_table->vendor_id != PCI_ANY_ID)
- continue;
- if (id_table->device_id != dev->id.device_id &&
- id_table->device_id != PCI_ANY_ID)
- continue;
- if (id_table->subsystem_vendor_id != dev->id.subsystem_vendor_id &&
- id_table->subsystem_vendor_id != PCI_ANY_ID)
- continue;
- if (id_table->subsystem_device_id != dev->id.subsystem_device_id &&
- id_table->subsystem_device_id != PCI_ANY_ID)
- continue;
-
- struct rte_pci_addr *loc = &dev->addr;
-
- RTE_LOG(DEBUG, EAL, "PCI device "PCI_PRI_FMT" on NUMA socket %i\n",
- loc->domain, loc->bus, loc->devid, loc->function,
- dev->numa_node);
-
- RTE_LOG(DEBUG, EAL, " probe driver: %x:%x %s\n", dev->id.vendor_id,
- dev->id.device_id, dr->name);
-
- /* no initialization when blacklisted, return without error */
- if (dev->devargs != NULL &&
- dev->devargs->type == RTE_DEVTYPE_BLACKLISTED_PCI) {
-
- RTE_LOG(DEBUG, EAL, " Device is blacklisted, not initializing\n");
- return 0;
- }
-
- if (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING) {
- /* map resources for devices that use igb_uio */
- ret = pci_uio_map_resource(dev);
- if (ret != 0)
- return ret;
- } else if (dr->drv_flags & RTE_PCI_DRV_FORCE_UNBIND &&
- rte_eal_process_type() == RTE_PROC_PRIMARY) {
- /* unbind current driver */
- if (pci_unbind_kernel_driver(dev) < 0)
- return -1;
- }
-
- /* reference driver structure */
- dev->driver = dr;
-
- /* call the driver devinit() function */
- return dr->devinit(dr, dev);
- }
- /* return positive value if driver is not found */
- return 1;
-}
-
/* Init the PCI EAL subsystem */
int
rte_eal_pci_init(void)
diff --git a/lib/librte_eal/common/eal_common_pci.c b/lib/librte_eal/common/eal_common_pci.c
index 4229aaf..6eb6257 100644
--- a/lib/librte_eal/common/eal_common_pci.c
+++ b/lib/librte_eal/common/eal_common_pci.c
@@ -99,6 +99,135 @@ static struct rte_devargs *pci_devargs_lookup(struct rte_pci_device *dev)
}
/*
+ * If vendor/device ID match, call the devinit() function of the
+ * driver.
+ */
+static int
+rte_eal_pci_probe_one_driver(struct rte_pci_driver *dr, struct rte_pci_device *dev)
+{
+ int ret;
+ const struct rte_pci_id *id_table;
+
+ for (id_table = dr->id_table; id_table->vendor_id != 0; id_table++) {
+
+ /* check if device's identifiers match the driver's ones */
+ if (id_table->vendor_id != dev->id.vendor_id &&
+ id_table->vendor_id != PCI_ANY_ID)
+ continue;
+ if (id_table->device_id != dev->id.device_id &&
+ id_table->device_id != PCI_ANY_ID)
+ continue;
+ if (id_table->subsystem_vendor_id != dev->id.subsystem_vendor_id &&
+ id_table->subsystem_vendor_id != PCI_ANY_ID)
+ continue;
+ if (id_table->subsystem_device_id != dev->id.subsystem_device_id &&
+ id_table->subsystem_device_id != PCI_ANY_ID)
+ continue;
+
+ struct rte_pci_addr *loc = &dev->addr;
+
+ RTE_LOG(DEBUG, EAL, "PCI device "PCI_PRI_FMT" on NUMA socket %i\n",
+ loc->domain, loc->bus, loc->devid, loc->function,
+ dev->numa_node);
+
+ RTE_LOG(DEBUG, EAL, " probe driver: %x:%x %s\n", dev->id.vendor_id,
+ dev->id.device_id, dr->name);
+
+ /* no initialization when blacklisted, return without error */
+ if (dev->devargs != NULL &&
+ dev->devargs->type == RTE_DEVTYPE_BLACKLISTED_PCI) {
+ RTE_LOG(DEBUG, EAL, " Device is blacklisted, not initializing\n");
+ return 1;
+ }
+
+ if (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING) {
+#ifdef RTE_PCI_CONFIG
+ /*
+ * Set PCIe config space for high performance.
+ * Return value can be ignored.
+ */
+ pci_config_space_set(dev);
+#endif
+ /* map resources for devices that use igb_uio */
+ ret = pci_map_device(dev);
+ if (ret != 0)
+ return ret;
+ } else if (dr->drv_flags & RTE_PCI_DRV_FORCE_UNBIND &&
+ rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ /* unbind current driver */
+ if (pci_unbind_kernel_driver(dev) < 0)
+ return -1;
+ }
+
+ /* reference driver structure */
+ dev->driver = dr;
+
+ /* call the driver devinit() function */
+ return dr->devinit(dr, dev);
+ }
+ /* return positive value if driver is not found */
+ return 1;
+}
+
+#ifdef RTE_LIBRTE_EAL_HOTPLUG
+/*
+ * If vendor/device ID match, call the devuninit() function of the
+ * driver.
+ */
+static int
+rte_eal_pci_close_one_driver(struct rte_pci_driver *dr,
+ struct rte_pci_device *dev)
+{
+ const struct rte_pci_id *id_table;
+
+ if ((dr == NULL) || (dev == NULL))
+ return -EINVAL;
+
+ for (id_table = dr->id_table; id_table->vendor_id != 0; id_table++) {
+
+ /* check if device's identifiers match the driver's ones */
+ if (id_table->vendor_id != dev->id.vendor_id &&
+ id_table->vendor_id != PCI_ANY_ID)
+ continue;
+ if (id_table->device_id != dev->id.device_id &&
+ id_table->device_id != PCI_ANY_ID)
+ continue;
+ if (id_table->subsystem_vendor_id != dev->id.subsystem_vendor_id &&
+ id_table->subsystem_vendor_id != PCI_ANY_ID)
+ continue;
+ if (id_table->subsystem_device_id != dev->id.subsystem_device_id &&
+ id_table->subsystem_device_id != PCI_ANY_ID)
+ continue;
+
+ struct rte_pci_addr *loc = &dev->addr;
+
+ RTE_LOG(DEBUG, EAL, "PCI device "PCI_PRI_FMT" on NUMA socket %i\n",
+ loc->domain, loc->bus, loc->devid,
+ loc->function, dev->numa_node);
+
+ RTE_LOG(DEBUG, EAL, " remove driver: %x:%x %s\n", dev->id.vendor_id,
+ dev->id.device_id, dr->name);
+
+ /* call the driver devuninit() function */
+ if (dr->devuninit && (dr->devuninit(dev) < 0))
+ return -1; /* negative value is an error */
+
+ /* clear driver structure */
+ dev->driver = NULL;
+
+ if (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING)
+ /* unmap resources for devices that use igb_uio */
+ pci_unmap_device(dev);
+
+ return 0;
+ }
+
+ /* return positive value if driver is not found */
+ return 1;
+}
+#endif /* RTE_LIBRTE_EAL_HOTPLUG */
+
+/*
* If vendor/device ID match, call the devinit() function of all
* registered driver for the given device. Return -1 if initialization
* failed, return 1 if no driver is found for this device.
diff --git a/lib/librte_eal/common/eal_private.h b/lib/librte_eal/common/eal_private.h
index 4acf5a0..fe2c596 100644
--- a/lib/librte_eal/common/eal_private.h
+++ b/lib/librte_eal/common/eal_private.h
@@ -154,30 +154,31 @@ struct rte_pci_driver;
struct rte_pci_device;
/**
- * Mmap memory for single PCI device
+ * Unbind kernel driver for this device
*
* This function is private to EAL.
*
* @return
* 0 on success, negative on error
*/
-int rte_eal_pci_probe_one_driver(struct rte_pci_driver *dr,
- struct rte_pci_device *dev);
+int pci_unbind_kernel_driver(struct rte_pci_device *dev);
/**
- * Munmap memory for single PCI device
+ * Map this device
*
* This function is private to EAL.
*
- * @param dr
- * The pointer to the pci driver structure
- * @param dev
- * The pointer to the pci device structure
* @return
* 0 on success, negative on error
*/
-int rte_eal_pci_close_one_driver(struct rte_pci_driver *dr,
- struct rte_pci_device *dev);
+int pci_map_device(struct rte_pci_device *dev);
+
+/**
+ * Unmap this device
+ *
+ * This function is private to EAL.
+ */
+void pci_unmap_device(struct rte_pci_device *dev);
/**
* Init tail queues for non-EAL library structures. This is to allow
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c b/lib/librte_eal/linuxapp/eal/eal_pci.c
index d2adc66..91e958e 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
@@ -57,7 +57,7 @@
*/
/* unbind kernel driver for this device */
-static int
+int
pci_unbind_kernel_driver(struct rte_pci_device *dev)
{
int n;
@@ -563,7 +563,8 @@ pci_config_space_set(struct rte_pci_device *dev)
}
#endif
-static int
+/* Map pci device */
+int
pci_map_device(struct rte_pci_device *dev)
{
int ret = -1;
@@ -592,7 +593,8 @@ pci_map_device(struct rte_pci_device *dev)
}
#ifdef RTE_LIBRTE_EAL_HOTPLUG
-static void
+/* Unmap pci device */
+void
pci_unmap_device(struct rte_pci_device *dev)
{
if (dev == NULL)
@@ -616,146 +618,6 @@ pci_unmap_device(struct rte_pci_device *dev)
}
#endif /* RTE_LIBRTE_EAL_HOTPLUG */
-/*
- * If vendor/device ID match, call the devinit() function of the
- * driver.
- */
-int
-rte_eal_pci_probe_one_driver(struct rte_pci_driver *dr, struct rte_pci_device *dev)
-{
- int ret;
- const struct rte_pci_id *id_table;
-
- for (id_table = dr->id_table; id_table->vendor_id != 0; id_table++) {
-
- /* check if device's identifiers match the driver's ones */
- if (id_table->vendor_id != dev->id.vendor_id &&
- id_table->vendor_id != PCI_ANY_ID)
- continue;
- if (id_table->device_id != dev->id.device_id &&
- id_table->device_id != PCI_ANY_ID)
- continue;
- if (id_table->subsystem_vendor_id != dev->id.subsystem_vendor_id &&
- id_table->subsystem_vendor_id != PCI_ANY_ID)
- continue;
- if (id_table->subsystem_device_id != dev->id.subsystem_device_id &&
- id_table->subsystem_device_id != PCI_ANY_ID)
- continue;
-
- struct rte_pci_addr *loc = &dev->addr;
-
- RTE_LOG(DEBUG, EAL, "PCI device "PCI_PRI_FMT" on NUMA socket %i\n",
- loc->domain, loc->bus, loc->devid, loc->function,
- dev->numa_node);
-
- RTE_LOG(DEBUG, EAL, " probe driver: %x:%x %s\n", dev->id.vendor_id,
- dev->id.device_id, dr->name);
-
- /* no initialization when blacklisted, return without error */
- if (dev->devargs != NULL &&
- dev->devargs->type == RTE_DEVTYPE_BLACKLISTED_PCI) {
- RTE_LOG(DEBUG, EAL, " Device is blacklisted, not initializing\n");
- return 1;
- }
-
- if (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING) {
-#ifdef RTE_PCI_CONFIG
- /*
- * Set PCIe config space for high performance.
- * Return value can be ignored.
- */
- pci_config_space_set(dev);
-#endif
- /* map resources for devices that use igb_uio */
- ret = pci_map_device(dev);
- if (ret != 0)
- return ret;
- } else if (dr->drv_flags & RTE_PCI_DRV_FORCE_UNBIND &&
- rte_eal_process_type() == RTE_PROC_PRIMARY) {
- /* unbind current driver */
- if (pci_unbind_kernel_driver(dev) < 0)
- return -1;
- }
-
- /* reference driver structure */
- dev->driver = dr;
-
- /* call the driver devinit() function */
- return dr->devinit(dr, dev);
- }
- /* return positive value if driver is not found */
- return 1;
-}
-
-#ifdef RTE_LIBRTE_EAL_HOTPLUG
-/*
- * If vendor/device ID match, call the devuninit() function of the
- * driver.
- */
-int
-rte_eal_pci_close_one_driver(struct rte_pci_driver *dr,
- struct rte_pci_device *dev)
-{
- const struct rte_pci_id *id_table;
-
- if ((dr == NULL) || (dev == NULL))
- return -EINVAL;
-
- for (id_table = dr->id_table; id_table->vendor_id != 0; id_table++) {
-
- /* check if device's identifiers match the driver's ones */
- if (id_table->vendor_id != dev->id.vendor_id &&
- id_table->vendor_id != PCI_ANY_ID)
- continue;
- if (id_table->device_id != dev->id.device_id &&
- id_table->device_id != PCI_ANY_ID)
- continue;
- if (id_table->subsystem_vendor_id !=
- dev->id.subsystem_vendor_id &&
- id_table->subsystem_vendor_id != PCI_ANY_ID)
- continue;
- if (id_table->subsystem_device_id !=
- dev->id.subsystem_device_id &&
- id_table->subsystem_device_id != PCI_ANY_ID)
- continue;
-
- struct rte_pci_addr *loc = &dev->addr;
-
- RTE_LOG(DEBUG, EAL,
- "PCI device "PCI_PRI_FMT" on NUMA socket %i\n",
- loc->domain, loc->bus, loc->devid,
- loc->function, dev->numa_node);
-
- RTE_LOG(DEBUG, EAL, " remove driver: %x:%x %s\n",
- dev->id.vendor_id, dev->id.device_id,
- dr->name);
-
- /* call the driver devuninit() function */
- if (dr->devuninit && (dr->devuninit(dev) < 0))
- return -1; /* negative value is an error */
-
- /* clear driver structure */
- dev->driver = NULL;
-
- if (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING)
- /* unmap resources for devices that use igb_uio */
- pci_unmap_device(dev);
-
- return 0;
- }
- /* return positive value if driver is not found */
- return 1;
-}
-#else /* RTE_LIBRTE_EAL_HOTPLUG */
-int
-rte_eal_pci_close_one_driver(struct rte_pci_driver *dr __rte_unused,
- struct rte_pci_device *dev __rte_unused)
-{
- RTE_LOG(ERR, EAL, "Hotplug support isn't enabled\n");
- return -1;
-}
-#endif /* RTE_LIBRTE_EAL_HOTPLUG */
-
/* Init the PCI EAL subsystem */
int
rte_eal_pci_init(void)
--
2.1.4
next prev parent reply other threads:[~2015-05-19 6:22 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-19 6:21 [dpdk-dev] [PATCH 0/8] Add Port Hotplug support to BSD Tetsuya Mukawa
2015-05-19 6:21 ` [dpdk-dev] [PATCH 1/8] eal: Add pci_uio_alloc_uio_resource() Tetsuya Mukawa
2015-05-19 6:21 ` [dpdk-dev] [PATCH 2/8] eal: Add pci_uio_map_uio_resource_by_index() Tetsuya Mukawa
2015-05-19 6:21 ` [dpdk-dev] [PATCH 3/8] eal: Consolidate pci_map and mapped_pci_resource of linuxapp and bsdapp Tetsuya Mukawa
2015-05-19 6:21 ` Tetsuya Mukawa [this message]
2015-06-26 8:21 ` [dpdk-dev] [PATCH v2 0/8] Add Port Hotplug support to BSD Tetsuya Mukawa
2015-06-26 8:21 ` [dpdk-dev] [PATCH v2 1/8] eal: Add pci_uio_alloc_uio_resource() Tetsuya Mukawa
2015-06-26 8:21 ` [dpdk-dev] [PATCH v2 2/8] eal: Add pci_uio_map_uio_resource_by_index() Tetsuya Mukawa
2015-06-26 8:21 ` [dpdk-dev] [PATCH v2 3/8] eal: Consolidate pci_map and mapped_pci_resource of linuxapp and bsdapp Tetsuya Mukawa
2015-06-26 8:21 ` [dpdk-dev] [PATCH v2 4/8] eal: Consolidate rte_eal_pci_probe/close_one_driver() " Tetsuya Mukawa
2015-06-26 8:21 ` [dpdk-dev] [PATCH v2 5/8] eal: Consolidate pci_map/unmap_device() " Tetsuya Mukawa
2015-06-26 8:21 ` [dpdk-dev] [PATCH v2 6/8] eal: Consolidate pci_map/unmap_resource() " Tetsuya Mukawa
2015-06-26 8:21 ` [dpdk-dev] [PATCH v2 7/8] eal: Consolidate pci uio functions " Tetsuya Mukawa
2015-06-26 8:21 ` [dpdk-dev] [PATCH v2 8/8] eal: Enable Port Hotplug as default in Linux and BSD Tetsuya Mukawa
2015-06-29 2:56 ` [dpdk-dev] [PATCH v3 0/8] Add Port Hotplug support to BSD Tetsuya Mukawa
2015-06-29 2:56 ` [dpdk-dev] [PATCH v3 1/8] eal: Add pci_uio_alloc_uio_resource() Tetsuya Mukawa
2015-06-29 13:24 ` Iremonger, Bernard
2015-06-30 2:31 ` Tetsuya Mukawa
2015-06-29 2:56 ` [dpdk-dev] [PATCH v3 2/8] eal: Add pci_uio_map_uio_resource_by_index() Tetsuya Mukawa
2015-06-29 13:36 ` Iremonger, Bernard
2015-06-30 2:34 ` Tetsuya Mukawa
2015-06-29 2:56 ` [dpdk-dev] [PATCH v3 3/8] eal: Consolidate pci_map and mapped_pci_resource of linuxapp and bsdapp Tetsuya Mukawa
2015-06-29 2:56 ` [dpdk-dev] [PATCH v3 4/8] eal: Consolidate rte_eal_pci_probe/close_one_driver() " Tetsuya Mukawa
2015-06-29 15:28 ` Bruce Richardson
2015-06-30 8:08 ` Tetsuya Mukawa
2015-06-30 12:50 ` Bruce Richardson
2015-06-29 2:56 ` [dpdk-dev] [PATCH v3 5/8] eal: Consolidate pci_map/unmap_device() " Tetsuya Mukawa
2015-06-29 2:56 ` [dpdk-dev] [PATCH v3 6/8] eal: Consolidate pci_map/unmap_resource() " Tetsuya Mukawa
2015-06-29 2:56 ` [dpdk-dev] [PATCH v3 7/8] eal: Consolidate pci uio functions " Tetsuya Mukawa
2015-06-29 14:03 ` Iremonger, Bernard
2015-06-30 2:43 ` Tetsuya Mukawa
2015-06-30 8:28 ` Tetsuya Mukawa
2015-06-29 2:56 ` [dpdk-dev] [PATCH v3 8/8] eal: Enable Port Hotplug as default in Linux and BSD Tetsuya Mukawa
2015-06-30 8:26 ` [dpdk-dev] [PATCH v4] Add Port Hotplug support to BSD Tetsuya Mukawa
2015-06-30 8:26 ` [dpdk-dev] [PATCH v4] eal: Enable Port Hotplug as default in Linux and BSD Tetsuya Mukawa
2015-06-30 15:08 ` Iremonger, Bernard
2015-06-30 15:40 ` Bruce Richardson
2015-07-01 6:37 ` Tetsuya Mukawa
2015-07-08 22:15 ` Thomas Monjalon
2015-06-29 15:30 ` [dpdk-dev] [PATCH v3 0/8] Add Port Hotplug support to BSD Bruce Richardson
2015-06-30 8:08 ` Tetsuya Mukawa
2015-05-19 6:21 ` [dpdk-dev] [PATCH 5/8] eal: Consolidate pci_map/unmap_device() of linuxapp and bsdapp Tetsuya Mukawa
2015-05-19 6:21 ` [dpdk-dev] [PATCH 6/8] eal: Consolidate pci_map/unmap_resource() " Tetsuya Mukawa
2015-05-19 6:21 ` [dpdk-dev] [PATCH 7/8] eal: Consolidate pci uio functions " Tetsuya Mukawa
2015-05-19 6:21 ` [dpdk-dev] [PATCH 8/8] eal: Enable Port Hotplug as default in Linux and BSD Tetsuya Mukawa
2015-05-19 16:03 ` [dpdk-dev] [PATCH 0/8] Add Port Hotplug support to BSD Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432016513-8456-5-git-send-email-mukawa@igel.co.jp \
--to=mukawa@igel.co.jp \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).