From: Maryam Tahhan <maryam.tahhan@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v3 7/7] app: add a new app proc_info
Date: Fri, 26 Jun 2015 13:59:18 +0100 [thread overview]
Message-ID: <1435323558-169985-8-git-send-email-maryam.tahhan@intel.com> (raw)
In-Reply-To: <1435323558-169985-1-git-send-email-maryam.tahhan@intel.com>
proc_info displays statistics information including extened stats for
given DPDK ports and dumps the memory information for DPDK.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
---
MAINTAINERS | 4 +
app/Makefile | 1 +
app/proc_info/Makefile | 45 +++++
app/proc_info/main.c | 512 +++++++++++++++++++++++++++++++++++++++++++++++++
mk/rte.sdktest.mk | 4 +-
5 files changed, 564 insertions(+), 2 deletions(-)
create mode 100644 app/proc_info/Makefile
create mode 100644 app/proc_info/main.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 54f0973..5184b31 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -488,3 +488,7 @@ F: examples/tep_termination/
F: examples/vmdq/
F: examples/vmdq_dcb/
F: doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst
+
+M: Maryam Tahhan <maryam.tahhan@intel.com>
+M: John McNamara <john.mcnamara@intel.com>
+F: app/proc_info/
diff --git a/app/Makefile b/app/Makefile
index 81bd222..88c0bad 100644
--- a/app/Makefile
+++ b/app/Makefile
@@ -36,5 +36,6 @@ DIRS-$(CONFIG_RTE_LIBRTE_ACL) += test-acl
DIRS-$(CONFIG_RTE_LIBRTE_PIPELINE) += test-pipeline
DIRS-$(CONFIG_RTE_TEST_PMD) += test-pmd
DIRS-$(CONFIG_RTE_LIBRTE_CMDLINE) += cmdline_test
+DIRS-$(CONFIG_RTE_LIBRTE_EAL_LINUXAPP) += proc_info
include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/app/proc_info/Makefile b/app/proc_info/Makefile
new file mode 100644
index 0000000..6759547
--- /dev/null
+++ b/app/proc_info/Makefile
@@ -0,0 +1,45 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+APP = proc_info
+
+CFLAGS += $(WERROR_FLAGS)
+
+# all source are stored in SRCS-y
+
+SRCS-y := main.c
+
+# this application needs libraries first
+DEPDIRS-y += lib
+
+include $(RTE_SDK)/mk/rte.app.mk
diff --git a/app/proc_info/main.c b/app/proc_info/main.c
new file mode 100644
index 0000000..b2a495a
--- /dev/null
+++ b/app/proc_info/main.c
@@ -0,0 +1,512 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <stdarg.h>
+#include <inttypes.h>
+#include <sys/queue.h>
+#include <stdlib.h>
+#include <getopt.h>
+
+#include <rte_eal.h>
+#include <rte_config.h>
+#include <rte_common.h>
+#include <rte_debug.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+#include <rte_memory.h>
+#include <rte_memzone.h>
+#include <rte_launch.h>
+#include <rte_tailq.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_debug.h>
+#include <rte_log.h>
+#include <rte_atomic.h>
+#include <rte_branch_prediction.h>
+#include <rte_string_fns.h>
+
+/* Maximum long option length for option parsing. */
+#define MAX_LONG_OPT_SZ 64
+#define RTE_LOGTYPE_APP RTE_LOGTYPE_USER1
+#define MAX_TX_QUEUE_STATS_MAPPINGS 1024 /* MAX_PORT of 32 @ 32 tx_queues/port */
+#define MAX_RX_QUEUE_STATS_MAPPINGS 4096 /* MAX_PORT of 32 @ 128 rx_queues/port */
+
+/**< mask of enabled ports */
+static uint32_t enabled_port_mask;
+/**< Enable stats. */
+static uint32_t enable_stats;
+/**< Enable xstats. */
+static uint32_t enable_xstats;
+/**< Enable stats reset. */
+static uint32_t reset_stats;
+/**< Enable xstats reset. */
+static uint32_t reset_xstats;
+/**< Enable memory info. */
+static uint32_t mem_info;
+/**
+ * The data structure associated with each port.
+ */
+struct rte_port {
+ uint8_t tx_queue_stats_mapping_enabled;
+ uint8_t rx_queue_stats_mapping_enabled;
+};
+
+struct rte_port *ports; /**< For all probed ethernet ports. */
+
+struct queue_stats_mappings {
+ uint8_t port_id;
+ uint16_t queue_id;
+ uint8_t stats_counter_id;
+} __rte_cache_aligned;
+
+static struct queue_stats_mappings
+ tx_queue_stats_mappings_array[MAX_TX_QUEUE_STATS_MAPPINGS];
+static struct queue_stats_mappings
+ rx_queue_stats_mappings_array[MAX_RX_QUEUE_STATS_MAPPINGS];
+
+static struct queue_stats_mappings *tx_queue_stats_mappings =
+ tx_queue_stats_mappings_array;
+static struct queue_stats_mappings *rx_queue_stats_mappings =
+ rx_queue_stats_mappings_array;
+
+static uint16_t nb_tx_queue_stats_mappings;
+static uint16_t nb_rx_queue_stats_mappings;
+
+/*
+ * Configurable number of RX/TX queues.
+ */
+static uint16_t nb_rxq = 1; /**< Number of RX queues per port. */
+static uint16_t nb_txq = 1; /**< Number of TX queues per port. */
+
+/**< display usage */
+static void
+proc_info_usage(const char *prgname)
+{
+ printf("%s [EAL options] -- -p PORTMASK\n"
+ " -m to display DPDK memory zones, segments and TAILQ information\n"
+ " -p PORTMASK: hexadecimal bitmask of ports to retrieve stats for\n"
+ " --stats: to display port statistics, enabled by default\n"
+ " --xstats: to display extended port statistics, disabled by "
+ "default\n"
+ " --stats-reset: to reset port statistics\n"
+ " --xstats-reset: to reset port extended statistics\n",
+ prgname);
+ return;
+}
+
+/*
+ * Parse the portmask provided at run time.
+ */
+static int
+parse_portmask(const char *portmask)
+{
+ char *end = NULL;
+ unsigned long pm;
+
+ errno = 0;
+
+ /* parse hexadecimal string */
+ pm = strtoul(portmask, &end, 16);
+ if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0') ||
+ (errno != 0)) {
+ printf("%s ERROR parsing the port mask\n", __func__);
+ return -1;
+ }
+
+ if (pm == 0)
+ return -1;
+
+ return pm;
+
+}
+
+/* Parse the argument given in the command line of the application */
+static int
+proc_info_parse_args(int argc, char **argv)
+{
+ int opt;
+ int option_index;
+ char *prgname = argv[0];
+ static struct option long_option[] = {
+ {"stats", 0, NULL, 0},
+ {"stats-reset", 0, NULL, 0},
+ {"xstats", 0, NULL, 0},
+ {"xstats-reset", 0, NULL, 0},
+ {NULL, 0, 0, 0}
+ };
+
+ if (argc == 1)
+ proc_info_usage(prgname);
+
+ /* Parse command line */
+ while ((opt = getopt_long(argc, argv, "p:m",
+ long_option, &option_index)) != EOF) {
+ switch (opt) {
+ /* portmask */
+ case 'p':
+ enabled_port_mask = parse_portmask(optarg);
+ if (enabled_port_mask == 0) {
+ printf("invalid portmask\n");
+ proc_info_usage(prgname);
+ return -1;
+ }
+ break;
+ case 'm':
+ mem_info = 1;
+ break;
+ case 0:
+ /* Print stats */
+ if (!strncmp(long_option[option_index].name, "stats",
+ MAX_LONG_OPT_SZ))
+ enable_stats = 1;
+ /* Print xstats */
+ else if (!strncmp(long_option[option_index].name, "xstats",
+ MAX_LONG_OPT_SZ))
+ enable_xstats = 1;
+ /* Reset stats */
+ if (!strncmp(long_option[option_index].name, "stats-reset",
+ MAX_LONG_OPT_SZ))
+ reset_stats = 1;
+ /* Reset xstats */
+ else if (!strncmp(long_option[option_index].name, "xstats-reset",
+ MAX_LONG_OPT_SZ))
+ reset_xstats = 1;
+ break;
+
+ default:
+ proc_info_usage(prgname);
+ return -1;
+ }
+ }
+ return 0;
+}
+
+static void
+meminfo_display(void)
+{
+ printf("----------- MEMORY_SEGMENTS -----------\n");
+ rte_dump_physmem_layout(stdout);
+ printf("--------- END_MEMORY_SEGMENTS ---------\n");
+
+ printf("------------ MEMORY_ZONES -------------\n");
+ rte_memzone_dump(stdout);
+ printf("---------- END_MEMORY_ZONES -----------\n");
+
+ printf("------------- TAIL_QUEUES -------------\n");
+ rte_dump_tailq(stdout);
+ printf("---------- END_TAIL_QUEUES ------------\n");
+}
+
+static void
+nic_stats_display(uint8_t port_id)
+{
+ struct rte_eth_stats stats;
+ uint8_t i;
+ struct rte_port *port = &ports[port_id];
+
+ static const char *nic_stats_border = "########################";
+
+ rte_eth_stats_get(port_id, &stats);
+ printf("\n %s NIC statistics for port %-2d %s\n",
+ nic_stats_border, port_id, nic_stats_border);
+
+ if ((!port->rx_queue_stats_mapping_enabled) && (!port->tx_queue_stats_mapping_enabled)) {
+ printf(" RX-packets: %-10"PRIu64" RX-missed: %-10"PRIu64" RX-bytes: "
+ "%-"PRIu64"\n",
+ stats.ipackets, stats.imissed, stats.ibytes);
+ printf(" RX-badcrc: %-10"PRIu64" RX-badlen: %-10"PRIu64" RX-errors: "
+ "%-"PRIu64"\n",
+ stats.ibadcrc, stats.ibadlen, stats.ierrors);
+ printf(" RX-nombuf: %-10"PRIu64"\n",
+ stats.rx_nombuf);
+ printf(" TX-packets: %-10"PRIu64" TX-errors: %-10"PRIu64" TX-bytes: "
+ "%-"PRIu64"\n",
+ stats.opackets, stats.oerrors, stats.obytes);
+ } else {
+ printf(" RX-packets: %10"PRIu64" RX-errors: %10"PRIu64
+ " RX-bytes: %10"PRIu64"\n",
+ stats.ipackets, stats.ierrors, stats.ibytes);
+ printf(" RX-badcrc: %10"PRIu64" RX-badlen: %10"PRIu64
+ " RX-errors: %10"PRIu64"\n",
+ stats.ibadcrc, stats.ibadlen, stats.ierrors);
+ printf(" RX-nombuf: %10"PRIu64"\n",
+ stats.rx_nombuf);
+ printf(" TX-packets: %10"PRIu64" TX-errors: %10"PRIu64
+ " TX-bytes: %10"PRIu64"\n",
+ stats.opackets, stats.oerrors, stats.obytes);
+ }
+
+ if (port->rx_queue_stats_mapping_enabled) {
+ printf("\n");
+ for (i = 0; i < RTE_ETHDEV_QUEUE_STAT_CNTRS; i++) {
+ printf(" Stats reg %2d RX-packets: %10"PRIu64
+ " RX-errors: %10"PRIu64
+ " RX-bytes: %10"PRIu64"\n",
+ i, stats.q_ipackets[i], stats.q_errors[i], stats.q_ibytes[i]);
+ }
+ }
+ if (port->tx_queue_stats_mapping_enabled) {
+ printf("\n");
+ for (i = 0; i < RTE_ETHDEV_QUEUE_STAT_CNTRS; i++) {
+ printf(" Stats reg %2d TX-packets: %10"PRIu64
+ " TX-bytes: %10"PRIu64"\n",
+ i, stats.q_opackets[i], stats.q_obytes[i]);
+ }
+ }
+
+ /* Display statistics of XON/XOFF pause frames, if any. */
+ if ((stats.tx_pause_xon | stats.rx_pause_xon |
+ stats.tx_pause_xoff | stats.rx_pause_xoff) > 0) {
+ printf(" RX-XOFF: %-10"PRIu64" RX-XON: %-10"PRIu64"\n",
+ stats.rx_pause_xoff, stats.rx_pause_xon);
+ printf(" TX-XOFF: %-10"PRIu64" TX-XON: %-10"PRIu64"\n",
+ stats.tx_pause_xoff, stats.tx_pause_xon);
+ }
+ printf(" %s############################%s\n",
+ nic_stats_border, nic_stats_border);
+}
+
+static void
+nic_stats_clear(uint8_t port_id)
+{
+ printf("\n Clearing NIC stats for port %d\n", port_id);
+ rte_eth_stats_reset(port_id);
+ printf("\n NIC statistics for port %d cleared\n", port_id);
+}
+
+static void
+nic_xstats_display(uint8_t port_id)
+{
+ struct rte_eth_xstats *xstats;
+ int len, ret, i;
+ static const char *nic_stats_border = "########################";
+
+ len = rte_eth_xstats_get(port_id, NULL, 0);
+ if (len < 0) {
+ printf("Cannot get xstats count\n");
+ return;
+ }
+ xstats = malloc(sizeof(xstats[0]) * len);
+ if (xstats == NULL) {
+ printf("Cannot allocate memory for xstats\n");
+ return;
+ }
+
+ printf("###### NIC extended statistics for port %-2d #########\n",
+ port_id);
+ printf("%s############################\n",
+ nic_stats_border);
+ ret = rte_eth_xstats_get(port_id, xstats, len);
+ if (ret < 0 || ret > len) {
+ printf("Cannot get xstats\n");
+ free(xstats);
+ return;
+ }
+
+ for (i = 0; i < len; i++)
+ printf("%s: %"PRIu64"\n", xstats[i].name, xstats[i].value);
+
+ printf("%s############################\n",
+ nic_stats_border);
+ free(xstats);
+}
+
+static void
+nic_xstats_clear(uint8_t port_id)
+{
+ printf("\n Clearing NIC xstats for port %d\n", port_id);
+ rte_eth_xstats_reset(port_id);
+ printf("\n NIC extended statistics for port %d cleared\n", port_id);
+}
+
+static int
+set_tx_queue_stats_mapping_registers(uint8_t port_id, struct rte_port *port)
+{
+ uint16_t i;
+ int diag;
+ uint8_t mapping_found = 0;
+
+ for (i = 0; i < nb_tx_queue_stats_mappings; i++) {
+ if ((tx_queue_stats_mappings[i].port_id == port_id) &&
+ (tx_queue_stats_mappings[i].queue_id < nb_txq)) {
+ diag = rte_eth_dev_set_tx_queue_stats_mapping(port_id,
+ tx_queue_stats_mappings[i].queue_id,
+ tx_queue_stats_mappings[i].stats_counter_id);
+ if (diag != 0)
+ return diag;
+ mapping_found = 1;
+ }
+ }
+
+ if (mapping_found)
+ port->tx_queue_stats_mapping_enabled = 1;
+
+ return 0;
+}
+
+static int
+set_rx_queue_stats_mapping_registers(uint8_t port_id, struct rte_port *port)
+{
+ uint16_t i;
+ int diag;
+ uint8_t mapping_found = 0;
+
+ for (i = 0; i < nb_rx_queue_stats_mappings; i++) {
+ if ((rx_queue_stats_mappings[i].port_id == port_id) &&
+ (rx_queue_stats_mappings[i].queue_id < nb_rxq)) {
+ diag = rte_eth_dev_set_rx_queue_stats_mapping(port_id,
+ rx_queue_stats_mappings[i].queue_id,
+ rx_queue_stats_mappings[i].stats_counter_id);
+ if (diag != 0)
+ return diag;
+ mapping_found = 1;
+ }
+ }
+
+ if (mapping_found)
+ port->rx_queue_stats_mapping_enabled = 1;
+
+ return 0;
+}
+
+static void
+map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port)
+{
+ int diag = 0;
+
+ diag = set_tx_queue_stats_mapping_registers(pi, port);
+ if (diag != 0) {
+ if (diag == -ENOTSUP) {
+ port->tx_queue_stats_mapping_enabled = 0;
+ printf("TX queue stats mapping not supported port id=%d\n",
+ pi);
+ } else
+ rte_exit(EXIT_FAILURE,
+ "set_tx_queue_stats_mapping_registers "
+ "failed for port id=%d diag=%d\n",
+ pi, diag);
+ }
+
+ diag = set_rx_queue_stats_mapping_registers(pi, port);
+ if (diag != 0) {
+ if (diag == -ENOTSUP) {
+ port->rx_queue_stats_mapping_enabled = 0;
+ printf("RX queue stats mapping not supported port id=%d\n",
+ pi);
+ } else
+ rte_exit(EXIT_FAILURE,
+ "set_rx_queue_stats_mapping_registers "
+ "failed for port id=%d diag=%d\n",
+ pi, diag);
+ }
+}
+
+int
+main(int argc, char **argv)
+{
+ int ret;
+ int i;
+ char c_flag[] = "-c1";
+ char n_flag[] = "-n4";
+ char mp_flag[] = "--proc-type=secondary";
+ char *argp[argc + 3];
+ uint8_t nb_ports;
+
+ argp[0] = argv[0];
+ argp[1] = c_flag;
+ argp[2] = n_flag;
+ argp[3] = mp_flag;
+
+ for (i = 1; i < argc; i++)
+ argp[i + 3] = argv[i];
+
+ argc += 3;
+
+ ret = rte_eal_init(argc, argp);
+ if (ret < 0)
+ rte_panic("Cannot init EAL\n");
+
+ argc -= ret;
+ argv += (ret - 3);
+
+ /* parse app arguments */
+ ret = proc_info_parse_args(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid argument\n");
+
+ if (mem_info) {
+ meminfo_display();
+ return 0;
+ }
+
+ nb_ports = rte_eth_dev_count();
+ if (nb_ports == 0)
+ rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
+
+
+ if (nb_ports > RTE_MAX_ETHPORTS)
+ nb_ports = RTE_MAX_ETHPORTS;
+
+ /* Configuration of Ethernet ports. */
+ ports = rte_zmalloc("proc_info: ports",
+ sizeof(struct rte_port) * nb_ports,
+ RTE_CACHE_LINE_SIZE);
+ if (ports == NULL)
+ rte_exit(EXIT_FAILURE,
+ "rte_zmalloc(%d struct rte_port) failed\n",
+ nb_ports);
+
+ /* If no port mask was specified*/
+ if (enabled_port_mask == 0)
+ enabled_port_mask = 0xffff;
+
+ for (i = 0; i < nb_ports; i++) {
+ map_port_queue_stats_mapping_registers(i, &ports[i]);
+ if (enabled_port_mask & (1 << i)) {
+ if (enable_stats)
+ nic_stats_display(i);
+ else if (enable_xstats)
+ nic_xstats_display(i);
+ else if (reset_stats)
+ nic_stats_clear(i);
+ else if (reset_xstats)
+ nic_xstats_clear(i);
+ }
+ }
+
+ return 0;
+}
diff --git a/mk/rte.sdktest.mk b/mk/rte.sdktest.mk
index 2696142..59a29de 100644
--- a/mk/rte.sdktest.mk
+++ b/mk/rte.sdktest.mk
@@ -66,7 +66,7 @@ test fast_test ring_test mempool_test perf_test:
fi
# this is a special target to ease the pain of running coverage tests
-# this runs all the autotests, cmdline_test script and dump_cfg
+# this runs all the autotests, cmdline_test script and proc_info
coverage:
@mkdir -p $(AUTOTEST_DIR) ; \
cd $(AUTOTEST_DIR) ; \
@@ -78,7 +78,7 @@ coverage:
$(RTE_OUTPUT)/app/test \
$(RTE_TARGET) \
$(BLACKLIST) $(WHITELIST) ; \
- $(RTE_OUTPUT)/app/dump_cfg --file-prefix=ring_perf ; \
+ $(RTE_OUTPUT)/app/proc_info --file-prefix=ring_perf -- -m; \
else \
echo "No test found, please do a 'make build' first, or specify O=" ;\
fi
--
1.9.3
next prev parent reply other threads:[~2015-06-26 12:59 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-26 12:59 [dpdk-dev] [PATCH v3 0/7] Expose IXGBE extended stats to DPDK apps Maryam Tahhan
2015-06-26 12:59 ` [dpdk-dev] [PATCH v3 1/7] ixgbe: move stats register reads to a new function Maryam Tahhan
2015-06-26 12:59 ` [dpdk-dev] [PATCH v3 2/7] ixgbe: add functions to get and reset xstats Maryam Tahhan
2015-07-03 13:16 ` Olivier MATZ
2015-07-03 13:19 ` Olivier MATZ
2015-07-05 9:34 ` Tahhan, Maryam
2015-07-05 10:02 ` Tahhan, Maryam
2015-07-05 9:27 ` Tahhan, Maryam
2015-06-26 12:59 ` [dpdk-dev] [PATCH v3 3/7] ethdev: expose extended error stats Maryam Tahhan
2015-07-03 13:27 ` Olivier MATZ
2015-06-26 12:59 ` [dpdk-dev] [PATCH v3 4/7] ethdev: remove HW specific stats in stats structs Maryam Tahhan
2015-06-26 14:03 ` Kyle Larose
2015-06-26 14:30 ` Tahhan, Maryam
2015-06-26 14:37 ` Kyle Larose
2015-06-26 14:47 ` Tahhan, Maryam
2015-06-26 12:59 ` [dpdk-dev] [PATCH v3 5/7] ixgbe: add NIC specific stats removed from ethdev Maryam Tahhan
2015-06-26 12:59 ` [dpdk-dev] [PATCH v3 6/7] app: remove dump_cfg Maryam Tahhan
2015-06-26 12:59 ` Maryam Tahhan [this message]
2015-07-01 14:27 ` [dpdk-dev] [PATCH v3 0/7] Expose IXGBE extended stats to DPDK apps Tahhan, Maryam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435323558-169985-8-git-send-email-maryam.tahhan@intel.com \
--to=maryam.tahhan@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).