DPDK patches and discussions
 help / color / mirror / Atom feed
From: Thomas Monjalon <thomas.monjalon@6wind.com>
To: david.marchand@6wind.com
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v10 3/3] eal: deduplicate memory initialization
Date: Mon, 27 Jul 2015 02:56:34 +0200	[thread overview]
Message-ID: <1437958594-29468-4-git-send-email-thomas.monjalon@6wind.com> (raw)
In-Reply-To: <1437958594-29468-1-git-send-email-thomas.monjalon@6wind.com>

From: Ravi Kerur <rkerur@gmail.com>

Move common functions from BSD/Linux to eal_common_memory.c file.
BSD uses contigmem kernel module and Linux uses /proc/self/pagemap file.

Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
---
 lib/librte_eal/bsdapp/eal/eal_memory.c    | 39 ++-------------
 lib/librte_eal/common/eal_common_memory.c | 38 ++++++++++++++-
 lib/librte_eal/common/eal_private.h       | 18 +++++++
 lib/librte_eal/linuxapp/eal/eal_memory.c  | 80 ++++++++++---------------------
 4 files changed, 81 insertions(+), 94 deletions(-)

diff --git a/lib/librte_eal/bsdapp/eal/eal_memory.c b/lib/librte_eal/bsdapp/eal/eal_memory.c
index a3242a5..937e8db 100644
--- a/lib/librte_eal/bsdapp/eal/eal_memory.c
+++ b/lib/librte_eal/bsdapp/eal/eal_memory.c
@@ -59,7 +59,7 @@ rte_mem_virt2phy(const void *virtaddr)
 	return RTE_BAD_PHYS_ADDR;
 }
 
-static int
+int
 rte_eal_contigmem_init(void)
 {
 	struct rte_mem_config *mcfg;
@@ -132,8 +132,8 @@ rte_eal_contigmem_init(void)
 	return 0;
 }
 
-static int
-rte_eal_contigmem_attach(void)
+int
+rte_eal_hugepage_attach(void)
 {
 	const struct hugepage_info *hpi;
 	int fd_hugepage_info, fd_hugepage = -1;
@@ -192,36 +192,3 @@ error:
 		close(fd_hugepage);
 	return -1;
 }
-
-
-static int
-rte_eal_memdevice_init(void)
-{
-	struct rte_config *config;
-
-	if (rte_eal_process_type() == RTE_PROC_SECONDARY)
-		return 0;
-
-	config = rte_eal_get_configuration();
-	config->mem_config->nchannel = internal_config.force_nchannel;
-	config->mem_config->nrank = internal_config.force_nrank;
-
-	return 0;
-}
-
-/* init memory subsystem */
-int
-rte_eal_memory_init(void)
-{
-	RTE_LOG(INFO, EAL, "Setting up physically contiguous memory...\n");
-	const int retval = rte_eal_process_type() == RTE_PROC_PRIMARY ?
-			rte_eal_contigmem_init() :
-			rte_eal_contigmem_attach();
-	if (retval < 0)
-		return -1;
-
-	if (internal_config.no_shconf == 0 && rte_eal_memdevice_init() < 0)
-		return -1;
-
-	return 0;
-}
diff --git a/lib/librte_eal/common/eal_common_memory.c b/lib/librte_eal/common/eal_common_memory.c
index 9a07b1e..b647573 100644
--- a/lib/librte_eal/common/eal_common_memory.c
+++ b/lib/librte_eal/common/eal_common_memory.c
@@ -45,6 +45,7 @@
 #include <rte_log.h>
 
 #include "eal_private.h"
+#include "eal_internal_cfg.h"
 
 /*
  * Return a pointer to a read-only table of struct rte_physmem_desc
@@ -69,7 +70,7 @@ rte_eal_get_physmem_size(void)
 	/* get pointer to global configuration */
 	mcfg = rte_eal_get_configuration()->mem_config;
 
-	for (i=0; i<RTE_MAX_MEMSEG; i++) {
+	for (i = 0; i < RTE_MAX_MEMSEG; i++) {
 		if (mcfg->memseg[i].addr == NULL)
 			break;
 
@@ -89,7 +90,7 @@ rte_dump_physmem_layout(FILE *f)
 	/* get pointer to global configuration */
 	mcfg = rte_eal_get_configuration()->mem_config;
 
-	for (i=0; i<RTE_MAX_MEMSEG; i++) {
+	for (i = 0; i < RTE_MAX_MEMSEG; i++) {
 		if (mcfg->memseg[i].addr == NULL)
 			break;
 
@@ -118,3 +119,36 @@ unsigned rte_memory_get_nrank(void)
 {
 	return rte_eal_get_configuration()->mem_config->nrank;
 }
+
+static int
+rte_eal_memdevice_init(void)
+{
+	struct rte_config *config;
+
+	if (rte_eal_process_type() == RTE_PROC_SECONDARY)
+		return 0;
+
+	config = rte_eal_get_configuration();
+	config->mem_config->nchannel = internal_config.force_nchannel;
+	config->mem_config->nrank = internal_config.force_nrank;
+
+	return 0;
+}
+
+/* init memory subsystem */
+int
+rte_eal_memory_init(void)
+{
+	RTE_LOG(INFO, EAL, "Setting up physically contiguous memory...\n");
+
+	const int retval = rte_eal_process_type() == RTE_PROC_PRIMARY ?
+			rte_eal_hugepage_init() :
+			rte_eal_hugepage_attach();
+	if (retval < 0)
+		return -1;
+
+	if (internal_config.no_shconf == 0 && rte_eal_memdevice_init() < 0)
+		return -1;
+
+	return 0;
+}
diff --git a/lib/librte_eal/common/eal_private.h b/lib/librte_eal/common/eal_private.h
index f8e8869..072e672 100644
--- a/lib/librte_eal/common/eal_private.h
+++ b/lib/librte_eal/common/eal_private.h
@@ -328,4 +328,22 @@ void set_tsc_freq(void);
  */
 uint64_t get_tsc_freq(void);
 
+/**
+ * Prepare physical memory mapping
+ * i.e. hugepages on Linux and
+ *      contigmem on BSD.
+ *
+ * This function is private to the EAL.
+ */
+int rte_eal_hugepage_init(void);
+
+/**
+ * Creates memory mapping in secondary process
+ * i.e. hugepages on Linux and
+ *      contigmem on BSD.
+ *
+ * This function is private to the EAL.
+ */
+int rte_eal_hugepage_attach(void);
+
 #endif /* _EAL_PRIVATE_H_ */
diff --git a/lib/librte_eal/linuxapp/eal/eal_memory.c b/lib/librte_eal/linuxapp/eal/eal_memory.c
index d529016..ac2745e 100644
--- a/lib/librte_eal/linuxapp/eal/eal_memory.c
+++ b/lib/librte_eal/linuxapp/eal/eal_memory.c
@@ -115,6 +115,24 @@ static unsigned proc_pagemap_readable;
 
 #define RANDOMIZE_VA_SPACE_FILE "/proc/sys/kernel/randomize_va_space"
 
+static void
+test_proc_pagemap_readable(void)
+{
+	int fd = open("/proc/self/pagemap", O_RDONLY);
+
+	if (fd < 0) {
+		RTE_LOG(ERR, EAL,
+			"Cannot open /proc/self/pagemap: %s. "
+			"virt2phys address translation will not work\n",
+			strerror(errno));
+		return;
+	}
+
+	/* Is readable */
+	close(fd);
+	proc_pagemap_readable = 1;
+}
+
 /* Lock page in physical memory and prevent from swapping. */
 int
 rte_mem_lock_page(const void *virt)
@@ -1037,7 +1055,7 @@ calc_num_pages_per_socket(uint64_t * memory,
  *  6. unmap the first mapping
  *  7. fill memsegs in configuration with contiguous zones
  */
-static int
+int
 rte_eal_hugepage_init(void)
 {
 	struct rte_mem_config *mcfg;
@@ -1054,6 +1072,8 @@ rte_eal_hugepage_init(void)
 	int new_pages_count[MAX_HUGEPAGE_SIZES];
 #endif
 
+	test_proc_pagemap_readable();
+
 	memset(used_hp, 0, sizeof(used_hp));
 
 	/* get pointer to global configuration */
@@ -1087,7 +1107,6 @@ rte_eal_hugepage_init(void)
 #endif
 	}
 
-
 	/* calculate total number of hugepages available. at this point we haven't
 	 * yet started sorting them so they all are on socket 0 */
 	for (i = 0; i < (int) internal_config.num_hugepage_sizes; i++) {
@@ -1378,7 +1397,7 @@ getFileSize(int fd)
  * configuration and finds the hugepages which form that segment, mapping them
  * in order to form a contiguous block in the virtual memory space
  */
-static int
+int
 rte_eal_hugepage_attach(void)
 {
 	const struct rte_mem_config *mcfg = rte_eal_get_configuration()->mem_config;
@@ -1395,6 +1414,8 @@ rte_eal_hugepage_attach(void)
 				"into secondary processes\n");
 	}
 
+	test_proc_pagemap_readable();
+
 	if (internal_config.xen_dom0_support) {
 #ifdef RTE_LIBRTE_XEN_DOM0
 		if (rte_xen_dom0_memory_attach() < 0) {
@@ -1538,56 +1559,3 @@ error:
 		close(fd_hugepage);
 	return -1;
 }
-
-static int
-rte_eal_memdevice_init(void)
-{
-	struct rte_config *config;
-
-	if (rte_eal_process_type() == RTE_PROC_SECONDARY)
-		return 0;
-
-	config = rte_eal_get_configuration();
-	config->mem_config->nchannel = internal_config.force_nchannel;
-	config->mem_config->nrank = internal_config.force_nrank;
-
-	return 0;
-}
-
-static int
-test_proc_pagemap_readable(void)
-{
-	int fd = open("/proc/self/pagemap", O_RDONLY);
-
-	if (fd < 0)
-		return 0;
-	/* Is readable */
-	close(fd);
-
-	return 1;
-}
-
-/* init memory subsystem */
-int
-rte_eal_memory_init(void)
-{
-	RTE_LOG(INFO, EAL, "Setting up memory...\n");
-
-	proc_pagemap_readable = test_proc_pagemap_readable();
-	if (!proc_pagemap_readable)
-		RTE_LOG(ERR, EAL,
-			"Cannot open /proc/self/pagemap: %s. "
-			"virt2phys address translation will not work\n",
-			strerror(errno));
-
-	const int retval = rte_eal_process_type() == RTE_PROC_PRIMARY ?
-			rte_eal_hugepage_init() :
-			rte_eal_hugepage_attach();
-	if (retval < 0)
-		return -1;
-
-	if (internal_config.no_shconf == 0 && rte_eal_memdevice_init() < 0)
-		return -1;
-
-	return 0;
-}
-- 
2.4.2

  parent reply	other threads:[~2015-07-27  0:57 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-25 19:34 [dpdk-dev] [PATCH v9 0/3] Move EAL common functions Ravi Kerur
2015-07-25 19:36 ` [dpdk-dev] [PATCH v9 1/3] Move common functions in eal_lcore.c Ravi Kerur
2015-07-25 19:36   ` [dpdk-dev] [PATCH v9 2/3] Move common functions in eal_timer.c Ravi Kerur
2015-07-26 23:32     ` Thomas Monjalon
2015-07-26 23:40     ` Thomas Monjalon
2015-07-25 19:36   ` [dpdk-dev] [PATCH v9 3/3] Move common functions in eal_memory.c Ravi Kerur
2015-07-27  0:35     ` Thomas Monjalon
2015-07-25 19:36   ` [dpdk-dev] [PATCH v9 0/3] Move EAL common functions Ravi Kerur
2015-07-27  0:56 ` [dpdk-dev] [PATCH v10 0/3] deduplicate " Thomas Monjalon
2015-07-27  0:56   ` [dpdk-dev] [PATCH v10 1/3] eal: deduplicate lcore initialization Thomas Monjalon
2015-07-27  0:56   ` [dpdk-dev] [PATCH v10 2/3] eal: deduplicate timer functions Thomas Monjalon
2015-07-27  0:56   ` Thomas Monjalon [this message]
2015-07-27  0:59   ` [dpdk-dev] [PATCH v10 0/3] deduplicate EAL common functions Thomas Monjalon
2015-07-30  8:12     ` Olivier MATZ
2015-07-30 12:15       ` Ravi Kerur
2015-07-30 13:43       ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1437958594-29468-4-git-send-email-thomas.monjalon@6wind.com \
    --to=thomas.monjalon@6wind.com \
    --cc=david.marchand@6wind.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).