From: Jingjing Wu <jingjing.wu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v3 1/4] ethdev: rename rte_eth_vmdq_mirror_conf
Date: Fri, 5 Jun 2015 16:16:03 +0800 [thread overview]
Message-ID: <1433492166-30758-2-git-send-email-jingjing.wu@intel.com> (raw)
In-Reply-To: <1433492166-30758-1-git-send-email-jingjing.wu@intel.com>
rename rte_eth_vmdq_mirror_conf to rte_eth_mirror_conf and move
the maximum rule id check from ethdev level to driver
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
---
app/test-pmd/cmdline.c | 22 +++++++++++-----------
drivers/net/ixgbe/ixgbe_ethdev.c | 11 +++++++----
drivers/net/ixgbe/ixgbe_ethdev.h | 4 +++-
lib/librte_ether/rte_ethdev.c | 18 ++----------------
lib/librte_ether/rte_ethdev.h | 19 ++++++++++---------
5 files changed, 33 insertions(+), 41 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index f01db2a..d693bde 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -6604,11 +6604,11 @@ cmd_set_mirror_mask_parsed(void *parsed_result,
{
int ret,nb_item,i;
struct cmd_set_mirror_mask_result *res = parsed_result;
- struct rte_eth_vmdq_mirror_conf mr_conf;
+ struct rte_eth_mirror_conf mr_conf;
- memset(&mr_conf,0,sizeof(struct rte_eth_vmdq_mirror_conf));
+ memset(&mr_conf, 0, sizeof(struct rte_eth_mirror_conf));
- unsigned int vlan_list[ETH_VMDQ_MAX_VLAN_FILTERS];
+ unsigned int vlan_list[ETH_MIRROR_MAX_VLANS];
mr_conf.dst_pool = res->dstpool_id;
@@ -6618,11 +6618,11 @@ cmd_set_mirror_mask_parsed(void *parsed_result,
} else if(!strcmp(res->what, "vlan-mirror")) {
mr_conf.rule_type_mask = ETH_VMDQ_VLAN_MIRROR;
nb_item = parse_item_list(res->value, "core",
- ETH_VMDQ_MAX_VLAN_FILTERS,vlan_list,1);
+ ETH_MIRROR_MAX_VLANS, vlan_list, 1);
if (nb_item <= 0)
return;
- for(i=0; i < nb_item; i++) {
+ for (i = 0; i < nb_item; i++) {
if (vlan_list[i] > ETHER_MAX_VLAN_ID) {
printf("Invalid vlan_id: must be < 4096\n");
return;
@@ -6634,10 +6634,10 @@ cmd_set_mirror_mask_parsed(void *parsed_result,
}
if(!strcmp(res->on, "on"))
- ret = rte_eth_mirror_rule_set(res->port_id,&mr_conf,
+ ret = rte_eth_mirror_rule_set(res->port_id, &mr_conf,
res->rule_id, 1);
else
- ret = rte_eth_mirror_rule_set(res->port_id,&mr_conf,
+ ret = rte_eth_mirror_rule_set(res->port_id, &mr_conf,
res->rule_id, 0);
if(ret < 0)
printf("mirror rule add error: (%s)\n", strerror(-ret));
@@ -6711,9 +6711,9 @@ cmd_set_mirror_link_parsed(void *parsed_result,
{
int ret;
struct cmd_set_mirror_link_result *res = parsed_result;
- struct rte_eth_vmdq_mirror_conf mr_conf;
+ struct rte_eth_mirror_conf mr_conf;
- memset(&mr_conf,0,sizeof(struct rte_eth_vmdq_mirror_conf));
+ memset(&mr_conf, 0, sizeof(struct rte_eth_mirror_conf));
if(!strcmp(res->what, "uplink-mirror")) {
mr_conf.rule_type_mask = ETH_VMDQ_UPLINK_MIRROR;
}else if(!strcmp(res->what, "downlink-mirror"))
@@ -6722,10 +6722,10 @@ cmd_set_mirror_link_parsed(void *parsed_result,
mr_conf.dst_pool = res->dstpool_id;
if(!strcmp(res->on, "on"))
- ret = rte_eth_mirror_rule_set(res->port_id,&mr_conf,
+ ret = rte_eth_mirror_rule_set(res->port_id, &mr_conf,
res->rule_id, 1);
else
- ret = rte_eth_mirror_rule_set(res->port_id,&mr_conf,
+ ret = rte_eth_mirror_rule_set(res->port_id, &mr_conf,
res->rule_id, 0);
/* check the return value and print it if is < 0 */
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 0d9f9b2..9e767fa 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -209,7 +209,7 @@ static int ixgbe_set_pool_tx(struct rte_eth_dev *dev,uint16_t pool,uint8_t on);
static int ixgbe_set_pool_vlan_filter(struct rte_eth_dev *dev, uint16_t vlan,
uint64_t pool_mask,uint8_t vlan_on);
static int ixgbe_mirror_rule_set(struct rte_eth_dev *dev,
- struct rte_eth_vmdq_mirror_conf *mirror_conf,
+ struct rte_eth_mirror_conf *mirror_conf,
uint8_t rule_id, uint8_t on);
static int ixgbe_mirror_rule_reset(struct rte_eth_dev *dev,
uint8_t rule_id);
@@ -3388,7 +3388,7 @@ ixgbe_set_pool_vlan_filter(struct rte_eth_dev *dev, uint16_t vlan,
static int
ixgbe_mirror_rule_set(struct rte_eth_dev *dev,
- struct rte_eth_vmdq_mirror_conf *mirror_conf,
+ struct rte_eth_mirror_conf *mirror_conf,
uint8_t rule_id, uint8_t on)
{
uint32_t mr_ctl,vlvf;
@@ -3412,7 +3412,10 @@ ixgbe_mirror_rule_set(struct rte_eth_dev *dev,
IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
if (ixgbe_vmdq_mode_check(hw) < 0)
- return (-ENOTSUP);
+ return -ENOTSUP;
+
+ if (rule_id >= IXGBE_MAX_MIRROR_RULES)
+ return -EINVAL;
/* Check if vlan mask is valid */
if ((mirror_conf->rule_type_mask & ETH_VMDQ_VLAN_MIRROR) && (on)) {
@@ -3526,7 +3529,7 @@ ixgbe_mirror_rule_reset(struct rte_eth_dev *dev, uint8_t rule_id)
return (-ENOTSUP);
memset(&mr_info->mr_conf[rule_id], 0,
- sizeof(struct rte_eth_vmdq_mirror_conf));
+ sizeof(struct rte_eth_mirror_conf));
/* clear PFVMCTL register */
IXGBE_WRITE_REG(hw, IXGBE_MRCTL(rule_id), mr_ctl);
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
index 19237b8..755b674 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.h
+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
@@ -177,8 +177,10 @@ struct ixgbe_uta_info {
uint32_t uta_shadow[IXGBE_MAX_UTA];
};
+#define IXGBE_MAX_MIRROR_RULES 4 /* Maximum nb. of mirror rules. */
+
struct ixgbe_mirror_info {
- struct rte_eth_vmdq_mirror_conf mr_conf[ETH_VMDQ_NUM_MIRROR_RULE];
+ struct rte_eth_mirror_conf mr_conf[IXGBE_MAX_MIRROR_RULES];
/**< store PF mirror rules configuration*/
};
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 024fe8b..43c7295 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -3034,7 +3034,7 @@ int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf, uint16_t tx_rate,
int
rte_eth_mirror_rule_set(uint8_t port_id,
- struct rte_eth_vmdq_mirror_conf *mirror_conf,
+ struct rte_eth_mirror_conf *mirror_conf,
uint8_t rule_id, uint8_t on)
{
struct rte_eth_dev *dev = &rte_eth_devices[port_id];
@@ -3051,7 +3051,7 @@ rte_eth_mirror_rule_set(uint8_t port_id,
if (mirror_conf->dst_pool >= ETH_64_POOLS) {
PMD_DEBUG_TRACE("Invalid dst pool, pool id must"
- "be 0-%d\n",ETH_64_POOLS - 1);
+ "be 0-%d\n", ETH_64_POOLS - 1);
return -EINVAL;
}
@@ -3062,13 +3062,6 @@ rte_eth_mirror_rule_set(uint8_t port_id,
return -EINVAL;
}
- if(rule_id >= ETH_VMDQ_NUM_MIRROR_RULE)
- {
- PMD_DEBUG_TRACE("Invalid rule_id, rule_id must be 0-%d\n",
- ETH_VMDQ_NUM_MIRROR_RULE - 1);
- return -EINVAL;
- }
-
dev = &rte_eth_devices[port_id];
FUNC_PTR_OR_ERR_RET(*dev->dev_ops->mirror_rule_set, -ENOTSUP);
@@ -3085,13 +3078,6 @@ rte_eth_mirror_rule_reset(uint8_t port_id, uint8_t rule_id)
return -ENODEV;
}
- if(rule_id >= ETH_VMDQ_NUM_MIRROR_RULE)
- {
- PMD_DEBUG_TRACE("Invalid rule_id, rule_id must be 0-%d\n",
- ETH_VMDQ_NUM_MIRROR_RULE-1);
- return -EINVAL;
- }
-
dev = &rte_eth_devices[port_id];
FUNC_PTR_OR_ERR_RET(*dev->dev_ops->mirror_rule_reset, -ENOTSUP);
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 16dbe00..ae22fea 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -467,8 +467,8 @@ struct rte_eth_rss_conf {
#define ETH_VMDQ_ACCEPT_BROADCAST 0x0008 /**< accept broadcast packets. */
#define ETH_VMDQ_ACCEPT_MULTICAST 0x0010 /**< multicast promiscuous. */
-/* Definitions used for VMDQ mirror rules setting */
-#define ETH_VMDQ_NUM_MIRROR_RULE 4 /**< Maximum nb. of mirror rules. . */
+/** Maximum nb. of vlan per mirror rule */
+#define ETH_MIRROR_MAX_VLANS 64
#define ETH_VMDQ_POOL_MIRROR 0x0001 /**< Virtual Pool Mirroring. */
#define ETH_VMDQ_UPLINK_MIRROR 0x0002 /**< Uplink Port Mirroring. */
@@ -480,18 +480,19 @@ struct rte_eth_rss_conf {
*/
struct rte_eth_vlan_mirror {
uint64_t vlan_mask; /**< mask for valid VLAN ID. */
- uint16_t vlan_id[ETH_VMDQ_MAX_VLAN_FILTERS];
- /** VLAN ID list for vlan mirror. */
+ /** VLAN ID list for vlan mirroring. */
+ uint16_t vlan_id[ETH_MIRROR_MAX_VLANS];
};
/**
* A structure used to configure traffic mirror of an Ethernet port.
*/
-struct rte_eth_vmdq_mirror_conf {
+struct rte_eth_mirror_conf {
uint8_t rule_type_mask; /**< Mirroring rule type mask we want to set */
- uint8_t dst_pool; /**< Destination pool for this mirror rule. */
+ uint8_t dst_pool; /**< Destination pool for this mirror rule. */
uint64_t pool_mask; /**< Bitmap of pool for pool mirroring */
- struct rte_eth_vlan_mirror vlan; /**< VLAN ID setting for VLAN mirroring */
+ /** VLAN ID setting for VLAN mirroring. */
+ struct rte_eth_vlan_mirror vlan;
};
/**
@@ -1211,7 +1212,7 @@ typedef int (*eth_set_vf_rate_limit_t)(struct rte_eth_dev *dev,
/**< @internal Set VF TX rate */
typedef int (*eth_mirror_rule_set_t)(struct rte_eth_dev *dev,
- struct rte_eth_vmdq_mirror_conf *mirror_conf,
+ struct rte_eth_mirror_conf *mirror_conf,
uint8_t rule_id,
uint8_t on);
/**< @internal Add a traffic mirroring rule on an Ethernet device */
@@ -3168,7 +3169,7 @@ rte_eth_dev_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id,
* - (-EINVAL) if the mr_conf information is not correct.
*/
int rte_eth_mirror_rule_set(uint8_t port_id,
- struct rte_eth_vmdq_mirror_conf *mirror_conf,
+ struct rte_eth_mirror_conf *mirror_conf,
uint8_t rule_id,
uint8_t on);
--
1.9.3
next prev parent reply other threads:[~2015-06-05 8:16 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-13 8:47 [dpdk-dev] [PATCH 0/3] enable mirror functionality in i40e driver Jingjing Wu
2015-05-13 8:47 ` [dpdk-dev] [PATCH 1/3] ethdev: rename rte_eth_vmdq_mirror_conf Jingjing Wu
2015-06-02 2:50 ` Liu, Jijiang
2015-05-13 8:47 ` [dpdk-dev] [PATCH 2/3] ethdev: redefine the mirror type Jingjing Wu
2015-05-13 8:47 ` [dpdk-dev] [PATCH 3/3] i40e: enable mirror functionality in i40e driver Jingjing Wu
2015-06-02 7:55 ` [dpdk-dev] [PATCH v2 0/4] " Jingjing Wu
2015-06-02 7:55 ` [dpdk-dev] [PATCH v2 1/4] ethdev: rename rte_eth_vmdq_mirror_conf Jingjing Wu
2015-06-02 7:55 ` [dpdk-dev] [PATCH v2 2/4] ethdev: redefine the mirror type Jingjing Wu
2015-06-02 7:55 ` [dpdk-dev] [PATCH v2 3/4] i40e: enable mirror functionality in i40e driver Jingjing Wu
2015-06-02 7:56 ` [dpdk-dev] [PATCH v2 4/4] doc: modify the command about mirror in testpmd guide Jingjing Wu
2015-06-05 8:16 ` [dpdk-dev] [PATCH v3 0/4] enable mirror functionality in i40e driver Jingjing Wu
2015-06-05 8:16 ` Jingjing Wu [this message]
2015-06-05 8:16 ` [dpdk-dev] [PATCH v3 2/4] ethdev: redefine the mirror type Jingjing Wu
2015-06-05 8:16 ` [dpdk-dev] [PATCH v3 3/4] i40e: enable mirror functionality in i40e driver Jingjing Wu
2015-06-05 8:16 ` [dpdk-dev] [PATCH v3 4/4] doc: modify the command about mirror in testpmd guide Jingjing Wu
2015-06-10 6:24 ` [dpdk-dev] [PATCH v4 0/4] enable mirror functionality in i40e driver Jingjing Wu
2015-06-10 6:24 ` [dpdk-dev] [PATCH v4 1/4] ethdev: rename rte_eth_vmdq_mirror_conf Jingjing Wu
2015-06-26 7:03 ` Wu, Jingjing
2015-07-06 1:27 ` Wu, Jingjing
2015-07-07 14:51 ` Thomas Monjalon
2015-07-08 0:58 ` Wu, Jingjing
2015-07-08 10:31 ` Mcnamara, John
2015-07-08 10:35 ` Bruce Richardson
2015-06-10 6:24 ` [dpdk-dev] [PATCH v4 2/4] ethdev: rename and extend the mirror type Jingjing Wu
2015-06-10 6:24 ` [dpdk-dev] [PATCH v4 3/4] i40e: enable mirror functionality in i40e driver Jingjing Wu
2015-06-10 6:24 ` [dpdk-dev] [PATCH v4 4/4] doc: modify the command about mirror in testpmd guide Jingjing Wu
2015-06-10 8:33 ` [dpdk-dev] [PATCH v4 0/4] enable mirror functionality in i40e driver Jiajia, SunX
2015-06-12 8:18 ` Liu, Jijiang
2015-06-12 8:44 ` Zhang, Helin
2015-07-07 15:46 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433492166-30758-2-git-send-email-jingjing.wu@intel.com \
--to=jingjing.wu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).