DPDK patches and discussions
 help / color / mirror / Atom feed
From: Shaopeng He <shaopeng.he@intel.com>
To: dev@dpdk.org
Cc: Shaopeng He <shaopeng.he@intel.com>
Subject: [dpdk-dev] [PATCH] fm10k: fix PF/VF MAC address register and clean up bug
Date: Fri,  5 Jun 2015 11:24:32 +0800	[thread overview]
Message-ID: <1433474672-30951-1-git-send-email-shaopeng.he@intel.com> (raw)

MAC address with fixed VLAN 0 was removed. VF MAC/VLAN filter was enabled
for the default value. Removed all VLAN and MAC address table entries when
the system(e.g. testpmd) was closed.

Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
---
 drivers/net/fm10k/fm10k_ethdev.c | 38 +++++++++++++++++++++++---------------
 1 file changed, 23 insertions(+), 15 deletions(-)

diff --git a/drivers/net/fm10k/fm10k_ethdev.c b/drivers/net/fm10k/fm10k_ethdev.c
index 9b198a7..587debc 100644
--- a/drivers/net/fm10k/fm10k_ethdev.c
+++ b/drivers/net/fm10k/fm10k_ethdev.c
@@ -58,6 +58,8 @@ static int
 fm10k_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on);
 static void
 fm10k_MAC_filter_set(struct rte_eth_dev *dev, const u8 *mac, bool add);
+static void
+fm10k_MACVLAN_remove_all(struct rte_eth_dev *dev);
 
 static void
 fm10k_mbx_initlock(struct fm10k_hw *hw)
@@ -703,6 +705,8 @@ fm10k_dev_close(struct rte_eth_dev *dev)
 
 	PMD_INIT_FUNC_TRACE();
 
+	fm10k_MACVLAN_remove_all(dev);
+
 	/* Stop mailbox service first */
 	fm10k_close_mbx_service(hw);
 	fm10k_dev_stop(dev);
@@ -830,10 +834,6 @@ fm10k_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
 	hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 	macvlan = FM10K_DEV_PRIVATE_TO_MACVLAN(dev->data->dev_private);
 
-	/* @todo - add support for the VF */
-	if (hw->mac.type != fm10k_mac_pf)
-		return -ENOTSUP;
-
 	if (vlan_id > ETH_VLAN_ID_MAX) {
 		PMD_INIT_LOG(ERR, "Invalid vlan_id: must be < 4096");
 		return (-EINVAL);
@@ -916,10 +916,6 @@ fm10k_MAC_filter_set(struct rte_eth_dev *dev, const u8 *mac, bool add)
 	hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 	macvlan = FM10K_DEV_PRIVATE_TO_MACVLAN(dev->data->dev_private);
 
-	/* @todo - add support for the VF */
-	if (hw->mac.type != fm10k_mac_pf)
-		return;
-
 	fm10k_mbx_lock(hw);
 	i = 0;
 	for (j = 0; j < FM10K_VFTA_SIZE; j++) {
@@ -970,6 +966,25 @@ fm10k_macaddr_remove(struct rte_eth_dev *dev, uint32_t index)
 				FALSE);
 }
 
+/* Remove all VLAN and MAC address table entries */
+static void
+fm10k_MACVLAN_remove_all(struct rte_eth_dev *dev)
+{
+	uint32_t j, k;
+	struct fm10k_macvlan_filter_info *macvlan;
+
+	macvlan = FM10K_DEV_PRIVATE_TO_MACVLAN(dev->data->dev_private);
+	for (j = 0; j < FM10K_VFTA_SIZE; j++) {
+		if (macvlan->vfta[j]) {
+			for (k = 0; k < FM10K_UINT32_BIT_SIZE; k++) {
+				if (macvlan->vfta[j] & (1 << k))
+					fm10k_vlan_filter_set(dev,
+						j * FM10K_UINT32_BIT_SIZE + k, false);
+			}
+		}
+	}
+}
+
 static inline int
 check_nb_desc(uint16_t min, uint16_t max, uint16_t mult, uint16_t request)
 {
@@ -1997,13 +2012,6 @@ eth_fm10k_dev_init(struct rte_eth_dev *dev)
 	/* Enable port first */
 	hw->mac.ops.update_lport_state(hw, hw->mac.dglort_map, 1, 1);
 
-	/*
-	 * Add default mac. glort is assigned by SM for PF, while is
-	 * unused for VF. PF will assign correct glort for VF.
-	 */
-	hw->mac.ops.update_uc_addr(hw, hw->mac.dglort_map, hw->mac.addr,
-				0, 1, 0);
-
 	/* Set unicast mode by default. App can change to other mode in other
 	 * API func.
 	 */
-- 
1.9.3

             reply	other threads:[~2015-06-05  3:24 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-05  3:24 Shaopeng He [this message]
2015-06-05  8:55 ` Thomas Monjalon
2015-06-08  0:59   ` He, Shaopeng
2015-06-15  1:26 ` [dpdk-dev] [PATCH v2] " Shaopeng He
2015-06-16  6:43   ` Chen, Jing D
2015-06-22 15:15     ` Thomas Monjalon
2015-06-16 11:54   ` Qiu, Michael

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1433474672-30951-1-git-send-email-shaopeng.he@intel.com \
    --to=shaopeng.he@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).