From: Stephen Hemminger <stephen@networkplumber.org>
To: harish.patil@qlogic.com
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 1/4] eal: provide functions to access PCI config
Date: Thu, 9 Jul 2015 11:15:34 -0700 [thread overview]
Message-ID: <1436465737-16818-2-git-send-email-stephen@networkplumber.org> (raw)
In-Reply-To: <1436465737-16818-1-git-send-email-stephen@networkplumber.org>
Some drivers need ability to access PCI config (for example for power
management). This adds an abstraction to do this for both Linux
and BSD.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
lib/librte_eal/bsdapp/eal/eal_pci.c | 83 +++++++++++++++++++++++++
lib/librte_eal/bsdapp/eal/rte_eal_version.map | 5 ++
lib/librte_eal/common/include/rte_pci.h | 28 +++++++++
lib/librte_eal/linuxapp/eal/eal_pci.c | 50 +++++++++++++++
lib/librte_eal/linuxapp/eal/eal_pci_init.h | 11 ++++
lib/librte_eal/linuxapp/eal/eal_pci_uio.c | 14 +++++
lib/librte_eal/linuxapp/eal/eal_pci_vfio.c | 16 +++++
lib/librte_eal/linuxapp/eal/rte_eal_version.map | 5 ++
8 files changed, 212 insertions(+)
diff --git a/lib/librte_eal/bsdapp/eal/eal_pci.c b/lib/librte_eal/bsdapp/eal/eal_pci.c
index 12f39d9..63d52fc 100644
--- a/lib/librte_eal/bsdapp/eal/eal_pci.c
+++ b/lib/librte_eal/bsdapp/eal/eal_pci.c
@@ -358,6 +358,89 @@ error:
return -1;
}
+/* Read PCI config space. */
+int rte_eal_pci_read_config(const struct rte_pci_device *dev,
+ void *buf, size_t len, off_t offset)
+{
+ int fd = -1;
+ struct pci_io pi = {
+ .pi_sel = {
+ .pc_domain = dev->addr.domain,
+ .pc_bus = dev->addr.bus,
+ .pc_dev = dev->addr.devid,
+ .pc_func = dev->addr.function,
+ },
+ .pi_reg = offset,
+ .pi_width = len,
+ };
+
+ if (len == 3 || len > sizeof(pi.pi_data)) {
+ RTE_LOG(ERR, EAL, "%s(): invalid pci read length\n", __func__);
+ goto error;
+ }
+
+ fd = open("/dev/pci", O_RDONLY);
+ if (fd < 0) {
+ RTE_LOG(ERR, EAL, "%s(): error opening /dev/pci\n", __func__);
+ goto error;
+ }
+
+ if (ioctl(fd, PCIOCREAD, &pi) < 0)
+ goto error;
+ close(fd);
+
+ memcpy(buf, &pi.pi_data, len);
+ return 0;
+
+ error:
+ if (fd >= 0)
+ close(fd);
+ return -1;
+}
+
+/* Write PCI config space. */
+int rte_eal_pci_write_config(const struct rte_pci_device *dev,
+ const void *buf, size_t len, off_t offset)
+{
+ int fd = -1;
+
+ struct pci_io pi = {
+ .pi_sel = {
+ .pc_domain = dev->addr.domain,
+ .pc_bus = dev->addr.bus,
+ .pc_dev = dev->addr.devid,
+ .pc_func = dev->addr.function,
+ },
+ .pi_reg = offset,
+ .pi_data = *(u_int32_t *)buf,
+ .pi_width = len,
+ };
+
+ if (len == 3 || len > sizeof(pi.pi_data)) {
+ RTE_LOG(ERR, EAL, "%s(): invalid pci read length\n", __func__);
+ goto error;
+ }
+
+ memcpy(pi.pi_data, buf, len);
+
+ fd = open("/dev/pci", O_RDONLY);
+ if (fd < 0) {
+ RTE_LOG(ERR, EAL, "%s(): error opening /dev/pci\n", __func__);
+ goto error;
+ }
+
+ if (ioctl(fd, PCIOCWRITE, &pi) < 0)
+ goto error;
+
+ close(fd);
+ return 0;
+
+ error:
+ if (fd >= 0)
+ close(fd);
+ return -1;
+}
+
/* Init the PCI EAL subsystem */
int
rte_eal_pci_init(void)
diff --git a/lib/librte_eal/bsdapp/eal/rte_eal_version.map b/lib/librte_eal/bsdapp/eal/rte_eal_version.map
index 7e850a9..5dc801d 100644
--- a/lib/librte_eal/bsdapp/eal/rte_eal_version.map
+++ b/lib/librte_eal/bsdapp/eal/rte_eal_version.map
@@ -98,3 +98,8 @@ DPDK_2.0 {
local: *;
};
+
+DPDK_2.1 {
+ rte_eal_pci_read_config;
+ rte_eal_pci_write_config;
+} DPDK_2.0;
diff --git a/lib/librte_eal/common/include/rte_pci.h b/lib/librte_eal/common/include/rte_pci.h
index e96f389..2ec3f3a 100644
--- a/lib/librte_eal/common/include/rte_pci.h
+++ b/lib/librte_eal/common/include/rte_pci.h
@@ -453,6 +453,34 @@ void rte_eal_pci_register(struct rte_pci_driver *driver);
*/
void rte_eal_pci_unregister(struct rte_pci_driver *driver);
+/**
+ * Read PCI config space.
+ *
+ * @param device
+ * A pointer to a rte_pci_device structure describing the device
+ * to use
+ * @param buf
+ * A data buffer where the bytes should be read into
+ * @param size
+ * The length of the data buffer.
+ */
+int rte_eal_pci_read_config(const struct rte_pci_device *device,
+ void *buf, size_t len, off_t offset);
+
+/**
+ * Write PCI config space.
+ *
+ * @param device
+ * A pointer to a rte_pci_device structure describing the device
+ * to use
+ * @param buf
+ * A data buffer containing the bytes should be written
+ * @param size
+ * The length of the data buffer.
+ */
+int rte_eal_pci_write_config(const struct rte_pci_device *device,
+ const void *buf, size_t len, off_t offset);
+
#ifdef __cplusplus
}
#endif
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c b/lib/librte_eal/linuxapp/eal/eal_pci.c
index 1d5a13b..08ce5a9 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
@@ -522,6 +522,56 @@ pci_config_space_set(struct rte_pci_device *dev)
}
#endif
+/* Read PCI config space. */
+int rte_eal_pci_read_config(const struct rte_pci_device *device,
+ void *buf, size_t len, off_t offset)
+{
+ const struct rte_intr_handle *intr_handle = &device->intr_handle;
+
+ switch (intr_handle->type) {
+ case RTE_INTR_HANDLE_UIO:
+ case RTE_INTR_HANDLE_UIO_INTX:
+ return pci_uio_read_config(intr_handle, buf, len, offset);
+
+#ifdef VFIO_PRESENT
+ case RTE_INTR_HANDLE_VFIO_MSIX:
+ case RTE_INTR_HANDLE_VFIO_MSI:
+ case RTE_INTR_HANDLE_VFIO_LEGACY:
+ return pci_vfio_read_config(intr_handle, buf, len, offset);
+#endif
+ default:
+ RTE_LOG(ERR, EAL,
+ "Unknown handle type of fd %d\n",
+ intr_handle->fd);
+ return -1;
+ }
+}
+
+/* Write PCI config space. */
+int rte_eal_pci_write_config(const struct rte_pci_device *device,
+ const void *buf, size_t len, off_t offset)
+{
+ const struct rte_intr_handle *intr_handle = &device->intr_handle;
+
+ switch (intr_handle->type) {
+ case RTE_INTR_HANDLE_UIO:
+ case RTE_INTR_HANDLE_UIO_INTX:
+ return pci_uio_write_config(intr_handle, buf, len, offset);
+
+#ifdef VFIO_PRESENT
+ case RTE_INTR_HANDLE_VFIO_MSIX:
+ case RTE_INTR_HANDLE_VFIO_MSI:
+ case RTE_INTR_HANDLE_VFIO_LEGACY:
+ return pci_vfio_write_config(intr_handle, buf, len, offset);
+#endif
+ default:
+ RTE_LOG(ERR, EAL,
+ "Unknown handle type of fd %d\n",
+ intr_handle->fd);
+ return -1;
+ }
+}
+
/* Init the PCI EAL subsystem */
int
rte_eal_pci_init(void)
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_init.h b/lib/librte_eal/linuxapp/eal/eal_pci_init.h
index 7104b13..a17c708 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci_init.h
+++ b/lib/librte_eal/linuxapp/eal/eal_pci_init.h
@@ -49,6 +49,11 @@ void pci_uio_free_resource(struct rte_pci_device *dev,
int pci_uio_map_resource_by_index(struct rte_pci_device *dev, int res_idx,
struct mapped_pci_resource *uio_res, int map_idx);
+int pci_uio_read_config(const struct rte_intr_handle *intr_handle,
+ void *buf, size_t len, off_t offs);
+int pci_uio_write_config(const struct rte_intr_handle *intr_handle,
+ const void *buf, size_t len, off_t offs);
+
#ifdef VFIO_PRESENT
#define VFIO_MAX_GROUPS 64
@@ -57,6 +62,12 @@ int pci_vfio_enable(void);
int pci_vfio_is_enabled(void);
int pci_vfio_mp_sync_setup(void);
+/* access config space */
+int pci_vfio_read_config(const struct rte_intr_handle *intr_handle,
+ void *buf, size_t len, off_t offs);
+int pci_vfio_write_config(const struct rte_intr_handle *intr_handle,
+ const void *buf, size_t len, off_t offs);
+
/* map VFIO resource prototype */
int pci_vfio_map_resource(struct rte_pci_device *dev);
int pci_vfio_get_group_fd(int iommu_group_fd);
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_uio.c b/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
index c35feb4..fca7987 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
@@ -53,6 +53,20 @@ void *pci_map_addr = NULL;
#define OFF_MAX ((uint64_t)(off_t)-1)
+int
+pci_uio_read_config(const struct rte_intr_handle *intr_handle,
+ void *buf, size_t len, off_t offset)
+{
+ return pread(intr_handle->uio_cfg_fd, buf, len, offset);
+}
+
+int
+pci_uio_write_config(const struct rte_intr_handle *intr_handle,
+ const void *buf, size_t len, off_t offset)
+{
+ return pwrite(intr_handle->uio_cfg_fd, buf, len, offset);
+}
+
static int
pci_uio_set_bus_master(int dev_fd)
{
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c b/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
index 426953a..3d72ee1 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
@@ -77,6 +77,22 @@ EAL_REGISTER_TAILQ(rte_vfio_tailq)
/* per-process VFIO config */
static struct vfio_config vfio_cfg;
+int
+pci_vfio_read_config(const struct rte_intr_handle *intr_handle,
+ void *buf, size_t len, off_t offs)
+{
+ return pread64(intr_handle->vfio_dev_fd, buf, len,
+ VFIO_GET_REGION_ADDR(VFIO_PCI_CONFIG_REGION_INDEX) + offs);
+}
+
+int
+pci_vfio_write_config(const struct rte_intr_handle *intr_handle,
+ const void *buf, size_t len, off_t offs)
+{
+ return pwrite64(intr_handle->vfio_dev_fd, buf, len,
+ VFIO_GET_REGION_ADDR(VFIO_PCI_CONFIG_REGION_INDEX) + offs);
+}
+
/* get PCI BAR number where MSI-X interrupts are */
static int
pci_vfio_get_msix_bar(int fd, int *msix_bar, uint32_t *msix_table_offset,
diff --git a/lib/librte_eal/linuxapp/eal/rte_eal_version.map b/lib/librte_eal/linuxapp/eal/rte_eal_version.map
index 7e850a9..5dc801d 100644
--- a/lib/librte_eal/linuxapp/eal/rte_eal_version.map
+++ b/lib/librte_eal/linuxapp/eal/rte_eal_version.map
@@ -98,3 +98,8 @@ DPDK_2.0 {
local: *;
};
+
+DPDK_2.1 {
+ rte_eal_pci_read_config;
+ rte_eal_pci_write_config;
+} DPDK_2.0;
--
2.1.4
next prev parent reply other threads:[~2015-07-09 18:15 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-09 18:15 [dpdk-dev] [PATCH v4 0/4] bnx2x: new poll mode driver Stephen Hemminger
2015-07-09 18:15 ` Stephen Hemminger [this message]
2015-07-09 18:15 ` [dpdk-dev] [PATCH 2/4] bnx2x: driver core Stephen Hemminger
2015-07-09 18:15 ` [dpdk-dev] [PATCH 3/4] bnx2x: driver support routines Stephen Hemminger
2015-07-09 18:15 ` [dpdk-dev] [PATCH 4/4] bnx2x: enable PMD build Stephen Hemminger
2015-07-09 20:41 ` [dpdk-dev] [PATCH v4 0/4] bnx2x: new poll mode driver Thomas Monjalon
2015-07-09 21:15 ` Stephen Hemminger
2015-07-09 21:27 ` Thomas Monjalon
-- strict thread matches above, loose matches on Subject: below --
2015-07-08 0:08 [dpdk-dev] [PATCH v3 0/4] bnx2x: " Stephen Hemminger
2015-07-08 0:08 ` [dpdk-dev] [PATCH 1/4] eal: provide functions to access PCI config Stephen Hemminger
2015-07-08 15:04 ` Thomas Monjalon
[not found] ` <d35efa226d95495e804181b2246063d2@HQ1WP-EXMB11.corp.brocade.com>
2015-07-08 16:11 ` Stephen Hemminger
2015-07-08 16:34 ` Thomas Monjalon
2015-06-16 23:51 [dpdk-dev] [PATCH 0/4 v5] bnx2x: poll mode driver Stephen Hemminger
2015-06-16 23:51 ` [dpdk-dev] [PATCH 1/4] eal: provide functions to access PCI config Stephen Hemminger
2015-06-17 7:31 ` Panu Matilainen
2015-06-17 14:44 ` David Marchand
[not found] ` <513c51e29ab6449c99ae70c77e72566c@BRMWP-EXMB11.corp.brocade.com>
2015-07-09 21:08 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436465737-16818-2-git-send-email-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
--cc=harish.patil@qlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).