DPDK patches and discussions
 help / color / mirror / Atom feed
From: Maryam Tahhan <maryam.tahhan@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v3 6/7] app: remove dump_cfg
Date: Fri, 26 Jun 2015 13:59:17 +0100	[thread overview]
Message-ID: <1435323558-169985-7-git-send-email-maryam.tahhan@intel.com> (raw)
In-Reply-To: <1435323558-169985-1-git-send-email-maryam.tahhan@intel.com>

Remove the dump_cfg application, this will be replaced by a new app
called proc_info that will implement the same functionality as dump_cfg
and extend it to retrieve statistics for DPDK ports.

Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
---
 app/Makefile          |  1 -
 app/dump_cfg/Makefile | 45 -------------------------
 app/dump_cfg/main.c   | 92 ---------------------------------------------------
 3 files changed, 138 deletions(-)
 delete mode 100644 app/dump_cfg/Makefile
 delete mode 100644 app/dump_cfg/main.c

diff --git a/app/Makefile b/app/Makefile
index 50c670b..81bd222 100644
--- a/app/Makefile
+++ b/app/Makefile
@@ -36,6 +36,5 @@ DIRS-$(CONFIG_RTE_LIBRTE_ACL) += test-acl
 DIRS-$(CONFIG_RTE_LIBRTE_PIPELINE) += test-pipeline
 DIRS-$(CONFIG_RTE_TEST_PMD) += test-pmd
 DIRS-$(CONFIG_RTE_LIBRTE_CMDLINE) += cmdline_test
-DIRS-$(CONFIG_RTE_LIBRTE_EAL_LINUXAPP) += dump_cfg
 
 include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/app/dump_cfg/Makefile b/app/dump_cfg/Makefile
deleted file mode 100644
index 3257127..0000000
--- a/app/dump_cfg/Makefile
+++ /dev/null
@@ -1,45 +0,0 @@
-#   BSD LICENSE
-#
-#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
-#   All rights reserved.
-#
-#   Redistribution and use in source and binary forms, with or without
-#   modification, are permitted provided that the following conditions
-#   are met:
-#
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in
-#       the documentation and/or other materials provided with the
-#       distribution.
-#     * Neither the name of Intel Corporation nor the names of its
-#       contributors may be used to endorse or promote products derived
-#       from this software without specific prior written permission.
-#
-#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-APP = dump_cfg
-
-CFLAGS += $(WERROR_FLAGS)
-
-# all source are stored in SRCS-y
-
-SRCS-y := main.c
-
-# this application needs libraries first
-DEPDIRS-y += lib
-
-include $(RTE_SDK)/mk/rte.app.mk
diff --git a/app/dump_cfg/main.c b/app/dump_cfg/main.c
deleted file mode 100644
index 127dbb1..0000000
--- a/app/dump_cfg/main.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*-
- *   BSD LICENSE
- *
- *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- *   All rights reserved.
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in
- *       the documentation and/or other materials provided with the
- *       distribution.
- *     * Neither the name of Intel Corporation nor the names of its
- *       contributors may be used to endorse or promote products derived
- *       from this software without specific prior written permission.
- *
- *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdint.h>
-#include <errno.h>
-#include <stdarg.h>
-#include <inttypes.h>
-#include <sys/queue.h>
-#include <stdlib.h>
-
-#include <rte_memory.h>
-#include <rte_memzone.h>
-#include <rte_launch.h>
-#include <rte_tailq.h>
-#include <rte_eal.h>
-#include <rte_per_lcore.h>
-#include <rte_lcore.h>
-#include <rte_debug.h>
-#include <rte_log.h>
-#include <rte_atomic.h>
-#include <rte_branch_prediction.h>
-#include <rte_string_fns.h>
-
-int
-main(int argc, char **argv)
-{
-	int ret;
-	int i;
-	char c_flag[] = "-c1";
-	char n_flag[] = "-n4";
-	char mp_flag[] = "--proc-type=secondary";
-	char *argp[argc + 3];
-	argp[0] = argv[0];
-	argp[1] = c_flag;
-	argp[2] = n_flag;
-	argp[3] = mp_flag;
-
-	for(i = 1; i < argc; i++) {
-		argp[i + 3] = argv[i];
-	}
-	argc += 3;
-
-	ret = rte_eal_init(argc, argp);
-	if (ret < 0)
-		rte_panic("Cannot init EAL\n");
-
-	printf("----------- MEMORY_SEGMENTS -----------\n");
-	rte_dump_physmem_layout(stdout);
-	printf("--------- END_MEMORY_SEGMENTS ---------\n");
-
-	printf("------------ MEMORY_ZONES -------------\n");
-	rte_memzone_dump(stdout);
-	printf("---------- END_MEMORY_ZONES -----------\n");
-
-	printf("------------- TAIL_QUEUES -------------\n");
-	rte_dump_tailq(stdout);
-	printf("---------- END_TAIL_QUEUES ------------\n");
-
-	return 0;
-}
-- 
1.9.3

  parent reply	other threads:[~2015-06-26 12:59 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-26 12:59 [dpdk-dev] [PATCH v3 0/7] Expose IXGBE extended stats to DPDK apps Maryam Tahhan
2015-06-26 12:59 ` [dpdk-dev] [PATCH v3 1/7] ixgbe: move stats register reads to a new function Maryam Tahhan
2015-06-26 12:59 ` [dpdk-dev] [PATCH v3 2/7] ixgbe: add functions to get and reset xstats Maryam Tahhan
2015-07-03 13:16   ` Olivier MATZ
2015-07-03 13:19     ` Olivier MATZ
2015-07-05  9:34       ` Tahhan, Maryam
2015-07-05 10:02         ` Tahhan, Maryam
2015-07-05  9:27     ` Tahhan, Maryam
2015-06-26 12:59 ` [dpdk-dev] [PATCH v3 3/7] ethdev: expose extended error stats Maryam Tahhan
2015-07-03 13:27   ` Olivier MATZ
2015-06-26 12:59 ` [dpdk-dev] [PATCH v3 4/7] ethdev: remove HW specific stats in stats structs Maryam Tahhan
2015-06-26 14:03   ` Kyle Larose
2015-06-26 14:30     ` Tahhan, Maryam
2015-06-26 14:37       ` Kyle Larose
2015-06-26 14:47         ` Tahhan, Maryam
2015-06-26 12:59 ` [dpdk-dev] [PATCH v3 5/7] ixgbe: add NIC specific stats removed from ethdev Maryam Tahhan
2015-06-26 12:59 ` Maryam Tahhan [this message]
2015-06-26 12:59 ` [dpdk-dev] [PATCH v3 7/7] app: add a new app proc_info Maryam Tahhan
2015-07-01 14:27 ` [dpdk-dev] [PATCH v3 0/7] Expose IXGBE extended stats to DPDK apps Tahhan, Maryam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1435323558-169985-7-git-send-email-maryam.tahhan@intel.com \
    --to=maryam.tahhan@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).