[dpdk-dev] [PATCH v3 0/9] Support multiple queues in vhost

[Ouyang Changchun <changchun.ouyang@intel.com>]

This patch set supports the multiple queues for each virtio device in vhost.
The vhost-user is used to enable the multiple queues feature, It's not ready for vhost-cuse.
 
The QEMU patch of enabling vhost-use multiple queues has already merged into upstream sub-tree in
QEMU community and it will be put in QEMU 2.4. If using QEMU 2.3, it requires applying the
same patch onto QEMU 2.3 and rebuild the QEMU before running vhost multiple queues:
http://patchwork.ozlabs.org/patch/477461/
 
Basically vhost sample leverages the VMDq+RSS in HW to receive packets and distribute them
into different queue in the pool according to their 5 tuples.
 
On the other hand, the vhost will get the queue pair number based on the communication message with
QEMU.
 
HW queue numbers in pool is strongly recommended to set as identical with the queue number to start
the QMEU guest and identical with the queue number to start with virtio port on guest.
E.g. use '--rxq 4' to set the queue number as 4, it means there are 4 HW queues in each VMDq pool,
and 4 queues in each vhost device/port, every queue in pool maps to one queue in vhost device.
 
=========================================
==================|   |==================|
       vport0     |   |      vport1      |
---  ---  ---  ---|   |---  ---  ---  ---|
q0 | q1 | q2 | q3 |   |q0 | q1 | q2 | q3 |
/\= =/\= =/\= =/\=|   |/\= =/\= =/\= =/\=|
||   ||   ||   ||      ||   ||   ||   ||
||   ||   ||   ||      ||   ||   ||   ||
||= =||= =||= =||=|   =||== ||== ||== ||=|
q0 | q1 | q2 | q3 |   |q0 | q1 | q2 | q3 |
------------------|   |------------------|
     VMDq pool0   |   |    VMDq pool1    |
==================|   |==================|
 
In RX side, it firstly polls each queue of the pool and gets the packets from
it and enqueue them into its corresponding virtqueue in virtio device/port.
In TX side, it dequeue packets from each virtqueue of virtio device/port and send
to either physical port or another virtio device according to its destination
MAC address.

Here is some test guidance.
1. On host, firstly mount hugepage, and insmod uio, igb_uio, bind one nic on igb_uio;
and then run vhost sample, key steps as follows:
sudo mount -t hugetlbfs nodev /mnt/huge
sudo modprobe uio
sudo insmod $RTE_SDK/$RTE_TARGET/kmod/igb_uio.ko
 
$RTE_SDK/tools/dpdk_nic_bind.py --bind igb_uio 0000:08:00.0
sudo $RTE_SDK/examples/vhost/build/vhost-switch -c 0xf0 -n 4 --huge-dir /mnt/huge --socket-mem 1024,0 -- -p 1 --vm2vm 0 --dev-basename usvhost --rxq 2
 
use '--stats 1' to enable the stats dumping on screen for vhost.
 
2. After step 1, on host, modprobe kvm and kvm_intel, and use qemu command line to start one guest:
modprobe kvm
modprobe kvm_intel
sudo mount -t hugetlbfs nodev /dev/hugepages -o pagesize=1G
 
$QEMU_PATH/qemu-system-x86_64 -enable-kvm -m 4096 -object memory-backend-file,id=mem,size=4096M,mem-path=/dev/hugepages,share=on -numa node,memdev=mem -mem-prealloc -smp 10 -cpu core2duo,+sse3,+sse4.1,+sse4.2 -name <vm-name> -drive file=<img-path>/vm.img -chardev socket,id=char0,path=<usvhost-path>/usvhost -netdev type=vhost-user,id=hostnet2,chardev=char0,vhostforce=on,queues=2 -device virtio-net-pci,mq=on,vectors=6,netdev=hostnet2,id=net2,mac=52:54:00:12:34:56,csum=off,gso=off,guest_tso4=off,guest_tso6=off,guest_ecn=off -chardev socket,id=char1,path=<usvhost-path>/usvhost -netdev type=vhost-user,id=hostnet3,chardev=char1,vhostforce=on,queues=2 -device virtio-net-pci,mq=on,vectors=6,netdev=hostnet3,id=net3,mac=52:54:00:12:34:57,csum=off,gso=off,guest_tso4=off,guest_tso6=off,guest_ecn=off
 
3. Log on guest, use testpmd(dpdk based) to test, use multiple virtio queues to rx and tx packets.
modprobe uio
insmod $RTE_SDK/$RTE_TARGET/kmod/igb_uio.ko
echo 1024 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
./tools/dpdk_nic_bind.py --bind igb_uio 00:03.0 00:04.0
 
$RTE_SDK/$RTE_TARGET/app/testpmd -c 1f -n 4 -- --rxq=2 --txq=2 --nb-cores=4 --rx-queue-stats-mapping="(0,0,0),(0,1,1),(1,0,2),(1,1,3)" --tx-queue-stats-mapping="(0,0,0),(0,1,1),(1,0,2),(1,1,3)" -i --disable-hw-vlan --txqflags 0xf00
 
set fwd mac
start tx_first
 
4. Use packet generator to send packets with dest MAC:52 54 00 12 34 57  VLAN tag:1001,
select IPv4 as protocols and continuous incremental IP address.
 
5. Testpmd on guest can display packets received/transmitted in both queues of each virtio port.

Changchun Ouyang (9):
  ixgbe: Support VMDq RSS in non-SRIOV environment
  lib_vhost: Support multiple queues in virtio dev
  lib_vhost: Set memory layout for multiple queues mode
  lib_vhost: Check the virtqueue address's validity
  vhost: Add new command line option: rxq
  vhost: Support multiple queues
  virtio: Resolve for control queue
  vhost: Add per queue stats info
  doc: Update doc for vhost multiple queues

 doc/guides/prog_guide/vhost_lib.rst           |  35 +++
 doc/guides/sample_app_ug/vhost.rst            | 110 +++++++++
 drivers/net/ixgbe/ixgbe_rxtx.c                |  86 +++++--
 drivers/net/virtio/virtio_ethdev.c            |  15 +-
 examples/vhost/main.c                         | 324 +++++++++++++++++---------
 lib/librte_ether/rte_ethdev.c                 |  40 ++++
 lib/librte_vhost/rte_virtio_net.h             |  20 +-
 lib/librte_vhost/vhost-net.h                  |   1 +
 lib/librte_vhost/vhost_cuse/virtio-net-cdev.c |  57 +++--
 lib/librte_vhost/vhost_rxtx.c                 |  70 ++++--
 lib/librte_vhost/vhost_user/vhost-net-user.c  |  15 +-
 lib/librte_vhost/vhost_user/virtio-net-user.c | 135 +++++++----
 lib/librte_vhost/vhost_user/virtio-net-user.h |   2 +
 lib/librte_vhost/virtio-net.c                 | 205 +++++++++++-----
 14 files changed, 824 insertions(+), 291 deletions(-)

-- 
1.8.4.2