From: Jingjing Wu <jingjing.wu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 39/52] i40e/base: add wol config admin queue functions
Date: Sun, 6 Sep 2015 15:11:53 +0800 [thread overview]
Message-ID: <1441523526-26202-40-git-send-email-jingjing.wu@intel.com> (raw)
In-Reply-To: <1441523526-26202-1-git-send-email-jingjing.wu@intel.com>
Adds admin q function for "Set Wake on LAN Filter AQ"
and "Get Wake Up Reason AQ".
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
---
drivers/net/i40e/base/i40e_adminq_cmd.h | 47 ++++++++++++++++++
drivers/net/i40e/base/i40e_common.c | 87 +++++++++++++++++++++++++++++++++
drivers/net/i40e/base/i40e_prototype.h | 9 ++++
3 files changed, 143 insertions(+)
diff --git a/drivers/net/i40e/base/i40e_adminq_cmd.h b/drivers/net/i40e/base/i40e_adminq_cmd.h
index c072ef8..1874653 100644
--- a/drivers/net/i40e/base/i40e_adminq_cmd.h
+++ b/drivers/net/i40e/base/i40e_adminq_cmd.h
@@ -270,6 +270,10 @@ enum i40e_admin_queue_opc {
i40e_aqc_opc_set_rss_lut = 0x0B03,
i40e_aqc_opc_get_rss_key = 0x0B04,
i40e_aqc_opc_get_rss_lut = 0x0B05,
+
+ /* WoL commands */
+ i40e_aqc_opc_set_wol_filter = 0x0120,
+ i40e_aqc_opc_get_wake_reason = 0x0121,
#endif
/* Proxy commands */
@@ -2458,5 +2462,48 @@ struct i40e_aqc_set_ns_proxy_table_entry_resp {
I40E_CHECK_CMD_LENGTH(i40e_aqc_set_ns_proxy_table_entry_resp);
+struct i40e_aqc_set_wol_filter {
+ __le16 filter_index;
+#define I40E_AQC_MAX_NUM_WOL_FILTERS 8
+ __le16 cmd_flags;
+#define I40E_AQC_SET_WOL_FILTER 0x8000
+#define I40E_AQC_SET_WOL_FILTER_NO_TCO_WOL 0x4000
+ __le16 valid_flags;
+#define I40E_AQC_SET_WOL_FILTER_ACTION_VALID 0x8000
+#define I40E_AQC_SET_WOL_FILTER_NO_TCO_ACTION_VALID 0x4000
+ u8 reserved[2];
+ __le32 address_high;
+ __le32 address_low;
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_set_wol_filter);
+
+struct i40e_aqc_set_wol_filter_resp {
+ u8 reserved[8];
+ __le32 address_high;
+ __le32 address_low;
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_set_wol_filter_resp);
+
+struct i40e_aqc_get_wol_wake_reason {
+ u8 reserved[16];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_get_wol_wake_reason);
+
+struct i40e_aqc_get_wake_reason_completion {
+ u8 reserved_1[2];
+ __le16 wake_reason;
+ u8 reserved_2[12];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_get_wake_reason_completion);
+
+struct i40e_aqc_set_wol_filter_data {
+ u8 filter[128];
+ u8 mask[16];
+};
+
#endif
#endif /* _I40E_ADMINQ_CMD_H_ */
diff --git a/drivers/net/i40e/base/i40e_common.c b/drivers/net/i40e/base/i40e_common.c
index 92b2ae8..fe86096 100644
--- a/drivers/net/i40e/base/i40e_common.c
+++ b/drivers/net/i40e/base/i40e_common.c
@@ -5836,4 +5836,91 @@ enum i40e_status_code i40e_aq_set_ns_proxy_table_entry(struct i40e_hw *hw,
return status;
}
+/**
+ * i40e_aq_set_clear_wol_filter
+ * @hw: pointer to the hw struct
+ * @filter_index: index of filter to modify (0-7)
+ * @filter: buffer containing filter to be set
+ * @set_filter: true to set filter, false to clear filter
+ * @no_wol_tco: if true, pass through packets cannot cause wake-up
+ * if false, pass through packets may cause wake-up
+ * @filter_valid: true if filter action is valid
+ * @no_wol_tco_valid: true if no WoL in TCO traffic action valid
+ * @cmd_details: pointer to command details structure or NULL
+ *
+ * Set or clear WoL filter for port attached to the PF
+ **/
+enum i40e_status_code i40e_aq_set_clear_wol_filter(struct i40e_hw *hw,
+ u8 filter_index,
+ struct i40e_aqc_set_wol_filter_data *filter,
+ bool set_filter, bool no_wol_tco,
+ bool filter_valid, bool no_wol_tco_valid,
+ struct i40e_asq_cmd_details *cmd_details)
+{
+ struct i40e_aq_desc desc;
+ struct i40e_aqc_set_wol_filter *cmd =
+ (struct i40e_aqc_set_wol_filter *)&desc.params.raw;
+ enum i40e_status_code status;
+ u16 cmd_flags = 0;
+ u16 valid_flags = 0;
+ u16 buff_len = 0;
+
+ i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_set_wol_filter);
+
+ if (filter_index >= I40E_AQC_MAX_NUM_WOL_FILTERS)
+ return I40E_ERR_PARAM;
+ cmd->filter_index = CPU_TO_LE16(filter_index);
+
+ if (set_filter) {
+ if (!filter)
+ return I40E_ERR_PARAM;
+ cmd_flags |= I40E_AQC_SET_WOL_FILTER;
+ buff_len = sizeof(*filter);
+ }
+ if (no_wol_tco)
+ cmd_flags |= I40E_AQC_SET_WOL_FILTER_NO_TCO_WOL;
+ cmd->cmd_flags = CPU_TO_LE16(cmd_flags);
+
+ if (filter_valid)
+ valid_flags |= I40E_AQC_SET_WOL_FILTER_ACTION_VALID;
+ if (no_wol_tco_valid)
+ valid_flags |= I40E_AQC_SET_WOL_FILTER_NO_TCO_ACTION_VALID;
+ cmd->valid_flags = CPU_TO_LE16(valid_flags);
+
+ cmd->address_high = CPU_TO_LE32(I40E_HI_DWORD((u64)filter));
+ cmd->address_low = CPU_TO_LE32(I40E_LO_DWORD((u64)filter));
+
+ status = i40e_asq_send_command(hw, &desc, filter,
+ buff_len, cmd_details);
+
+ return status;
+}
+
+/**
+ * i40e_aq_get_wake_event_reason
+ * @hw: pointer to the hw struct
+ * @wake_reason: return value, index of matching filter
+ * @cmd_details: pointer to command details structure or NULL
+ *
+ * Get information for the reason of a Wake Up event
+ **/
+enum i40e_status_code i40e_aq_get_wake_event_reason(struct i40e_hw *hw,
+ u16 *wake_reason,
+ struct i40e_asq_cmd_details *cmd_details)
+{
+ struct i40e_aq_desc desc;
+ struct i40e_aqc_get_wake_reason_completion *resp =
+ (struct i40e_aqc_get_wake_reason_completion *)&desc.params.raw;
+ enum i40e_status_code status;
+
+ i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_get_wake_reason);
+
+ status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
+
+ if (status == I40E_SUCCESS)
+ *wake_reason = LE16_TO_CPU(resp->wake_reason);
+
+ return status;
+}
+
#endif /* X722_SUPPORT */
diff --git a/drivers/net/i40e/base/i40e_prototype.h b/drivers/net/i40e/base/i40e_prototype.h
index 0ba5c4a..76dc5b6 100644
--- a/drivers/net/i40e/base/i40e_prototype.h
+++ b/drivers/net/i40e/base/i40e_prototype.h
@@ -498,5 +498,14 @@ enum i40e_status_code i40e_aq_set_arp_proxy_config(struct i40e_hw *hw,
enum i40e_status_code i40e_aq_set_ns_proxy_table_entry(struct i40e_hw *hw,
struct i40e_aqc_ns_proxy_data *ns_proxy_table_entry,
struct i40e_asq_cmd_details *cmd_details);
+enum i40e_status_code i40e_aq_set_clear_wol_filter(struct i40e_hw *hw,
+ u8 filter_index,
+ struct i40e_aqc_set_wol_filter_data *filter,
+ bool set_filter, bool no_wol_tco,
+ bool filter_valid, bool no_wol_tco_valid,
+ struct i40e_asq_cmd_details *cmd_details);
+enum i40e_status_code i40e_aq_get_wake_event_reason(struct i40e_hw *hw,
+ u16 *wake_reason,
+ struct i40e_asq_cmd_details *cmd_details);
#endif
#endif /* _I40E_PROTOTYPE_H_ */
--
2.4.0
next prev parent reply other threads:[~2015-09-06 7:13 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-06 7:11 [dpdk-dev] [PATCH 00/52] update i40e base driver Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 01/52] i40e/base: split device ids into a separate file Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 02/52] i40e/base: Add new device id for 20Gb and Fort pond device Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 03/52] i40e/base: add error status value decoding Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 04/52] i40e/base: Replace sprintf with i40e_debug Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 05/52] i40e/base: Merge Fortville SW 4 admin Q command header Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 06/52] i40e/base: Add module_types and update_link_info Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 07/52] i40e/base: grab the AQ spinlocks before clearing registers Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 08/52] i40e/base: add handling of writeback descriptor Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 09/52] i40e/base: Add info to nvm info struct for OEM version data Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 10/52] i40e/base: add wait states to NVM state machine Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 11/52] i40e/base: add commands to nvmupdate utility Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 12/52] i40e/base: Add promiscuous on VLAN support Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 13/52] i40e/base: Add a workaround to drop all flow control frames Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 14/52] i40e/base: Add Debug Dump Internal Data AQ command Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 15/52] i40e/base: OEM Post Update AQ command implementation Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 16/52] i40e/base: add VF capabilities to virtual channel interface Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 17/52] i40e/base: create new BIT and BIT_ULL macros Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 18/52] i40e/base: Add parsing for CEE DCBX TLVs Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 19/52] i40e/base: Prepare the local LLDP MIB in IEEE TLV Format Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 20/52] i40e/base: Refactor PHY structure and add phy_capabilities enum Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 21/52] i40e/base: Store CEE DCBX cfg from firmware and Cache the CEE TLV status Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 22/52] i40e/base: Add some more stats for FD SB and ATR status Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 23/52] i40e/base: Update Flex-10 related device/function capabilities Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 24/52] i40e/base: Wrap the register definitions for PF and VF driver Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 25/52] i40e/base: fix up type clash in i40e_aq_rc_to_posix conversion Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 26/52] i40e/base: Add new link status defines Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 27/52] i40e/base: fixup padding issue in get_cee_dcb_cfg_v1_resp Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 28/52] i40e/base: Add Tx Scheduling related AQ commands Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 29/52] i40e/base: Additional checks for CEE APP priority validity Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 30/52] i40e/base: Add support for pre-allocated pages for pd Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 31/52] i40e/base: clean up unneeded gotos Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 32/52] i40e/base: Handle admin Q timeout when releasing NVM Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 33/52] i40e/base: Add definition of GLINT_CTL register Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 34/52] i40e/base: Add virtchnl op for additional solaris config Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 35/52] i40e/base: drop func from debug print Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 36/52] i40e/base: add new X722 device Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 37/52] i40e/base: Add AQ functions to handle RSS Key and LUT programming Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 38/52] i40e/base: add proxy config admin q functions Jingjing Wu
2015-09-06 7:11 ` Jingjing Wu [this message]
2015-09-06 7:11 ` [dpdk-dev] [PATCH 40/52] i40e/base: add WR_CSR_PROT wol/proxy capability parsing Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 41/52] i40e/base: FortPark has additional PCTYPES supported for RSS Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 42/52] i40e/base: FortPark changes to Rx and Tx descriptor for Outer UDP checksum offloads Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 43/52] i40e/base: use INLINE macro for better cross-platform code management Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 44/52] i40e/base: ESS Support Jingjing Wu
2015-09-06 7:11 ` [dpdk-dev] [PATCH 45/52] i40e/base: print FCoE capability reported by the device function Jingjing Wu
2015-09-06 7:12 ` [dpdk-dev] [PATCH 46/52] i40e/base: remove useless assignments Jingjing Wu
2015-09-06 7:12 ` [dpdk-dev] [PATCH 47/52] i40e/base: Increase pf reset max loop limit Jingjing Wu
2015-09-06 7:12 ` [dpdk-dev] [PATCH 48/52] i40e/base: Add FortPark specific registers Jingjing Wu
2015-09-06 7:12 ` [dpdk-dev] [PATCH 49/52] i40e/base: Allow for per-device FW API version Jingjing Wu
2015-09-06 7:12 ` [dpdk-dev] [PATCH 50/52] i40e/base: Add ATR command bit definition for FortPark Jingjing Wu
2015-09-06 7:12 ` [dpdk-dev] [PATCH 51/52] i40e/base: Explicitly assign enum index for VSI type Jingjing Wu
2015-09-06 7:12 ` [dpdk-dev] [PATCH 52/52] eal/common: add new i40e device id Jingjing Wu
2015-09-09 1:53 ` [dpdk-dev] [PATCH 00/52] update i40e base driver Zhang, Helin
2015-10-01 23:38 ` Thomas Monjalon
2015-10-02 8:24 ` Mcnamara, John
2015-10-08 2:46 ` Wu, Jingjing
2015-09-16 7:45 ` Xu, HuilongX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1441523526-26202-40-git-send-email-jingjing.wu@intel.com \
--to=jingjing.wu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).