DPDK patches and discussions
 help / color / mirror / Atom feed
From: John McNamara <john.mcnamara@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v3 4/7] i40e: add support for ieee1588 timestamping
Date: Thu,  2 Jul 2015 16:16:31 +0100	[thread overview]
Message-ID: <1435850194-7024-5-git-send-email-john.mcnamara@intel.com> (raw)
In-Reply-To: <1435850194-7024-1-git-send-email-john.mcnamara@intel.com>

Add ixgbe support for new ethdev APIs to enable and read IEEE1588/
802.1AS PTP timestamps.

Signed-off-by: John McNamara <john.mcnamara@intel.com>
---
 drivers/net/i40e/i40e_ethdev.c | 143 +++++++++++++++++++++++++++++++++++++++++
 drivers/net/i40e/i40e_rxtx.c   |  39 ++++++++++-
 2 files changed, 181 insertions(+), 1 deletion(-)

diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 2ada502..a6875d0 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -55,6 +55,7 @@
 #include "base/i40e_prototype.h"
 #include "base/i40e_adminq_cmd.h"
 #include "base/i40e_type.h"
+#include "base/i40e_register.h"
 #include "i40e_ethdev.h"
 #include "i40e_rxtx.h"
 #include "i40e_pf.h"
@@ -106,6 +107,12 @@
 	(1UL << RTE_ETH_FLOW_NONFRAG_IPV6_OTHER) | \
 	(1UL << RTE_ETH_FLOW_L2_PAYLOAD))
 
+#define I40E_PTP_40GB_INCVAL  0x0199999999ULL
+#define I40E_PTP_10GB_INCVAL  0x0333333333ULL
+#define I40E_PTP_1GB_INCVAL   0x2000000000ULL
+#define I40E_PRTTSYN_TSYNENA  0x80000000
+#define I40E_PRTTSYN_TSYNTYPE 0x0e000000
+
 static int eth_i40e_dev_init(struct rte_eth_dev *eth_dev);
 static int i40e_dev_configure(struct rte_eth_dev *dev);
 static int i40e_dev_start(struct rte_eth_dev *dev);
@@ -212,6 +219,14 @@ static int i40e_dev_filter_ctrl(struct rte_eth_dev *dev,
 static void i40e_configure_registers(struct i40e_hw *hw);
 static void i40e_hw_init(struct i40e_hw *hw);
 
+static int i40e_timesync_enable(struct rte_eth_dev *dev);
+static int i40e_timesync_disable(struct rte_eth_dev *dev);
+static int i40e_timesync_read_rx_timestamp(struct rte_eth_dev *dev,
+					   struct timespec *timestamp,
+					   uint32_t flags);
+static int i40e_timesync_read_tx_timestamp(struct rte_eth_dev *dev,
+					   struct timespec *timestamp);
+
 static const struct rte_pci_id pci_id_i40e_map[] = {
 #define RTE_PCI_DEV_ID_DECL_I40E(vend, dev) {RTE_PCI_DEVICE(vend, dev)},
 #include "rte_pci_dev_ids.h"
@@ -262,6 +277,10 @@ static const struct eth_dev_ops i40e_eth_dev_ops = {
 	.udp_tunnel_add               = i40e_dev_udp_tunnel_add,
 	.udp_tunnel_del               = i40e_dev_udp_tunnel_del,
 	.filter_ctrl                  = i40e_dev_filter_ctrl,
+	.timesync_enable              = i40e_timesync_enable,
+	.timesync_disable             = i40e_timesync_disable,
+	.timesync_read_rx_timestamp   = i40e_timesync_read_rx_timestamp,
+	.timesync_read_tx_timestamp   = i40e_timesync_read_tx_timestamp,
 };
 
 static struct eth_driver rte_i40e_pmd = {
@@ -5697,3 +5716,127 @@ i40e_configure_registers(struct i40e_hw *hw)
 			"0x%"PRIx32, reg_table[i].val, reg_table[i].addr);
 	}
 }
+
+static int
+i40e_timesync_enable(struct rte_eth_dev *dev)
+{
+	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	struct rte_eth_link *link = &dev->data->dev_link;
+	uint32_t tsync_ctl_l;
+	uint32_t tsync_ctl_h;
+	uint32_t tsync_inc_l;
+	uint32_t tsync_inc_h;
+
+	switch (link->link_speed) {
+	case ETH_LINK_SPEED_40G:
+		tsync_inc_l = I40E_PTP_40GB_INCVAL & 0xFFFFFFFF;
+		tsync_inc_h = I40E_PTP_40GB_INCVAL >> 32;
+		break;
+	case ETH_LINK_SPEED_10G:
+		tsync_inc_l = I40E_PTP_10GB_INCVAL & 0xFFFFFFFF;
+		tsync_inc_h = I40E_PTP_10GB_INCVAL >> 32;
+		break;
+	case ETH_LINK_SPEED_1000:
+		tsync_inc_l = I40E_PTP_1GB_INCVAL & 0xFFFFFFFF;
+		tsync_inc_h = I40E_PTP_1GB_INCVAL >> 32;
+		break;
+	default:
+		tsync_inc_l = 0x0;
+		tsync_inc_h = 0x0;
+	}
+
+	/* Clear timesync registers. */
+	I40E_READ_REG(hw, I40E_PRTTSYN_STAT_0);
+	I40E_READ_REG(hw, I40E_PRTTSYN_TXTIME_H);
+	I40E_READ_REG(hw, I40E_PRTTSYN_RXTIME_L(0));
+	I40E_READ_REG(hw, I40E_PRTTSYN_RXTIME_L(1));
+	I40E_READ_REG(hw, I40E_PRTTSYN_RXTIME_L(2));
+	I40E_READ_REG(hw, I40E_PRTTSYN_RXTIME_L(3));
+	I40E_READ_REG(hw, I40E_PRTTSYN_TXTIME_H);
+
+	/* Set the timesync increment value. */
+	I40E_WRITE_REG(hw, I40E_PRTTSYN_INC_L, tsync_inc_l);
+	I40E_WRITE_REG(hw, I40E_PRTTSYN_INC_H, tsync_inc_h);
+
+	/* Enable timestamping of PTP packets. */
+	tsync_ctl_l = I40E_READ_REG(hw, I40E_PRTTSYN_CTL0);
+	tsync_ctl_l |= I40E_PRTTSYN_TSYNENA;
+
+	tsync_ctl_h = I40E_READ_REG(hw, I40E_PRTTSYN_CTL1);
+	tsync_ctl_h |= I40E_PRTTSYN_TSYNENA;
+	tsync_ctl_h |= I40E_PRTTSYN_TSYNTYPE;
+
+	I40E_WRITE_REG(hw, I40E_PRTTSYN_CTL0, tsync_ctl_l);
+	I40E_WRITE_REG(hw, I40E_PRTTSYN_CTL1, tsync_ctl_h);
+
+	return 0;
+}
+
+static int
+i40e_timesync_disable(struct rte_eth_dev *dev)
+{
+	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	uint32_t tsync_ctl_l;
+	uint32_t tsync_ctl_h;
+
+	/* Disable timestamping of transmitted PTP packets. */
+	tsync_ctl_l = I40E_READ_REG(hw, I40E_PRTTSYN_CTL0);
+	tsync_ctl_l &= ~I40E_PRTTSYN_TSYNENA;
+
+	tsync_ctl_h = I40E_READ_REG(hw, I40E_PRTTSYN_CTL1);
+	tsync_ctl_h &= ~I40E_PRTTSYN_TSYNENA;
+
+	I40E_WRITE_REG(hw, I40E_PRTTSYN_CTL0, tsync_ctl_l);
+	I40E_WRITE_REG(hw, I40E_PRTTSYN_CTL1, tsync_ctl_h);
+
+	/* Set the timesync increment value. */
+	I40E_WRITE_REG(hw, I40E_PRTTSYN_INC_L, 0x0);
+	I40E_WRITE_REG(hw, I40E_PRTTSYN_INC_H, 0x0);
+
+	return 0;
+}
+
+static int
+i40e_timesync_read_rx_timestamp(struct rte_eth_dev *dev,
+				struct timespec *timestamp, uint32_t flags)
+{
+	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	uint32_t sync_status;
+	uint32_t rx_stmpl;
+	uint32_t rx_stmph;
+	uint32_t index = flags & 0x03;
+
+	sync_status = I40E_READ_REG(hw, I40E_PRTTSYN_STAT_1);
+	if ((sync_status & (1 << index)) == 0)
+		return -EINVAL;
+
+	rx_stmpl = I40E_READ_REG(hw, I40E_PRTTSYN_RXTIME_L(index));
+	rx_stmph = I40E_READ_REG(hw, I40E_PRTTSYN_RXTIME_H(index));
+
+	timestamp->tv_sec = (uint64_t)(((uint64_t)rx_stmph << 32) | rx_stmpl);
+	timestamp->tv_nsec = 0;
+
+	return  0;
+}
+
+static int
+i40e_timesync_read_tx_timestamp(struct rte_eth_dev *dev,
+				struct timespec *timestamp)
+{
+	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	uint32_t sync_status;
+	uint32_t tx_stmpl;
+	uint32_t tx_stmph;
+
+	sync_status = I40E_READ_REG(hw, I40E_PRTTSYN_STAT_0);
+	if ((sync_status & I40E_PRTTSYN_STAT_0_TXTIME_MASK) == 0)
+		return -EINVAL;
+
+	tx_stmpl = I40E_READ_REG(hw, I40E_PRTTSYN_TXTIME_L);
+	tx_stmph = I40E_READ_REG(hw, I40E_PRTTSYN_TXTIME_H);
+
+	timestamp->tv_sec = (uint64_t)(((uint64_t)tx_stmph << 32) | tx_stmpl);
+	timestamp->tv_nsec = 0;
+
+	return  0;
+}
diff --git a/drivers/net/i40e/i40e_rxtx.c b/drivers/net/i40e/i40e_rxtx.c
index 2de0ac4..3e9aace 100644
--- a/drivers/net/i40e/i40e_rxtx.c
+++ b/drivers/net/i40e/i40e_rxtx.c
@@ -159,7 +159,7 @@ i40e_rxd_ptype_to_pkt_flags(uint64_t qword)
 	static const uint64_t ip_ptype_map[I40E_MAX_PKT_TYPE] = {
 		0, /* PTYPE 0 */
 		0, /* PTYPE 1 */
-		0, /* PTYPE 2 */
+		PKT_RX_IEEE1588_PTP, /* PTYPE 2 */
 		0, /* PTYPE 3 */
 		0, /* PTYPE 4 */
 		0, /* PTYPE 5 */
@@ -719,6 +719,17 @@ i40e_rx_scan_hw_ring(struct i40e_rx_queue *rxq)
 			if (pkt_flags & PKT_RX_FDIR)
 				pkt_flags |= i40e_rxd_build_fdir(&rxdp[j], mb);
 
+#ifdef RTE_LIBRTE_IEEE1588
+			uint16_t tsyn = (qword1
+					 & (I40E_RXD_QW1_STATUS_TSYNVALID_MASK
+					   | I40E_RXD_QW1_STATUS_TSYNINDX_MASK))
+					 >> I40E_RX_DESC_STATUS_TSYNINDX_SHIFT;
+
+			if (tsyn & 0x04)
+				pkt_flags |= PKT_RX_IEEE1588_TMST;
+
+			mb->udata64 = tsyn & 0x03;
+#endif
 			mb->ol_flags = pkt_flags;
 		}
 
@@ -901,6 +912,7 @@ i40e_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
 		qword1 = rte_le_to_cpu_64(rxdp->wb.qword1.status_error_len);
 		rx_status = (qword1 & I40E_RXD_QW1_STATUS_MASK)
 				>> I40E_RXD_QW1_STATUS_SHIFT;
+
 		/* Check the DD bit first */
 		if (!(rx_status & (1 << I40E_RX_DESC_STATUS_DD_SHIFT)))
 			break;
@@ -960,6 +972,16 @@ i40e_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
 		if (pkt_flags & PKT_RX_FDIR)
 			pkt_flags |= i40e_rxd_build_fdir(&rxd, rxm);
 
+#ifdef RTE_LIBRTE_IEEE1588
+		uint16_t tsyn = (qword1 & (I40E_RXD_QW1_STATUS_TSYNVALID_MASK
+					| I40E_RXD_QW1_STATUS_TSYNINDX_MASK))
+					>> I40E_RX_DESC_STATUS_TSYNINDX_SHIFT;
+
+		if (tsyn & 0x04)
+			pkt_flags |= PKT_RX_IEEE1588_TMST;
+
+		rxm->udata64 = tsyn & 0x03;
+#endif
 		rxm->ol_flags = pkt_flags;
 
 		rx_pkts[nb_rx++] = rxm;
@@ -1010,6 +1032,7 @@ i40e_recv_scattered_pkts(void *rx_queue,
 		qword1 = rte_le_to_cpu_64(rxdp->wb.qword1.status_error_len);
 		rx_status = (qword1 & I40E_RXD_QW1_STATUS_MASK) >>
 					I40E_RXD_QW1_STATUS_SHIFT;
+
 		/* Check the DD bit */
 		if (!(rx_status & (1 << I40E_RX_DESC_STATUS_DD_SHIFT)))
 			break;
@@ -1120,6 +1143,16 @@ i40e_recv_scattered_pkts(void *rx_queue,
 		if (pkt_flags & PKT_RX_FDIR)
 			pkt_flags |= i40e_rxd_build_fdir(&rxd, rxm);
 
+#ifdef RTE_LIBRTE_IEEE1588
+		uint16_t tsyn = (qword1 & (I40E_RXD_QW1_STATUS_TSYNVALID_MASK
+					| I40E_RXD_QW1_STATUS_TSYNINDX_MASK))
+					>> I40E_RX_DESC_STATUS_TSYNINDX_SHIFT;
+
+		if (tsyn & 0x04)
+			pkt_flags |= PKT_RX_IEEE1588_TMST;
+
+		first_seg->udata64 = tsyn & 0x03;
+#endif
 		first_seg->ol_flags = pkt_flags;
 
 		/* Prefetch data of first segment, if configured to do so. */
@@ -2366,6 +2399,10 @@ i40e_tx_queue_init(struct i40e_tx_queue *txq)
 	tx_ctx.new_context = 1;
 	tx_ctx.base = txq->tx_ring_phys_addr / I40E_QUEUE_BASE_ADDR_UNIT;
 	tx_ctx.qlen = txq->nb_tx_desc;
+
+#ifdef RTE_LIBRTE_IEEE1588
+	tx_ctx.timesync_ena = 1;
+#endif
 	tx_ctx.rdylist = rte_le_to_cpu_16(vsi->info.qs_handle[0]);
 	if (vsi->type == I40E_VSI_FDIR)
 		tx_ctx.fd_ena = TRUE;
-- 
1.8.1.4

  parent reply	other threads:[~2015-07-02 15:17 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-29 13:42 [dpdk-dev] [PATCH v2 0/7] ethdev: " John McNamara
2015-06-29 13:42 ` [dpdk-dev] [PATCH v2 1/7] " John McNamara
2015-07-02 10:17   ` Thomas Monjalon
2015-07-02 15:14     ` Mcnamara, John
2015-06-29 13:42 ` [dpdk-dev] [PATCH v2 2/7] e1000: " John McNamara
2015-06-29 13:42 ` [dpdk-dev] [PATCH v2 3/7] ixgbe: " John McNamara
2015-06-29 13:42 ` [dpdk-dev] [PATCH v2 4/7] i40e: " John McNamara
2015-06-29 13:42 ` [dpdk-dev] [PATCH v2 5/7] app/testpmd: refactor ieee1588 forwarding John McNamara
2015-06-29 13:42 ` [dpdk-dev] [PATCH v2 6/7] doc: document ieee1588 forwarding mode John McNamara
2015-06-29 13:42 ` [dpdk-dev] [PATCH v2 7/7] abi: announce mbuf addition for ieee1588 in DPDK 2.2 John McNamara
2015-07-02  1:24 ` [dpdk-dev] [PATCH v2 0/7] ethdev: add support for ieee1588 timestamping Lu, Wenzhuo
2015-07-02 15:16 ` [dpdk-dev] [PATCH v3 " John McNamara
2015-07-02 15:16   ` [dpdk-dev] [PATCH v3 1/7] " John McNamara
2015-07-02 15:16   ` [dpdk-dev] [PATCH v3 2/7] e1000: " John McNamara
2015-07-02 15:16   ` [dpdk-dev] [PATCH v3 3/7] ixgbe: " John McNamara
2015-07-02 15:16   ` John McNamara [this message]
2015-07-02 15:16   ` [dpdk-dev] [PATCH v3 5/7] app/testpmd: refactor ieee1588 forwarding John McNamara
2015-07-02 15:16   ` [dpdk-dev] [PATCH v3 6/7] doc: document ieee1588 forwarding mode John McNamara
2015-07-02 15:16   ` [dpdk-dev] [PATCH v3 7/7] abi: announce mbuf addition for ieee1588 in DPDK 2.2 John McNamara
2015-07-06 13:16     ` Thomas Monjalon
2015-07-08 13:10       ` Bruce Richardson
2015-07-09 15:51         ` Thomas Monjalon
2015-07-09 16:01           ` Bruce Richardson
2015-07-03  8:22   ` [dpdk-dev] [PATCH v3 0/7] ethdev: add support for ieee1588 timestamping Lu, Wenzhuo
2015-07-08  1:59   ` Fu, JingguoX

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1435850194-7024-5-git-send-email-john.mcnamara@intel.com \
    --to=john.mcnamara@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).