From: Tetsuya Mukawa <mukawa@igel.co.jp>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v3 5/8] eal: Consolidate pci_map/unmap_device() of linuxapp and bsdapp
Date: Mon, 29 Jun 2015 11:56:47 +0900 [thread overview]
Message-ID: <1435546610-4533-6-git-send-email-mukawa@igel.co.jp> (raw)
In-Reply-To: <1435546610-4533-1-git-send-email-mukawa@igel.co.jp>
From: "Tetsuya.Mukawa" <mukawa@igel.co.jp>
The patch consolidates below functions, and implemented in common
eal code.
- pci_map_device()
- pci_unmap_device()
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
---
lib/librte_eal/bsdapp/eal/eal_pci.c | 12 +++----
lib/librte_eal/common/eal_common_pci.c | 57 +++++++++++++++++++++++++++++++++
lib/librte_eal/common/eal_private.h | 4 +--
lib/librte_eal/common/include/rte_pci.h | 1 +
lib/librte_eal/linuxapp/eal/eal_pci.c | 55 -------------------------------
lib/librte_ether/rte_ethdev.c | 1 +
6 files changed, 65 insertions(+), 65 deletions(-)
diff --git a/lib/librte_eal/bsdapp/eal/eal_pci.c b/lib/librte_eal/bsdapp/eal/eal_pci.c
index 2a623e3..56dc98c 100644
--- a/lib/librte_eal/bsdapp/eal/eal_pci.c
+++ b/lib/librte_eal/bsdapp/eal/eal_pci.c
@@ -275,7 +275,7 @@ fail:
}
/* map the PCI resource of a PCI device in virtual memory */
-static int
+int
pci_uio_map_resource(struct rte_pci_device *dev)
{
int i, map_idx, ret;
@@ -366,6 +366,9 @@ pci_scan_one(int dev_pci_fd, struct pci_conf *conf)
/* FreeBSD has no NUMA support (yet) */
dev->numa_node = 0;
+ /* FreeBSD has only one pass through driver */
+ dev->kdrv = RTE_KDRV_NIC_UIO;
+
/* parse resources */
switch (conf->pc_hdr & PCIM_HDRTYPE) {
case PCIM_HDRTYPE_NORMAL:
@@ -430,13 +433,6 @@ skipdev:
return 0;
}
-/* Map pci device */
-int
-pci_map_device(struct rte_pci_device *dev)
-{
- return pci_uio_map_resource(dev);
-}
-
/*
* Scan the content of the PCI bus, and add the devices in the devices
* list. Call pci_scan_one() for each pci entry found.
diff --git a/lib/librte_eal/common/eal_common_pci.c b/lib/librte_eal/common/eal_common_pci.c
index 6eb6257..00547d9 100644
--- a/lib/librte_eal/common/eal_common_pci.c
+++ b/lib/librte_eal/common/eal_common_pci.c
@@ -98,6 +98,63 @@ static struct rte_devargs *pci_devargs_lookup(struct rte_pci_device *dev)
return NULL;
}
+/* Map pci device */
+static int
+pci_map_device(struct rte_pci_device *dev)
+{
+ int ret = -1;
+
+ /* try mapping the NIC resources using VFIO if it exists */
+ switch (dev->kdrv) {
+ case RTE_KDRV_VFIO:
+#ifdef VFIO_PRESENT
+ if (pci_vfio_is_enabled())
+ ret = pci_vfio_map_resource(dev);
+#endif
+ break;
+ case RTE_KDRV_IGB_UIO:
+ case RTE_KDRV_UIO_GENERIC:
+ case RTE_KDRV_NIC_UIO:
+ /* map resources for devices that use uio */
+ ret = pci_uio_map_resource(dev);
+ break;
+ default:
+ RTE_LOG(DEBUG, EAL, " Not managed by a supported kernel driver,"
+ " skipped\n");
+ ret = 1;
+ break;
+ }
+
+ return ret;
+}
+
+#ifdef RTE_LIBRTE_EAL_HOTPLUG
+/* Unmap pci device */
+static void
+pci_unmap_device(struct rte_pci_device *dev)
+{
+ if (dev == NULL)
+ return;
+
+ /* try unmapping the NIC resources using VFIO if it exists */
+ switch (dev->kdrv) {
+ case RTE_KDRV_VFIO:
+ RTE_LOG(ERR, EAL, "Hotplug doesn't support vfio yet\n");
+ break;
+ case RTE_KDRV_IGB_UIO:
+ case RTE_KDRV_UIO_GENERIC:
+ case RTE_KDRV_NIC_UIO:
+ /* unmap resources for devices that use uio */
+ pci_uio_unmap_resource(dev);
+ break;
+ default:
+ RTE_LOG(DEBUG, EAL, " Not managed by a supported kernel driver,"
+ " skipped\n");
+ break;
+ }
+}
+#endif /* RTE_LIBRTE_EAL_HOTPLUG */
+
/*
* If vendor/device ID match, call the devinit() function of the
* driver.
diff --git a/lib/librte_eal/common/eal_private.h b/lib/librte_eal/common/eal_private.h
index fe2c596..badb55c 100644
--- a/lib/librte_eal/common/eal_private.h
+++ b/lib/librte_eal/common/eal_private.h
@@ -171,14 +171,14 @@ int pci_unbind_kernel_driver(struct rte_pci_device *dev);
* @return
* 0 on success, negative on error
*/
-int pci_map_device(struct rte_pci_device *dev);
+int pci_uio_map_resource(struct rte_pci_device *dev);
/**
* Unmap this device
*
* This function is private to EAL.
*/
-void pci_unmap_device(struct rte_pci_device *dev);
+void pci_uio_unmap_resource(struct rte_pci_device *dev);
/**
* Init tail queues for non-EAL library structures. This is to allow
diff --git a/lib/librte_eal/common/include/rte_pci.h b/lib/librte_eal/common/include/rte_pci.h
index 0a2ef09..bd1ef4e 100644
--- a/lib/librte_eal/common/include/rte_pci.h
+++ b/lib/librte_eal/common/include/rte_pci.h
@@ -148,6 +148,7 @@ enum rte_kernel_driver {
RTE_KDRV_IGB_UIO,
RTE_KDRV_VFIO,
RTE_KDRV_UIO_GENERIC,
+ RTE_KDRV_NIC_UIO,
};
/**
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c b/lib/librte_eal/linuxapp/eal/eal_pci.c
index 91e958e..5c30469 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
@@ -563,61 +563,6 @@ pci_config_space_set(struct rte_pci_device *dev)
}
#endif
-/* Map pci device */
-int
-pci_map_device(struct rte_pci_device *dev)
-{
- int ret = -1;
-
- /* try mapping the NIC resources using VFIO if it exists */
- switch (dev->kdrv) {
- case RTE_KDRV_VFIO:
-#ifdef VFIO_PRESENT
- if (pci_vfio_is_enabled())
- ret = pci_vfio_map_resource(dev);
-#endif
- break;
- case RTE_KDRV_IGB_UIO:
- case RTE_KDRV_UIO_GENERIC:
- /* map resources for devices that use uio */
- ret = pci_uio_map_resource(dev);
- break;
- default:
- RTE_LOG(DEBUG, EAL, " Not managed by a supported kernel driver,"
- " skipped\n");
- ret = 1;
- break;
- }
-
- return ret;
-}
-
-#ifdef RTE_LIBRTE_EAL_HOTPLUG
-/* Unmap pci device */
-void
-pci_unmap_device(struct rte_pci_device *dev)
-{
- if (dev == NULL)
- return;
-
- /* try unmapping the NIC resources using VFIO if it exists */
- switch (dev->kdrv) {
- case RTE_KDRV_VFIO:
- RTE_LOG(ERR, EAL, "Hotplug doesn't support vfio yet\n");
- break;
- case RTE_KDRV_IGB_UIO:
- case RTE_KDRV_UIO_GENERIC:
- /* unmap resources for devices that use uio */
- pci_uio_unmap_resource(dev);
- break;
- default:
- RTE_LOG(DEBUG, EAL, " Not managed by a supported kernel driver,"
- " skipped\n");
- break;
- }
-}
-#endif /* RTE_LIBRTE_EAL_HOTPLUG */
-
/* Init the PCI EAL subsystem */
int
rte_eal_pci_init(void)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 02cd07f..1822258 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -515,6 +515,7 @@ rte_eth_dev_is_detachable(uint8_t port_id)
switch (rte_eth_devices[port_id].pci_dev->kdrv) {
case RTE_KDRV_IGB_UIO:
case RTE_KDRV_UIO_GENERIC:
+ case RTE_KDRV_NIC_UIO:
break;
case RTE_KDRV_VFIO:
default:
--
2.1.4
next prev parent reply other threads:[~2015-06-29 2:57 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-19 6:21 [dpdk-dev] [PATCH 0/8] Add Port Hotplug support to BSD Tetsuya Mukawa
2015-05-19 6:21 ` [dpdk-dev] [PATCH 1/8] eal: Add pci_uio_alloc_uio_resource() Tetsuya Mukawa
2015-05-19 6:21 ` [dpdk-dev] [PATCH 2/8] eal: Add pci_uio_map_uio_resource_by_index() Tetsuya Mukawa
2015-05-19 6:21 ` [dpdk-dev] [PATCH 3/8] eal: Consolidate pci_map and mapped_pci_resource of linuxapp and bsdapp Tetsuya Mukawa
2015-05-19 6:21 ` [dpdk-dev] [PATCH 4/8] eal: Consolidate rte_eal_pci_probe/close_one_driver() " Tetsuya Mukawa
2015-06-26 8:21 ` [dpdk-dev] [PATCH v2 0/8] Add Port Hotplug support to BSD Tetsuya Mukawa
2015-06-26 8:21 ` [dpdk-dev] [PATCH v2 1/8] eal: Add pci_uio_alloc_uio_resource() Tetsuya Mukawa
2015-06-26 8:21 ` [dpdk-dev] [PATCH v2 2/8] eal: Add pci_uio_map_uio_resource_by_index() Tetsuya Mukawa
2015-06-26 8:21 ` [dpdk-dev] [PATCH v2 3/8] eal: Consolidate pci_map and mapped_pci_resource of linuxapp and bsdapp Tetsuya Mukawa
2015-06-26 8:21 ` [dpdk-dev] [PATCH v2 4/8] eal: Consolidate rte_eal_pci_probe/close_one_driver() " Tetsuya Mukawa
2015-06-26 8:21 ` [dpdk-dev] [PATCH v2 5/8] eal: Consolidate pci_map/unmap_device() " Tetsuya Mukawa
2015-06-26 8:21 ` [dpdk-dev] [PATCH v2 6/8] eal: Consolidate pci_map/unmap_resource() " Tetsuya Mukawa
2015-06-26 8:21 ` [dpdk-dev] [PATCH v2 7/8] eal: Consolidate pci uio functions " Tetsuya Mukawa
2015-06-26 8:21 ` [dpdk-dev] [PATCH v2 8/8] eal: Enable Port Hotplug as default in Linux and BSD Tetsuya Mukawa
2015-06-29 2:56 ` [dpdk-dev] [PATCH v3 0/8] Add Port Hotplug support to BSD Tetsuya Mukawa
2015-06-29 2:56 ` [dpdk-dev] [PATCH v3 1/8] eal: Add pci_uio_alloc_uio_resource() Tetsuya Mukawa
2015-06-29 13:24 ` Iremonger, Bernard
2015-06-30 2:31 ` Tetsuya Mukawa
2015-06-29 2:56 ` [dpdk-dev] [PATCH v3 2/8] eal: Add pci_uio_map_uio_resource_by_index() Tetsuya Mukawa
2015-06-29 13:36 ` Iremonger, Bernard
2015-06-30 2:34 ` Tetsuya Mukawa
2015-06-29 2:56 ` [dpdk-dev] [PATCH v3 3/8] eal: Consolidate pci_map and mapped_pci_resource of linuxapp and bsdapp Tetsuya Mukawa
2015-06-29 2:56 ` [dpdk-dev] [PATCH v3 4/8] eal: Consolidate rte_eal_pci_probe/close_one_driver() " Tetsuya Mukawa
2015-06-29 15:28 ` Bruce Richardson
2015-06-30 8:08 ` Tetsuya Mukawa
2015-06-30 12:50 ` Bruce Richardson
2015-06-29 2:56 ` Tetsuya Mukawa [this message]
2015-06-29 2:56 ` [dpdk-dev] [PATCH v3 6/8] eal: Consolidate pci_map/unmap_resource() " Tetsuya Mukawa
2015-06-29 2:56 ` [dpdk-dev] [PATCH v3 7/8] eal: Consolidate pci uio functions " Tetsuya Mukawa
2015-06-29 14:03 ` Iremonger, Bernard
2015-06-30 2:43 ` Tetsuya Mukawa
2015-06-30 8:28 ` Tetsuya Mukawa
2015-06-29 2:56 ` [dpdk-dev] [PATCH v3 8/8] eal: Enable Port Hotplug as default in Linux and BSD Tetsuya Mukawa
2015-06-30 8:26 ` [dpdk-dev] [PATCH v4] Add Port Hotplug support to BSD Tetsuya Mukawa
2015-06-30 8:26 ` [dpdk-dev] [PATCH v4] eal: Enable Port Hotplug as default in Linux and BSD Tetsuya Mukawa
2015-06-30 15:08 ` Iremonger, Bernard
2015-06-30 15:40 ` Bruce Richardson
2015-07-01 6:37 ` Tetsuya Mukawa
2015-07-08 22:15 ` Thomas Monjalon
2015-06-29 15:30 ` [dpdk-dev] [PATCH v3 0/8] Add Port Hotplug support to BSD Bruce Richardson
2015-06-30 8:08 ` Tetsuya Mukawa
2015-05-19 6:21 ` [dpdk-dev] [PATCH 5/8] eal: Consolidate pci_map/unmap_device() of linuxapp and bsdapp Tetsuya Mukawa
2015-05-19 6:21 ` [dpdk-dev] [PATCH 6/8] eal: Consolidate pci_map/unmap_resource() " Tetsuya Mukawa
2015-05-19 6:21 ` [dpdk-dev] [PATCH 7/8] eal: Consolidate pci uio functions " Tetsuya Mukawa
2015-05-19 6:21 ` [dpdk-dev] [PATCH 8/8] eal: Enable Port Hotplug as default in Linux and BSD Tetsuya Mukawa
2015-05-19 16:03 ` [dpdk-dev] [PATCH 0/8] Add Port Hotplug support to BSD Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435546610-4533-6-git-send-email-mukawa@igel.co.jp \
--to=mukawa@igel.co.jp \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).