From: Jingjing Wu <jingjing.wu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 14/52] i40e/base: Add Debug Dump Internal Data AQ command
Date: Sun, 6 Sep 2015 15:11:28 +0800 [thread overview]
Message-ID: <1441523526-26202-15-git-send-email-jingjing.wu@intel.com> (raw)
In-Reply-To: <1441523526-26202-1-git-send-email-jingjing.wu@intel.com>
This patch adds support for "Debug Dump Internal Data" AQ command.
It is used to dump internal firmware or hardware data for debug
purposes.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
---
drivers/net/i40e/base/i40e_common.c | 57 ++++++++++++++++++++++++++++++++++
drivers/net/i40e/base/i40e_prototype.h | 5 +++
2 files changed, 62 insertions(+)
diff --git a/drivers/net/i40e/base/i40e_common.c b/drivers/net/i40e/base/i40e_common.c
index c21beba..3617f01 100644
--- a/drivers/net/i40e/base/i40e_common.c
+++ b/drivers/net/i40e/base/i40e_common.c
@@ -5264,6 +5264,63 @@ void i40e_set_pci_config_data(struct i40e_hw *hw, u16 link_status)
}
/**
+ * i40e_aq_debug_dump
+ * @hw: pointer to the hardware structure
+ * @cluster_id: specific cluster to dump
+ * @table_id: table id within cluster
+ * @start_index: index of line in the block to read
+ * @buff_size: dump buffer size
+ * @buff: dump buffer
+ * @ret_buff_size: actual buffer size returned
+ * @ret_next_table: next block to read
+ * @ret_next_index: next index to read
+ *
+ * Dump internal FW/HW data for debug purposes.
+ *
+ **/
+enum i40e_status_code i40e_aq_debug_dump(struct i40e_hw *hw, u8 cluster_id,
+ u8 table_id, u32 start_index, u16 buff_size,
+ void *buff, u16 *ret_buff_size,
+ u8 *ret_next_table, u32 *ret_next_index,
+ struct i40e_asq_cmd_details *cmd_details)
+{
+ struct i40e_aq_desc desc;
+ struct i40e_aqc_debug_dump_internals *cmd =
+ (struct i40e_aqc_debug_dump_internals *)&desc.params.raw;
+ struct i40e_aqc_debug_dump_internals *resp =
+ (struct i40e_aqc_debug_dump_internals *)&desc.params.raw;
+ enum i40e_status_code status;
+
+ if (buff_size == 0 || !buff)
+ return I40E_ERR_PARAM;
+
+ i40e_fill_default_direct_cmd_desc(&desc,
+ i40e_aqc_opc_debug_dump_internals);
+ /* Indirect Command */
+ desc.flags |= CPU_TO_LE16((u16)I40E_AQ_FLAG_BUF);
+ if (buff_size > I40E_AQ_LARGE_BUF)
+ desc.flags |= CPU_TO_LE16((u16)I40E_AQ_FLAG_LB);
+
+ cmd->cluster_id = cluster_id;
+ cmd->table_id = table_id;
+ cmd->idx = CPU_TO_LE32(start_index);
+
+ desc.datalen = CPU_TO_LE16(buff_size);
+
+ status = i40e_asq_send_command(hw, &desc, buff, buff_size, cmd_details);
+ if (!status) {
+ if (ret_buff_size != NULL)
+ *ret_buff_size = LE16_TO_CPU(desc.datalen);
+ if (ret_next_table != NULL)
+ *ret_next_table = resp->table_id;
+ if (ret_next_index != NULL)
+ *ret_next_index = LE32_TO_CPU(resp->idx);
+ }
+
+ return status;
+}
+
+/**
* i40e_read_bw_from_alt_ram
* @hw: pointer to the hardware structure
* @max_bw: pointer for max_bw read
diff --git a/drivers/net/i40e/base/i40e_prototype.h b/drivers/net/i40e/base/i40e_prototype.h
index 139ff19..eadbebe 100644
--- a/drivers/net/i40e/base/i40e_prototype.h
+++ b/drivers/net/i40e/base/i40e_prototype.h
@@ -459,6 +459,11 @@ enum i40e_status_code i40e_aq_add_rem_control_packet_filter(struct i40e_hw *hw,
u16 vsi_seid, u16 queue, bool is_add,
struct i40e_control_filter_stats *stats,
struct i40e_asq_cmd_details *cmd_details);
+enum i40e_status_code i40e_aq_debug_dump(struct i40e_hw *hw, u8 cluster_id,
+ u8 table_id, u32 start_index, u16 buff_size,
+ void *buff, u16 *ret_buff_size,
+ u8 *ret_next_table, u32 *ret_next_index,
+ struct i40e_asq_cmd_details *cmd_details);
void i40e_add_filter_to_drop_tx_flow_control_frames(struct i40e_hw *hw,
u16 vsi_seid);
#endif /* _I40E_PROTOTYPE_H_ */
--
2.4.0
next prev parent reply other threads:[~2015-09-06 7:12 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-06 7:11 [dpdk-dev] [PATCH 00/52] update i40e base driver Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 01/52] i40e/base: split device ids into a separate file Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 02/52] i40e/base: Add new device id for 20Gb and Fort pond device Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 03/52] i40e/base: add error status value decoding Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 04/52] i40e/base: Replace sprintf with i40e_debug Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 05/52] i40e/base: Merge Fortville SW 4 admin Q command header Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 06/52] i40e/base: Add module_types and update_link_info Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 07/52] i40e/base: grab the AQ spinlocks before clearing registers Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 08/52] i40e/base: add handling of writeback descriptor Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 09/52] i40e/base: Add info to nvm info struct for OEM version data Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 10/52] i40e/base: add wait states to NVM state machine Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 11/52] i40e/base: add commands to nvmupdate utility Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 12/52] i40e/base: Add promiscuous on VLAN support Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 13/52] i40e/base: Add a workaround to drop all flow control frames Jingjing Wu
2015-09-06 7:11 ` Jingjing Wu [this message]
2015-09-06 7:11 ` [dpdk-dev] [PATCH 15/52] i40e/base: OEM Post Update AQ command implementation Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 16/52] i40e/base: add VF capabilities to virtual channel interface Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 17/52] i40e/base: create new BIT and BIT_ULL macros Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 18/52] i40e/base: Add parsing for CEE DCBX TLVs Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 19/52] i40e/base: Prepare the local LLDP MIB in IEEE TLV Format Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 20/52] i40e/base: Refactor PHY structure and add phy_capabilities enum Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 21/52] i40e/base: Store CEE DCBX cfg from firmware and Cache the CEE TLV status Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 22/52] i40e/base: Add some more stats for FD SB and ATR status Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 23/52] i40e/base: Update Flex-10 related device/function capabilities Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 24/52] i40e/base: Wrap the register definitions for PF and VF driver Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 25/52] i40e/base: fix up type clash in i40e_aq_rc_to_posix conversion Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 26/52] i40e/base: Add new link status defines Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 27/52] i40e/base: fixup padding issue in get_cee_dcb_cfg_v1_resp Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 28/52] i40e/base: Add Tx Scheduling related AQ commands Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 29/52] i40e/base: Additional checks for CEE APP priority validity Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 30/52] i40e/base: Add support for pre-allocated pages for pd Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 31/52] i40e/base: clean up unneeded gotos Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 32/52] i40e/base: Handle admin Q timeout when releasing NVM Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 33/52] i40e/base: Add definition of GLINT_CTL register Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 34/52] i40e/base: Add virtchnl op for additional solaris config Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 35/52] i40e/base: drop func from debug print Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 36/52] i40e/base: add new X722 device Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 37/52] i40e/base: Add AQ functions to handle RSS Key and LUT programming Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 38/52] i40e/base: add proxy config admin q functions Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 39/52] i40e/base: add wol config admin queue functions Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 40/52] i40e/base: add WR_CSR_PROT wol/proxy capability parsing Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 41/52] i40e/base: FortPark has additional PCTYPES supported for RSS Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 42/52] i40e/base: FortPark changes to Rx and Tx descriptor for Outer UDP checksum offloads Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 43/52] i40e/base: use INLINE macro for better cross-platform code management Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 44/52] i40e/base: ESS Support Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 45/52] i40e/base: print FCoE capability reported by the device function Jingjing Wu
2015-09-06 7:12 ` [dpdk-dev] [PATCH 46/52] i40e/base: remove useless assignments Jingjing Wu
2015-09-06 7:12 ` [dpdk-dev] [PATCH 47/52] i40e/base: Increase pf reset max loop limit Jingjing Wu
2015-09-06 7:12 ` [dpdk-dev] [PATCH 48/52] i40e/base: Add FortPark specific registers Jingjing Wu
2015-09-06 7:12 ` [dpdk-dev] [PATCH 49/52] i40e/base: Allow for per-device FW API version Jingjing Wu
2015-09-06 7:12 ` [dpdk-dev] [PATCH 50/52] i40e/base: Add ATR command bit definition for FortPark Jingjing Wu
2015-09-06 7:12 ` [dpdk-dev] [PATCH 51/52] i40e/base: Explicitly assign enum index for VSI type Jingjing Wu
2015-09-06 7:12 ` [dpdk-dev] [PATCH 52/52] eal/common: add new i40e device id Jingjing Wu
2015-09-09 1:53 ` [dpdk-dev] [PATCH 00/52] update i40e base driver Zhang, Helin
2015-10-01 23:38 ` Thomas Monjalon
2015-10-02 8:24 ` Mcnamara, John
2015-10-08 2:46 ` Wu, Jingjing
2015-09-16 7:45 ` Xu, HuilongX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1441523526-26202-15-git-send-email-jingjing.wu@intel.com \
--to=jingjing.wu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).