From: Thomas Monjalon <thomas.monjalon@6wind.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 1/9] ethdev: remove Rx interrupt switch
Date: Tue, 1 Sep 2015 23:30:54 +0200 [thread overview]
Message-ID: <1441143062-2557-1-git-send-email-thomas.monjalon@6wind.com> (raw)
In-Reply-To: <1441138697-25157-1-git-send-email-thomas.monjalon@6wind.com>
The Rx interrupt feature is now part of the standard ABI.
Because of changes in rte_intr_handle and struct rte_eth_conf,
the eal and ethdev library versions are bumped.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
---
doc/guides/rel_notes/deprecation.rst | 4 --
drivers/net/e1000/igb_ethdev.c | 26 -----------
drivers/net/ixgbe/ixgbe_ethdev.c | 40 ----------------
examples/l3fwd-power/main.c | 2 -
lib/librte_eal/bsdapp/eal/Makefile | 2 +-
.../bsdapp/eal/include/exec-env/rte_interrupts.h | 2 -
lib/librte_eal/linuxapp/eal/Makefile | 2 +-
lib/librte_eal/linuxapp/eal/eal_interrupts.c | 53 ----------------------
.../linuxapp/eal/include/exec-env/rte_interrupts.h | 2 -
lib/librte_ether/Makefile | 2 +-
lib/librte_ether/rte_ethdev.c | 40 ----------------
lib/librte_ether/rte_ethdev.h | 4 --
12 files changed, 3 insertions(+), 176 deletions(-)
diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst
index da17880..991a777 100644
--- a/doc/guides/rel_notes/deprecation.rst
+++ b/doc/guides/rel_notes/deprecation.rst
@@ -13,10 +13,6 @@ Deprecation Notices
There is no backward compatibility planned from release 2.2.
All binaries will need to be rebuilt from release 2.2.
-* ABI changes are planned for struct rte_intr_handle, struct rte_eth_conf
- and struct eth_dev_ops to support interrupt mode feature from release 2.1.
- Those changes may be enabled in the release 2.1 with CONFIG_RTE_NEXT_ABI.
-
* The EAL function rte_eal_pci_close_one is deprecated because renamed to
rte_eal_pci_detach.
diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c
index c7e6d55..848ef6e 100644
--- a/drivers/net/e1000/igb_ethdev.c
+++ b/drivers/net/e1000/igb_ethdev.c
@@ -106,9 +106,7 @@ static int eth_igb_flow_ctrl_get(struct rte_eth_dev *dev,
static int eth_igb_flow_ctrl_set(struct rte_eth_dev *dev,
struct rte_eth_fc_conf *fc_conf);
static int eth_igb_lsc_interrupt_setup(struct rte_eth_dev *dev);
-#ifdef RTE_NEXT_ABI
static int eth_igb_rxq_interrupt_setup(struct rte_eth_dev *dev);
-#endif
static int eth_igb_interrupt_get_status(struct rte_eth_dev *dev);
static int eth_igb_interrupt_action(struct rte_eth_dev *dev);
static void eth_igb_interrupt_handler(struct rte_intr_handle *handle,
@@ -232,7 +230,6 @@ static int igb_timesync_read_rx_timestamp(struct rte_eth_dev *dev,
uint32_t flags);
static int igb_timesync_read_tx_timestamp(struct rte_eth_dev *dev,
struct timespec *timestamp);
-#ifdef RTE_NEXT_ABI
static int eth_igb_rx_queue_intr_enable(struct rte_eth_dev *dev,
uint16_t queue_id);
static int eth_igb_rx_queue_intr_disable(struct rte_eth_dev *dev,
@@ -241,7 +238,6 @@ static void eth_igb_assign_msix_vector(struct e1000_hw *hw, int8_t direction,
uint8_t queue, uint8_t msix_vector);
static void eth_igb_write_ivar(struct e1000_hw *hw, uint8_t msix_vector,
uint8_t index, uint8_t offset);
-#endif
static void eth_igb_configure_msix_intr(struct rte_eth_dev *dev);
/*
@@ -303,10 +299,8 @@ static const struct eth_dev_ops eth_igb_ops = {
.vlan_tpid_set = eth_igb_vlan_tpid_set,
.vlan_offload_set = eth_igb_vlan_offload_set,
.rx_queue_setup = eth_igb_rx_queue_setup,
-#ifdef RTE_NEXT_ABI
.rx_queue_intr_enable = eth_igb_rx_queue_intr_enable,
.rx_queue_intr_disable = eth_igb_rx_queue_intr_disable,
-#endif
.rx_queue_release = eth_igb_rx_queue_release,
.rx_queue_count = eth_igb_rx_queue_count,
.rx_descriptor_done = eth_igb_rx_descriptor_done,
@@ -893,9 +887,7 @@ eth_igb_start(struct rte_eth_dev *dev)
E1000_DEV_PRIVATE(dev->data->dev_private);
struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
int ret, mask;
-#ifdef RTE_NEXT_ABI
uint32_t intr_vector = 0;
-#endif
uint32_t ctrl_ext;
PMD_INIT_FUNC_TRACE();
@@ -936,7 +928,6 @@ eth_igb_start(struct rte_eth_dev *dev)
/* configure PF module if SRIOV enabled */
igb_pf_host_configure(dev);
-#ifdef RTE_NEXT_ABI
/* check and configure queue intr-vector mapping */
if (dev->data->dev_conf.intr_conf.rxq != 0)
intr_vector = dev->data->nb_rx_queues;
@@ -954,7 +945,6 @@ eth_igb_start(struct rte_eth_dev *dev)
return -ENOMEM;
}
}
-#endif
/* confiugre msix for rx interrupt */
eth_igb_configure_msix_intr(dev);
@@ -1050,11 +1040,9 @@ eth_igb_start(struct rte_eth_dev *dev)
" no intr multiplex\n");
}
-#ifdef RTE_NEXT_ABI
/* check if rxq interrupt is enabled */
if (dev->data->dev_conf.intr_conf.rxq != 0)
eth_igb_rxq_interrupt_setup(dev);
-#endif
/* enable uio/vfio intr/eventfd mapping */
rte_intr_enable(intr_handle);
@@ -1146,14 +1134,12 @@ eth_igb_stop(struct rte_eth_dev *dev)
}
filter_info->twotuple_mask = 0;
-#ifdef RTE_NEXT_ABI
/* Clean datapath event and queue/vec mapping */
rte_intr_efd_disable(intr_handle);
if (intr_handle->intr_vec != NULL) {
rte_free(intr_handle->intr_vec);
intr_handle->intr_vec = NULL;
}
-#endif
}
static void
@@ -1163,9 +1149,7 @@ eth_igb_close(struct rte_eth_dev *dev)
struct e1000_adapter *adapter =
E1000_DEV_PRIVATE(dev->data->dev_private);
struct rte_eth_link link;
-#ifdef RTE_NEXT_ABI
struct rte_pci_device *pci_dev;
-#endif
eth_igb_stop(dev);
adapter->stopped = 1;
@@ -1185,13 +1169,11 @@ eth_igb_close(struct rte_eth_dev *dev)
igb_dev_free_queues(dev);
-#ifdef RTE_NEXT_ABI
pci_dev = dev->pci_dev;
if (pci_dev->intr_handle.intr_vec) {
rte_free(pci_dev->intr_handle.intr_vec);
pci_dev->intr_handle.intr_vec = NULL;
}
-#endif
memset(&link, 0, sizeof(link));
rte_igb_dev_atomic_write_link_status(dev, &link);
@@ -2017,7 +1999,6 @@ eth_igb_lsc_interrupt_setup(struct rte_eth_dev *dev)
return 0;
}
-#ifdef RTE_NEXT_ABI
/* It clears the interrupt causes and enables the interrupt.
* It will be called once only during nic initialized.
*
@@ -2044,7 +2025,6 @@ static int eth_igb_rxq_interrupt_setup(struct rte_eth_dev *dev)
return 0;
}
-#endif
/*
* It reads ICR and gets interrupt causes, check it and set a bit flag
@@ -4144,7 +4124,6 @@ static struct rte_driver pmd_igbvf_drv = {
.init = rte_igbvf_pmd_init,
};
-#ifdef RTE_NEXT_ABI
static int
eth_igb_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id)
{
@@ -4219,7 +4198,6 @@ eth_igb_assign_msix_vector(struct e1000_hw *hw, int8_t direction,
8 * direction);
}
}
-#endif
/* Sets up the hardware to generate MSI-X interrupts properly
* @hw
@@ -4228,13 +4206,11 @@ eth_igb_assign_msix_vector(struct e1000_hw *hw, int8_t direction,
static void
eth_igb_configure_msix_intr(struct rte_eth_dev *dev)
{
-#ifdef RTE_NEXT_ABI
int queue_id;
uint32_t tmpval, regval, intr_mask;
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t vec = 0;
-#endif
struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
/* won't configure msix register if no mapping is done
@@ -4243,7 +4219,6 @@ eth_igb_configure_msix_intr(struct rte_eth_dev *dev)
if (!rte_intr_dp_is_en(intr_handle))
return;
-#ifdef RTE_NEXT_ABI
/* set interrupt vector for other causes */
if (hw->mac.type == e1000_82575) {
tmpval = E1000_READ_REG(hw, E1000_CTRL_EXT);
@@ -4299,7 +4274,6 @@ eth_igb_configure_msix_intr(struct rte_eth_dev *dev)
}
E1000_WRITE_FLUSH(hw);
-#endif
}
PMD_REGISTER_DRIVER(pmd_igb_drv);
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index b8ee1e9..ec2918c 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -190,9 +190,7 @@ static int ixgbe_dev_rss_reta_query(struct rte_eth_dev *dev,
uint16_t reta_size);
static void ixgbe_dev_link_status_print(struct rte_eth_dev *dev);
static int ixgbe_dev_lsc_interrupt_setup(struct rte_eth_dev *dev);
-#ifdef RTE_NEXT_ABI
static int ixgbe_dev_rxq_interrupt_setup(struct rte_eth_dev *dev);
-#endif
static int ixgbe_dev_interrupt_get_status(struct rte_eth_dev *dev);
static int ixgbe_dev_interrupt_action(struct rte_eth_dev *dev);
static void ixgbe_dev_interrupt_handler(struct rte_intr_handle *handle,
@@ -227,14 +225,12 @@ static void ixgbevf_vlan_offload_set(struct rte_eth_dev *dev, int mask);
static void ixgbevf_set_vfta_all(struct rte_eth_dev *dev, bool on);
static void ixgbevf_dev_interrupt_handler(struct rte_intr_handle *handle,
void *param);
-#ifdef RTE_NEXT_ABI
static int ixgbevf_dev_rx_queue_intr_enable(struct rte_eth_dev *dev,
uint16_t queue_id);
static int ixgbevf_dev_rx_queue_intr_disable(struct rte_eth_dev *dev,
uint16_t queue_id);
static void ixgbevf_set_ivar_map(struct ixgbe_hw *hw, int8_t direction,
uint8_t queue, uint8_t msix_vector);
-#endif
static void ixgbevf_configure_msix(struct rte_eth_dev *dev);
/* For Eth VMDQ APIs support */
@@ -252,14 +248,12 @@ static int ixgbe_mirror_rule_set(struct rte_eth_dev *dev,
uint8_t rule_id, uint8_t on);
static int ixgbe_mirror_rule_reset(struct rte_eth_dev *dev,
uint8_t rule_id);
-#ifdef RTE_NEXT_ABI
static int ixgbe_dev_rx_queue_intr_enable(struct rte_eth_dev *dev,
uint16_t queue_id);
static int ixgbe_dev_rx_queue_intr_disable(struct rte_eth_dev *dev,
uint16_t queue_id);
static void ixgbe_set_ivar_map(struct ixgbe_hw *hw, int8_t direction,
uint8_t queue, uint8_t msix_vector);
-#endif
static void ixgbe_configure_msix(struct rte_eth_dev *dev);
static int ixgbe_set_queue_rate_limit(struct rte_eth_dev *dev,
@@ -420,10 +414,8 @@ static const struct eth_dev_ops ixgbe_eth_dev_ops = {
.tx_queue_start = ixgbe_dev_tx_queue_start,
.tx_queue_stop = ixgbe_dev_tx_queue_stop,
.rx_queue_setup = ixgbe_dev_rx_queue_setup,
-#ifdef RTE_NEXT_ABI
.rx_queue_intr_enable = ixgbe_dev_rx_queue_intr_enable,
.rx_queue_intr_disable = ixgbe_dev_rx_queue_intr_disable,
-#endif
.rx_queue_release = ixgbe_dev_rx_queue_release,
.rx_queue_count = ixgbe_dev_rx_queue_count,
.rx_descriptor_done = ixgbe_dev_rx_descriptor_done,
@@ -497,10 +489,8 @@ static const struct eth_dev_ops ixgbevf_eth_dev_ops = {
.rx_descriptor_done = ixgbe_dev_rx_descriptor_done,
.tx_queue_setup = ixgbe_dev_tx_queue_setup,
.tx_queue_release = ixgbe_dev_tx_queue_release,
-#ifdef RTE_NEXT_ABI
.rx_queue_intr_enable = ixgbevf_dev_rx_queue_intr_enable,
.rx_queue_intr_disable = ixgbevf_dev_rx_queue_intr_disable,
-#endif
.mac_addr_add = ixgbevf_add_mac_addr,
.mac_addr_remove = ixgbevf_remove_mac_addr,
.set_mc_addr_list = ixgbe_dev_set_mc_addr_list,
@@ -1680,9 +1670,7 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
struct ixgbe_vf_info *vfinfo =
*IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data->dev_private);
struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
-#ifdef RTE_NEXT_ABI
uint32_t intr_vector = 0;
-#endif
int err, link_up = 0, negotiate = 0;
uint32_t speed = 0;
int mask = 0;
@@ -1715,7 +1703,6 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
/* configure PF module if SRIOV enabled */
ixgbe_pf_host_configure(dev);
-#ifdef RTE_NEXT_ABI
/* check and configure queue intr-vector mapping */
if (dev->data->dev_conf.intr_conf.rxq != 0)
intr_vector = dev->data->nb_rx_queues;
@@ -1734,7 +1721,6 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
return -ENOMEM;
}
}
-#endif
/* confiugre msix for sleep until rx interrupt */
ixgbe_configure_msix(dev);
@@ -1827,11 +1813,9 @@ skip_link_setup:
" no intr multiplex\n");
}
-#ifdef RTE_NEXT_ABI
/* check if rxq interrupt is enabled */
if (dev->data->dev_conf.intr_conf.rxq != 0)
ixgbe_dev_rxq_interrupt_setup(dev);
-#endif
/* enable uio/vfio intr/eventfd mapping */
rte_intr_enable(intr_handle);
@@ -1942,14 +1926,12 @@ ixgbe_dev_stop(struct rte_eth_dev *dev)
memset(filter_info->fivetuple_mask, 0,
sizeof(uint32_t) * IXGBE_5TUPLE_ARRAY_SIZE);
-#ifdef RTE_NEXT_ABI
/* Clean datapath event and queue/vec mapping */
rte_intr_efd_disable(intr_handle);
if (intr_handle->intr_vec != NULL) {
rte_free(intr_handle->intr_vec);
intr_handle->intr_vec = NULL;
}
-#endif
}
/*
@@ -2623,7 +2605,6 @@ ixgbe_dev_lsc_interrupt_setup(struct rte_eth_dev *dev)
* - On success, zero.
* - On failure, a negative value.
*/
-#ifdef RTE_NEXT_ABI
static int
ixgbe_dev_rxq_interrupt_setup(struct rte_eth_dev *dev)
{
@@ -2634,7 +2615,6 @@ ixgbe_dev_rxq_interrupt_setup(struct rte_eth_dev *dev)
return 0;
}
-#endif
/*
* It reads ICR and sets flag (IXGBE_EICR_LSC) for the link_update.
@@ -3435,9 +3415,7 @@ ixgbevf_dev_start(struct rte_eth_dev *dev)
{
struct ixgbe_hw *hw =
IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-#ifdef RTE_NEXT_ABI
uint32_t intr_vector = 0;
-#endif
struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
int err, mask = 0;
@@ -3470,7 +3448,6 @@ ixgbevf_dev_start(struct rte_eth_dev *dev)
ixgbevf_dev_rxtx_start(dev);
-#ifdef RTE_NEXT_ABI
/* check and configure queue intr-vector mapping */
if (dev->data->dev_conf.intr_conf.rxq != 0)
intr_vector = dev->data->nb_rx_queues;
@@ -3488,7 +3465,6 @@ ixgbevf_dev_start(struct rte_eth_dev *dev)
return -ENOMEM;
}
}
-#endif
ixgbevf_configure_msix(dev);
if (dev->data->dev_conf.intr_conf.lsc != 0) {
@@ -3534,23 +3510,19 @@ ixgbevf_dev_stop(struct rte_eth_dev *dev)
/* disable intr eventfd mapping */
rte_intr_disable(intr_handle);
-#ifdef RTE_NEXT_ABI
/* Clean datapath event and queue/vec mapping */
rte_intr_efd_disable(intr_handle);
if (intr_handle->intr_vec != NULL) {
rte_free(intr_handle->intr_vec);
intr_handle->intr_vec = NULL;
}
-#endif
}
static void
ixgbevf_dev_close(struct rte_eth_dev *dev)
{
struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-#ifdef RTE_NEXT_ABI
struct rte_pci_device *pci_dev;
-#endif
PMD_INIT_FUNC_TRACE();
@@ -3563,13 +3535,11 @@ ixgbevf_dev_close(struct rte_eth_dev *dev)
/* reprogram the RAR[0] in case user changed it. */
ixgbe_set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
-#ifdef RTE_NEXT_ABI
pci_dev = dev->pci_dev;
if (pci_dev->intr_handle.intr_vec) {
rte_free(pci_dev->intr_handle.intr_vec);
pci_dev->intr_handle.intr_vec = NULL;
}
-#endif
}
static void ixgbevf_set_vfta_all(struct rte_eth_dev *dev, bool on)
@@ -4087,7 +4057,6 @@ ixgbe_mirror_rule_reset(struct rte_eth_dev *dev, uint8_t rule_id)
return 0;
}
-#ifdef RTE_NEXT_ABI
static int
ixgbevf_dev_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id)
{
@@ -4240,18 +4209,15 @@ ixgbe_set_ivar_map(struct ixgbe_hw *hw, int8_t direction,
}
}
}
-#endif
static void
ixgbevf_configure_msix(struct rte_eth_dev *dev)
{
struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
-#ifdef RTE_NEXT_ABI
struct ixgbe_hw *hw =
IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t q_idx;
uint32_t vector_idx = 0;
-#endif
/* won't configure msix register if no mapping is done
* between intr vector and event fd.
@@ -4259,7 +4225,6 @@ ixgbevf_configure_msix(struct rte_eth_dev *dev)
if (!rte_intr_dp_is_en(intr_handle))
return;
-#ifdef RTE_NEXT_ABI
/* Configure all RX queues of VF */
for (q_idx = 0; q_idx < dev->data->nb_rx_queues; q_idx++) {
/* Force all queue use vector 0,
@@ -4271,7 +4236,6 @@ ixgbevf_configure_msix(struct rte_eth_dev *dev)
/* Configure VF Rx queue ivar */
ixgbevf_set_ivar_map(hw, -1, 1, vector_idx);
-#endif
}
/**
@@ -4283,13 +4247,11 @@ static void
ixgbe_configure_msix(struct rte_eth_dev *dev)
{
struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
-#ifdef RTE_NEXT_ABI
struct ixgbe_hw *hw =
IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t queue_id, vec = 0;
uint32_t mask;
uint32_t gpie;
-#endif
/* won't configure msix register if no mapping is done
* between intr vector and event fd
@@ -4297,7 +4259,6 @@ ixgbe_configure_msix(struct rte_eth_dev *dev)
if (!rte_intr_dp_is_en(intr_handle))
return;
-#ifdef RTE_NEXT_ABI
/* setup GPIE for MSI-x mode */
gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
gpie |= IXGBE_GPIE_MSIX_MODE | IXGBE_GPIE_PBA_SUPPORT |
@@ -4347,7 +4308,6 @@ ixgbe_configure_msix(struct rte_eth_dev *dev)
IXGBE_EIMS_LSC);
IXGBE_WRITE_REG(hw, IXGBE_EIAC, mask);
-#endif
}
static int ixgbe_set_queue_rate_limit(struct rte_eth_dev *dev,
diff --git a/examples/l3fwd-power/main.c b/examples/l3fwd-power/main.c
index 2f205ea..086f29b 100644
--- a/examples/l3fwd-power/main.c
+++ b/examples/l3fwd-power/main.c
@@ -239,9 +239,7 @@ static struct rte_eth_conf port_conf = {
},
.intr_conf = {
.lsc = 1,
-#ifdef RTE_NEXT_ABI
.rxq = 1,
-#endif
},
};
diff --git a/lib/librte_eal/bsdapp/eal/Makefile b/lib/librte_eal/bsdapp/eal/Makefile
index a969435..a49dcec 100644
--- a/lib/librte_eal/bsdapp/eal/Makefile
+++ b/lib/librte_eal/bsdapp/eal/Makefile
@@ -44,7 +44,7 @@ CFLAGS += $(WERROR_FLAGS) -O3
EXPORT_MAP := rte_eal_version.map
-LIBABIVER := 1
+LIBABIVER := 2
# specific to linuxapp exec-env
SRCS-$(CONFIG_RTE_LIBRTE_EAL_BSDAPP) := eal.c
diff --git a/lib/librte_eal/bsdapp/eal/include/exec-env/rte_interrupts.h b/lib/librte_eal/bsdapp/eal/include/exec-env/rte_interrupts.h
index bffa902..88d4ae1 100644
--- a/lib/librte_eal/bsdapp/eal/include/exec-env/rte_interrupts.h
+++ b/lib/librte_eal/bsdapp/eal/include/exec-env/rte_interrupts.h
@@ -50,11 +50,9 @@ struct rte_intr_handle {
int fd; /**< file descriptor */
int uio_cfg_fd; /**< UIO config file descriptor */
enum rte_intr_handle_type type; /**< handle type */
-#ifdef RTE_NEXT_ABI
int max_intr; /**< max interrupt requested */
uint32_t nb_efd; /**< number of available efds */
int *intr_vec; /**< intr vector number array */
-#endif
};
/**
diff --git a/lib/librte_eal/linuxapp/eal/Makefile b/lib/librte_eal/linuxapp/eal/Makefile
index 376d275..d62196e 100644
--- a/lib/librte_eal/linuxapp/eal/Makefile
+++ b/lib/librte_eal/linuxapp/eal/Makefile
@@ -35,7 +35,7 @@ LIB = librte_eal.a
EXPORT_MAP := rte_eal_version.map
-LIBABIVER := 1
+LIBABIVER := 2
VPATH += $(RTE_SDK)/lib/librte_eal/common
diff --git a/lib/librte_eal/linuxapp/eal/eal_interrupts.c b/lib/librte_eal/linuxapp/eal/eal_interrupts.c
index 3f87875..66e1fe3 100644
--- a/lib/librte_eal/linuxapp/eal/eal_interrupts.c
+++ b/lib/librte_eal/linuxapp/eal/eal_interrupts.c
@@ -290,26 +290,18 @@ vfio_enable_msix(struct rte_intr_handle *intr_handle) {
irq_set = (struct vfio_irq_set *) irq_set_buf;
irq_set->argsz = len;
-#ifdef RTE_NEXT_ABI
if (!intr_handle->max_intr)
intr_handle->max_intr = 1;
else if (intr_handle->max_intr > RTE_MAX_RXTX_INTR_VEC_ID)
intr_handle->max_intr = RTE_MAX_RXTX_INTR_VEC_ID + 1;
irq_set->count = intr_handle->max_intr;
-#else
- irq_set->count = 1;
-#endif
irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER;
irq_set->index = VFIO_PCI_MSIX_IRQ_INDEX;
irq_set->start = 0;
fd_ptr = (int *) &irq_set->data;
-#ifdef RTE_NEXT_ABI
memcpy(fd_ptr, intr_handle->efds, sizeof(intr_handle->efds));
fd_ptr[intr_handle->max_intr - 1] = intr_handle->fd;
-#else
- fd_ptr[0] = intr_handle->fd;
-#endif
ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set);
@@ -886,7 +878,6 @@ rte_eal_intr_init(void)
return -ret;
}
-#ifdef RTE_NEXT_ABI
static void
eal_intr_proc_rxtx_intr(int fd, const struct rte_intr_handle *intr_handle)
{
@@ -929,7 +920,6 @@ eal_intr_proc_rxtx_intr(int fd, const struct rte_intr_handle *intr_handle)
return;
} while (1);
}
-#endif
static int
eal_epoll_process_event(struct epoll_event *evs, unsigned int n,
@@ -1068,7 +1058,6 @@ rte_epoll_ctl(int epfd, int op, int fd,
return 0;
}
-#ifdef RTE_NEXT_ABI
int
rte_intr_rx_ctl(struct rte_intr_handle *intr_handle, int epfd,
int op, unsigned int vec, void *data)
@@ -1192,45 +1181,3 @@ rte_intr_allow_others(struct rte_intr_handle *intr_handle)
{
return !!(intr_handle->max_intr - intr_handle->nb_efd);
}
-
-#else
-int
-rte_intr_rx_ctl(struct rte_intr_handle *intr_handle,
- int epfd, int op, unsigned int vec, void *data)
-{
- RTE_SET_USED(intr_handle);
- RTE_SET_USED(epfd);
- RTE_SET_USED(op);
- RTE_SET_USED(vec);
- RTE_SET_USED(data);
- return -ENOTSUP;
-}
-
-int
-rte_intr_efd_enable(struct rte_intr_handle *intr_handle, uint32_t nb_efd)
-{
- RTE_SET_USED(intr_handle);
- RTE_SET_USED(nb_efd);
- return 0;
-}
-
-void
-rte_intr_efd_disable(struct rte_intr_handle *intr_handle)
-{
- RTE_SET_USED(intr_handle);
-}
-
-int
-rte_intr_dp_is_en(struct rte_intr_handle *intr_handle)
-{
- RTE_SET_USED(intr_handle);
- return 0;
-}
-
-int
-rte_intr_allow_others(struct rte_intr_handle *intr_handle)
-{
- RTE_SET_USED(intr_handle);
- return 1;
-}
-#endif
diff --git a/lib/librte_eal/linuxapp/eal/include/exec-env/rte_interrupts.h b/lib/librte_eal/linuxapp/eal/include/exec-env/rte_interrupts.h
index b05f4c8..45071b7 100644
--- a/lib/librte_eal/linuxapp/eal/include/exec-env/rte_interrupts.h
+++ b/lib/librte_eal/linuxapp/eal/include/exec-env/rte_interrupts.h
@@ -86,14 +86,12 @@ struct rte_intr_handle {
};
int fd; /**< interrupt event file descriptor */
enum rte_intr_handle_type type; /**< handle type */
-#ifdef RTE_NEXT_ABI
uint32_t max_intr; /**< max interrupt requested */
uint32_t nb_efd; /**< number of available efd(event fd) */
int efds[RTE_MAX_RXTX_INTR_VEC_ID]; /**< intr vectors/efds mapping */
struct rte_epoll_event elist[RTE_MAX_RXTX_INTR_VEC_ID];
/**< intr vector epoll event */
int *intr_vec; /**< intr vector number array */
-#endif
};
#define RTE_EPOLL_PER_THREAD -1 /**< to hint using per thread epfd */
diff --git a/lib/librte_ether/Makefile b/lib/librte_ether/Makefile
index fc45a71..3e81a0e 100644
--- a/lib/librte_ether/Makefile
+++ b/lib/librte_ether/Makefile
@@ -41,7 +41,7 @@ CFLAGS += $(WERROR_FLAGS)
EXPORT_MAP := rte_ether_version.map
-LIBABIVER := 1
+LIBABIVER := 2
SRCS-y += rte_ethdev.c
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 6b2400c..b309309 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -3033,7 +3033,6 @@ _rte_eth_dev_callback_process(struct rte_eth_dev *dev,
rte_spinlock_unlock(&rte_eth_dev_cb_lock);
}
-#ifdef RTE_NEXT_ABI
int
rte_eth_dev_rx_intr_ctl(uint8_t port_id, int epfd, int op, void *data)
{
@@ -3139,45 +3138,6 @@ rte_eth_dev_rx_intr_disable(uint8_t port_id,
FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_intr_disable, -ENOTSUP);
return (*dev->dev_ops->rx_queue_intr_disable)(dev, queue_id);
}
-#else
-int
-rte_eth_dev_rx_intr_enable(uint8_t port_id, uint16_t queue_id)
-{
- RTE_SET_USED(port_id);
- RTE_SET_USED(queue_id);
- return -ENOTSUP;
-}
-
-int
-rte_eth_dev_rx_intr_disable(uint8_t port_id, uint16_t queue_id)
-{
- RTE_SET_USED(port_id);
- RTE_SET_USED(queue_id);
- return -ENOTSUP;
-}
-
-int
-rte_eth_dev_rx_intr_ctl(uint8_t port_id, int epfd, int op, void *data)
-{
- RTE_SET_USED(port_id);
- RTE_SET_USED(epfd);
- RTE_SET_USED(op);
- RTE_SET_USED(data);
- return -1;
-}
-
-int
-rte_eth_dev_rx_intr_ctl_q(uint8_t port_id, uint16_t queue_id,
- int epfd, int op, void *data)
-{
- RTE_SET_USED(port_id);
- RTE_SET_USED(queue_id);
- RTE_SET_USED(epfd);
- RTE_SET_USED(op);
- RTE_SET_USED(data);
- return -1;
-}
-#endif
#ifdef RTE_NIC_BYPASS
int rte_eth_dev_bypass_init(uint8_t port_id)
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 544afe0..fa06554 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -845,10 +845,8 @@ struct rte_eth_fdir {
struct rte_intr_conf {
/** enable/disable lsc interrupt. 0 (default) - disable, 1 enable */
uint16_t lsc;
-#ifdef RTE_NEXT_ABI
/** enable/disable rxq interrupt. 0 (default) - disable, 1 enable */
uint16_t rxq;
-#endif
};
/**
@@ -1392,12 +1390,10 @@ struct eth_dev_ops {
eth_queue_release_t rx_queue_release;/**< Release RX queue.*/
eth_rx_queue_count_t rx_queue_count; /**< Get Rx queue count. */
eth_rx_descriptor_done_t rx_descriptor_done; /**< Check rxd DD bit */
-#ifdef RTE_NEXT_ABI
/**< Enable Rx queue interrupt. */
eth_rx_enable_intr_t rx_queue_intr_enable;
/**< Disable Rx queue interrupt.*/
eth_rx_disable_intr_t rx_queue_intr_disable;
-#endif
eth_tx_queue_setup_t tx_queue_setup;/**< Set up device TX queue.*/
eth_queue_release_t tx_queue_release;/**< Release TX queue.*/
eth_dev_led_on_t dev_led_on; /**< Turn on LED. */
--
2.5.1
next prev parent reply other threads:[~2015-09-01 21:32 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-01 20:18 [dpdk-dev] [PATCH 0/9] clean deprecated code Thomas Monjalon
2015-09-01 21:30 ` Thomas Monjalon [this message]
2015-09-01 21:30 ` [dpdk-dev] [PATCH 2/9] mbuf: remove packet type from offload flags Thomas Monjalon
2015-09-01 21:30 ` [dpdk-dev] [PATCH 3/9] ethdev: remove SCTP flow entries switch Thomas Monjalon
2015-09-01 21:30 ` [dpdk-dev] [PATCH 4/9] eal: remove deprecated function Thomas Monjalon
2015-09-01 21:30 ` [dpdk-dev] [PATCH 5/9] mem: remove dummy malloc library Thomas Monjalon
2015-09-01 21:30 ` [dpdk-dev] [PATCH 6/9] lpm: remove deprecated field Thomas Monjalon
2015-09-01 21:31 ` [dpdk-dev] [PATCH 7/9] acl: remove old API Thomas Monjalon
2015-09-01 21:31 ` [dpdk-dev] [PATCH 8/9] kni: remove deprecated functions Thomas Monjalon
2015-09-01 21:31 ` [dpdk-dev] [PATCH 9/9] ring: " Thomas Monjalon
2015-09-01 22:10 ` [dpdk-dev] [PATCH 0/9] clean deprecated code Stephen Hemminger
2015-09-02 10:30 ` Neil Horman
2015-09-02 13:16 ` [dpdk-dev] [PATCH v2 00/10] " Thomas Monjalon
2015-09-02 13:16 ` [dpdk-dev] [PATCH v2 01/10] doc: init next release notes Thomas Monjalon
2015-09-03 15:39 ` Mcnamara, John
2015-09-03 15:44 ` Mcnamara, John
2015-09-04 7:50 ` Thomas Monjalon
2015-09-02 13:16 ` [dpdk-dev] [PATCH v2 02/10] ethdev: remove Rx interrupt switch Thomas Monjalon
2015-09-02 13:16 ` [dpdk-dev] [PATCH v2 03/10] mbuf: remove packet type from offload flags Thomas Monjalon
2015-09-02 13:16 ` [dpdk-dev] [PATCH v2 04/10] ethdev: remove SCTP flow entries switch Thomas Monjalon
2015-09-02 13:16 ` [dpdk-dev] [PATCH v2 05/10] eal: remove deprecated function Thomas Monjalon
2015-09-03 14:29 ` David Marchand
2015-09-02 13:16 ` [dpdk-dev] [PATCH v2 06/10] mem: remove dummy malloc library Thomas Monjalon
2015-09-02 13:16 ` [dpdk-dev] [PATCH v2 07/10] lpm: remove deprecated field Thomas Monjalon
2015-09-02 13:16 ` [dpdk-dev] [PATCH v2 08/10] acl: remove old API Thomas Monjalon
2015-09-02 15:59 ` Ananyev, Konstantin
2015-09-02 13:16 ` [dpdk-dev] [PATCH v2 09/10] kni: remove deprecated functions Thomas Monjalon
2015-09-02 13:16 ` [dpdk-dev] [PATCH v2 10/10] ring: " Thomas Monjalon
2015-09-04 7:50 ` [dpdk-dev] [PATCH v2 00/10] clean deprecated code Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1441143062-2557-1-git-send-email-thomas.monjalon@6wind.com \
--to=thomas.monjalon@6wind.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).