From: Bruce Richardson <bruce.richardson@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [RFC-PATCH-v3 4/6] new pktdev l2fwd sample
Date: Wed, 10 Jun 2015 14:07:19 +0100 [thread overview]
Message-ID: <1433941641-19405-5-git-send-email-bruce.richardson@intel.com> (raw)
In-Reply-To: <1433941641-19405-1-git-send-email-bruce.richardson@intel.com>
This patch takes the existing l2fwd example application and modifies it
to use pktdevs instead of ethdevs directly. The code is shorter, as we are able
to take advantage of the TX buffering provided by pktdev.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
examples/pktdev-l2fwd/Makefile | 50 ++++
examples/pktdev-l2fwd/main.c | 530 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 580 insertions(+)
create mode 100644 examples/pktdev-l2fwd/Makefile
create mode 100644 examples/pktdev-l2fwd/main.c
diff --git a/examples/pktdev-l2fwd/Makefile b/examples/pktdev-l2fwd/Makefile
new file mode 100644
index 0000000..78feeeb
--- /dev/null
+++ b/examples/pktdev-l2fwd/Makefile
@@ -0,0 +1,50 @@
+# BSD LICENSE
+#
+# Copyright(c) 2015 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = l2fwd
+
+# all source are stored in SRCS-y
+SRCS-y := main.c
+
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/pktdev-l2fwd/main.c b/examples/pktdev-l2fwd/main.c
new file mode 100644
index 0000000..851922f
--- /dev/null
+++ b/examples/pktdev-l2fwd/main.c
@@ -0,0 +1,530 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <getopt.h>
+
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_cycles.h>
+#include <rte_lcore.h>
+#include <rte_pktdev.h>
+
+#define RTE_LOGTYPE_L2FWD RTE_LOGTYPE_USER1
+
+#define NB_MBUF 8192
+#define MAX_PKT_BURST 32
+
+/*
+ * Configurable number of RX/TX ring descriptors
+ */
+#define RTE_TEST_RX_DESC_DEFAULT 128
+#define RTE_TEST_TX_DESC_DEFAULT 512
+static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
+static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
+
+/* ethernet addresses of ports */
+static struct ether_addr l2fwd_ports_eth_addr[RTE_MAX_ETHPORTS];
+
+/* mask of enabled ports */
+static uint32_t l2fwd_enabled_port_mask = 0;
+
+/* The actual port devices to be used */
+static struct rte_pktdev *devs[RTE_MAX_ETHPORTS];
+static uint8_t nb_devs;
+
+static unsigned int l2fwd_rx_queue_per_lcore = 1;
+
+static const struct rte_eth_conf port_conf = {
+ .txmode = {
+ .mq_mode = ETH_MQ_TX_NONE,
+ },
+};
+
+struct rte_mempool * l2fwd_pktmbuf_pool = NULL;
+
+#define MAX_RX_QUEUE_PER_LCORE 16
+
+struct lcore_queue_conf {
+ unsigned n_rx_port;
+ unsigned inputs[MAX_RX_QUEUE_PER_LCORE];
+ unsigned outputs[MAX_RX_QUEUE_PER_LCORE];
+} __rte_cache_aligned;
+struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
+
+/* A tsc-based timer responsible for triggering statistics printout */
+#define MAX_TIMER_PERIOD 86400 /* 1 day max */
+static int64_t timer_period = 10; /* default of 10 seconds */
+
+/* Print out statistics on packets dropped */
+static void
+print_stats(void)
+{
+ uint64_t total_packets_dropped, total_packets_tx, total_packets_rx;
+ unsigned portid;
+
+ total_packets_dropped = 0;
+ total_packets_tx = 0;
+ total_packets_rx = 0;
+
+ const char clr[] = { 27, '[', '2', 'J', '\0' };
+ const char topLeft[] = { 27, '[', '1', ';', '1', 'H','\0' };
+
+ /* Clear screen and move to top left */
+ printf("%s%s", clr, topLeft);
+
+ printf("\nPort statistics ====================================");
+
+ for (portid = 0; portid < nb_devs; portid++) {
+ char name[64];
+ struct rte_pktdev *dev = devs[portid];
+ printf("\nStatistics for %s ------------------------------"
+ "\nPackets sent: %24"PRIu64
+ "\nPackets received: %20"PRIu64
+ "\nPackets dropped: %21"PRIu64,
+ rte_pktdev_get_name(dev, name, sizeof(name)),
+ rte_pktdev_get_tx_count(dev),
+ rte_pktdev_get_rx_count(dev),
+ rte_pktdev_get_tx_drop_count(dev));
+
+ total_packets_dropped += rte_pktdev_get_tx_drop_count(dev);
+ total_packets_tx += rte_pktdev_get_tx_count(dev);
+ total_packets_rx += rte_pktdev_get_rx_count(dev);
+ }
+ printf("\nAggregate statistics ==============================="
+ "\nTotal packets sent: %18"PRIu64
+ "\nTotal packets received: %14"PRIu64
+ "\nTotal packets dropped: %15"PRIu64,
+ total_packets_tx,
+ total_packets_rx,
+ total_packets_dropped);
+ printf("\n====================================================\n");
+}
+
+static void
+l2fwd_simple_forward(struct rte_mbuf *m, unsigned dst_port)
+{
+ struct ether_hdr *eth;
+ void *tmp;
+
+ eth = rte_pktmbuf_mtod(m, struct ether_hdr *);
+
+ /* 02:00:00:00:00:xx */
+ tmp = ð->d_addr.addr_bytes[0];
+ *((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dst_port << 40);
+
+ /* src addr */
+ ether_addr_copy(&l2fwd_ports_eth_addr[dst_port], ð->s_addr);
+
+ rte_pkt_tx_buffer(devs[dst_port], m);
+}
+
+/* main processing loop */
+static void
+l2fwd_main_loop(void)
+{
+ unsigned i, j;
+ uint64_t cur_tsc, prev_tsc = 0;
+ const unsigned lcore_id = rte_lcore_id();
+ const struct lcore_queue_conf *qconf = &lcore_queue_conf[lcore_id];
+ const int do_print = (lcore_id == rte_get_master_lcore() &&
+ timer_period > 0);
+
+ if (qconf->n_rx_port == 0) {
+ RTE_LOG(INFO, L2FWD, "lcore %u has nothing to do\n", lcore_id);
+ return;
+ }
+
+ RTE_LOG(INFO, L2FWD, "entering main loop on lcore %u\n", lcore_id);
+
+ for (i = 0; i < qconf->n_rx_port; i++) {
+ char buffer[64];
+ rte_pktdev_get_name(devs[qconf->inputs[i]],
+ buffer, sizeof(buffer));
+ RTE_LOG(INFO, L2FWD, " -- lcoreid=%u %s\n", lcore_id,
+ buffer);
+ }
+
+ for (;;) {
+ if (do_print) {
+ cur_tsc = rte_rdtsc();
+ if ((cur_tsc - prev_tsc) >= (uint64_t)timer_period) {
+ print_stats();
+ prev_tsc = cur_tsc;
+ }
+ }
+ for (i = 0; i < qconf->n_rx_port; i++) {
+ struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ const unsigned portid = qconf->inputs[i];
+ const uint16_t nb_rx = rte_pkt_rx_burst(devs[portid],
+ pkts_burst, MAX_PKT_BURST);
+
+ if (nb_rx == 0) {
+ rte_pkt_tx_buffer_flush(devs[portid]);
+ continue;
+ }
+
+ for (j = 0; j < nb_rx; j++) {
+ struct rte_mbuf *m = pkts_burst[j];
+ rte_prefetch0(rte_pktmbuf_mtod(m, void *));
+ l2fwd_simple_forward(m, qconf->outputs[i]);
+ }
+ }
+ }
+}
+
+static int
+l2fwd_launch_one_lcore(__attribute__((unused)) void *dummy)
+{
+ l2fwd_main_loop();
+ return 0;
+}
+
+/* display usage */
+static void
+l2fwd_usage(const char *prgname)
+{
+ printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
+ " -p PORTMASK: hexadecimal bitmask of ports to configure\n"
+ " -q NQ: number of queue (=ports) per lcore (default is 1)\n"
+ " -T PERIOD: statistics will be refreshed each PERIOD seconds (0 to disable, 10 default, 86400 maximum)\n",
+ prgname);
+}
+
+static int
+l2fwd_parse_portmask(const char *portmask)
+{
+ char *end = NULL;
+ unsigned long pm;
+
+ /* parse hexadecimal string */
+ pm = strtoul(portmask, &end, 16);
+ if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return -1;
+
+ if (pm == 0)
+ return -1;
+
+ return pm;
+}
+
+static unsigned int
+l2fwd_parse_nqueue(const char *q_arg)
+{
+ char *end = NULL;
+ unsigned long n;
+
+ /* parse hexadecimal string */
+ n = strtoul(q_arg, &end, 10);
+ if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return 0;
+ if (n == 0)
+ return 0;
+ if (n >= MAX_RX_QUEUE_PER_LCORE)
+ return 0;
+
+ return n;
+}
+
+static int
+l2fwd_parse_timer_period(const char *q_arg)
+{
+ char *end = NULL;
+ int n;
+
+ /* parse number string */
+ n = strtol(q_arg, &end, 10);
+ if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return -1;
+ if (n >= MAX_TIMER_PERIOD)
+ return -1;
+
+ return n;
+}
+
+/* Parse the argument given in the command line of the application */
+static int
+l2fwd_parse_args(int argc, char **argv)
+{
+ int opt, ret;
+ char **argvopt;
+ int option_index;
+ char *prgname = argv[0];
+ static struct option lgopts[] = {
+ {NULL, 0, 0, 0}
+ };
+
+ argvopt = argv;
+
+ while ((opt = getopt_long(argc, argvopt, "p:q:T:",
+ lgopts, &option_index)) != EOF) {
+
+ switch (opt) {
+ /* portmask */
+ case 'p':
+ l2fwd_enabled_port_mask = l2fwd_parse_portmask(optarg);
+ if (l2fwd_enabled_port_mask == 0) {
+ printf("invalid portmask\n");
+ l2fwd_usage(prgname);
+ return -1;
+ }
+ break;
+
+ /* nqueue */
+ case 'q':
+ l2fwd_rx_queue_per_lcore = l2fwd_parse_nqueue(optarg);
+ if (l2fwd_rx_queue_per_lcore == 0) {
+ printf("invalid queue number\n");
+ l2fwd_usage(prgname);
+ return -1;
+ }
+ break;
+
+ /* timer period */
+ case 'T':
+ timer_period = l2fwd_parse_timer_period(optarg);
+ if (timer_period < 0) {
+ printf("invalid timer period\n");
+ l2fwd_usage(prgname);
+ return -1;
+ }
+ break;
+
+ /* long options */
+ case 0:
+ l2fwd_usage(prgname);
+ return -1;
+
+ default:
+ l2fwd_usage(prgname);
+ return -1;
+ }
+ }
+
+ if (optind >= 0)
+ argv[optind-1] = prgname;
+
+ ret = optind-1;
+ optind = 0; /* reset getopt lib */
+ return ret;
+}
+
+/* Check the link status of all ports in up to 9s, and print them finally */
+static void
+check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
+{
+#define CHECK_INTERVAL 100 /* 100ms */
+#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
+ uint8_t portid, count, all_ports_up, print_flag = 0;
+ struct rte_eth_link link;
+
+ printf("\nChecking link status");
+ fflush(stdout);
+ for (count = 0; count <= MAX_CHECK_TIME; count++) {
+ all_ports_up = 1;
+ for (portid = 0; portid < port_num; portid++) {
+ if ((port_mask & (1 << portid)) == 0)
+ continue;
+ memset(&link, 0, sizeof(link));
+ rte_eth_link_get_nowait(portid, &link);
+ /* print link status if flag set */
+ if (print_flag == 1) {
+ if (link.link_status)
+ printf("Port %d Link Up - speed %u "
+ "Mbps - %s\n", (uint8_t)portid,
+ (unsigned)link.link_speed,
+ (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
+ ("full-duplex") : ("half-duplex\n"));
+ else
+ printf("Port %d Link Down\n",
+ (uint8_t)portid);
+ continue;
+ }
+ /* clear all_ports_up flag if any link down */
+ if (link.link_status == 0) {
+ all_ports_up = 0;
+ break;
+ }
+ }
+ /* after finally printing all link status, get out */
+ if (print_flag == 1)
+ break;
+
+ if (all_ports_up == 0) {
+ printf(".");
+ fflush(stdout);
+ rte_delay_ms(CHECK_INTERVAL);
+ }
+
+ /* set the print_flag if all ports up or timeout */
+ if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
+ print_flag = 1;
+ printf("done\n");
+ }
+ }
+}
+
+int
+main(int argc, char **argv)
+{
+ int ret;
+ uint8_t nb_ports;
+ uint8_t portid;
+ unsigned lcore_id;
+ unsigned rx_lcore_id = 0;
+ struct lcore_queue_conf *qconf = NULL;
+
+ /* init EAL */
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid EAL arguments\n");
+ argc -= ret;
+ argv += ret;
+
+ /* parse application arguments (after the EAL ones) */
+ ret = l2fwd_parse_args(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid L2FWD arguments\n");
+
+ /* create the mbuf pool */
+ l2fwd_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32,
+ 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
+ if (l2fwd_pktmbuf_pool == NULL)
+ rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
+
+ nb_ports = rte_eth_dev_count();
+ if (nb_ports == 0)
+ rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
+
+ if (nb_ports > RTE_MAX_ETHPORTS)
+ nb_ports = RTE_MAX_ETHPORTS;
+
+ /* Initialise each port */
+ for (portid = 0; portid < nb_ports; portid++) {
+ /* skip ports that are not enabled */
+ if ((l2fwd_enabled_port_mask & (1 << portid)) == 0) {
+ printf("Skipping disabled port %u\n", (unsigned) portid);
+ continue;
+ }
+
+ /* init port */
+ printf("Initializing port %u... ", (unsigned) portid);
+ fflush(stdout);
+ ret = rte_eth_dev_configure(portid, 1, 1, &port_conf);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%u\n",
+ ret, (unsigned) portid);
+
+ rte_eth_macaddr_get(portid,&l2fwd_ports_eth_addr[portid]);
+
+ /* init one RX queue */
+ fflush(stdout);
+ ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
+ rte_eth_dev_socket_id(portid),
+ NULL,
+ l2fwd_pktmbuf_pool);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup:err=%d, port=%u\n",
+ ret, (unsigned) portid);
+
+ /* init one TX queue on each port */
+ fflush(stdout);
+ ret = rte_eth_tx_queue_setup(portid, 0, nb_txd,
+ rte_eth_dev_socket_id(portid),
+ NULL);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup:err=%d, port=%u\n",
+ ret, (unsigned) portid);
+
+ /* Start device */
+ ret = rte_eth_dev_start(portid);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "rte_eth_dev_start:err=%d, port=%u\n",
+ ret, (unsigned) portid);
+
+ printf("done: \n");
+
+ rte_eth_promiscuous_enable(portid);
+
+ printf("Port %u, MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n\n",
+ (unsigned) portid,
+ l2fwd_ports_eth_addr[portid].addr_bytes[0],
+ l2fwd_ports_eth_addr[portid].addr_bytes[1],
+ l2fwd_ports_eth_addr[portid].addr_bytes[2],
+ l2fwd_ports_eth_addr[portid].addr_bytes[3],
+ l2fwd_ports_eth_addr[portid].addr_bytes[4],
+ l2fwd_ports_eth_addr[portid].addr_bytes[5]);
+
+ devs[nb_devs] = rte_pktdev_from_ethport(portid, 0, 0);
+ if (devs[nb_devs] != NULL)
+ nb_devs++;
+ }
+
+ if (!nb_devs) {
+ rte_exit(EXIT_FAILURE,
+ "All available ports are disabled. Please set portmask.\n");
+ }
+
+ check_all_ports_link_status(nb_ports, l2fwd_enabled_port_mask);
+
+ /* convert seconds to ticks */
+ timer_period *= rte_get_tsc_hz();
+
+ /* Initialize the port/queue configuration of each logical core */
+ for (portid = 0; portid < nb_devs; portid++) {
+ /* get the lcore_id for this port */
+ while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
+ lcore_queue_conf[rx_lcore_id].n_rx_port ==
+ l2fwd_rx_queue_per_lcore) {
+ rx_lcore_id++;
+ if (rx_lcore_id >= RTE_MAX_LCORE)
+ rte_exit(EXIT_FAILURE, "Not enough cores\n");
+ }
+ qconf = &lcore_queue_conf[rx_lcore_id];
+ qconf->inputs[qconf->n_rx_port] = portid;
+ qconf->outputs[qconf->n_rx_port] = portid ^ 1;
+ qconf->n_rx_port++;
+ }
+ if (nb_devs % 2 == 1) {
+ printf("Notice: odd number of ports in portmask.\n");
+ qconf->outputs[qconf->n_rx_port - 1] = portid;
+ }
+
+ /* launch per-lcore init on every lcore */
+ rte_eal_mp_remote_launch(l2fwd_launch_one_lcore, NULL, CALL_MASTER);
+ RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+ if (rte_eal_wait_lcore(lcore_id) < 0)
+ return -1;
+ }
+
+ return 0;}
--
2.4.2
next prev parent reply other threads:[~2015-06-10 13:07 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-11 16:29 [dpdk-dev] [RFC PATCHv2 0/2] pktdev as wrapper type Bruce Richardson
2015-05-11 16:29 ` [dpdk-dev] [RFC PATCHv2 1/2] Add example pktdev implementation Bruce Richardson
2015-05-11 16:29 ` [dpdk-dev] [RFC PATCHv2 2/2] example app showing pktdevs used in a chain Bruce Richardson
2015-05-19 11:31 ` [dpdk-dev] [RFC PATCHv2 0/2] pktdev as wrapper type Bruce Richardson
2015-05-20 0:19 ` Wiles, Keith
2015-05-20 8:31 ` Thomas Monjalon
2015-05-20 10:05 ` Marc Sune
2015-05-20 10:28 ` Neil Horman
2015-05-20 17:01 ` Marc Sune
2015-05-20 18:47 ` Neil Horman
2015-05-21 12:12 ` Richardson, Bruce
2015-06-10 13:07 ` [dpdk-dev] [RFC-PATCH-v3 0/6] pktdev update Bruce Richardson
2015-06-10 13:07 ` [dpdk-dev] [RFC-PATCH-v3 1/6] kni: add function to query the name of a kni object Bruce Richardson
2015-06-10 13:07 ` [dpdk-dev] [RFC-PATCH-v3 2/6] pktdev: Add pktdev implementation library Bruce Richardson
2015-06-10 13:07 ` [dpdk-dev] [RFC-PATCH-v3 3/6] example app showing pktdevs used in a chain Bruce Richardson
2015-06-10 13:07 ` Bruce Richardson [this message]
2015-06-10 13:07 ` [dpdk-dev] [RFC-PATCH-v3 5/6] pktdev: adding app test Bruce Richardson
2015-06-10 13:07 ` [dpdk-dev] [RFC-PATCH-v3 6/6] test: add pktdev performance tests Bruce Richardson
2015-06-10 13:26 ` [dpdk-dev] [RFC-PATCH-v3 0/6] pktdev update Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433941641-19405-5-git-send-email-bruce.richardson@intel.com \
--to=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).