From: Cunming Liang <cunming.liang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v1] ixgbe: remove vector pmd burst size restriction
Date: Fri, 31 Jul 2015 16:17:49 +0800 [thread overview]
Message-ID: <1438330669-25942-1-git-send-email-cunming.liang@intel.com> (raw)
The patch removes the restriction of burst size on a constant 32.
On receive side, the burst size floor now aligns to RTE_IXGBE_DESCS_PER_LOOP power of 2.
According to this rule, the burst size less than 4 still won't receive anything.
(Before this change, the burst size less than 32 can't receive anything.)
On transmit side, the max burst size no longer bind with a constant, however it still
require to check the cross tx_rs_thresh violation.
There's no obvious performance drop found on both recv_pkts_vec
and recv_scattered_pkts_vec on burst size 32.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
---
drivers/net/ixgbe/ixgbe_rxtx.c | 3 ++-
drivers/net/ixgbe/ixgbe_rxtx.h | 4 +---
drivers/net/ixgbe/ixgbe_rxtx_vec.c | 35 ++++++++++++++++-------------------
3 files changed, 19 insertions(+), 23 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
index 3f808b3..dbdb761 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx.c
@@ -4008,7 +4008,8 @@ ixgbe_set_rx_function(struct rte_eth_dev *dev)
*/
} else if (adapter->rx_vec_allowed) {
PMD_INIT_LOG(DEBUG, "Vector rx enabled, please make sure RX "
- "burst size no less than 32.");
+ "burst size no less than 4 (port=%d).",
+ dev->data->port_id);
dev->rx_pkt_burst = ixgbe_recv_pkts_vec;
} else if (adapter->rx_bulk_alloc_allowed) {
diff --git a/drivers/net/ixgbe/ixgbe_rxtx.h b/drivers/net/ixgbe/ixgbe_rxtx.h
index 113682a..eb931fe 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.h
+++ b/drivers/net/ixgbe/ixgbe_rxtx.h
@@ -47,9 +47,7 @@
(uint64_t) ((mb)->buf_physaddr + RTE_PKTMBUF_HEADROOM)
#ifdef RTE_IXGBE_INC_VECTOR
-#define RTE_IXGBE_VPMD_RX_BURST 32
-#define RTE_IXGBE_VPMD_TX_BURST 32
-#define RTE_IXGBE_RXQ_REARM_THRESH RTE_IXGBE_VPMD_RX_BURST
+#define RTE_IXGBE_RXQ_REARM_THRESH 32
#define RTE_IXGBE_TX_MAX_FREE_BUF_SZ 64
#endif
diff --git a/drivers/net/ixgbe/ixgbe_rxtx_vec.c b/drivers/net/ixgbe/ixgbe_rxtx_vec.c
index 1c16dec..b72f817 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx_vec.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx_vec.c
@@ -199,13 +199,11 @@ desc_to_olflags_v(__m128i descs[4], struct rte_mbuf **rx_pkts)
#endif
/*
- * vPMD receive routine, now only accept (nb_pkts == RTE_IXGBE_VPMD_RX_BURST)
- * in one loop
+ * vPMD raw receive routine
*
* Notice:
- * - nb_pkts < RTE_IXGBE_VPMD_RX_BURST, just return no packet
- * - nb_pkts > RTE_IXGBE_VPMD_RX_BURST, only scan RTE_IXGBE_VPMD_RX_BURST
- * numbers of DD bit
+ * - floor align nb_pkts to a RTE_IXGBE_DESC_PER_LOOP power-of-two
+ * - 'nb_pkts < 4' causes 0 packet receiving
* - don't support ol_flags for rss and csum err
*/
static inline uint16_t
@@ -240,8 +238,7 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts,
__m128i dd_check, eop_check;
#endif /* RTE_NEXT_ABI */
- if (unlikely(nb_pkts < RTE_IXGBE_VPMD_RX_BURST))
- return 0;
+ nb_pkts = RTE_ALIGN_FLOOR(nb_pkts, RTE_IXGBE_DESCS_PER_LOOP);
/* Just the act of getting into the function from the application is
* going to cost about 7 cycles */
@@ -310,7 +307,7 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts,
* D. fill info. from desc to mbuf
*/
#endif /* RTE_NEXT_ABI */
- for (pos = 0, nb_pkts_recd = 0; pos < RTE_IXGBE_VPMD_RX_BURST;
+ for (pos = 0, nb_pkts_recd = 0; pos < nb_pkts;
pos += RTE_IXGBE_DESCS_PER_LOOP,
rxdp += RTE_IXGBE_DESCS_PER_LOOP) {
__m128i descs[RTE_IXGBE_DESCS_PER_LOOP];
@@ -450,13 +447,11 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts,
}
/*
- * vPMD receive routine, now only accept (nb_pkts == RTE_IXGBE_VPMD_RX_BURST)
- * in one loop
+ * vPMD receive routine
*
* Notice:
- * - nb_pkts < RTE_IXGBE_VPMD_RX_BURST, just return no packet
- * - nb_pkts > RTE_IXGBE_VPMD_RX_BURST, only scan RTE_IXGBE_VPMD_RX_BURST
- * numbers of DD bit
+ * - floor align nb_pkts to a RTE_IXGBE_DESC_PER_LOOP power-of-two
+ * - 'nb_pkts < 4' causes 0 packet receiving
* - don't support ol_flags for rss and csum err
*/
uint16_t
@@ -470,12 +465,11 @@ static inline uint16_t
reassemble_packets(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_bufs,
uint16_t nb_bufs, uint8_t *split_flags)
{
- struct rte_mbuf *pkts[RTE_IXGBE_VPMD_RX_BURST]; /*finished pkts*/
+ struct rte_mbuf *pkts[nb_bufs]; /*finished pkts*/
struct rte_mbuf *start = rxq->pkt_first_seg;
struct rte_mbuf *end = rxq->pkt_last_seg;
unsigned pkt_idx, buf_idx;
-
for (buf_idx = 0, pkt_idx = 0; buf_idx < nb_bufs; buf_idx++) {
if (end != NULL) {
/* processing a split packet */
@@ -535,14 +529,17 @@ reassemble_packets(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_bufs,
*
* Notice:
* - don't support ol_flags for rss and csum err
- * - now only accept (nb_pkts == RTE_IXGBE_VPMD_RX_BURST)
+ * - will floor align nb_pkts to a RTE_IXGBE_DESC_PER_LOOP power-of-two
+ * - 'nb_pkts < 4' causes 0 packet receiving
*/
uint16_t
ixgbe_recv_scattered_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
uint16_t nb_pkts)
{
struct ixgbe_rx_queue *rxq = rx_queue;
- uint8_t split_flags[RTE_IXGBE_VPMD_RX_BURST] = {0};
+ uint8_t split_flags[nb_pkts];
+
+ memset(split_flags, 0, nb_pkts);
/* get some new buffers */
uint16_t nb_bufs = _recv_raw_pkts_vec(rxq, rx_pkts, nb_pkts,
@@ -667,8 +664,8 @@ ixgbe_xmit_pkts_vec(void *tx_queue, struct rte_mbuf **tx_pkts,
uint64_t rs = IXGBE_ADVTXD_DCMD_RS|DCMD_DTYP_FLAGS;
int i;
- if (unlikely(nb_pkts > RTE_IXGBE_VPMD_TX_BURST))
- nb_pkts = RTE_IXGBE_VPMD_TX_BURST;
+ /* cross rx_thresh boundary is not allowed */
+ nb_pkts = RTE_MIN(nb_pkts, txq->tx_rs_thresh);
if (txq->nb_tx_free < txq->tx_free_thresh)
ixgbe_tx_free_bufs(txq);
--
2.4.3
next reply other threads:[~2015-07-31 8:17 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-31 8:17 Cunming Liang [this message]
2015-07-31 9:21 ` Ananyev, Konstantin
2015-07-31 10:03 ` Zoltan Kiss
2015-07-31 10:21 ` Ananyev, Konstantin
2015-07-31 11:57 ` Zoltan Kiss
2015-07-31 14:49 ` Zoltan Kiss
2015-08-03 7:41 ` Liang, Cunming
2015-08-03 9:59 ` Liang, Cunming
2015-08-03 2:40 ` Liang, Cunming
2015-08-04 7:32 ` [dpdk-dev] [PATCH v2] " Cunming Liang
2015-08-04 9:02 ` Zoltan Kiss
2015-08-04 11:15 ` Liang, Cunming
2015-08-04 11:47 ` [dpdk-dev] [PATCH v3] " Cunming Liang
2015-08-04 16:26 ` Zoltan Kiss
2015-08-05 6:28 ` Liang, Cunming
2015-08-05 15:59 ` Zoltan Kiss
2015-08-05 9:31 ` Ananyev, Konstantin
2015-09-09 13:16 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438330669-25942-1-git-send-email-cunming.liang@intel.com \
--to=cunming.liang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).