[dpdk-dev] [PATCH 0/6] Support multiple queues in vhost

[Ouyang Changchun <changchun.ouyang@intel.com>]

This patch set supports the multiple queues for each virtio device in vhost.
The vhost-user is used to enable the multiple queues feature, It's not ready for vhost-cuse.

One prerequisite to enable this feature is that a QEMU patch plus a fix is required to apply
on QEMU2.2/2.3, pls refer to this link for the details of the patch and the fix:
http://lists.nongnu.org/archive/html/qemu-devel/2015-04/msg00917.html

A formal v3 patch for the code change and the fix will be sent to qemu community soon. 
 
Basicaly vhost sample leverages the VMDq+RSS in HW to receive packets and distribute them
into different queue in the pool according to their 5 tuples.
 
On the other hand, it enables multiple queues mode in vhost/virtio layer by setting the queue
number as the value larger than 1.
 
HW queue numbers in pool is required to be exactly same with the queue number in each virtio
device, e.g. rxq = 4, the queue number is 4, it means there are 4 HW queues in each VMDq pool,
and 4 queues in each virtio device/port, every queue in pool maps to one qeueu in virtio device.
 
=========================================
==================|   |==================|
       vport0     |   |      vport1      |
---  ---  ---  ---|   |---  ---  ---  ---|
q0 | q1 | q2 | q3 |   |q0 | q1 | q2 | q3 |
/\= =/\= =/\= =/\=|   |/\= =/\= =/\= =/\=|
||   ||   ||   ||      ||   ||   ||   ||
||   ||   ||   ||      ||   ||   ||   ||
||= =||= =||= =||=|   =||== ||== ||== ||=|
q0 | q1 | q2 | q3 |   |q0 | q1 | q2 | q3 |
 
------------------|   |------------------|
     VMDq pool0   |   |    VMDq pool1    |
==================|   |==================|
 
In RX side, it firstly polls each queue of the pool and gets the packets from
it and enqueue them into its corresponding queue in virtio device/port.
In TX side, it dequeue packets from each queue of virtio device/port and send
to either physical port or another virtio device according to its destination
MAC address.
 
It includes a workaround here in virtio as control queue not work for vhost-user
multiple queues. It needs further investigate to root the cause, hopefully it could
be addressed in next version.

Here is some test guidance.
1. On host, firstly mount hugepage, and insmod uio, igb_uio, bind one nic on igb_uio;
and then run vhost sample, key steps as follows: 
sudo mount -t hugetlbfs nodev /mnt/huge
sudo modprobe uio
sudo insmod $RTE_SDK/$RTE_TARGET/kmod/igb_uio.ko
 
$RTE_SDK/tools/dpdk_nic_bind.py --bind igb_uio 0000:08:00.0
sudo $RTE_SDK/examples/vhost/build/vhost-switch -c 0xf0 -n 4 --huge-dir /mnt/huge --socket-mem 1024,0 -- -p 1 --vm2vm 0 --dev-basename usvhost --rxq 2

2. After step 1, on host, modprobe kvm and kvm_intel, and use qemu command line to start one guest:
modprobe kvm
modprobe kvm_intel
sudo mount -t hugetlbfs nodev /dev/hugepages -o pagesize=1G

$QEMU_PATH/qemu-system-x86_64 -enable-kvm -m 4096 -object memory-backend-file,id=mem,size=4096M,mem-path=/dev/hugepages,share=on -numa node,memdev=mem -mem-prealloc -smp 10 -cpu core2duo,+sse3,+sse4.1,+sse4.2 -name <vm-name> -drive file=<img-path>/vm.img -chardev socket,id=char0,path=<usvhost-path>/usvhost -netdev type=vhost-user,id=hostnet2,chardev=char0,vhostforce=on,queues=2 -device virtio-net-pci,mq=on,vectors=6,netdev=hostnet2,id=net2,mac=52:54:00:12:34:56,csum=off,gso=off,guest_tso4=off,guest_tso6=off,guest_ecn=off -chardev socket,id=char1,path=<usvhost-path>/usvhost -netdev type=vhost-user,id=hostnet3,chardev=char1,vhostforce=on,queues=2 -device virtio-net-pci,mq=on,vectors=6,netdev=hostnet3,id=net3,mac=52:54:00:12:34:57,csum=off,gso=off,guest_tso4=off,guest_tso6=off,guest_ecn=off

3. Log on guest, use testpmd(dpdk based) to test, use multiple virtio queues to rx and tx packets.
modprobe uio
insmod $RTE_SDK/$RTE_TARGET/kmod/igb_uio.ko
echo 1024 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
./tools/dpdk_nic_bind.py --bind igb_uio 00:03.0 00:04.0 
 
$RTE_SDK/$RTE_TARGET/app/testpmd -c 1f -n 4 -- --rxq=2 --txq=2 --nb-cores=4 --rx-queue-stats-mapping="(0,0,0),(0,1,1),(1,0,2),(1,1,3)" --tx-queue-stats-mapping="(0,0,0),(0,1,1),(1,0,2),(1,1,3)" -i --disable-hw-vlan --txqflags 0xf00

4. Use packet generator to send packets with dest MAC:52 54 00 12 34 57  VLAN tag:1001,
select IPv4 as protocols and continuous incremental IP address.

5. Testpmd on guest can display packets received/transmitted in both queues of each virtio port.

Changchun Ouyang (6):
  ixgbe: Support VMDq RSS in non-SRIOV environment
  lib_vhost: Support multiple queues in virtio dev
  lib_vhost: Set memory layout for multiple queues mode
  vhost: Add new command line option: rxq
  vhost: Support multiple queues
  virtio: Resolve for control queue

 examples/vhost/main.c                         | 199 +++++++++++++++++---------
 lib/librte_ether/rte_ethdev.c                 |  40 ++++++
 lib/librte_pmd_ixgbe/ixgbe_rxtx.c             |  82 +++++++++--
 lib/librte_pmd_virtio/virtio_ethdev.c         |   6 +
 lib/librte_vhost/rte_virtio_net.h             |  25 +++-
 lib/librte_vhost/vhost_cuse/virtio-net-cdev.c |  57 ++++----
 lib/librte_vhost/vhost_rxtx.c                 |  53 +++----
 lib/librte_vhost/vhost_user/vhost-net-user.c  |   4 +-
 lib/librte_vhost/vhost_user/virtio-net-user.c | 156 ++++++++++++++------
 lib/librte_vhost/vhost_user/virtio-net-user.h |   2 +
 lib/librte_vhost/virtio-net.c                 | 158 ++++++++++++--------
 11 files changed, 545 insertions(+), 237 deletions(-)

-- 
1.8.4.2