DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH v4 00/10] Add a VXLAN sample
@ 2015-06-18  1:03 Jijiang Liu
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 01/10] examples/tep_termination:initialize the " Jijiang Liu
                   ` (9 more replies)
  0 siblings, 10 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-06-18  1:03 UTC (permalink / raw)
  To: dev

This VXLAN sample simulates a VXLAN Tunnel Endpoint (VTEP) termination in DPDK, which is used to demonstrate the offload and filtering capabilities of i40 NIC for VXLAN packet.

And this sample uses the basic virtio devices management function from vHost example, and the US-vHost interface and tunnel filtering mechanism to direct the traffic to/from a specific VM.

In addition, this sample is also designed to show how tunneling protocols can be handled. For the vHost interface, we do not need to support zero copy/inter VM packet transfer, etc. The approaches we took would be of benefit to you because we put a pluggable structure in place so that the application could be easily extended to support a new tunneling protocol.

The software framework is as follows:


       |-------------------|   |-------------------|
       | VM-1(VNI:100)     |   |  VM-2(VNI:200)    |
       | |------| |------| |   | |------| |------| |
       | |vport0| |vport1| |   | |vport0| |vport1| |
       |-|------|-|------|-|   |-|------|-|------|-|      Guests
                      \         /      
         |-------------\-------/--------|
         |     us-vHost interface       |
         |          |-|----|--|         |
         |     decap| | TEP|  | encap   |       DPDK App
         |          |-|----|--|         |
         |            |    |            |
         |------------|----|------------|
                      |    |     
        |-------------|----|---------------|
        |tunnel filter|    | IP/L4 Tx csum |
        |IP/L4 csum   |    | TSO           |
        |packet type  |    |               |               NIC
        |packet recogn|    |               |
        |-------------|----|---------------|
                      |    |   
                      |    |   
                      |    |   
                     /-------\  
                    VXLAN Tunnel  

The sample will support the followings:
1> Tunneling packet recognition.

2> The port of UDP tunneling is configurable

3> Directing incoming traffic to the correct queue based on the tunnel filter type such as inner MAC address and VNI.

 The VNI will be assigned from a static internal table based on the us-vHost device ID. Each device will receive a unique device ID. The inner MAC will be learned by  the first packet transmitted from a device.

4> Decapsulation of Rx VXLAN traffic. This is a software only operation.

5> Encapsulation of Tx VXLAN traffic. This is a software only operation.

6> Tx outer IP, inner IP and L4 checksum offload

7> TSO support for tunneling packet

The limitations:
1. No ARP support.
2. There are some duplicated source codes because I used  the basic virtio device management function from VHOST sample. Considering that the current VHOST sample is quite complicated and huge enough,  I think we shall have a separate sample for tunneling packet processing.
3. Currently, only the i40e NIC is tested in the sample, but other types of NICs will also be supported if they are able to support tunneling packet filter.

v2 changes:
    Fixed an issue about the 'nb_ports' duplication in check_ports_num().
    Removed the inaccurate comment in main.c
    Fixed an issue about TSO offload.

v3 changes:
    Changed some viriable name that don't follow coding rules.
    Removed the limitation of VXLAN packet size due to TSO support.
    Removed useless 'll_root_used' variable in vxlan_setup.c file.
    Removed defination and use of '_htons'.

v4 changes:
    Fixed most of warnings detected by the checkpatch.pl in the main.c file, and 
       there are still some wairnings(line over 80 characters) in the main.c and main.h file.
    Fixed all of warnings detected by the checkpatch.pl in other files.

Jijiang Liu (10):
  create VXLAN sample framework using virtio device management function 
  add basic VXLAN structures 
  addthe pluggable structures
  implement VXLAN packet processing
  add udp port configuration
  add filter type configuration
  add tx checksum offload configuration
  add TSO offload configuration
  add Rx checksum statistics
  add encapsulation and decapsulation flags

 examples/Makefile                      |    1 +
 examples/tep_termination/Makefile      |   55 ++
 examples/tep_termination/main.c        | 1277 ++++++++++++++++++++++++++++++++
 examples/tep_termination/main.h        |  129 ++++
 examples/tep_termination/vxlan.c       |  260 +++++++
 examples/tep_termination/vxlan.h       |   86 +++
 examples/tep_termination/vxlan_setup.c |  457 ++++++++++++
 examples/tep_termination/vxlan_setup.h |   87 +++
 8 files changed, 2352 insertions(+), 0 deletions(-)
 create mode 100644 examples/tep_termination/Makefile
 create mode 100644 examples/tep_termination/main.c
 create mode 100644 examples/tep_termination/main.h
 create mode 100644 examples/tep_termination/vxlan.c
 create mode 100644 examples/tep_termination/vxlan.h
 create mode 100644 examples/tep_termination/vxlan_setup.c
 create mode 100644 examples/tep_termination/vxlan_setup.h

-- 
1.7.7.6

^ permalink raw reply	[flat|nested] 13+ messages in thread

* [dpdk-dev] [PATCH v4 01/10] examples/tep_termination:initialize the VXLAN sample
  2015-06-18  1:03 [dpdk-dev] [PATCH v4 00/10] Add a VXLAN sample Jijiang Liu
@ 2015-06-18  1:03 ` Jijiang Liu
  2015-06-22  7:49   ` Thomas Monjalon
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 02/10] examples/tep_termination:define the basic VXLAN port information Jijiang Liu
                   ` (8 subsequent siblings)
  9 siblings, 1 reply; 13+ messages in thread
From: Jijiang Liu @ 2015-06-18  1:03 UTC (permalink / raw)
  To: dev

This sample uses the basic virtio devices management function from the vHost example, which includes virtio device creation, destroying and maintenance.

Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
 examples/Makefile                 |    1 +
 examples/tep_termination/Makefile |   55 ++
 examples/tep_termination/main.c   | 1130 +++++++++++++++++++++++++++++++++++++
 examples/tep_termination/main.h   |  123 ++++
 4 files changed, 1309 insertions(+), 0 deletions(-)
 create mode 100644 examples/tep_termination/Makefile
 create mode 100644 examples/tep_termination/main.c
 create mode 100644 examples/tep_termination/main.h

diff --git a/examples/Makefile b/examples/Makefile
index e659f6f..d157e15 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -73,5 +73,6 @@ DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen
 DIRS-y += vmdq
 DIRS-y += vmdq_dcb
 DIRS-$(CONFIG_RTE_LIBRTE_POWER) += vm_power_manager
+DIRS-y += tep_termination
 
 include $(RTE_SDK)/mk/rte.extsubdir.mk
diff --git a/examples/tep_termination/Makefile b/examples/tep_termination/Makefile
new file mode 100644
index 0000000..75be3ac
--- /dev/null
+++ b/examples/tep_termination/Makefile
@@ -0,0 +1,55 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+ifneq ($(CONFIG_RTE_EXEC_ENV),"linuxapp")
+$(error This application can only operate in a linuxapp environment, \
+please change the definition of the RTE_TARGET environment variable)
+endif
+
+# binary name
+APP = tep_termination
+
+# all source are stored in SRCS-y
+SRCS-y := main.c
+
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
new file mode 100644
index 0000000..ff56077
--- /dev/null
+++ b/examples/tep_termination/main.c
@@ -0,0 +1,1130 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arpa/inet.h>
+#include <getopt.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/virtio_net.h>
+#include <linux/virtio_ring.h>
+#include <signal.h>
+#include <stdint.h>
+#include <sys/eventfd.h>
+#include <sys/param.h>
+#include <unistd.h>
+
+#include <rte_atomic.h>
+#include <rte_cycles.h>
+#include <rte_ethdev.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+#include <rte_malloc.h>
+#include <rte_virtio_net.h>
+
+#include "main.h"
+
+/* the maximum number of external ports supported */
+#define MAX_SUP_PORTS 1
+
+/**
+ * Calculate the number of buffers needed per port
+ */
+#define NUM_MBUFS_PER_PORT ((MAX_QUEUES * RTE_TEST_RX_DESC_DEFAULT) +\
+				(nb_switching_cores * MAX_PKT_BURST) +\
+				(nb_switching_cores * \
+				RTE_TEST_TX_DESC_DEFAULT) +\
+				(nb_switching_cores * MBUF_CACHE_SIZE))
+
+#define MBUF_CACHE_SIZE 128
+#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+
+#define MAX_PKT_BURST 32	/* Max burst size for RX/TX */
+#define BURST_TX_DRAIN_US 100	/* TX drain every ~100us */
+
+/* Defines how long we wait between retries on RX */
+#define BURST_RX_WAIT_US 15
+
+#define BURST_RX_RETRIES 4	/* Number of retries on RX. */
+
+#define JUMBO_FRAME_MAX_SIZE    0x2600
+
+/* State of virtio device. */
+#define DEVICE_MAC_LEARNING 0
+#define DEVICE_RX	    1
+#define DEVICE_SAFE_REMOVE  2
+
+/* Config_core_flag status definitions. */
+#define REQUEST_DEV_REMOVAL 1
+#define ACK_DEV_REMOVAL     0
+
+/* Configurable number of RX/TX ring descriptors */
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 512
+
+/* Get first 4 bytes in mbuf headroom. */
+#define MBUF_HEADROOM_UINT32(mbuf) (*(uint32_t *)((uint8_t *)(mbuf) \
+		+ sizeof(struct rte_mbuf)))
+
+#define INVALID_PORT_ID 0xFF
+
+/* Size of buffers used for snprintfs. */
+#define MAX_PRINT_BUFF 6072
+
+/* Maximum character device basename size. */
+#define MAX_BASENAME_SZ 20
+
+/* Maximum long option length for option parsing. */
+#define MAX_LONG_OPT_SZ 64
+
+/* Used to compare MAC addresses. */
+#define MAC_ADDR_CMP 0xFFFFFFFFFFFFULL
+
+#define CMD_LINE_OPT_NB_DEVICES "nb-devices"
+#define CMD_LINE_OPT_RX_RETRY "rx-retry"
+#define CMD_LINE_OPT_RX_RETRY_DELAY "rx-retry-delay"
+#define CMD_LINE_OPT_RX_RETRY_NUM "rx-retry-num"
+#define CMD_LINE_OPT_STATS "stats"
+#define CMD_LINE_OPT_DEV_BASENAME "dev-basename"
+
+/* mask of enabled ports */
+static uint32_t enabled_port_mask;
+
+/*Number of switching cores enabled*/
+static uint32_t nb_switching_cores;
+
+/* number of devices/queues to support*/
+uint32_t nb_devices;
+
+/* max ring descriptor, ixgbe, i40e, e1000 all are 4096. */
+#define MAX_RING_DESC 4096
+
+struct vpool {
+	struct rte_mempool *pool;
+	struct rte_ring *ring;
+	uint32_t buf_size;
+} vpool_array[MAX_QUEUES+MAX_QUEUES];
+
+/* Enable stats. */
+uint32_t enable_stats = 0;
+/* Enable retries on RX. */
+static uint32_t enable_retry = 1;
+/* Specify timeout (in useconds) between retries on RX. */
+static uint32_t burst_rx_delay_time = BURST_RX_WAIT_US;
+/* Specify the number of retries on RX. */
+static uint32_t burst_rx_retry_num = BURST_RX_RETRIES;
+
+/* Character device basename. Can be set by user. */
+static char dev_basename[MAX_BASENAME_SZ] = "vhost-net";
+
+static unsigned lcore_ids[RTE_MAX_LCORE];
+uint8_t ports[RTE_MAX_ETHPORTS];
+
+static unsigned nb_ports; /**< The number of ports specified in command line */
+
+/* ethernet addresses of ports */
+struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
+
+/* heads for the main used and free linked lists for the data path. */
+static struct virtio_net_data_ll *ll_root_used;
+static struct virtio_net_data_ll *ll_root_free;
+
+/**
+ * Array of data core structures containing information on
+ * individual core linked lists.
+ */
+static struct lcore_info lcore_info[RTE_MAX_LCORE];
+
+/* Used for queueing bursts of TX packets. */
+struct mbuf_table {
+	unsigned len;
+	unsigned txq_id;
+	struct rte_mbuf *m_table[MAX_PKT_BURST];
+};
+
+/* TX queue for each data core. */
+struct mbuf_table lcore_tx_queue[RTE_MAX_LCORE];
+
+struct device_statistics dev_statistics[MAX_DEVICES];
+
+static inline int
+validate_nb_devices(uint32_t max_nb_devices)
+{
+	if (nb_devices > max_nb_devices) {
+		RTE_LOG(ERR, VHOST_PORT, "invalid number of devices\n");
+		return -1;
+	}
+	return 0;
+}
+
+/**
+ * Set character device basename.
+ */
+static int
+us_vhost_parse_basename(const char *q_arg)
+{
+	/* parse number string */
+	if (strlen(q_arg) >= MAX_BASENAME_SZ)
+		return -1;
+	else
+		snprintf((char *)&dev_basename, MAX_BASENAME_SZ, "%s", q_arg);
+
+	return 0;
+}
+
+/**
+ * Parse the portmask provided at run time.
+ */
+static int
+parse_portmask(const char *portmask)
+{
+	char *end = NULL;
+	unsigned long pm;
+
+	/* parse hexadecimal string */
+	pm = strtoul(portmask, &end, 16);
+	if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
+		return -1;
+
+	if (pm == 0)
+		return -1;
+
+	return pm;
+}
+
+/**
+ * Parse num options at run time.
+ */
+static int
+parse_num_opt(const char *q_arg, uint32_t max_valid_value)
+{
+	char *end = NULL;
+	unsigned long num;
+
+	/* parse unsigned int string */
+	num = strtoul(q_arg, &end, 10);
+	if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
+		return -1;
+
+	if (num > max_valid_value)
+		return -1;
+
+	return num;
+}
+
+/**
+ * Display usage
+ */
+static void
+tep_termination_usage(const char *prgname)
+{
+	RTE_LOG(INFO, VHOST_CONFIG, "%s [EAL options] -- -p PORTMASK\n"
+	"		--nb-devices[1-64]: The number of virtIO device\n"
+	"		-p PORTMASK: Set mask for ports to be used by application\n"
+	"		--rx-retry [0|1]: disable/enable(default) retries on rx."
+	"		 Enable retry if destintation queue is full\n"
+	"		--rx-retry-delay [0-N]: timeout(in usecond) between retries on RX."
+	"		 This makes effect only if retries on rx enabled\n"
+	"		--rx-retry-num [0-N]: the number of retries on rx."
+	"		 This makes effect only if retries on rx enabled\n"
+	"		--stats [0-N]: 0: Disable stats, N: Time in seconds to print stats\n"
+	"		--dev-basename: The basename to be used for the character device.\n",
+	       prgname);
+}
+
+/**
+ * Parse the arguments given in the command line of the application.
+ */
+static int
+tep_termination_parse_args(int argc, char **argv)
+{
+	int opt, ret;
+	int option_index;
+	unsigned i;
+	const char *prgname = argv[0];
+	static struct option long_option[] = {
+		{CMD_LINE_OPT_NB_DEVICES, required_argument, NULL, 0},
+		{CMD_LINE_OPT_RX_RETRY, required_argument, NULL, 0},
+		{CMD_LINE_OPT_RX_RETRY_DELAY, required_argument, NULL, 0},
+		{CMD_LINE_OPT_RX_RETRY_NUM, required_argument, NULL, 0},
+		{CMD_LINE_OPT_STATS, required_argument, NULL, 0},
+		{CMD_LINE_OPT_DEV_BASENAME, required_argument, NULL, 0},
+		{NULL, 0, 0, 0},
+	};
+
+	/* Parse command line */
+	while ((opt = getopt_long(argc, argv, "p:",
+			long_option, &option_index)) != EOF) {
+		switch (opt) {
+		/* Portmask */
+		case 'p':
+			enabled_port_mask = parse_portmask(optarg);
+			if (enabled_port_mask == 0) {
+				RTE_LOG(INFO, VHOST_CONFIG,
+					"Invalid portmask\n");
+				tep_termination_usage(prgname);
+				return -1;
+			}
+			break;
+		case 0:
+			if (!strncmp(long_option[option_index].name,
+				CMD_LINE_OPT_NB_DEVICES,
+				sizeof(CMD_LINE_OPT_NB_DEVICES))) {
+				ret = parse_num_opt(optarg, MAX_DEVICES);
+				if (ret == -1) {
+					RTE_LOG(INFO, VHOST_CONFIG,
+					"Invalid argument for nb-devices [0-%d]\n",
+					MAX_DEVICES);
+					tep_termination_usage(prgname);
+					return -1;
+				} else
+					nb_devices = ret;
+			}
+
+			/* Enable/disable retries on RX. */
+			if (!strncmp(long_option[option_index].name,
+				CMD_LINE_OPT_RX_RETRY,
+				sizeof(CMD_LINE_OPT_RX_RETRY))) {
+				ret = parse_num_opt(optarg, 1);
+				if (ret == -1) {
+					RTE_LOG(INFO, VHOST_CONFIG,
+						"Invalid argument for rx-retry [0|1]\n");
+					tep_termination_usage(prgname);
+					return -1;
+				} else {
+					enable_retry = ret;
+				}
+			}
+
+			/* Specify the retries delay time (in useconds) on RX.*/
+			if (!strncmp(long_option[option_index].name,
+				CMD_LINE_OPT_RX_RETRY_DELAY,
+				sizeof(CMD_LINE_OPT_RX_RETRY_DELAY))) {
+				ret = parse_num_opt(optarg, INT32_MAX);
+				if (ret == -1) {
+					RTE_LOG(INFO, VHOST_CONFIG,
+						"Invalid argument for rx-retry-delay [0-N]\n");
+					tep_termination_usage(prgname);
+					return -1;
+				} else {
+					burst_rx_delay_time = ret;
+				}
+			}
+
+			/* Specify the retries number on RX. */
+			if (!strncmp(long_option[option_index].name,
+				CMD_LINE_OPT_RX_RETRY_NUM,
+				sizeof(CMD_LINE_OPT_RX_RETRY_NUM))) {
+				ret = parse_num_opt(optarg, INT32_MAX);
+				if (ret == -1) {
+					RTE_LOG(INFO, VHOST_CONFIG,
+						"Invalid argument for rx-retry-num [0-N]\n");
+					tep_termination_usage(prgname);
+					return -1;
+				} else {
+					burst_rx_retry_num = ret;
+				}
+			}
+
+			/* Enable/disable stats. */
+			if (!strncmp(long_option[option_index].name,
+				CMD_LINE_OPT_STATS,
+				sizeof(CMD_LINE_OPT_STATS))) {
+				ret = parse_num_opt(optarg, INT32_MAX);
+				if (ret == -1) {
+					RTE_LOG(INFO, VHOST_CONFIG,
+							"Invalid argument for stats [0..N]\n");
+					tep_termination_usage(prgname);
+					return -1;
+				} else {
+					enable_stats = ret;
+				}
+			}
+
+			/* Set character device basename. */
+			if (!strncmp(long_option[option_index].name,
+				CMD_LINE_OPT_DEV_BASENAME,
+				sizeof(CMD_LINE_OPT_DEV_BASENAME))) {
+				if (us_vhost_parse_basename(optarg) == -1) {
+					RTE_LOG(INFO, VHOST_CONFIG,
+						"Invalid argument for character "
+						"device basename (Max %d characters)\n",
+						MAX_BASENAME_SZ);
+					tep_termination_usage(prgname);
+					return -1;
+				}
+			}
+
+			break;
+
+			/* Invalid option - print options. */
+		default:
+			tep_termination_usage(prgname);
+			return -1;
+		}
+	}
+
+	for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
+		if (enabled_port_mask & (1 << i))
+			ports[nb_ports++] = (uint8_t)i;
+	}
+
+	if ((nb_ports ==  0) || (nb_ports > MAX_SUP_PORTS)) {
+		RTE_LOG(INFO, VHOST_PORT, "Current enabled port number is %u,"
+			"but only %u port can be enabled\n", nb_ports,
+			MAX_SUP_PORTS);
+		return -1;
+	}
+
+	return 0;
+}
+
+/**
+ * Update the global var NB_PORTS and array PORTS
+ * according to system ports number and return valid ports number
+ */
+static unsigned
+check_ports_num(unsigned max_nb_ports)
+{
+	unsigned valid_nb_ports = nb_ports;
+	unsigned portid;
+
+	if (nb_ports > max_nb_ports) {
+		RTE_LOG(INFO, VHOST_PORT, "\nSpecified port number(%u) "
+			" exceeds total system port number(%u)\n",
+			nb_ports, max_nb_ports);
+		nb_ports = max_nb_ports;
+	}
+
+	for (portid = 0; portid < nb_ports; portid++) {
+		if (ports[portid] >= max_nb_ports) {
+			RTE_LOG(INFO, VHOST_PORT,
+				"\nSpecified port ID(%u) exceeds max "
+				" system port ID(%u)\n",
+				ports[portid], (max_nb_ports - 1));
+			ports[portid] = INVALID_PORT_ID;
+			valid_nb_ports--;
+		}
+	}
+	return valid_nb_ports;
+}
+
+/**
+ * This function routes the TX packet to the correct interface. This may be a local device
+ * or the physical port.
+ */
+static inline void __attribute__((always_inline))
+virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m)
+{
+	struct mbuf_table *tx_q;
+	struct rte_mbuf **m_table;
+	unsigned len, ret;
+	const uint16_t lcore_id = rte_lcore_id();
+	struct virtio_net *dev = vdev->dev;
+
+	LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is external\n",
+		dev->device_fh);
+
+	/* Add packet to the port tx queue */
+	tx_q = &lcore_tx_queue[lcore_id];
+	len = tx_q->len;
+
+	tx_q->m_table[len] = m;
+	len++;
+	if (enable_stats) {
+		dev_statistics[dev->device_fh].tx_total++;
+		dev_statistics[dev->device_fh].tx++;
+	}
+
+	if (unlikely(len == MAX_PKT_BURST)) {
+		m_table = (struct rte_mbuf **)tx_q->m_table;
+		/* Free any buffers not handled by TX and update
+		 * the port stats.
+		 */
+		if (unlikely(ret < len)) {
+			do {
+				rte_pktmbuf_free(m_table[ret]);
+			} while (++ret < len);
+		}
+
+		len = 0;
+	}
+
+	tx_q->len = len;
+	return;
+}
+
+/**
+ * This function is called by each data core. It handles all
+ * RX/TX registered with the core. For TX the specific lcore
+ * linked list is used. For RX, MAC addresses are compared
+ * with all devices in the main linked list.
+ */
+static int
+switch_worker(__rte_unused void *arg)
+{
+	struct rte_mempool *mbuf_pool = arg;
+	struct virtio_net *dev = NULL;
+	struct vhost_dev *vdev = NULL;
+	struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+	struct virtio_net_data_ll *dev_ll;
+	struct mbuf_table *tx_q;
+	volatile struct lcore_ll_info *lcore_ll;
+	const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1)
+					/ US_PER_S * BURST_TX_DRAIN_US;
+	uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0;
+	unsigned ret, i;
+	const uint16_t lcore_id = rte_lcore_id();
+	const uint16_t num_cores = (uint16_t)rte_lcore_count();
+	uint16_t rx_count = 0;
+	uint16_t tx_count;
+	uint32_t retry = 0;
+
+	RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id);
+	lcore_ll = lcore_info[lcore_id].lcore_ll;
+	prev_tsc = 0;
+
+	tx_q = &lcore_tx_queue[lcore_id];
+	for (i = 0; i < num_cores; i++) {
+		if (lcore_ids[i] == lcore_id) {
+			tx_q->txq_id = i;
+			break;
+		}
+	}
+
+	while (1) {
+		cur_tsc = rte_rdtsc();
+		/*
+		 * TX burst queue drain
+		 */
+		diff_tsc = cur_tsc - prev_tsc;
+		if (unlikely(diff_tsc > drain_tsc)) {
+
+			if (tx_q->len) {
+				LOG_DEBUG(VHOST_DATA, "TX queue drained after "
+					"timeout with burst size %u\n",
+					tx_q->len);
+				if (unlikely(ret < tx_q->len)) {
+					do {
+						rte_pktmbuf_free(tx_q->m_table[ret]);
+					} while (++ret < tx_q->len);
+				}
+
+				tx_q->len = 0;
+			}
+
+			prev_tsc = cur_tsc;
+
+		}
+
+		rte_prefetch0(lcore_ll->ll_root_used);
+
+		/**
+		 * Inform the configuration core that we have exited
+		 * the linked list and that no devices are
+		 * in use if requested.
+		 */
+		if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL)
+			lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
+
+		/*
+		 * Process devices
+		 */
+		dev_ll = lcore_ll->ll_root_used;
+
+		while (dev_ll != NULL) {
+			vdev = dev_ll->vdev;
+			dev = vdev->dev;
+
+			if (unlikely(vdev->remove)) {
+				dev_ll = dev_ll->next;
+				vdev->ready = DEVICE_SAFE_REMOVE;
+				continue;
+			}
+			if (likely(vdev->ready == DEVICE_RX)) {
+				/* Handle guest RX */
+				rx_count = rte_eth_rx_burst(ports[0],
+					vdev->rx_q, pkts_burst, MAX_PKT_BURST);
+
+				if (rx_count) {
+					/*
+					* Retry is enabled and the queue is
+					* full then we wait and retry to
+					* avoid packet loss. Here MAX_PKT_BURST
+					* must be less than virtio queue size
+					*/
+					if (enable_retry && unlikely(rx_count >
+						rte_vring_available_entries(dev, VIRTIO_RXQ))) {
+						for (retry = 0; retry < burst_rx_retry_num;
+							retry++) {
+							rte_delay_us(burst_rx_delay_time);
+							if (rx_count <= rte_vring_available_entries(dev, VIRTIO_RXQ))
+								break;
+						}
+					}
+
+					if (enable_stats) {
+						rte_atomic64_add(
+						&dev_statistics[dev->device_fh].rx_total_atomic,
+						rx_count);
+						rte_atomic64_add(
+						&dev_statistics[dev->device_fh].rx_atomic, ret_count);
+					}
+					while (likely(rx_count)) {
+						rx_count--;
+						rte_pktmbuf_free(pkts_burst[rx_count]);
+					}
+
+				}
+			}
+
+			if (likely(!vdev->remove)) {
+				/* Handle guest TX*/
+				tx_count = rte_vhost_dequeue_burst(dev,
+						VIRTIO_TXQ, mbuf_pool,
+						pkts_burst, MAX_PKT_BURST);
+				/* If this is the first received packet we need to learn the MAC */
+				if (unlikely(vdev->ready == DEVICE_MAC_LEARNING) && tx_count) {
+					if (vdev->remove) {
+						while (tx_count)
+							rte_pktmbuf_free(pkts_burst[--tx_count]);
+					}
+				}
+				while (tx_count)
+					virtio_tx_route(vdev, pkts_burst[--tx_count]);
+			}
+
+			/* move to the next device in the list */
+			dev_ll = dev_ll->next;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * Add an entry to a used linked list. A free entry must first be found
+ * in the free linked list using get_data_ll_free_entry();
+ */
+static void
+add_data_ll_entry(struct virtio_net_data_ll **ll_root_addr,
+	struct virtio_net_data_ll *ll_dev)
+{
+	struct virtio_net_data_ll *ll = *ll_root_addr;
+
+	/* Set next as NULL and use a compiler barrier to avoid reordering. */
+	ll_dev->next = NULL;
+	rte_compiler_barrier();
+
+	/* If ll == NULL then this is the first device. */
+	if (ll) {
+		/* Increment to the tail of the linked list. */
+		while (ll->next != NULL)
+			ll = ll->next;
+
+		ll->next = ll_dev;
+	} else {
+		*ll_root_addr = ll_dev;
+	}
+}
+
+/**
+ * Remove an entry from a used linked list. The entry must then be added to
+ * the free linked list using put_data_ll_free_entry().
+ */
+static void
+rm_data_ll_entry(struct virtio_net_data_ll **ll_root_addr,
+	struct virtio_net_data_ll *ll_dev,
+	struct virtio_net_data_ll *ll_dev_last)
+{
+	struct virtio_net_data_ll *ll = *ll_root_addr;
+
+	if (unlikely((ll == NULL) || (ll_dev == NULL)))
+		return;
+
+	if (ll_dev == ll)
+		*ll_root_addr = ll_dev->next;
+	else
+		if (likely(ll_dev_last != NULL))
+			ll_dev_last->next = ll_dev->next;
+		else
+			RTE_LOG(ERR, VHOST_CONFIG,
+				"Remove entry form ll failed.\n");
+}
+
+/**
+ * Find and return an entry from the free linked list.
+ */
+static struct virtio_net_data_ll *
+get_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr)
+{
+	struct virtio_net_data_ll *ll_free = *ll_root_addr;
+	struct virtio_net_data_ll *ll_dev;
+
+	if (ll_free == NULL)
+		return NULL;
+
+	ll_dev = ll_free;
+	*ll_root_addr = ll_free->next;
+
+	return ll_dev;
+}
+
+/**
+ * Place an entry back on to the free linked list.
+ */
+static void
+put_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr,
+	struct virtio_net_data_ll *ll_dev)
+{
+	struct virtio_net_data_ll *ll_free = *ll_root_addr;
+
+	if (ll_dev == NULL)
+		return;
+
+	ll_dev->next = ll_free;
+	*ll_root_addr = ll_dev;
+}
+
+/**
+ * Creates a linked list of a given size.
+ */
+static struct virtio_net_data_ll *
+alloc_data_ll(uint32_t size)
+{
+	struct virtio_net_data_ll *ll_new;
+	uint32_t i;
+
+	/* Malloc and then chain the linked list. */
+	ll_new = malloc(size * sizeof(struct virtio_net_data_ll));
+	if (ll_new == NULL) {
+		RTE_LOG(ERR, VHOST_CONFIG,
+			"Failed to allocate memory for ll_new.\n");
+		return NULL;
+	}
+
+	for (i = 0; i < size - 1; i++) {
+		ll_new[i].vdev = NULL;
+		ll_new[i].next = &ll_new[i+1];
+	}
+	ll_new[i].next = NULL;
+
+	return ll_new;
+}
+
+/**
+ * Create the main linked list along with each individual cores
+ * linked list. A used and a free list are created to manage entries.
+ */
+static int
+init_data_ll(void)
+{
+	int lcore;
+
+	RTE_LCORE_FOREACH_SLAVE(lcore) {
+		lcore_info[lcore].lcore_ll =
+			malloc(sizeof(struct lcore_ll_info));
+		if (lcore_info[lcore].lcore_ll == NULL) {
+			RTE_LOG(ERR, VHOST_CONFIG,
+				"Failed to allocate memory for lcore_ll.\n");
+			return -1;
+		}
+
+		lcore_info[lcore].lcore_ll->device_num = 0;
+		lcore_info[lcore].lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
+		lcore_info[lcore].lcore_ll->ll_root_used = NULL;
+		if (nb_devices % nb_switching_cores)
+			lcore_info[lcore].lcore_ll->ll_root_free =
+				alloc_data_ll((nb_devices / nb_switching_cores)
+						+ 1);
+		else
+			lcore_info[lcore].lcore_ll->ll_root_free =
+				alloc_data_ll(nb_devices / nb_switching_cores);
+	}
+
+	/* Allocate devices up to a maximum of MAX_DEVICES. */
+	ll_root_free = alloc_data_ll(MIN((nb_devices), MAX_DEVICES));
+
+	return 0;
+}
+
+/**
+ * Remove a device from the specific data core linked list and
+ * from the main linked list. Synchonization occurs through the use
+ * of the lcore dev_removal_flag. Device is made volatile here
+ * to avoid re-ordering of dev->remove=1 which can cause an infinite
+ * loop in the rte_pause loop.
+ */
+static void
+destroy_device(volatile struct virtio_net *dev)
+{
+	struct virtio_net_data_ll *ll_lcore_dev_cur;
+	struct virtio_net_data_ll *ll_main_dev_cur;
+	struct virtio_net_data_ll *ll_lcore_dev_last = NULL;
+	struct virtio_net_data_ll *ll_main_dev_last = NULL;
+	struct vhost_dev *vdev;
+	int lcore;
+
+	dev->flags &= ~VIRTIO_DEV_RUNNING;
+
+	vdev = (struct vhost_dev *)dev->priv;
+
+	/* set the remove flag. */
+	vdev->remove = 1;
+	while (vdev->ready != DEVICE_SAFE_REMOVE)
+		rte_pause();
+
+	/* Search for entry to be removed from lcore ll */
+	ll_lcore_dev_cur = lcore_info[vdev->coreid].lcore_ll->ll_root_used;
+	while (ll_lcore_dev_cur != NULL) {
+		if (ll_lcore_dev_cur->vdev == vdev) {
+			break;
+		} else {
+			ll_lcore_dev_last = ll_lcore_dev_cur;
+			ll_lcore_dev_cur = ll_lcore_dev_cur->next;
+		}
+	}
+
+	if (ll_lcore_dev_cur == NULL) {
+		RTE_LOG(ERR, VHOST_CONFIG,
+			"(%"PRIu64") Failed to find the dev to be destroy.\n",
+			dev->device_fh);
+		return;
+	}
+
+	/* Search for entry to be removed from main ll */
+	ll_main_dev_cur = ll_root_used;
+	ll_main_dev_last = NULL;
+	while (ll_main_dev_cur != NULL) {
+		if (ll_main_dev_cur->vdev == vdev) {
+			break;
+		} else {
+			ll_main_dev_last = ll_main_dev_cur;
+			ll_main_dev_cur = ll_main_dev_cur->next;
+		}
+	}
+
+	/* Remove entries from the lcore and main ll. */
+	rm_data_ll_entry(&lcore_info[vdev->coreid].lcore_ll->ll_root_used,
+			ll_lcore_dev_cur, ll_lcore_dev_last);
+	rm_data_ll_entry(&ll_root_used, ll_main_dev_cur, ll_main_dev_last);
+
+	/* Set the dev_removal_flag on each lcore. */
+	RTE_LCORE_FOREACH_SLAVE(lcore) {
+		lcore_info[lcore].lcore_ll->dev_removal_flag =
+			REQUEST_DEV_REMOVAL;
+	}
+
+	/*
+	 * Once each core has set the dev_removal_flag to
+	 * ACK_DEV_REMOVAL we can be sure that they can no longer access
+	 * the device removed from the linked lists and that the devices
+	 * are no longer in use.
+	 */
+	RTE_LCORE_FOREACH_SLAVE(lcore) {
+		while (lcore_info[lcore].lcore_ll->dev_removal_flag
+			!= ACK_DEV_REMOVAL)
+			rte_pause();
+	}
+
+	/* Add the entries back to the lcore and main free ll.*/
+	put_data_ll_free_entry(&lcore_info[vdev->coreid].lcore_ll->ll_root_free,
+				ll_lcore_dev_cur);
+	put_data_ll_free_entry(&ll_root_free, ll_main_dev_cur);
+
+	/* Decrement number of device on the lcore. */
+	lcore_info[vdev->coreid].lcore_ll->device_num--;
+
+	RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been removed "
+		"from data core\n", dev->device_fh);
+
+	rte_free(vdev);
+
+}
+
+/**
+ * A new device is added to a data core. First the device is added
+ * to the main linked list and the allocated to a specific data core.
+ */
+static int
+new_device(struct virtio_net *dev)
+{
+	struct virtio_net_data_ll *ll_dev;
+	int lcore, core_add = 0;
+	uint32_t device_num_min = nb_devices;
+	struct vhost_dev *vdev;
+
+	vdev = rte_zmalloc("vhost device", sizeof(*vdev), RTE_CACHE_LINE_SIZE);
+	if (vdev == NULL) {
+		RTE_LOG(INFO, VHOST_DATA,
+			"(%"PRIu64") Couldn't allocate memory for vhost dev\n",
+			dev->device_fh);
+		return -1;
+	}
+	vdev->dev = dev;
+	dev->priv = vdev;
+	/* Add device to main ll */
+	ll_dev = get_data_ll_free_entry(&ll_root_free);
+	if (ll_dev == NULL) {
+		RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") No free entry found in"
+			" linked list Device limit of %d devices per core"
+			" has been reached\n", dev->device_fh, nb_devices);
+		if (vdev->regions_hpa)
+			rte_free(vdev->regions_hpa);
+		rte_free(vdev);
+		return -1;
+	}
+	ll_dev->vdev = vdev;
+	add_data_ll_entry(&ll_root_used, ll_dev);
+	vdev->rx_q = dev->device_fh;
+
+	/* reset ready flag */
+	vdev->ready = DEVICE_MAC_LEARNING;
+	vdev->remove = 0;
+
+	/* Find a suitable lcore to add the device. */
+	RTE_LCORE_FOREACH_SLAVE(lcore) {
+		if (lcore_info[lcore].lcore_ll->device_num < device_num_min) {
+			device_num_min = lcore_info[lcore].lcore_ll->device_num;
+			core_add = lcore;
+		}
+	}
+	/* Add device to lcore ll */
+	ll_dev = get_data_ll_free_entry(&lcore_info[core_add].lcore_ll->ll_root_free);
+	if (ll_dev == NULL) {
+		RTE_LOG(INFO, VHOST_DATA,
+			"(%"PRIu64") Failed to add device to data core\n",
+			dev->device_fh);
+		vdev->ready = DEVICE_SAFE_REMOVE;
+		destroy_device(dev);
+		rte_free(vdev->regions_hpa);
+		rte_free(vdev);
+		return -1;
+	}
+	ll_dev->vdev = vdev;
+	vdev->coreid = core_add;
+
+	add_data_ll_entry(&lcore_info[vdev->coreid].lcore_ll->ll_root_used,
+			ll_dev);
+
+	/* Initialize device stats */
+	memset(&dev_statistics[dev->device_fh], 0,
+		sizeof(struct device_statistics));
+
+	/* Disable notifications. */
+	rte_vhost_enable_guest_notification(dev, VIRTIO_RXQ, 0);
+	rte_vhost_enable_guest_notification(dev, VIRTIO_TXQ, 0);
+	lcore_info[vdev->coreid].lcore_ll->device_num++;
+	dev->flags |= VIRTIO_DEV_RUNNING;
+
+	RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been added to data core %d\n",
+		dev->device_fh, vdev->coreid);
+
+	return 0;
+}
+
+/**
+ * These callback allow devices to be added to the data core when configuration
+ * has been fully complete.
+ */
+static const struct virtio_net_device_ops virtio_net_device_ops = {
+	.new_device =  new_device,
+	.destroy_device = destroy_device,
+};
+
+/**
+ * This is a thread will wake up after a period to print stats if the user has
+ * enabled them.
+ */
+static void
+print_stats(void)
+{
+	struct virtio_net_data_ll *dev_ll;
+	uint64_t tx_dropped, rx_dropped;
+	uint64_t tx, tx_total, rx, rx_total;
+	uint32_t device_fh;
+	const char clr[] = { 27, '[', '2', 'J', '\0' };
+	const char top_left[] = { 27, '[', '1', ';', '1', 'H', '\0' };
+
+	while (1) {
+		sleep(enable_stats);
+
+		/* Clear screen and move to top left */
+		printf("%s%s", clr, top_left);
+
+		printf("\nDevice statistics ================================");
+
+		dev_ll = ll_root_used;
+		while (dev_ll != NULL) {
+			device_fh = (uint32_t)dev_ll->vdev->dev->device_fh;
+			tx_total = dev_statistics[device_fh].tx_total;
+			tx = dev_statistics[device_fh].tx;
+			tx_dropped = tx_total - tx;
+
+			rx_total = rte_atomic64_read(
+				&dev_statistics[device_fh].rx_total_atomic);
+			rx = rte_atomic64_read(
+				&dev_statistics[device_fh].rx_atomic);
+			rx_dropped = rx_total - rx;
+
+			printf("\nStatistics for device %"PRIu32" ----------"
+					"\nTX total:		%"PRIu64""
+					"\nTX dropped:		%"PRIu64""
+					"\nTX successful:		%"PRIu64""
+					"\nRX total:		%"PRIu64""
+					"\nRX dropped:		%"PRIu64""
+					"\nRX successful:		%"PRIu64"",
+					device_fh,
+					tx_total,
+					tx_dropped,
+					tx,
+					rx_total,
+					rx_dropped,
+					rx);
+
+			dev_ll = dev_ll->next;
+		}
+		printf("\n================================================\n");
+	}
+}
+
+/**
+ * Main function, does initialisation and calls the per-lcore functions. The CUSE
+ * device is also registered here to handle the IOCTLs.
+ */
+int
+main(int argc, char *argv[])
+{
+	struct rte_mempool *mbuf_pool = NULL;
+	unsigned lcore_id, core_id = 0;
+	unsigned nb_ports, valid_nb_ports;
+	int ret;
+	uint8_t portid;
+	uint16_t queue_id;
+	static pthread_t tid;
+
+	/* init EAL */
+	ret = rte_eal_init(argc, argv);
+	if (ret < 0)
+		rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
+	argc -= ret;
+	argv += ret;
+
+	/* parse app arguments */
+	ret = tep_termination_parse_args(argc, argv);
+	if (ret < 0)
+		rte_exit(EXIT_FAILURE, "Invalid argument\n");
+
+	for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++)
+		if (rte_lcore_is_enabled(lcore_id))
+			lcore_ids[core_id++] = lcore_id;
+
+	/* set the number of swithcing cores available */
+	nb_switching_cores = rte_lcore_count()-1;
+
+	/* Get the number of physical ports. */
+	nb_ports = rte_eth_dev_count();
+	if (nb_ports > RTE_MAX_ETHPORTS)
+		nb_ports = RTE_MAX_ETHPORTS;
+
+	/*
+	 * Update the global var NB_PORTS and global array PORTS
+	 * and get value of var VALID_NB_PORTS according to system ports number
+	 */
+	valid_nb_ports = check_ports_num(nb_ports);
+
+	if ((valid_nb_ports == 0) || (valid_nb_ports > MAX_SUP_PORTS)) {
+		rte_exit(EXIT_FAILURE, "Current enabled port number is %u,"
+			"but only %u port can be enabled\n", nb_ports,
+			MAX_SUP_PORTS);
+	}
+
+	/* Create the mbuf pool. */
+	mbuf_pool = rte_mempool_create(
+			"MBUF_POOL",
+			NUM_MBUFS_PER_PORT
+			* valid_nb_ports,
+			MBUF_SIZE, MBUF_CACHE_SIZE,
+			sizeof(struct rte_pktmbuf_pool_private),
+			rte_pktmbuf_pool_init, NULL,
+			rte_pktmbuf_init, NULL,
+			rte_socket_id(), 0);
+	if (mbuf_pool == NULL)
+		rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
+
+	for (queue_id = 0; queue_id < MAX_QUEUES + 1; queue_id++)
+		vpool_array[queue_id].pool = mbuf_pool;
+
+	/* Set log level. */
+	rte_set_log_level(LOG_LEVEL);
+
+	/* initialize all ports */
+	for (portid = 0; portid < nb_ports; portid++) {
+		/* skip ports that are not enabled */
+		if ((enabled_port_mask & (1 << portid)) == 0) {
+			RTE_LOG(INFO, VHOST_PORT,
+				"Skipping disabled port %d\n", portid);
+			continue;
+		}
+	}
+
+	/* Initialise all linked lists. */
+	if (init_data_ll() == -1)
+		rte_exit(EXIT_FAILURE, "Failed to initialize linked list\n");
+
+	/* Initialize device stats */
+	memset(&dev_statistics, 0, sizeof(dev_statistics));
+
+	/* Enable stats if the user option is set. */
+	if (enable_stats)
+		pthread_create(&tid, NULL, (void *)print_stats, NULL);
+
+	/* Launch all data cores. */
+	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+		rte_eal_remote_launch(switch_worker,
+			mbuf_pool, lcore_id);
+	}
+
+	rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_MRG_RXBUF);
+
+	/* Register CUSE device to handle IOCTLs. */
+	ret = rte_vhost_driver_register((char *)&dev_basename);
+	if (ret != 0)
+		rte_exit(EXIT_FAILURE, "CUSE device setup failure.\n");
+
+	rte_vhost_driver_callback_register(&virtio_net_device_ops);
+
+	/* Start CUSE session. */
+	rte_vhost_driver_session_start();
+
+	return 0;
+}
diff --git a/examples/tep_termination/main.h b/examples/tep_termination/main.h
new file mode 100644
index 0000000..ef843c1
--- /dev/null
+++ b/examples/tep_termination/main.h
@@ -0,0 +1,123 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+#ifdef DEBUG
+#define LOG_LEVEL RTE_LOG_DEBUG
+#define LOG_DEBUG(log_type, fmt, args...) RTE_LOG(DEBUG, log_type, fmt, ##args)
+#else
+#define LOG_LEVEL RTE_LOG_INFO
+#define LOG_DEBUG(log_type, fmt, args...) do {} while (0)
+#endif
+
+/* Macros for printing using RTE_LOG */
+#define RTE_LOGTYPE_VHOST_CONFIG RTE_LOGTYPE_USER1
+#define RTE_LOGTYPE_VHOST_DATA   RTE_LOGTYPE_USER2
+#define RTE_LOGTYPE_VHOST_PORT   RTE_LOGTYPE_USER3
+
+/* State of virtio device. */
+#define DEVICE_MAC_LEARNING	0
+#define DEVICE_RX		1
+#define DEVICE_SAFE_REMOVE	2
+
+#define MAX_QUEUES 512
+
+/* Max burst size for RX/TX */
+#define MAX_PKT_BURST 32
+
+/* Max number of devices. Limited by the application. */
+#define MAX_DEVICES 64
+
+/* Per-device statistics struct */
+struct device_statistics {
+	uint64_t tx_total;
+	rte_atomic64_t rx_total_atomic;
+	uint64_t rx_total;
+	uint64_t tx;
+	rte_atomic64_t rx_atomic;
+} __rte_cache_aligned;
+
+/**
+ * Device linked list structure for data path.
+ */
+struct vhost_dev {
+	/**< Pointer to device created by vhost lib. */
+	struct virtio_net      *dev;
+	/**< Number of memory regions for gpa to hpa translation. */
+	uint32_t nregions_hpa;
+	/**< Memory region information for gpa to hpa translation. */
+	struct virtio_memory_regions_hpa *regions_hpa;
+	/**< Device MAC address (Obtained on first TX packet). */
+	struct ether_addr mac_address;
+	/**< RX queue number. */
+	uint16_t rx_q;
+	/**< Data core that the device is added to. */
+	uint16_t coreid;
+	/**< A device is set as ready if the MAC address has been set. */
+	volatile uint8_t ready;
+	/**< Device is marked for removal from the data core. */
+	volatile uint8_t remove;
+} __rte_cache_aligned;
+
+/**
+ * Structure containing data core specific information.
+ */
+struct lcore_ll_info {
+	/**< Pointer to head in free linked list. */
+	struct virtio_net_data_ll *ll_root_free;
+	/**< Pointer to head of used linked list. */
+	struct virtio_net_data_ll *ll_root_used;
+	/**< Number of devices on lcore. */
+	uint32_t device_num;
+	/**< Flag to synchronize device removal. */
+	volatile uint8_t dev_removal_flag;
+};
+
+struct lcore_info {
+	/**< Pointer to data core specific lcore_ll_info struct */
+	struct lcore_ll_info	*lcore_ll;
+};
+
+struct virtio_net_data_ll {
+	/**< Pointer to device created by configuration core. */
+	struct vhost_dev            *vdev;
+	/**< Pointer to next device in linked list. */
+	struct virtio_net_data_ll   *next;
+};
+
+uint32_t
+virtio_dev_rx(struct virtio_net *dev, struct rte_mbuf **pkts, uint32_t count);
+
+#endif /* _MAIN_H_ */
-- 
1.7.7.6

^ permalink raw reply	[flat|nested] 13+ messages in thread

* [dpdk-dev] [PATCH v4 02/10] examples/tep_termination:define the basic VXLAN port information
  2015-06-18  1:03 [dpdk-dev] [PATCH v4 00/10] Add a VXLAN sample Jijiang Liu
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 01/10] examples/tep_termination:initialize the " Jijiang Liu
@ 2015-06-18  1:03 ` Jijiang Liu
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 03/10] examples/tep_termination:add the pluggable structures for VXLAN packet processing Jijiang Liu
                   ` (7 subsequent siblings)
  9 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-06-18  1:03 UTC (permalink / raw)
  To: dev

Some basic VXLAN definations are added in this file, which includes VXLAN port information and VXLAN device structures.

Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Long <thomas.long@intel.com>
---
 examples/tep_termination/main.c  |    1 +
 examples/tep_termination/vxlan.h |   60 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 61 insertions(+), 0 deletions(-)
 create mode 100644 examples/tep_termination/vxlan.h

diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index ff56077..d589272 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -52,6 +52,7 @@
 #include <rte_virtio_net.h>
 
 #include "main.h"
+#include "vxlan.h"
 
 /* the maximum number of external ports supported */
 #define MAX_SUP_PORTS 1
diff --git a/examples/tep_termination/vxlan.h b/examples/tep_termination/vxlan.h
new file mode 100644
index 0000000..8595eed
--- /dev/null
+++ b/examples/tep_termination/vxlan.h
@@ -0,0 +1,60 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _VXLAN_H_
+#define _VXLAN_H_
+
+#define PORT_MIN	49152
+#define PORT_MAX	65535
+#define PORT_RANGE ((PORT_MAX - PORT_MIN) + 1)
+
+#define VXLAN_N_PORTS  2
+#define VXLAN_HF_VNI 0x08000000
+#define DEFAULT_VXLAN_PORT 4789
+
+struct vxlan_port {
+	uint32_t vport_id;           /**< VirtIO port id */
+	uint32_t peer_ip;            /**< remote VTEP IP address */
+	struct ether_addr peer_mac;  /**< remote VTEP MAC address */
+	struct ether_addr vport_mac; /**< VirtIO port MAC address */
+} __rte_cache_aligned;
+
+struct vxlan_conf {
+	uint16_t dst_port;      /**< VXLAN UDP destination port */
+	uint32_t port_ip;       /**< DPDK port IP address*/
+	uint32_t in_key;        /**< VLAN  ID */
+	uint32_t out_key;       /**< VXLAN VNI */
+	struct vxlan_port port[VXLAN_N_PORTS]; /**< VXLAN configuration */
+} __rte_cache_aligned;
+
+#endif /* _VXLAN_H_ */
-- 
1.7.7.6

^ permalink raw reply	[flat|nested] 13+ messages in thread

* [dpdk-dev] [PATCH v4 03/10] examples/tep_termination:add the pluggable structures for VXLAN packet processing
  2015-06-18  1:03 [dpdk-dev] [PATCH v4 00/10] Add a VXLAN sample Jijiang Liu
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 01/10] examples/tep_termination:initialize the " Jijiang Liu
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 02/10] examples/tep_termination:define the basic VXLAN port information Jijiang Liu
@ 2015-06-18  1:03 ` Jijiang Liu
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 04/10] examples/tep_termination:implement " Jijiang Liu
                   ` (6 subsequent siblings)
  9 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-06-18  1:03 UTC (permalink / raw)
  To: dev

We are trying to create a framework for tunneling packet processing, so some common APIs are added here, which includes 
1> tunnel port configuration

2> tunnel setup

3> tunnel destroying

4> tunneling packet processing for Rx side

5> tunneling packet processing for Tx side

6> tunnel parameter processing


Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Long <thomas.long@intel.com>

---
 examples/tep_termination/main.c        |    1 +
 examples/tep_termination/vxlan_setup.h |   77 ++++++++++++++++++++++++++++++++
 2 files changed, 78 insertions(+), 0 deletions(-)
 create mode 100644 examples/tep_termination/vxlan_setup.h

diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index d589272..5123855 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -53,6 +53,7 @@
 
 #include "main.h"
 #include "vxlan.h"
+#include "vxlan_setup.h"
 
 /* the maximum number of external ports supported */
 #define MAX_SUP_PORTS 1
diff --git a/examples/tep_termination/vxlan_setup.h b/examples/tep_termination/vxlan_setup.h
new file mode 100644
index 0000000..0679876
--- /dev/null
+++ b/examples/tep_termination/vxlan_setup.h
@@ -0,0 +1,77 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef VXLAN_SETUP_H_
+#define VXLAN_SETUP_H_
+
+typedef int (*ol_port_configure_t)(uint8_t port,
+				   struct rte_mempool *mbuf_pool);
+
+typedef int (*ol_tunnel_setup_t)(struct vhost_dev *vdev,
+				 struct rte_mbuf *m);
+
+typedef void (*ol_tunnel_destroy_t)(struct vhost_dev *vdev);
+
+typedef int (*ol_tx_handle_t)(uint8_t port_id, uint16_t queue_id,
+			      struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+
+typedef int (*ol_rx_handle_t)(struct virtio_net *dev, struct rte_mbuf **pkts,
+			      uint32_t count);
+
+typedef int (*ol_param_handle)(struct virtio_net *dev);
+
+struct ol_switch_ops {
+	ol_port_configure_t        port_configure;
+	ol_tunnel_setup_t          tunnel_setup;
+	ol_tunnel_destroy_t        tunnel_destroy;
+	ol_tx_handle_t             tx_handle;
+	ol_rx_handle_t             rx_handle;
+	ol_param_handle            param_handle;
+};
+
+int
+vxlan_port_init(uint8_t port, struct rte_mempool *mbuf_pool);
+
+int
+vxlan_link(struct vhost_dev *vdev, struct rte_mbuf *m);
+
+void
+vxlan_unlink(struct vhost_dev *vdev);
+
+int
+vxlan_tx_pkts(uint8_t port_id, uint16_t queue_id,
+			struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+int
+vxlan_rx_pkts(struct virtio_net *dev, struct rte_mbuf **pkts, uint32_t count);
+
+#endif /* VXLAN_SETUP_H_ */
-- 
1.7.7.6

^ permalink raw reply	[flat|nested] 13+ messages in thread

* [dpdk-dev] [PATCH v4 04/10] examples/tep_termination:implement VXLAN packet processing
  2015-06-18  1:03 [dpdk-dev] [PATCH v4 00/10] Add a VXLAN sample Jijiang Liu
                   ` (2 preceding siblings ...)
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 03/10] examples/tep_termination:add the pluggable structures for VXLAN packet processing Jijiang Liu
@ 2015-06-18  1:03 ` Jijiang Liu
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 05/10] examples/tep_termination:add UDP port configuration for UDP tunneling packet Jijiang Liu
                   ` (5 subsequent siblings)
  9 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-06-18  1:03 UTC (permalink / raw)
  To: dev

To implement the following functions:

1> VXLAN port configuration

2> VXLAN tunnel setup

3> VXLAN tunnel destroying

4> VXLAN packet processing for Rx side

5> VXLAN packet processing for Tx side

Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Long <thomas.long@intel.com>

---
 examples/tep_termination/Makefile      |    2 +-
 examples/tep_termination/main.c        |   42 +++-
 examples/tep_termination/main.h        |    2 +
 examples/tep_termination/vxlan.c       |  172 +++++++++++++++
 examples/tep_termination/vxlan.h       |   25 +++-
 examples/tep_termination/vxlan_setup.c |  357 ++++++++++++++++++++++++++++++++
 examples/tep_termination/vxlan_setup.h |    4 +
 7 files changed, 590 insertions(+), 14 deletions(-)
 create mode 100644 examples/tep_termination/vxlan.c
 create mode 100644 examples/tep_termination/vxlan_setup.c

diff --git a/examples/tep_termination/Makefile b/examples/tep_termination/Makefile
index 75be3ac..2c79bd2 100644
--- a/examples/tep_termination/Makefile
+++ b/examples/tep_termination/Makefile
@@ -47,7 +47,7 @@ endif
 APP = tep_termination
 
 # all source are stored in SRCS-y
-SRCS-y := main.c
+SRCS-y := main.c vxlan_setup.c vxlan.c
 
 CFLAGS += -O3
 CFLAGS += $(WERROR_FLAGS)
diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index 5123855..dccd2b0 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -125,7 +125,7 @@ static uint32_t enabled_port_mask;
 static uint32_t nb_switching_cores;
 
 /* number of devices/queues to support*/
-uint32_t nb_devices;
+uint16_t nb_devices = 2;
 
 /* max ring descriptor, ixgbe, i40e, e1000 all are 4096. */
 #define MAX_RING_DESC 4096
@@ -136,6 +136,16 @@ struct vpool {
 	uint32_t buf_size;
 } vpool_array[MAX_QUEUES+MAX_QUEUES];
 
+/* overlay packet operation */
+struct ol_switch_ops overlay_options = {
+	.port_configure = vxlan_port_init,
+	.tunnel_setup = vxlan_link,
+	.tunnel_destroy = vxlan_unlink,
+	.tx_handle = vxlan_tx_pkts,
+	.rx_handle = vxlan_rx_pkts,
+	.param_handle = NULL,
+};
+
 /* Enable stats. */
 uint32_t enable_stats = 0;
 /* Enable retries on RX. */
@@ -322,9 +332,8 @@ tep_termination_parse_args(int argc, char **argv)
 						"Invalid argument for rx-retry [0|1]\n");
 					tep_termination_usage(prgname);
 					return -1;
-				} else {
+				} else
 					enable_retry = ret;
-				}
 			}
 
 			/* Specify the retries delay time (in useconds) on RX.*/
@@ -337,9 +346,8 @@ tep_termination_parse_args(int argc, char **argv)
 						"Invalid argument for rx-retry-delay [0-N]\n");
 					tep_termination_usage(prgname);
 					return -1;
-				} else {
+				} else
 					burst_rx_delay_time = ret;
-				}
 			}
 
 			/* Specify the retries number on RX. */
@@ -352,9 +360,8 @@ tep_termination_parse_args(int argc, char **argv)
 						"Invalid argument for rx-retry-num [0-N]\n");
 					tep_termination_usage(prgname);
 					return -1;
-				} else {
+				} else
 					burst_rx_retry_num = ret;
-				}
 			}
 
 			/* Enable/disable stats. */
@@ -367,9 +374,8 @@ tep_termination_parse_args(int argc, char **argv)
 							"Invalid argument for stats [0..N]\n");
 					tep_termination_usage(prgname);
 					return -1;
-				} else {
+				} else
 					enable_stats = ret;
-				}
 			}
 
 			/* Set character device basename. */
@@ -469,6 +475,10 @@ virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m)
 
 	if (unlikely(len == MAX_PKT_BURST)) {
 		m_table = (struct rte_mbuf **)tx_q->m_table;
+		ret = overlay_options.tx_handle(ports[0],
+			(uint16_t)tx_q->txq_id, m_table,
+			(uint16_t)tx_q->len);
+
 		/* Free any buffers not handled by TX and update
 		 * the port stats.
 		 */
@@ -535,6 +545,10 @@ switch_worker(__rte_unused void *arg)
 				LOG_DEBUG(VHOST_DATA, "TX queue drained after "
 					"timeout with burst size %u\n",
 					tx_q->len);
+				ret = overlay_options.tx_handle(ports[0],
+					(uint16_t)tx_q->txq_id,
+					(struct rte_mbuf **)tx_q->m_table,
+					(uint16_t)tx_q->len);
 				if (unlikely(ret < tx_q->len)) {
 					do {
 						rte_pktmbuf_free(tx_q->m_table[ret]);
@@ -569,6 +583,7 @@ switch_worker(__rte_unused void *arg)
 
 			if (unlikely(vdev->remove)) {
 				dev_ll = dev_ll->next;
+				overlay_options.tunnel_destroy(vdev);
 				vdev->ready = DEVICE_SAFE_REMOVE;
 				continue;
 			}
@@ -594,6 +609,7 @@ switch_worker(__rte_unused void *arg)
 						}
 					}
 
+					ret_count = overlay_options.rx_handle(dev, pkts_burst, rx_count);
 					if (enable_stats) {
 						rte_atomic64_add(
 						&dev_statistics[dev->device_fh].rx_total_atomic,
@@ -616,7 +632,8 @@ switch_worker(__rte_unused void *arg)
 						pkts_burst, MAX_PKT_BURST);
 				/* If this is the first received packet we need to learn the MAC */
 				if (unlikely(vdev->ready == DEVICE_MAC_LEARNING) && tx_count) {
-					if (vdev->remove) {
+					if (vdev->remove ||
+						(overlay_options.tunnel_setup(vdev, pkts_burst[0]) == -1)) {
 						while (tx_count)
 							rte_pktmbuf_free(pkts_burst[--tx_count]);
 					}
@@ -1069,7 +1086,6 @@ main(int argc, char *argv[])
 			"but only %u port can be enabled\n", nb_ports,
 			MAX_SUP_PORTS);
 	}
-
 	/* Create the mbuf pool. */
 	mbuf_pool = rte_mempool_create(
 			"MBUF_POOL",
@@ -1097,6 +1113,9 @@ main(int argc, char *argv[])
 				"Skipping disabled port %d\n", portid);
 			continue;
 		}
+		if (overlay_options.port_configure(portid, mbuf_pool) != 0)
+			rte_exit(EXIT_FAILURE,
+				"Cannot initialize network ports\n");
 	}
 
 	/* Initialise all linked lists. */
@@ -1115,7 +1134,6 @@ main(int argc, char *argv[])
 		rte_eal_remote_launch(switch_worker,
 			mbuf_pool, lcore_id);
 	}
-
 	rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_MRG_RXBUF);
 
 	/* Register CUSE device to handle IOCTLs. */
diff --git a/examples/tep_termination/main.h b/examples/tep_termination/main.h
index ef843c1..20fa5b3 100644
--- a/examples/tep_termination/main.h
+++ b/examples/tep_termination/main.h
@@ -34,6 +34,8 @@
 #ifndef _MAIN_H_
 #define _MAIN_H_
 
+#include <rte_ether.h>
+
 #ifdef DEBUG
 #define LOG_LEVEL RTE_LOG_DEBUG
 #define LOG_DEBUG(log_type, fmt, args...) RTE_LOG(DEBUG, log_type, fmt, ##args)
diff --git a/examples/tep_termination/vxlan.c b/examples/tep_termination/vxlan.c
new file mode 100644
index 0000000..2f143ac
--- /dev/null
+++ b/examples/tep_termination/vxlan.c
@@ -0,0 +1,172 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <stdint.h>
+#include <rte_mbuf.h>
+#include <rte_hash_crc.h>
+#include <rte_byteorder.h>
+#include <rte_udp.h>
+#include <rte_tcp.h>
+#include <rte_sctp.h>
+
+#include "main.h"
+#include "vxlan.h"
+
+/**
+ * Parse an ethernet header to fill the ethertype, outer_l2_len, outer_l3_len and
+ * ipproto. This function is able to recognize IPv4/IPv6 with one optional vlan
+ * header.
+ */
+static void
+parse_ethernet(struct ether_hdr *eth_hdr, union tunnel_offload_info *info,
+		uint8_t *l4_proto)
+{
+	struct ipv4_hdr *ipv4_hdr;
+	struct ipv6_hdr *ipv6_hdr;
+	uint16_t ethertype;
+
+	info->outer_l2_len = sizeof(struct ether_hdr);
+	ethertype = rte_be_to_cpu_16(eth_hdr->ether_type);
+
+	if (ethertype == ETHER_TYPE_VLAN) {
+		struct vlan_hdr *vlan_hdr = (struct vlan_hdr *)(eth_hdr + 1);
+		info->outer_l2_len  += sizeof(struct vlan_hdr);
+		ethertype = rte_be_to_cpu_16(vlan_hdr->eth_proto);
+	}
+
+	switch (ethertype) {
+	case ETHER_TYPE_IPv4:
+		ipv4_hdr = (struct ipv4_hdr *)
+			((char *)eth_hdr + info->outer_l2_len);
+		info->outer_l3_len = sizeof(struct ipv4_hdr);
+		*l4_proto = ipv4_hdr->next_proto_id;
+		break;
+	case ETHER_TYPE_IPv6:
+		ipv6_hdr = (struct ipv6_hdr *)
+			((char *)eth_hdr + info->outer_l2_len);
+		info->outer_l3_len = sizeof(struct ipv6_hdr);
+		*l4_proto = ipv6_hdr->proto;
+		break;
+	default:
+		info->outer_l3_len = 0;
+		*l4_proto = 0;
+		break;
+	}
+}
+
+int
+decapsulation(struct rte_mbuf *pkt)
+{
+	uint8_t l4_proto = 0;
+	uint16_t outer_header_len;
+	struct udp_hdr *udp_hdr;
+	union tunnel_offload_info info = { .data = 0 };
+	struct ether_hdr *phdr = rte_pktmbuf_mtod(pkt, struct ether_hdr *);
+
+	parse_ethernet(phdr, &info, &l4_proto);
+	if (l4_proto != IPPROTO_UDP)
+		return -1;
+
+	udp_hdr = (struct udp_hdr *)((char *)phdr +
+		info.outer_l2_len + info.outer_l3_len);
+
+	/** check udp destination port, 4789 is the default vxlan port
+	 * (rfc7348) or that the rx offload flag is set (i40e only
+	 * currently)*/
+	if (udp_hdr->dst_port != rte_cpu_to_be_16(DEFAULT_VXLAN_PORT) &&
+			(pkt->ol_flags & (PKT_RX_TUNNEL_IPV4_HDR |
+				PKT_RX_TUNNEL_IPV6_HDR)) == 0)
+		return -1;
+	outer_header_len = info.outer_l2_len + info.outer_l3_len
+		+ sizeof(struct udp_hdr) + sizeof(struct vxlan_hdr);
+
+	rte_pktmbuf_adj(pkt, outer_header_len);
+
+	return 0;
+}
+
+void
+encapsulation(struct rte_mbuf *m, uint8_t queue_id)
+{
+	uint vport_id;
+	uint64_t ol_flags = 0;
+	uint32_t old_len = m->pkt_len, hash;
+	struct ether_hdr *phdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+
+	/*Allocate space for new ethernet, IPv4, UDP and VXLAN headers*/
+	struct ether_hdr *pneth = (struct ether_hdr *) rte_pktmbuf_prepend(m,
+		sizeof(struct ether_hdr) + sizeof(struct ipv4_hdr)
+		+ sizeof(struct udp_hdr) + sizeof(struct vxlan_hdr));
+
+	struct ipv4_hdr *ip = (struct ipv4_hdr *) &pneth[1];
+	struct udp_hdr *udp = (struct udp_hdr *) &ip[1];
+	struct vxlan_hdr *vxlan = (struct vxlan_hdr *) &udp[1];
+
+	/* convert TX queue ID to vport ID */
+	vport_id = queue_id - 1;
+
+	/* replace original Ethernet header with ours */
+	pneth = rte_memcpy(pneth, &app_l2_hdr[vport_id],
+		sizeof(struct ether_hdr));
+
+	/* copy in IP header */
+	ip = rte_memcpy(ip, &app_ip_hdr[vport_id],
+		sizeof(struct ipv4_hdr));
+	ip->total_length = rte_cpu_to_be_16(m->data_len
+				- sizeof(struct ether_hdr));
+
+	/* outer IP checksum */
+	ol_flags |= PKT_TX_OUTER_IP_CKSUM;
+	ip->hdr_checksum = 0;
+
+	m->outer_l2_len = sizeof(struct ether_hdr);
+	m->outer_l3_len = sizeof(struct ipv4_hdr);
+
+	m->ol_flags |= ol_flags;
+
+	/*VXLAN HEADER*/
+	vxlan->vx_flags = rte_cpu_to_be_32(VXLAN_HF_VNI);
+	vxlan->vx_vni = rte_cpu_to_be_32(vxdev.out_key << 8);
+
+	/*UDP HEADER*/
+	udp->dgram_cksum = 0;
+	udp->dgram_len = rte_cpu_to_be_16(old_len
+				+ sizeof(struct udp_hdr)
+				+ sizeof(struct vxlan_hdr));
+
+	udp->dst_port = rte_cpu_to_be_16(vxdev.dst_port);
+	hash = rte_hash_crc(phdr, 2 * ETHER_ADDR_LEN, phdr->ether_type);
+	udp->src_port = rte_cpu_to_be_16((((uint64_t) hash * PORT_RANGE) >> 32)
+					+ PORT_MIN);
+
+	return;
+}
diff --git a/examples/tep_termination/vxlan.h b/examples/tep_termination/vxlan.h
index 8595eed..502bbaa 100644
--- a/examples/tep_termination/vxlan.h
+++ b/examples/tep_termination/vxlan.h
@@ -34,6 +34,9 @@
 #ifndef _VXLAN_H_
 #define _VXLAN_H_
 
+#include <rte_ether.h>
+#include <rte_ip.h>
+
 #define PORT_MIN	49152
 #define PORT_MAX	65535
 #define PORT_RANGE ((PORT_MAX - PORT_MIN) + 1)
@@ -42,6 +45,9 @@
 #define VXLAN_HF_VNI 0x08000000
 #define DEFAULT_VXLAN_PORT 4789
 
+extern struct ipv4_hdr app_ip_hdr[VXLAN_N_PORTS];
+extern struct ether_hdr app_l2_hdr[VXLAN_N_PORTS];
+
 struct vxlan_port {
 	uint32_t vport_id;           /**< VirtIO port id */
 	uint32_t peer_ip;            /**< remote VTEP IP address */
@@ -57,4 +63,21 @@ struct vxlan_conf {
 	struct vxlan_port port[VXLAN_N_PORTS]; /**< VXLAN configuration */
 } __rte_cache_aligned;
 
-#endif /* _MAIN_H_ */
+extern struct vxlan_conf vxdev;
+
+/* structure that caches offload info for the current packet */
+union tunnel_offload_info {
+	uint64_t data;
+	struct {
+		uint64_t l2_len:7; /**< L2 (MAC) Header Length. */
+		uint64_t l3_len:9; /**< L3 (IP) Header Length. */
+		uint64_t l4_len:8; /**< L4 Header Length. */
+		uint64_t outer_l2_len:7; /**< outer L2 Header Length */
+		uint64_t outer_l3_len:16; /**< outer L3 Header Length */
+	};
+} __rte_cache_aligned;
+
+int decapsulation(struct rte_mbuf *pkt);
+void encapsulation(struct rte_mbuf *m, uint8_t queue_id);
+
+#endif /* _VXLAN_H_ */
diff --git a/examples/tep_termination/vxlan_setup.c b/examples/tep_termination/vxlan_setup.c
new file mode 100644
index 0000000..3631e1c
--- /dev/null
+++ b/examples/tep_termination/vxlan_setup.c
@@ -0,0 +1,357 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <getopt.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/virtio_net.h>
+#include <linux/virtio_ring.h>
+#include <sys/param.h>
+#include <unistd.h>
+
+#include <rte_ethdev.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+#include <rte_mbuf.h>
+#include <rte_malloc.h>
+#include <rte_ip.h>
+#include <rte_udp.h>
+#include <rte_tcp.h>
+
+#include "main.h"
+#include "rte_virtio_net.h"
+#include "vxlan.h"
+#include "vxlan_setup.h"
+
+#define IPV4_HEADER_LEN 20
+#define UDP_HEADER_LEN  8
+#define VXLAN_HEADER_LEN 8
+
+#define IP_VERSION 0x40
+#define IP_HDRLEN  0x05 /* default IP header length == five 32-bits words. */
+#define IP_DEFTTL  64   /* from RFC 1340. */
+#define IP_VHL_DEF (IP_VERSION | IP_HDRLEN)
+
+#define IP_DN_FRAGMENT_FLAG 0x0040
+
+/* Used to compare MAC addresses. */
+#define MAC_ADDR_CMP 0xFFFFFFFFFFFFULL
+
+/* Configurable number of RX/TX ring descriptors */
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 512
+
+/* VXLAN device */
+struct vxlan_conf vxdev;
+
+struct ipv4_hdr app_ip_hdr[VXLAN_N_PORTS];
+struct ether_hdr app_l2_hdr[VXLAN_N_PORTS];
+
+/* local VTEP IP address */
+uint8_t vxlan_multicast_ips[2][4] = { {239, 1, 1, 1 }, {239, 1, 2, 1 } };
+
+/* Remote VTEP IP address */
+uint8_t vxlan_overlay_ips[2][4] = { {192, 168, 10, 1}, {192, 168, 30, 1} };
+
+/* Remote VTEP MAC address */
+uint8_t peer_mac[6] = {0x00, 0x11, 0x01, 0x00, 0x00, 0x01};
+
+/* Options for configuring ethernet port */
+static const struct rte_eth_conf port_conf = {
+	.rxmode = {
+		.split_hdr_size = 0,
+		.header_split   = 0, /**< Header Split disabled */
+		.hw_ip_checksum = 0, /**< IP checksum offload disabled */
+		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
+		.jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
+		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
+	},
+	.txmode = {
+		.mq_mode = ETH_MQ_TX_NONE,
+	},
+};
+
+/**
+ * The one or two device(s) that belongs to the same tenant ID can
+ * be assigned in a VM.
+ */
+const uint16_t tenant_id_conf[] = {
+	1000, 1000, 1001, 1001, 1002, 1002, 1003, 1003,
+	1004, 1004, 1005, 1005, 1006, 1006, 1007, 1007,
+	1008, 1008, 1009, 1009, 1010, 1010, 1011, 1011,
+	1012, 1012, 1013, 1013, 1014, 1014, 1015, 1015,
+	1016, 1016, 1017, 1017, 1018, 1018, 1019, 1019,
+	1020, 1020, 1021, 1021, 1022, 1022, 1023, 1023,
+	1024, 1024, 1025, 1025, 1026, 1026, 1027, 1027,
+	1028, 1028, 1029, 1029, 1030, 1030, 1031, 1031,
+};
+
+/**
+ * Initialises a given port using global settings and with the rx buffers
+ * coming from the mbuf_pool passed as parameter
+ */
+int
+vxlan_port_init(uint8_t port, struct rte_mempool *mbuf_pool)
+{
+	int retval;
+	uint16_t q;
+	struct rte_eth_dev_info dev_info;
+	uint16_t rx_rings, tx_rings = (uint16_t)rte_lcore_count();
+	const uint16_t rx_ring_size = RTE_TEST_RX_DESC_DEFAULT;
+	const uint16_t tx_ring_size = RTE_TEST_TX_DESC_DEFAULT;
+	struct rte_eth_rxconf *rxconf;
+	struct rte_eth_txconf *txconf;
+
+	rte_eth_dev_info_get(port, &dev_info);
+
+	if (dev_info.max_rx_queues > MAX_QUEUES) {
+		rte_exit(EXIT_FAILURE,
+			"please define MAX_QUEUES no less than %u in %s\n",
+			dev_info.max_rx_queues, __FILE__);
+	}
+
+	rxconf = &dev_info.default_rxconf;
+	txconf = &dev_info.default_txconf;
+	txconf->txq_flags = 0;
+
+	if (port >= rte_eth_dev_count())
+		return -1;
+
+	rx_rings = nb_devices;
+
+	/* Configure ethernet device. */
+	retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
+	if (retval != 0)
+		return retval;
+
+	/* Setup the queues. */
+	for (q = 0; q < rx_rings; q++) {
+		retval = rte_eth_rx_queue_setup(port, q, rx_ring_size,
+						rte_eth_dev_socket_id(port),
+						rxconf,
+						mbuf_pool);
+		if (retval < 0)
+			return retval;
+	}
+	for (q = 0; q < tx_rings; q++) {
+		retval = rte_eth_tx_queue_setup(port, q, tx_ring_size,
+						rte_eth_dev_socket_id(port),
+						txconf);
+		if (retval < 0)
+			return retval;
+	}
+
+	/* Start the device. */
+	retval  = rte_eth_dev_start(port);
+	if (retval < 0)
+		return retval;
+
+	rte_eth_macaddr_get(port, &ports_eth_addr[port]);
+	RTE_LOG(INFO, PORT, "Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
+			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
+			(unsigned)port,
+			ports_eth_addr[port].addr_bytes[0],
+			ports_eth_addr[port].addr_bytes[1],
+			ports_eth_addr[port].addr_bytes[2],
+			ports_eth_addr[port].addr_bytes[3],
+			ports_eth_addr[port].addr_bytes[4],
+			ports_eth_addr[port].addr_bytes[5]);
+	return 0;
+}
+
+static int
+vxlan_rx_process(struct rte_mbuf *pkt)
+{
+	return  decapsulation(pkt);
+}
+
+static void
+vxlan_tx_process(uint8_t queue_id, struct rte_mbuf *pkt)
+{
+	encapsulation(pkt, queue_id);
+	return;
+}
+
+/*
+ * This function learns the MAC address of the device and set init
+ * L2 header and L3 header info.
+ */
+int
+vxlan_link(struct vhost_dev *vdev, struct rte_mbuf *m)
+{
+	int i;
+	struct ether_hdr *pkt_hdr;
+	struct virtio_net *dev = vdev->dev;
+	uint64_t portid = dev->device_fh;
+	struct ipv4_hdr *ip;
+
+	if (unlikely(portid > VXLAN_N_PORTS)) {
+		RTE_LOG(INFO, VHOST_DATA,
+			"(%"PRIu64") WARNING: Not configuring device,"
+			"as already have %d ports for VXLAN.",
+			dev->device_fh, VXLAN_N_PORTS);
+		return -1;
+	}
+
+	/* Learn MAC address of guest device from packet */
+	pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+	if (is_same_ether_addr(&(pkt_hdr->s_addr), &vdev->mac_address)) {
+		RTE_LOG(INFO, VHOST_DATA,
+			"(%"PRIu64") WARNING: This device is using an existing"
+			" MAC address and has not been registered.\n",
+			dev->device_fh);
+		return -1;
+	}
+
+	for (i = 0; i < ETHER_ADDR_LEN; i++) {
+		vdev->mac_address.addr_bytes[i] =
+			vxdev.port[portid].vport_mac.addr_bytes[i] =
+			pkt_hdr->s_addr.addr_bytes[i];
+		vxdev.port[portid].peer_mac.addr_bytes[i] = peer_mac[i];
+	}
+
+	/* Print out inner MAC and VNI info. */
+	RTE_LOG(INFO, VHOST_DATA,
+		"(%d) MAC_ADDRESS %02x:%02x:%02x:%02x:%02x:%02x and VNI %d registered\n",
+		vdev->rx_q,
+		vdev->mac_address.addr_bytes[0],
+		vdev->mac_address.addr_bytes[1],
+		vdev->mac_address.addr_bytes[2],
+		vdev->mac_address.addr_bytes[3],
+		vdev->mac_address.addr_bytes[4],
+		vdev->mac_address.addr_bytes[5],
+		tenant_id_conf[vdev->rx_q]);
+
+	vxdev.port[portid].vport_id = portid;
+
+	for (i = 0; i < 4; i++) {
+		/* Local VTEP IP */
+		vxdev.port_ip |= vxlan_multicast_ips[portid][i] << (8 * i);
+		/* Remote VTEP IP */
+		vxdev.port[portid].peer_ip |=
+			vxlan_overlay_ips[portid][i] << (8 * i);
+	}
+
+	vxdev.out_key = tenant_id_conf[vdev->rx_q];
+	ether_addr_copy(&vxdev.port[portid].peer_mac,
+			&app_l2_hdr[portid].d_addr);
+	ether_addr_copy(&ports_eth_addr[0],
+			&app_l2_hdr[portid].s_addr);
+	app_l2_hdr[portid].ether_type = rte_cpu_to_be_16(ETHER_TYPE_IPv4);
+
+	ip = &app_ip_hdr[portid];
+	ip->version_ihl = IP_VHL_DEF;
+	ip->type_of_service = 0;
+	ip->total_length = 0;
+	ip->packet_id = 0;
+	ip->fragment_offset = IP_DN_FRAGMENT_FLAG;
+	ip->time_to_live = IP_DEFTTL;
+	ip->next_proto_id = IPPROTO_UDP;
+	ip->hdr_checksum = 0;
+	ip->src_addr = vxdev.port_ip;
+	ip->dst_addr = vxdev.port[portid].peer_ip;
+
+	/* Set device as ready for RX. */
+	vdev->ready = DEVICE_RX;
+
+	return 0;
+}
+
+/**
+ * Removes cloud filter. Ensures that nothing is adding buffers to the RX
+ * queue before disabling RX on the device.
+ */
+void
+vxlan_unlink(struct vhost_dev *vdev)
+{
+	unsigned i = 0, rx_count;
+	struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+
+	if (vdev->ready == DEVICE_RX) {
+		for (i = 0; i < ETHER_ADDR_LEN; i++)
+			vdev->mac_address.addr_bytes[i] = 0;
+
+		/* Clear out the receive buffers */
+		rx_count = rte_eth_rx_burst(ports[0],
+				(uint16_t)vdev->rx_q,
+				pkts_burst, MAX_PKT_BURST);
+
+		while (rx_count) {
+			for (i = 0; i < rx_count; i++)
+				rte_pktmbuf_free(pkts_burst[i]);
+
+			rx_count = rte_eth_rx_burst(ports[0],
+					(uint16_t)vdev->rx_q,
+					pkts_burst, MAX_PKT_BURST);
+		}
+		vdev->ready = DEVICE_MAC_LEARNING;
+	}
+}
+
+/* Transmit packets after encapsulating */
+int
+vxlan_tx_pkts(uint8_t port_id, uint16_t queue_id,
+		struct rte_mbuf **tx_pkts, uint16_t nb_pkts) {
+	int ret = 0;
+	uint16_t i;
+
+	for (i = 0; i < nb_pkts; i++)
+		vxlan_tx_process(queue_id, tx_pkts[i]);
+
+	ret = rte_eth_tx_burst(port_id, queue_id, tx_pkts, nb_pkts);
+
+	return ret;
+}
+
+/* Check for decapsulation and pass packets directly to VIRTIO device */
+int
+vxlan_rx_pkts(struct virtio_net *dev, struct rte_mbuf **pkts_burst,
+		uint32_t rx_count)
+{
+	uint32_t i = 0;
+	uint32_t count = 0;
+	int ret;
+	struct rte_mbuf *pkts_valid[rx_count];
+
+	for (i = 0; i < rx_count; i++) {
+		ret = vxlan_rx_process(pkts_burst[i]);
+		if (unlikely(ret < 0))
+			continue;
+
+		pkts_valid[count] = pkts_burst[i];
+			count++;
+	}
+
+	ret = rte_vhost_enqueue_burst(dev, VIRTIO_RXQ, pkts_valid, count);
+	return ret;
+}
diff --git a/examples/tep_termination/vxlan_setup.h b/examples/tep_termination/vxlan_setup.h
index 0679876..d7e9a29 100644
--- a/examples/tep_termination/vxlan_setup.h
+++ b/examples/tep_termination/vxlan_setup.h
@@ -34,6 +34,10 @@
 #ifndef VXLAN_SETUP_H_
 #define VXLAN_SETUP_H_
 
+extern uint16_t nb_devices;
+extern uint8_t ports[RTE_MAX_ETHPORTS];
+extern struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
+
 typedef int (*ol_port_configure_t)(uint8_t port,
 				   struct rte_mempool *mbuf_pool);
 
-- 
1.7.7.6

^ permalink raw reply	[flat|nested] 13+ messages in thread

* [dpdk-dev] [PATCH v4 05/10] examples/tep_termination:add UDP port configuration for UDP tunneling packet
  2015-06-18  1:03 [dpdk-dev] [PATCH v4 00/10] Add a VXLAN sample Jijiang Liu
                   ` (3 preceding siblings ...)
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 04/10] examples/tep_termination:implement " Jijiang Liu
@ 2015-06-18  1:03 ` Jijiang Liu
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 06/10] examples/tep_termination:add tunnel filter type configuration Jijiang Liu
                   ` (4 subsequent siblings)
  9 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-06-18  1:03 UTC (permalink / raw)
  To: dev

The port number of UDP tunneling packet is configurable, which has 16 entries in total for i40e.

Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
 examples/tep_termination/main.c        |   19 +++++++++++++++++++
 examples/tep_termination/vxlan_setup.c |   13 ++++++++++++-
 examples/tep_termination/vxlan_setup.h |    1 +
 3 files changed, 32 insertions(+), 1 deletions(-)

diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index dccd2b0..0f598ff 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -112,6 +112,7 @@
 #define MAC_ADDR_CMP 0xFFFFFFFFFFFFULL
 
 #define CMD_LINE_OPT_NB_DEVICES "nb-devices"
+#define CMD_LINE_OPT_UDP_PORT "udp-port"
 #define CMD_LINE_OPT_RX_RETRY "rx-retry"
 #define CMD_LINE_OPT_RX_RETRY_DELAY "rx-retry-delay"
 #define CMD_LINE_OPT_RX_RETRY_NUM "rx-retry-num"
@@ -136,6 +137,9 @@ struct vpool {
 	uint32_t buf_size;
 } vpool_array[MAX_QUEUES+MAX_QUEUES];
 
+/* UDP tunneling port */
+uint16_t udp_port;
+
 /* overlay packet operation */
 struct ol_switch_ops overlay_options = {
 	.port_configure = vxlan_port_init,
@@ -260,6 +264,7 @@ static void
 tep_termination_usage(const char *prgname)
 {
 	RTE_LOG(INFO, VHOST_CONFIG, "%s [EAL options] -- -p PORTMASK\n"
+	"               --udp-port: UDP destination port for VXLAN packet\n"
 	"		--nb-devices[1-64]: The number of virtIO device\n"
 	"		-p PORTMASK: Set mask for ports to be used by application\n"
 	"		--rx-retry [0|1]: disable/enable(default) retries on rx."
@@ -285,6 +290,7 @@ tep_termination_parse_args(int argc, char **argv)
 	const char *prgname = argv[0];
 	static struct option long_option[] = {
 		{CMD_LINE_OPT_NB_DEVICES, required_argument, NULL, 0},
+		{CMD_LINE_OPT_UDP_PORT, required_argument, NULL, 0},
 		{CMD_LINE_OPT_RX_RETRY, required_argument, NULL, 0},
 		{CMD_LINE_OPT_RX_RETRY_DELAY, required_argument, NULL, 0},
 		{CMD_LINE_OPT_RX_RETRY_NUM, required_argument, NULL, 0},
@@ -336,6 +342,19 @@ tep_termination_parse_args(int argc, char **argv)
 					enable_retry = ret;
 			}
 
+			if (!strncmp(long_option[option_index].name,
+					CMD_LINE_OPT_UDP_PORT,
+					sizeof(CMD_LINE_OPT_UDP_PORT))) {
+				ret = parse_num_opt(optarg, INT16_MAX);
+				if (ret == -1) {
+					RTE_LOG(INFO, VHOST_CONFIG,
+						"Invalid argument for UDP port [0-N]\n");
+					tep_termination_usage(prgname);
+					return -1;
+				} else
+					udp_port = ret;
+			}
+
 			/* Specify the retries delay time (in useconds) on RX.*/
 			if (!strncmp(long_option[option_index].name,
 				CMD_LINE_OPT_RX_RETRY_DELAY,
diff --git a/examples/tep_termination/vxlan_setup.c b/examples/tep_termination/vxlan_setup.c
index 3631e1c..54d7984 100644
--- a/examples/tep_termination/vxlan_setup.c
+++ b/examples/tep_termination/vxlan_setup.c
@@ -129,8 +129,12 @@ vxlan_port_init(uint8_t port, struct rte_mempool *mbuf_pool)
 	uint16_t rx_rings, tx_rings = (uint16_t)rte_lcore_count();
 	const uint16_t rx_ring_size = RTE_TEST_RX_DESC_DEFAULT;
 	const uint16_t tx_ring_size = RTE_TEST_TX_DESC_DEFAULT;
+	struct rte_eth_udp_tunnel tunnel_udp;
 	struct rte_eth_rxconf *rxconf;
 	struct rte_eth_txconf *txconf;
+	struct vxlan_conf *pconf = &vxdev;
+
+	pconf->dst_port = udp_port;
 
 	rte_eth_dev_info_get(port, &dev_info);
 
@@ -176,6 +180,12 @@ vxlan_port_init(uint8_t port, struct rte_mempool *mbuf_pool)
 	if (retval < 0)
 		return retval;
 
+	/* Configure UDP port for UDP tunneling */
+	tunnel_udp.udp_port = udp_port;
+	tunnel_udp.prot_type = RTE_TUNNEL_TYPE_VXLAN;
+	retval = rte_eth_dev_udp_tunnel_add(port, &tunnel_udp);
+	if (retval < 0)
+		return retval;
 	rte_eth_macaddr_get(port, &ports_eth_addr[port]);
 	RTE_LOG(INFO, PORT, "Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
 			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
@@ -186,13 +196,14 @@ vxlan_port_init(uint8_t port, struct rte_mempool *mbuf_pool)
 			ports_eth_addr[port].addr_bytes[3],
 			ports_eth_addr[port].addr_bytes[4],
 			ports_eth_addr[port].addr_bytes[5]);
+
 	return 0;
 }
 
 static int
 vxlan_rx_process(struct rte_mbuf *pkt)
 {
-	return  decapsulation(pkt);
+	return decapsulation(pkt);
 }
 
 static void
diff --git a/examples/tep_termination/vxlan_setup.h b/examples/tep_termination/vxlan_setup.h
index d7e9a29..d5d1b9d 100644
--- a/examples/tep_termination/vxlan_setup.h
+++ b/examples/tep_termination/vxlan_setup.h
@@ -35,6 +35,7 @@
 #define VXLAN_SETUP_H_
 
 extern uint16_t nb_devices;
+extern uint16_t udp_port;
 extern uint8_t ports[RTE_MAX_ETHPORTS];
 extern struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
 
-- 
1.7.7.6

^ permalink raw reply	[flat|nested] 13+ messages in thread

* [dpdk-dev] [PATCH v4 06/10] examples/tep_termination:add tunnel filter type configuration
  2015-06-18  1:03 [dpdk-dev] [PATCH v4 00/10] Add a VXLAN sample Jijiang Liu
                   ` (4 preceding siblings ...)
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 05/10] examples/tep_termination:add UDP port configuration for UDP tunneling packet Jijiang Liu
@ 2015-06-18  1:03 ` Jijiang Liu
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 07/10] examples/tep_termination:add Tx checksum offload configuration for inner header Jijiang Liu
                   ` (3 subsequent siblings)
  9 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-06-18  1:03 UTC (permalink / raw)
  To: dev

The following filter types are supported for VXLAN:

1> Inner MAC&VLAN and tenent ID

2> Inner MAC and tenent ID, and Outer MAC

3> Inner MAC and tenent ID

Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
 examples/tep_termination/main.c        |   22 ++++++++++
 examples/tep_termination/vxlan_setup.c |   67 +++++++++++++++++++++++++++++++-
 examples/tep_termination/vxlan_setup.h |    1 +
 3 files changed, 89 insertions(+), 1 deletions(-)

diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index 0f598ff..4119d30 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -113,6 +113,7 @@
 
 #define CMD_LINE_OPT_NB_DEVICES "nb-devices"
 #define CMD_LINE_OPT_UDP_PORT "udp-port"
+#define CMD_LINE_OPT_FILTER_TYPE "filter-type"
 #define CMD_LINE_OPT_RX_RETRY "rx-retry"
 #define CMD_LINE_OPT_RX_RETRY_DELAY "rx-retry-delay"
 #define CMD_LINE_OPT_RX_RETRY_NUM "rx-retry-num"
@@ -140,6 +141,9 @@ struct vpool {
 /* UDP tunneling port */
 uint16_t udp_port;
 
+/* RX filter type for tunneling packet */
+uint8_t filter_idx = 1;
+
 /* overlay packet operation */
 struct ol_switch_ops overlay_options = {
 	.port_configure = vxlan_port_init,
@@ -266,6 +270,10 @@ tep_termination_usage(const char *prgname)
 	RTE_LOG(INFO, VHOST_CONFIG, "%s [EAL options] -- -p PORTMASK\n"
 	"               --udp-port: UDP destination port for VXLAN packet\n"
 	"		--nb-devices[1-64]: The number of virtIO device\n"
+	"               --filter-type[1-3]: filter type for tunneling packet\n"
+	"                   1: Inner MAC and tenent ID\n"
+	"                   2: Inner MAC and VLAN, and tenent ID\n"
+	"                   3: Outer MAC, Inner MAC and tenent ID\n"
 	"		-p PORTMASK: Set mask for ports to be used by application\n"
 	"		--rx-retry [0|1]: disable/enable(default) retries on rx."
 	"		 Enable retry if destintation queue is full\n"
@@ -291,6 +299,7 @@ tep_termination_parse_args(int argc, char **argv)
 	static struct option long_option[] = {
 		{CMD_LINE_OPT_NB_DEVICES, required_argument, NULL, 0},
 		{CMD_LINE_OPT_UDP_PORT, required_argument, NULL, 0},
+		{CMD_LINE_OPT_FILTER_TYPE, required_argument, NULL, 0},
 		{CMD_LINE_OPT_RX_RETRY, required_argument, NULL, 0},
 		{CMD_LINE_OPT_RX_RETRY_DELAY, required_argument, NULL, 0},
 		{CMD_LINE_OPT_RX_RETRY_NUM, required_argument, NULL, 0},
@@ -383,6 +392,19 @@ tep_termination_parse_args(int argc, char **argv)
 					burst_rx_retry_num = ret;
 			}
 
+			if (!strncmp(long_option[option_index].name,
+					CMD_LINE_OPT_FILTER_TYPE,
+					sizeof(CMD_LINE_OPT_FILTER_TYPE))) {
+				ret = parse_num_opt(optarg, 3);
+				if ((ret == -1) || (ret == 0)) {
+					RTE_LOG(INFO, VHOST_CONFIG,
+						"Invalid argument for filter type [1-3]\n");
+					tep_termination_usage(prgname);
+					return -1;
+				} else
+					filter_idx = ret - 1;
+			}
+
 			/* Enable/disable stats. */
 			if (!strncmp(long_option[option_index].name,
 				CMD_LINE_OPT_STATS,
diff --git a/examples/tep_termination/vxlan_setup.c b/examples/tep_termination/vxlan_setup.c
index 54d7984..942fc06 100644
--- a/examples/tep_termination/vxlan_setup.c
+++ b/examples/tep_termination/vxlan_setup.c
@@ -71,6 +71,9 @@
 #define RTE_TEST_RX_DESC_DEFAULT 1024
 #define RTE_TEST_TX_DESC_DEFAULT 512
 
+/* Default inner VLAN ID */
+#define INNER_VLAN_ID 100
+
 /* VXLAN device */
 struct vxlan_conf vxdev;
 
@@ -86,6 +89,11 @@ uint8_t vxlan_overlay_ips[2][4] = { {192, 168, 10, 1}, {192, 168, 30, 1} };
 /* Remote VTEP MAC address */
 uint8_t peer_mac[6] = {0x00, 0x11, 0x01, 0x00, 0x00, 0x01};
 
+/* VXLAN RX filter type */
+uint8_t tep_filter_type[] = {RTE_TUNNEL_FILTER_IMAC_TENID,
+			RTE_TUNNEL_FILTER_IMAC_IVLAN_TENID,
+			RTE_TUNNEL_FILTER_OMAC_TENID_IMAC,};
+
 /* Options for configuring ethernet port */
 static const struct rte_eth_conf port_conf = {
 	.rxmode = {
@@ -220,12 +228,14 @@ vxlan_tx_process(uint8_t queue_id, struct rte_mbuf *pkt)
 int
 vxlan_link(struct vhost_dev *vdev, struct rte_mbuf *m)
 {
-	int i;
+	int i, ret;
 	struct ether_hdr *pkt_hdr;
 	struct virtio_net *dev = vdev->dev;
 	uint64_t portid = dev->device_fh;
 	struct ipv4_hdr *ip;
 
+	struct rte_eth_tunnel_filter_conf tunnel_filter_conf;
+
 	if (unlikely(portid > VXLAN_N_PORTS)) {
 		RTE_LOG(INFO, VHOST_DATA,
 			"(%"PRIu64") WARNING: Not configuring device,"
@@ -251,6 +261,34 @@ vxlan_link(struct vhost_dev *vdev, struct rte_mbuf *m)
 		vxdev.port[portid].peer_mac.addr_bytes[i] = peer_mac[i];
 	}
 
+	memset(&tunnel_filter_conf, 0,
+		sizeof(struct rte_eth_tunnel_filter_conf));
+
+	tunnel_filter_conf.outer_mac = &ports_eth_addr[0];
+	tunnel_filter_conf.filter_type = tep_filter_type[filter_idx];
+
+	/* inner MAC */
+	tunnel_filter_conf.inner_mac = &vdev->mac_address;
+
+	tunnel_filter_conf.queue_id = vdev->rx_q;
+	tunnel_filter_conf.tenant_id = tenant_id_conf[vdev->rx_q];
+
+	if (tep_filter_type[filter_idx] == RTE_TUNNEL_FILTER_IMAC_IVLAN_TENID)
+		tunnel_filter_conf.inner_vlan = INNER_VLAN_ID;
+
+	tunnel_filter_conf.tunnel_type = RTE_TUNNEL_TYPE_VXLAN;
+
+	ret = rte_eth_dev_filter_ctrl(ports[0],
+		RTE_ETH_FILTER_TUNNEL,
+		RTE_ETH_FILTER_ADD,
+		&tunnel_filter_conf);
+	if (ret) {
+		RTE_LOG(ERR, VHOST_DATA,
+			"%d Failed to add device MAC address to cloud filter\n",
+		vdev->rx_q);
+		return -1;
+	}
+
 	/* Print out inner MAC and VNI info. */
 	RTE_LOG(INFO, VHOST_DATA,
 		"(%d) MAC_ADDRESS %02x:%02x:%02x:%02x:%02x:%02x and VNI %d registered\n",
@@ -306,9 +344,36 @@ void
 vxlan_unlink(struct vhost_dev *vdev)
 {
 	unsigned i = 0, rx_count;
+	int ret;
 	struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+	struct rte_eth_tunnel_filter_conf tunnel_filter_conf;
 
 	if (vdev->ready == DEVICE_RX) {
+		memset(&tunnel_filter_conf, 0,
+			sizeof(struct rte_eth_tunnel_filter_conf));
+
+		tunnel_filter_conf.outer_mac = &ports_eth_addr[0];
+		tunnel_filter_conf.inner_mac = &vdev->mac_address;
+		tunnel_filter_conf.tenant_id = tenant_id_conf[vdev->rx_q];
+		tunnel_filter_conf.filter_type = tep_filter_type[filter_idx];
+
+		if (tep_filter_type[filter_idx] ==
+			RTE_TUNNEL_FILTER_IMAC_IVLAN_TENID)
+			tunnel_filter_conf.inner_vlan = INNER_VLAN_ID;
+
+		tunnel_filter_conf.queue_id = vdev->rx_q;
+		tunnel_filter_conf.tunnel_type = RTE_TUNNEL_TYPE_VXLAN;
+
+		ret = rte_eth_dev_filter_ctrl(ports[0],
+				RTE_ETH_FILTER_TUNNEL,
+				RTE_ETH_FILTER_DELETE,
+				&tunnel_filter_conf);
+		if (ret) {
+			RTE_LOG(ERR, VHOST_DATA,
+				"%d Failed to add device MAC address to cloud filter\n",
+				vdev->rx_q);
+			return;
+		}
 		for (i = 0; i < ETHER_ADDR_LEN; i++)
 			vdev->mac_address.addr_bytes[i] = 0;
 
diff --git a/examples/tep_termination/vxlan_setup.h b/examples/tep_termination/vxlan_setup.h
index d5d1b9d..96442e2 100644
--- a/examples/tep_termination/vxlan_setup.h
+++ b/examples/tep_termination/vxlan_setup.h
@@ -36,6 +36,7 @@
 
 extern uint16_t nb_devices;
 extern uint16_t udp_port;
+extern uint8_t filter_idx;
 extern uint8_t ports[RTE_MAX_ETHPORTS];
 extern struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
 
-- 
1.7.7.6

^ permalink raw reply	[flat|nested] 13+ messages in thread

* [dpdk-dev] [PATCH v4 07/10] examples/tep_termination:add Tx checksum offload configuration for inner header
  2015-06-18  1:03 [dpdk-dev] [PATCH v4 00/10] Add a VXLAN sample Jijiang Liu
                   ` (5 preceding siblings ...)
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 06/10] examples/tep_termination:add tunnel filter type configuration Jijiang Liu
@ 2015-06-18  1:03 ` Jijiang Liu
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 08/10] examples/tep_termination:add TSO offload configuration Jijiang Liu
                   ` (2 subsequent siblings)
  9 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-06-18  1:03 UTC (permalink / raw)
  To: dev

For UDP tunneling packet, the inner Tx checksum offload means inner IPv4 and inner L4(TCP/UDP/SCTP).

Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
 examples/tep_termination/main.c  |   19 +++++++++
 examples/tep_termination/vxlan.c |   81 ++++++++++++++++++++++++++++++++++++++
 examples/tep_termination/vxlan.h |    1 +
 3 files changed, 101 insertions(+), 0 deletions(-)

diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index 4119d30..2c3bc9d 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -113,6 +113,7 @@
 
 #define CMD_LINE_OPT_NB_DEVICES "nb-devices"
 #define CMD_LINE_OPT_UDP_PORT "udp-port"
+#define CMD_LINE_OPT_TX_CHECKSUM "tx-checksum"
 #define CMD_LINE_OPT_FILTER_TYPE "filter-type"
 #define CMD_LINE_OPT_RX_RETRY "rx-retry"
 #define CMD_LINE_OPT_RX_RETRY_DELAY "rx-retry-delay"
@@ -141,6 +142,9 @@ struct vpool {
 /* UDP tunneling port */
 uint16_t udp_port;
 
+/* enable/disable inner TX checksum */
+uint8_t tx_checksum = 0;
+
 /* RX filter type for tunneling packet */
 uint8_t filter_idx = 1;
 
@@ -270,6 +274,7 @@ tep_termination_usage(const char *prgname)
 	RTE_LOG(INFO, VHOST_CONFIG, "%s [EAL options] -- -p PORTMASK\n"
 	"               --udp-port: UDP destination port for VXLAN packet\n"
 	"		--nb-devices[1-64]: The number of virtIO device\n"
+	"               --tx-checksum [0|1]: inner Tx checksum offload\n"
 	"               --filter-type[1-3]: filter type for tunneling packet\n"
 	"                   1: Inner MAC and tenent ID\n"
 	"                   2: Inner MAC and VLAN, and tenent ID\n"
@@ -299,6 +304,7 @@ tep_termination_parse_args(int argc, char **argv)
 	static struct option long_option[] = {
 		{CMD_LINE_OPT_NB_DEVICES, required_argument, NULL, 0},
 		{CMD_LINE_OPT_UDP_PORT, required_argument, NULL, 0},
+		{CMD_LINE_OPT_TX_CHECKSUM, required_argument, NULL, 0},
 		{CMD_LINE_OPT_FILTER_TYPE, required_argument, NULL, 0},
 		{CMD_LINE_OPT_RX_RETRY, required_argument, NULL, 0},
 		{CMD_LINE_OPT_RX_RETRY_DELAY, required_argument, NULL, 0},
@@ -393,6 +399,19 @@ tep_termination_parse_args(int argc, char **argv)
 			}
 
 			if (!strncmp(long_option[option_index].name,
+				CMD_LINE_OPT_TX_CHECKSUM,
+				sizeof(CMD_LINE_OPT_TX_CHECKSUM))) {
+				ret = parse_num_opt(optarg, 1);
+				if (ret == -1) {
+					RTE_LOG(INFO, VHOST_CONFIG,
+						"Invalid argument for tx-checksum [0|1]\n");
+					tep_termination_usage(prgname);
+					return -1;
+				} else
+					tx_checksum = ret;
+			}
+
+			if (!strncmp(long_option[option_index].name,
 					CMD_LINE_OPT_FILTER_TYPE,
 					sizeof(CMD_LINE_OPT_FILTER_TYPE))) {
 				ret = parse_num_opt(optarg, 3);
diff --git a/examples/tep_termination/vxlan.c b/examples/tep_termination/vxlan.c
index 2f143ac..34851d8 100644
--- a/examples/tep_termination/vxlan.c
+++ b/examples/tep_termination/vxlan.c
@@ -41,6 +41,15 @@
 #include "main.h"
 #include "vxlan.h"
 
+static uint16_t
+get_psd_sum(void *l3_hdr, uint16_t ethertype, uint64_t ol_flags)
+{
+	if (ethertype == ETHER_TYPE_IPv4)
+		return rte_ipv4_phdr_cksum(l3_hdr, ol_flags);
+	else /* assume ethertype == ETHER_TYPE_IPv6 */
+		return rte_ipv6_phdr_cksum(l3_hdr, ol_flags);
+}
+
 /**
  * Parse an ethernet header to fill the ethertype, outer_l2_len, outer_l3_len and
  * ipproto. This function is able to recognize IPv4/IPv6 with one optional vlan
@@ -83,6 +92,68 @@ parse_ethernet(struct ether_hdr *eth_hdr, union tunnel_offload_info *info,
 	}
 }
 
+/**
+ * Calculate the checksum of a packet in hardware
+ */
+static uint64_t
+process_inner_cksums(struct ether_hdr *eth_hdr, union tunnel_offload_info *info)
+{
+	void *l3_hdr = NULL;
+	uint8_t l4_proto;
+	uint16_t ethertype;
+	struct ipv4_hdr *ipv4_hdr;
+	struct ipv6_hdr *ipv6_hdr;
+	struct udp_hdr *udp_hdr;
+	struct tcp_hdr *tcp_hdr;
+	struct sctp_hdr *sctp_hdr;
+	uint64_t ol_flags = 0;
+
+	info->l2_len = sizeof(struct ether_hdr);
+	ethertype = rte_be_to_cpu_16(eth_hdr->ether_type);
+
+	if (ethertype == ETHER_TYPE_VLAN) {
+		struct vlan_hdr *vlan_hdr = (struct vlan_hdr *)(eth_hdr + 1);
+		info->l2_len  += sizeof(struct vlan_hdr);
+		ethertype = rte_be_to_cpu_16(vlan_hdr->eth_proto);
+	}
+
+	l3_hdr = (char *)eth_hdr + info->l2_len;
+
+	if (ethertype == ETHER_TYPE_IPv4) {
+		ipv4_hdr = (struct ipv4_hdr *)l3_hdr;
+		ipv4_hdr->hdr_checksum = 0;
+		ol_flags |= PKT_TX_IPV4;
+		ol_flags |= PKT_TX_IP_CKSUM;
+		info->l3_len = sizeof(struct ipv4_hdr);
+		l4_proto = ipv4_hdr->next_proto_id;
+	} else if (ethertype == ETHER_TYPE_IPv6) {
+		ipv6_hdr = (struct ipv6_hdr *)l3_hdr;
+		info->l3_len = sizeof(struct ipv6_hdr);
+		l4_proto = ipv6_hdr->proto;
+		ol_flags |= PKT_TX_IPV6;
+	} else
+		return 0; /* packet type not supported, nothing to do */
+
+	if (l4_proto == IPPROTO_UDP) {
+		udp_hdr = (struct udp_hdr *)((char *)l3_hdr + info->l3_len);
+		ol_flags |= PKT_TX_UDP_CKSUM;
+		udp_hdr->dgram_cksum = get_psd_sum(l3_hdr,
+				ethertype, ol_flags);
+	} else if (l4_proto == IPPROTO_TCP) {
+		tcp_hdr = (struct tcp_hdr *)((char *)l3_hdr + info->l3_len);
+		ol_flags |= PKT_TX_TCP_CKSUM;
+		tcp_hdr->cksum = get_psd_sum(l3_hdr, ethertype,
+				ol_flags);
+
+	} else if (l4_proto == IPPROTO_SCTP) {
+		sctp_hdr = (struct sctp_hdr *)((char *)l3_hdr + info->l3_len);
+		sctp_hdr->cksum = 0;
+		ol_flags |= PKT_TX_SCTP_CKSUM;
+	}
+
+	return ol_flags;
+}
+
 int
 decapsulation(struct rte_mbuf *pkt)
 {
@@ -93,6 +164,7 @@ decapsulation(struct rte_mbuf *pkt)
 	struct ether_hdr *phdr = rte_pktmbuf_mtod(pkt, struct ether_hdr *);
 
 	parse_ethernet(phdr, &info, &l4_proto);
+
 	if (l4_proto != IPPROTO_UDP)
 		return -1;
 
@@ -120,6 +192,7 @@ encapsulation(struct rte_mbuf *m, uint8_t queue_id)
 	uint vport_id;
 	uint64_t ol_flags = 0;
 	uint32_t old_len = m->pkt_len, hash;
+	union tunnel_offload_info tx_offload = { .data = 0 };
 	struct ether_hdr *phdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
 
 	/*Allocate space for new ethernet, IPv4, UDP and VXLAN headers*/
@@ -148,6 +221,14 @@ encapsulation(struct rte_mbuf *m, uint8_t queue_id)
 	ol_flags |= PKT_TX_OUTER_IP_CKSUM;
 	ip->hdr_checksum = 0;
 
+	/* inner IP checksum offload */
+	if (tx_checksum) {
+		ol_flags |= process_inner_cksums(phdr, &tx_offload);
+		m->l2_len = tx_offload.l2_len;
+		m->l3_len = tx_offload.l3_len;
+		m->l2_len += ETHER_VXLAN_HLEN;
+	}
+
 	m->outer_l2_len = sizeof(struct ether_hdr);
 	m->outer_l3_len = sizeof(struct ipv4_hdr);
 
diff --git a/examples/tep_termination/vxlan.h b/examples/tep_termination/vxlan.h
index 502bbaa..090eb48 100644
--- a/examples/tep_termination/vxlan.h
+++ b/examples/tep_termination/vxlan.h
@@ -47,6 +47,7 @@
 
 extern struct ipv4_hdr app_ip_hdr[VXLAN_N_PORTS];
 extern struct ether_hdr app_l2_hdr[VXLAN_N_PORTS];
+extern uint8_t tx_checksum;
 
 struct vxlan_port {
 	uint32_t vport_id;           /**< VirtIO port id */
-- 
1.7.7.6

^ permalink raw reply	[flat|nested] 13+ messages in thread

* [dpdk-dev] [PATCH v4 08/10] examples/tep_termination:add TSO offload configuration
  2015-06-18  1:03 [dpdk-dev] [PATCH v4 00/10] Add a VXLAN sample Jijiang Liu
                   ` (6 preceding siblings ...)
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 07/10] examples/tep_termination:add Tx checksum offload configuration for inner header Jijiang Liu
@ 2015-06-18  1:03 ` Jijiang Liu
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 09/10] examples/tep_termination:add bad Rx checksum statistics of inner IP and L4 Jijiang Liu
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 10/10] examples/tep_termination:add the configuration for encapsulation and the decapsulation Jijiang Liu
  9 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-06-18  1:03 UTC (permalink / raw)
  To: dev

If the 'tso-segsz' is not 0, it means TSO offload is enabled.

Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
 examples/tep_termination/main.c        |   19 +++++++++++++++++++
 examples/tep_termination/vxlan.c       |    7 +++++++
 examples/tep_termination/vxlan.h       |    2 ++
 examples/tep_termination/vxlan_setup.c |    7 +++++++
 4 files changed, 35 insertions(+), 0 deletions(-)

diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index 2c3bc9d..7b8246c 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -114,6 +114,7 @@
 #define CMD_LINE_OPT_NB_DEVICES "nb-devices"
 #define CMD_LINE_OPT_UDP_PORT "udp-port"
 #define CMD_LINE_OPT_TX_CHECKSUM "tx-checksum"
+#define CMD_LINE_OPT_TSO_SEGSZ "tso-segsz"
 #define CMD_LINE_OPT_FILTER_TYPE "filter-type"
 #define CMD_LINE_OPT_RX_RETRY "rx-retry"
 #define CMD_LINE_OPT_RX_RETRY_DELAY "rx-retry-delay"
@@ -145,6 +146,9 @@ uint16_t udp_port;
 /* enable/disable inner TX checksum */
 uint8_t tx_checksum;
 
+/* TCP segment size */
+uint16_t tso_segsz = 0;
+
 /* RX filter type for tunneling packet */
 uint8_t filter_idx = 1;
 
@@ -275,6 +279,7 @@ tep_termination_usage(const char *prgname)
 	"               --udp-port: UDP destination port for VXLAN packet\n"
 	"		--nb-devices[1-64]: The number of virtIO device\n"
 	"               --tx-checksum [0|1]: inner Tx checksum offload\n"
+	"               --tso-segsz [0-N]: TCP segment size\n"
 	"               --filter-type[1-3]: filter type for tunneling packet\n"
 	"                   1: Inner MAC and tenent ID\n"
 	"                   2: Inner MAC and VLAN, and tenent ID\n"
@@ -305,6 +310,7 @@ tep_termination_parse_args(int argc, char **argv)
 		{CMD_LINE_OPT_NB_DEVICES, required_argument, NULL, 0},
 		{CMD_LINE_OPT_UDP_PORT, required_argument, NULL, 0},
 		{CMD_LINE_OPT_TX_CHECKSUM, required_argument, NULL, 0},
+		{CMD_LINE_OPT_TSO_SEGSZ, required_argument, NULL, 0},
 		{CMD_LINE_OPT_FILTER_TYPE, required_argument, NULL, 0},
 		{CMD_LINE_OPT_RX_RETRY, required_argument, NULL, 0},
 		{CMD_LINE_OPT_RX_RETRY_DELAY, required_argument, NULL, 0},
@@ -358,6 +364,19 @@ tep_termination_parse_args(int argc, char **argv)
 			}
 
 			if (!strncmp(long_option[option_index].name,
+				CMD_LINE_OPT_TSO_SEGSZ,
+				sizeof(CMD_LINE_OPT_TSO_SEGSZ))) {
+				ret = parse_num_opt(optarg, INT16_MAX);
+				if (ret == -1) {
+					RTE_LOG(INFO, VHOST_CONFIG,
+						"Invalid argument for TCP segment size [0-N]\n");
+					tep_termination_usage(prgname);
+					return -1;
+				} else
+					tso_segsz = ret;
+			}
+
+			if (!strncmp(long_option[option_index].name,
 					CMD_LINE_OPT_UDP_PORT,
 					sizeof(CMD_LINE_OPT_UDP_PORT))) {
 				ret = parse_num_opt(optarg, INT16_MAX);
diff --git a/examples/tep_termination/vxlan.c b/examples/tep_termination/vxlan.c
index 34851d8..b2a2f53 100644
--- a/examples/tep_termination/vxlan.c
+++ b/examples/tep_termination/vxlan.c
@@ -144,6 +144,11 @@ process_inner_cksums(struct ether_hdr *eth_hdr, union tunnel_offload_info *info)
 		ol_flags |= PKT_TX_TCP_CKSUM;
 		tcp_hdr->cksum = get_psd_sum(l3_hdr, ethertype,
 				ol_flags);
+		if (tso_segsz != 0) {
+			ol_flags |= PKT_TX_TCP_SEG;
+			info->tso_segsz = tso_segsz;
+			info->l4_len = sizeof(struct tcp_hdr);
+		}
 
 	} else if (l4_proto == IPPROTO_SCTP) {
 		sctp_hdr = (struct sctp_hdr *)((char *)l3_hdr + info->l3_len);
@@ -226,6 +231,7 @@ encapsulation(struct rte_mbuf *m, uint8_t queue_id)
 		ol_flags |= process_inner_cksums(phdr, &tx_offload);
 		m->l2_len = tx_offload.l2_len;
 		m->l3_len = tx_offload.l3_len;
+		m->l4_len = tx_offload.l4_len;
 		m->l2_len += ETHER_VXLAN_HLEN;
 	}
 
@@ -233,6 +239,7 @@ encapsulation(struct rte_mbuf *m, uint8_t queue_id)
 	m->outer_l3_len = sizeof(struct ipv4_hdr);
 
 	m->ol_flags |= ol_flags;
+	m->tso_segsz = tx_offload.tso_segsz;
 
 	/*VXLAN HEADER*/
 	vxlan->vx_flags = rte_cpu_to_be_32(VXLAN_HF_VNI);
diff --git a/examples/tep_termination/vxlan.h b/examples/tep_termination/vxlan.h
index 090eb48..4242e11 100644
--- a/examples/tep_termination/vxlan.h
+++ b/examples/tep_termination/vxlan.h
@@ -48,6 +48,7 @@
 extern struct ipv4_hdr app_ip_hdr[VXLAN_N_PORTS];
 extern struct ether_hdr app_l2_hdr[VXLAN_N_PORTS];
 extern uint8_t tx_checksum;
+extern uint16_t tso_segsz;
 
 struct vxlan_port {
 	uint32_t vport_id;           /**< VirtIO port id */
@@ -73,6 +74,7 @@ union tunnel_offload_info {
 		uint64_t l2_len:7; /**< L2 (MAC) Header Length. */
 		uint64_t l3_len:9; /**< L3 (IP) Header Length. */
 		uint64_t l4_len:8; /**< L4 Header Length. */
+		uint64_t tso_segsz:16; /**< TCP TSO segment size */
 		uint64_t outer_l2_len:7; /**< outer L2 Header Length */
 		uint64_t outer_l3_len:16; /**< outer L3 Header Length */
 	};
diff --git a/examples/tep_termination/vxlan_setup.c b/examples/tep_termination/vxlan_setup.c
index 942fc06..a1cd218 100644
--- a/examples/tep_termination/vxlan_setup.c
+++ b/examples/tep_termination/vxlan_setup.c
@@ -205,6 +205,13 @@ vxlan_port_init(uint8_t port, struct rte_mempool *mbuf_pool)
 			ports_eth_addr[port].addr_bytes[4],
 			ports_eth_addr[port].addr_bytes[5]);
 
+	if (tso_segsz != 0) {
+		struct rte_eth_dev_info dev_info;
+		rte_eth_dev_info_get(port, &dev_info);
+		if ((dev_info.tx_offload_capa & DEV_TX_OFFLOAD_TCP_TSO) == 0)
+			RTE_LOG(WARNING, PORT,
+				"hardware TSO offload is not supported\n");
+	}
 	return 0;
 }
 
-- 
1.7.7.6

^ permalink raw reply	[flat|nested] 13+ messages in thread

* [dpdk-dev] [PATCH v4 09/10] examples/tep_termination:add bad Rx checksum statistics of inner IP and L4
  2015-06-18  1:03 [dpdk-dev] [PATCH v4 00/10] Add a VXLAN sample Jijiang Liu
                   ` (7 preceding siblings ...)
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 08/10] examples/tep_termination:add TSO offload configuration Jijiang Liu
@ 2015-06-18  1:03 ` Jijiang Liu
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 10/10] examples/tep_termination:add the configuration for encapsulation and the decapsulation Jijiang Liu
  9 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-06-18  1:03 UTC (permalink / raw)
  To: dev

The number of packets with bad RX IP and L4 checksum in inner header is recorded.

Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
 examples/tep_termination/main.c        |   10 +++++++++-
 examples/tep_termination/main.h        |    4 ++++
 examples/tep_termination/vxlan_setup.c |   10 ++++++++++
 examples/tep_termination/vxlan_setup.h |    2 ++
 4 files changed, 25 insertions(+), 1 deletions(-)

diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index 7b8246c..3b1e94a 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -1068,7 +1068,7 @@ print_stats(void)
 {
 	struct virtio_net_data_ll *dev_ll;
 	uint64_t tx_dropped, rx_dropped;
-	uint64_t tx, tx_total, rx, rx_total;
+	uint64_t tx, tx_total, rx, rx_total, rx_ip_csum, rx_l4_csum;
 	uint32_t device_fh;
 	const char clr[] = { 27, '[', '2', 'J', '\0' };
 	const char top_left[] = { 27, '[', '1', ';', '1', 'H', '\0' };
@@ -1093,12 +1093,18 @@ print_stats(void)
 			rx = rte_atomic64_read(
 				&dev_statistics[device_fh].rx_atomic);
 			rx_dropped = rx_total - rx;
+			rx_ip_csum = rte_atomic64_read(
+				&dev_statistics[device_fh].rx_bad_ip_csum);
+			rx_l4_csum = rte_atomic64_read(
+				&dev_statistics[device_fh].rx_bad_l4_csum);
 
 			printf("\nStatistics for device %"PRIu32" ----------"
 					"\nTX total:		%"PRIu64""
 					"\nTX dropped:		%"PRIu64""
 					"\nTX successful:		%"PRIu64""
 					"\nRX total:		%"PRIu64""
+					"\nRX bad IP csum:      %"PRIu64""
+					"\nRX bad L4 csum:      %"PRIu64""
 					"\nRX dropped:		%"PRIu64""
 					"\nRX successful:		%"PRIu64"",
 					device_fh,
@@ -1106,6 +1112,8 @@ print_stats(void)
 					tx_dropped,
 					tx,
 					rx_total,
+					rx_ip_csum,
+					rx_l4_csum,
 					rx_dropped,
 					rx);
 
diff --git a/examples/tep_termination/main.h b/examples/tep_termination/main.h
index 20fa5b3..a34301a 100644
--- a/examples/tep_termination/main.h
+++ b/examples/tep_termination/main.h
@@ -69,6 +69,10 @@ struct device_statistics {
 	uint64_t rx_total;
 	uint64_t tx;
 	rte_atomic64_t rx_atomic;
+	/**< Bad inner IP csum for tunneling pkt */
+	rte_atomic64_t rx_bad_ip_csum;
+	/**< Bad inner L4 csum for tunneling pkt */
+	rte_atomic64_t rx_bad_l4_csum;
 } __rte_cache_aligned;
 
 /**
diff --git a/examples/tep_termination/vxlan_setup.c b/examples/tep_termination/vxlan_setup.c
index a1cd218..2341f9e 100644
--- a/examples/tep_termination/vxlan_setup.c
+++ b/examples/tep_termination/vxlan_setup.c
@@ -427,6 +427,16 @@ vxlan_rx_pkts(struct virtio_net *dev, struct rte_mbuf **pkts_burst,
 	struct rte_mbuf *pkts_valid[rx_count];
 
 	for (i = 0; i < rx_count; i++) {
+		if (enable_stats) {
+			rte_atomic64_add(
+				&dev_statistics[dev->device_fh].rx_bad_ip_csum,
+				(pkts_burst[i]->ol_flags & PKT_RX_IP_CKSUM_BAD)
+				!= 0);
+			rte_atomic64_add(
+				&dev_statistics[dev->device_fh].rx_bad_ip_csum,
+				(pkts_burst[i]->ol_flags & PKT_RX_L4_CKSUM_BAD)
+				!= 0);
+		}
 		ret = vxlan_rx_process(pkts_burst[i]);
 		if (unlikely(ret < 0))
 			continue;
diff --git a/examples/tep_termination/vxlan_setup.h b/examples/tep_termination/vxlan_setup.h
index 96442e2..189d491 100644
--- a/examples/tep_termination/vxlan_setup.h
+++ b/examples/tep_termination/vxlan_setup.h
@@ -39,6 +39,8 @@ extern uint16_t udp_port;
 extern uint8_t filter_idx;
 extern uint8_t ports[RTE_MAX_ETHPORTS];
 extern struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
+extern uint32_t enable_stats;
+extern struct device_statistics dev_statistics[MAX_DEVICES];
 
 typedef int (*ol_port_configure_t)(uint8_t port,
 				   struct rte_mempool *mbuf_pool);
-- 
1.7.7.6

^ permalink raw reply	[flat|nested] 13+ messages in thread

* [dpdk-dev] [PATCH v4 10/10] examples/tep_termination:add the configuration for encapsulation and the decapsulation
  2015-06-18  1:03 [dpdk-dev] [PATCH v4 00/10] Add a VXLAN sample Jijiang Liu
                   ` (8 preceding siblings ...)
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 09/10] examples/tep_termination:add bad Rx checksum statistics of inner IP and L4 Jijiang Liu
@ 2015-06-18  1:03 ` Jijiang Liu
  9 siblings, 0 replies; 13+ messages in thread
From: Jijiang Liu @ 2015-06-18  1:03 UTC (permalink / raw)
  To: dev

The two flags are enabled by default. Sometimes we want to know the performance influence of the encapsulation and decapsulation operations, and
I think we should add the two configuration options.

Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
 examples/tep_termination/main.c        |   40 ++++++++++++++++++++++++++++++++
 examples/tep_termination/vxlan_setup.c |   11 +++++++-
 examples/tep_termination/vxlan_setup.h |    2 +
 3 files changed, 51 insertions(+), 2 deletions(-)

diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index 3b1e94a..95b4f6a 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -116,6 +116,8 @@
 #define CMD_LINE_OPT_TX_CHECKSUM "tx-checksum"
 #define CMD_LINE_OPT_TSO_SEGSZ "tso-segsz"
 #define CMD_LINE_OPT_FILTER_TYPE "filter-type"
+#define CMD_LINE_OPT_ENCAP "encap"
+#define CMD_LINE_OPT_DECAP "decap"
 #define CMD_LINE_OPT_RX_RETRY "rx-retry"
 #define CMD_LINE_OPT_RX_RETRY_DELAY "rx-retry-delay"
 #define CMD_LINE_OPT_RX_RETRY_NUM "rx-retry-num"
@@ -149,6 +151,12 @@ uint8_t tx_checksum;
 /* TCP segment size */
 uint16_t tso_segsz = 0;
 
+/* enable/disable decapsulation */
+uint8_t rx_decap = 1;
+
+/* enable/disable encapsulation */
+uint8_t tx_encap = 1;
+
 /* RX filter type for tunneling packet */
 uint8_t filter_idx = 1;
 
@@ -280,6 +288,8 @@ tep_termination_usage(const char *prgname)
 	"		--nb-devices[1-64]: The number of virtIO device\n"
 	"               --tx-checksum [0|1]: inner Tx checksum offload\n"
 	"               --tso-segsz [0-N]: TCP segment size\n"
+	"               --decap [0|1]: tunneling packet decapsulation\n"
+	"               --encap [0|1]: tunneling packet encapsulation\n"
 	"               --filter-type[1-3]: filter type for tunneling packet\n"
 	"                   1: Inner MAC and tenent ID\n"
 	"                   2: Inner MAC and VLAN, and tenent ID\n"
@@ -311,6 +321,8 @@ tep_termination_parse_args(int argc, char **argv)
 		{CMD_LINE_OPT_UDP_PORT, required_argument, NULL, 0},
 		{CMD_LINE_OPT_TX_CHECKSUM, required_argument, NULL, 0},
 		{CMD_LINE_OPT_TSO_SEGSZ, required_argument, NULL, 0},
+		{CMD_LINE_OPT_DECAP, required_argument, NULL, 0},
+		{CMD_LINE_OPT_ENCAP, required_argument, NULL, 0},
 		{CMD_LINE_OPT_FILTER_TYPE, required_argument, NULL, 0},
 		{CMD_LINE_OPT_RX_RETRY, required_argument, NULL, 0},
 		{CMD_LINE_OPT_RX_RETRY_DELAY, required_argument, NULL, 0},
@@ -443,6 +455,34 @@ tep_termination_parse_args(int argc, char **argv)
 					filter_idx = ret - 1;
 			}
 
+			/* Enable/disable encapsulation on RX. */
+			if (!strncmp(long_option[option_index].name,
+				CMD_LINE_OPT_DECAP,
+				sizeof(CMD_LINE_OPT_DECAP))) {
+				ret = parse_num_opt(optarg, 1);
+				if (ret == -1) {
+					RTE_LOG(INFO, VHOST_CONFIG,
+						"Invalid argument for decap [0|1]\n");
+					tep_termination_usage(prgname);
+					return -1;
+				} else
+					rx_decap = ret;
+			}
+
+			/* Enable/disable encapsulation on TX. */
+			if (!strncmp(long_option[option_index].name,
+				CMD_LINE_OPT_ENCAP,
+				sizeof(CMD_LINE_OPT_ENCAP))) {
+				ret = parse_num_opt(optarg, 1);
+				if (ret == -1) {
+					RTE_LOG(INFO, VHOST_CONFIG,
+						"Invalid argument for encap [0|1]\n");
+					tep_termination_usage(prgname);
+					return -1;
+				} else
+					tx_encap = ret;
+			}
+
 			/* Enable/disable stats. */
 			if (!strncmp(long_option[option_index].name,
 				CMD_LINE_OPT_STATS,
diff --git a/examples/tep_termination/vxlan_setup.c b/examples/tep_termination/vxlan_setup.c
index 2341f9e..51ad133 100644
--- a/examples/tep_termination/vxlan_setup.c
+++ b/examples/tep_termination/vxlan_setup.c
@@ -218,13 +218,20 @@ vxlan_port_init(uint8_t port, struct rte_mempool *mbuf_pool)
 static int
 vxlan_rx_process(struct rte_mbuf *pkt)
 {
-	return decapsulation(pkt);
+	int ret = 0;
+
+	if (rx_decap)
+		ret = decapsulation(pkt);
+
+	return ret;
 }
 
 static void
 vxlan_tx_process(uint8_t queue_id, struct rte_mbuf *pkt)
 {
-	encapsulation(pkt, queue_id);
+	if (tx_encap)
+		encapsulation(pkt, queue_id);
+
 	return;
 }
 
diff --git a/examples/tep_termination/vxlan_setup.h b/examples/tep_termination/vxlan_setup.h
index 189d491..1846540 100644
--- a/examples/tep_termination/vxlan_setup.h
+++ b/examples/tep_termination/vxlan_setup.h
@@ -41,6 +41,8 @@ extern uint8_t ports[RTE_MAX_ETHPORTS];
 extern struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
 extern uint32_t enable_stats;
 extern struct device_statistics dev_statistics[MAX_DEVICES];
+extern uint8_t rx_decap;
+extern uint8_t tx_encap;
 
 typedef int (*ol_port_configure_t)(uint8_t port,
 				   struct rte_mempool *mbuf_pool);
-- 
1.7.7.6

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [dpdk-dev] [PATCH v4 01/10] examples/tep_termination:initialize the VXLAN sample
  2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 01/10] examples/tep_termination:initialize the " Jijiang Liu
@ 2015-06-22  7:49   ` Thomas Monjalon
  2015-06-22 13:55     ` Liu, Jijiang
  0 siblings, 1 reply; 13+ messages in thread
From: Thomas Monjalon @ 2015-06-22  7:49 UTC (permalink / raw)
  To: Jijiang Liu; +Cc: dev

2015-06-18 09:03, Jijiang Liu:
> This sample uses the basic virtio devices management function from the vHost example, which includes virtio device creation, destroying and maintenance.

Please wrap commit message to about 72 characters.
https://github.com/erlang/otp/wiki/Writing-good-commit-messages
https://git-scm.com/book/ch5-2.html

typo in Makefile:
overriden -> overridden

There are 2 functions where ret is incremented but never initialized:
examples/tep_termination/main.c:473:6: error: ‘ret’ may be used uninitialized in this function
examples/tep_termination/main.c:536:8: error: ‘ret’ may be used uninitialized in this function

Making a patch buildable with recent GCC and clang is the minimum before submitting it.

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [dpdk-dev] [PATCH v4 01/10] examples/tep_termination:initialize the VXLAN sample
  2015-06-22  7:49   ` Thomas Monjalon
@ 2015-06-22 13:55     ` Liu, Jijiang
  0 siblings, 0 replies; 13+ messages in thread
From: Liu, Jijiang @ 2015-06-22 13:55 UTC (permalink / raw)
  To: Thomas Monjalon; +Cc: dev



> -----Original Message-----
> From: Thomas Monjalon [mailto:thomas.monjalon@6wind.com]
> Sent: Monday, June 22, 2015 3:49 PM
> To: Liu, Jijiang
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v4 01/10] examples/tep_termination:initialize
> the VXLAN sample
> 
> 2015-06-18 09:03, Jijiang Liu:
> > This sample uses the basic virtio devices management function from the vHost
> example, which includes virtio device creation, destroying and maintenance.
> 
> Please wrap commit message to about 72 characters.
> https://github.com/erlang/otp/wiki/Writing-good-commit-messages
> https://git-scm.com/book/ch5-2.html

Ok, will follow this rule.

> typo in Makefile:
> overriden -> overridden
> 
> There are 2 functions where ret is incremented but never initialized:
> examples/tep_termination/main.c:473:6: error: ‘ret’ may be used uninitialized in
> this function
> examples/tep_termination/main.c:536:8: error: ‘ret’ may be used uninitialized in
> this function
> 
> Making a patch buildable with recent GCC and clang is the minimum before
> submitting it.

There is no a such error when I used GCC version 4.6.2.
I will check the codes and use latest gcc version and clang to try.

Anyway, thanks.



^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, other threads:[~2015-06-22 13:55 UTC | newest]

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-06-18  1:03 [dpdk-dev] [PATCH v4 00/10] Add a VXLAN sample Jijiang Liu
2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 01/10] examples/tep_termination:initialize the " Jijiang Liu
2015-06-22  7:49   ` Thomas Monjalon
2015-06-22 13:55     ` Liu, Jijiang
2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 02/10] examples/tep_termination:define the basic VXLAN port information Jijiang Liu
2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 03/10] examples/tep_termination:add the pluggable structures for VXLAN packet processing Jijiang Liu
2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 04/10] examples/tep_termination:implement " Jijiang Liu
2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 05/10] examples/tep_termination:add UDP port configuration for UDP tunneling packet Jijiang Liu
2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 06/10] examples/tep_termination:add tunnel filter type configuration Jijiang Liu
2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 07/10] examples/tep_termination:add Tx checksum offload configuration for inner header Jijiang Liu
2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 08/10] examples/tep_termination:add TSO offload configuration Jijiang Liu
2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 09/10] examples/tep_termination:add bad Rx checksum statistics of inner IP and L4 Jijiang Liu
2015-06-18  1:03 ` [dpdk-dev] [PATCH v4 10/10] examples/tep_termination:add the configuration for encapsulation and the decapsulation Jijiang Liu

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).