From: Yuanhan Liu <yuanhan.liu@linux.intel.com>
To: dev@dpdk.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Subject: [dpdk-dev] [PATCH v5 resend 05/12] vhost: add VHOST_USER_SET_VRING_ENABLE message
Date: Fri, 18 Sep 2015 23:10:54 +0800 [thread overview]
Message-ID: <1442589061-19225-6-git-send-email-yuanhan.liu@linux.intel.com> (raw)
In-Reply-To: <1442589061-19225-1-git-send-email-yuanhan.liu@linux.intel.com>
From: Changchun Ouyang <changchun.ouyang@intel.com>
This message is used to enable/disable a specific vring queue pair.
The first queue pair is enabled by default.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
---
lib/librte_vhost/rte_virtio_net.h | 1 +
lib/librte_vhost/vhost_rxtx.c | 10 ++++++++++
lib/librte_vhost/vhost_user/vhost-net-user.c | 5 +++++
lib/librte_vhost/vhost_user/vhost-net-user.h | 1 +
lib/librte_vhost/vhost_user/virtio-net-user.c | 22 ++++++++++++++++++++++
lib/librte_vhost/vhost_user/virtio-net-user.h | 3 +++
lib/librte_vhost/virtio-net.c | 12 +++++++++---
7 files changed, 51 insertions(+), 3 deletions(-)
diff --git a/lib/librte_vhost/rte_virtio_net.h b/lib/librte_vhost/rte_virtio_net.h
index 5dd6493..08b69df 100644
--- a/lib/librte_vhost/rte_virtio_net.h
+++ b/lib/librte_vhost/rte_virtio_net.h
@@ -89,6 +89,7 @@ struct vhost_virtqueue {
volatile uint16_t last_used_idx_res; /**< Used for multiple devices reserving buffers. */
int callfd; /**< Used to notify the guest (trigger interrupt). */
int kickfd; /**< Currently unused as polling mode is enabled. */
+ int enabled;
struct buf_vector buf_vec[BUF_VECTOR_MAX]; /**< for scatter RX. */
} __rte_cache_aligned;
diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
index a4ab6ca..aa9ccda 100644
--- a/lib/librte_vhost/vhost_rxtx.c
+++ b/lib/librte_vhost/vhost_rxtx.c
@@ -86,6 +86,9 @@ virtio_dev_rx(struct virtio_net *dev, uint16_t queue_id,
}
vq = dev->virtqueue[queue_id];
+ if (unlikely(vq->enabled == 0))
+ return 0;
+
count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
/*
@@ -278,6 +281,7 @@ copy_from_mbuf_to_vring(struct virtio_net *dev, uint32_t queue_id,
* (guest physical addr -> vhost virtual addr)
*/
vq = dev->virtqueue[queue_id];
+
vb_addr = gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
vb_hdr_addr = vb_addr;
@@ -485,6 +489,9 @@ virtio_dev_merge_rx(struct virtio_net *dev, uint16_t queue_id,
}
vq = dev->virtqueue[queue_id];
+ if (unlikely(vq->enabled == 0))
+ return 0;
+
count = RTE_MIN((uint32_t)MAX_PKT_BURST, count);
if (count == 0)
@@ -583,6 +590,9 @@ rte_vhost_dequeue_burst(struct virtio_net *dev, uint16_t queue_id,
}
vq = dev->virtqueue[queue_id];
+ if (unlikely(vq->enabled == 0))
+ return 0;
+
avail_idx = *((volatile uint16_t *)&vq->avail->idx);
/* If there are no available buffers then return. */
diff --git a/lib/librte_vhost/vhost_user/vhost-net-user.c b/lib/librte_vhost/vhost_user/vhost-net-user.c
index 8675cd4..f681676 100644
--- a/lib/librte_vhost/vhost_user/vhost-net-user.c
+++ b/lib/librte_vhost/vhost_user/vhost-net-user.c
@@ -99,6 +99,7 @@ static const char *vhost_message_str[VHOST_USER_MAX] = {
[VHOST_USER_GET_PROTOCOL_FEATURES] = "VHOST_USER_GET_PROTOCOL_FEATURES",
[VHOST_USER_SET_PROTOCOL_FEATURES] = "VHOST_USER_SET_PROTOCOL_FEATURES",
[VHOST_USER_GET_QUEUE_NUM] = "VHOST_USER_GET_QUEUE_NUM",
+ [VHOST_USER_SET_VRING_ENABLE] = "VHOST_USER_SET_VRING_ENABLE",
};
/**
@@ -428,6 +429,10 @@ vserver_message_handler(int connfd, void *dat, int *remove)
send_vhost_message(connfd, &msg);
break;
+ case VHOST_USER_SET_VRING_ENABLE:
+ user_set_vring_enable(ctx, &msg.payload.state);
+ break;
+
default:
break;
diff --git a/lib/librte_vhost/vhost_user/vhost-net-user.h b/lib/librte_vhost/vhost_user/vhost-net-user.h
index 389d21d..38637cc 100644
--- a/lib/librte_vhost/vhost_user/vhost-net-user.h
+++ b/lib/librte_vhost/vhost_user/vhost-net-user.h
@@ -66,6 +66,7 @@ typedef enum VhostUserRequest {
VHOST_USER_GET_PROTOCOL_FEATURES = 15,
VHOST_USER_SET_PROTOCOL_FEATURES = 16,
VHOST_USER_GET_QUEUE_NUM = 17,
+ VHOST_USER_SET_VRING_ENABLE = 18,
VHOST_USER_MAX
} VhostUserRequest;
diff --git a/lib/librte_vhost/vhost_user/virtio-net-user.c b/lib/librte_vhost/vhost_user/virtio-net-user.c
index e83d279..9871f20 100644
--- a/lib/librte_vhost/vhost_user/virtio-net-user.c
+++ b/lib/librte_vhost/vhost_user/virtio-net-user.c
@@ -306,6 +306,28 @@ user_get_vring_base(struct vhost_device_ctx ctx,
return 0;
}
+/*
+ * when virtio queues are ready to work, qemu will send us to
+ * enable the virtio queue pair.
+ */
+int
+user_set_vring_enable(struct vhost_device_ctx ctx,
+ struct vhost_vring_state *state)
+{
+ struct virtio_net *dev = get_device(ctx);
+ uint32_t base_idx = state->index;
+ int enabled = (int)state->num;
+
+ RTE_LOG(INFO, VHOST_CONFIG,
+ "set queue enable: %d to qp idx: %d\n",
+ enabled, state->index);
+
+ dev->virtqueue[base_idx + VIRTIO_RXQ]->enabled = enabled;
+ dev->virtqueue[base_idx + VIRTIO_TXQ]->enabled = enabled;
+
+ return 0;
+}
+
void
user_destroy_device(struct vhost_device_ctx ctx)
{
diff --git a/lib/librte_vhost/vhost_user/virtio-net-user.h b/lib/librte_vhost/vhost_user/virtio-net-user.h
index e7a6ff4..d46057e 100644
--- a/lib/librte_vhost/vhost_user/virtio-net-user.h
+++ b/lib/librte_vhost/vhost_user/virtio-net-user.h
@@ -50,5 +50,8 @@ void user_set_protocol_features(struct vhost_device_ctx ctx,
int user_get_vring_base(struct vhost_device_ctx, struct vhost_vring_state *);
+int user_set_vring_enable(struct vhost_device_ctx ctx,
+ struct vhost_vring_state *state);
+
void user_destroy_device(struct vhost_device_ctx);
#endif
diff --git a/lib/librte_vhost/virtio-net.c b/lib/librte_vhost/virtio-net.c
index 643a92e..5fe1ad6 100644
--- a/lib/librte_vhost/virtio-net.c
+++ b/lib/librte_vhost/virtio-net.c
@@ -254,7 +254,7 @@ rm_config_ll_entry(struct virtio_net_config_ll *ll_dev,
}
static void
-init_vring_queue(struct vhost_virtqueue *vq)
+init_vring_queue(struct vhost_virtqueue *vq, int qp_idx)
{
memset(vq, 0, sizeof(struct vhost_virtqueue));
@@ -263,13 +263,19 @@ init_vring_queue(struct vhost_virtqueue *vq)
/* Backends are set to -1 indicating an inactive device. */
vq->backend = -1;
+
+ /* always set the default vq pair to enabled */
+ if (qp_idx == 0)
+ vq->enabled = 1;
}
static void
init_vring_queue_pair(struct virtio_net *dev, uint32_t qp_idx)
{
- init_vring_queue(dev->virtqueue[qp_idx * VIRTIO_QNUM + VIRTIO_RXQ]);
- init_vring_queue(dev->virtqueue[qp_idx * VIRTIO_QNUM + VIRTIO_TXQ]);
+ uint32_t base_idx = qp_idx * VIRTIO_QNUM;
+
+ init_vring_queue(dev->virtqueue[base_idx + VIRTIO_RXQ], qp_idx);
+ init_vring_queue(dev->virtqueue[base_idx + VIRTIO_TXQ], qp_idx);
}
static int
--
1.9.0
next prev parent reply other threads:[~2015-09-18 15:09 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-18 15:10 [dpdk-dev] [PATCH v5 resend 00/12] vhost-user multiple queues enabling Yuanhan Liu
2015-09-18 15:10 ` [dpdk-dev] [PATCH v5 resend 01/12] vhost-user: add protocol features support Yuanhan Liu
2015-09-18 15:10 ` [dpdk-dev] [PATCH v5 resend 02/12] vhost-user: add VHOST_USER_GET_QUEUE_NUM message Yuanhan Liu
2015-09-18 15:10 ` [dpdk-dev] [PATCH v5 resend 03/12] vhost: vring queue setup for multiple queue support Yuanhan Liu
2015-09-20 13:58 ` Marcel Apfelbaum
2015-09-21 2:06 ` Yuanhan Liu
2015-09-21 17:56 ` Marcel Apfelbaum
2015-09-22 7:31 ` Yuanhan Liu
2015-09-22 8:10 ` Marcel Apfelbaum
2015-09-22 8:34 ` Yuanhan Liu
2015-09-22 8:47 ` Marcel Apfelbaum
2015-09-22 9:21 ` Yuanhan Liu
2015-09-22 10:06 ` Marcel Apfelbaum
2015-09-22 14:22 ` Yuanhan Liu
2015-09-22 14:51 ` Marcel Apfelbaum
2015-09-23 3:46 ` Yuanhan Liu
2015-09-24 9:51 ` Marcel Apfelbaum
2015-09-21 9:07 ` Michael S. Tsirkin
2015-09-18 15:10 ` [dpdk-dev] [PATCH v5 resend 04/12] vhost: rxtx: prepare work " Yuanhan Liu
2015-09-20 9:29 ` Michael S. Tsirkin
2015-09-21 2:25 ` Yuanhan Liu
2015-09-21 9:04 ` Michael S. Tsirkin
2015-09-22 2:54 ` Yuanhan Liu
2015-09-18 15:10 ` Yuanhan Liu [this message]
2015-09-20 9:37 ` [dpdk-dev] [PATCH v5 resend 05/12] vhost: add VHOST_USER_SET_VRING_ENABLE message Michael S. Tsirkin
2015-09-21 2:22 ` Yuanhan Liu
2015-09-21 9:02 ` Michael S. Tsirkin
2015-09-22 2:21 ` Yuanhan Liu
2015-09-23 8:43 ` Yuanhan Liu
2015-09-18 15:10 ` [dpdk-dev] [PATCH v5 resend 06/12] vhost-user: handle VHOST_USER_RESET_OWNER correctly Yuanhan Liu
2015-09-18 15:10 ` [dpdk-dev] [PATCH v5 resend 07/12] virtio: resolve for control queue Yuanhan Liu
2015-09-20 9:21 ` Michael S. Tsirkin
2015-09-21 6:36 ` Yuanhan Liu
2015-10-08 15:32 ` Nikita Kalyazin
2015-10-08 20:51 ` Steffen Bauch
2015-10-09 7:11 ` Nikita Kalyazin
2015-10-12 8:39 ` Yuanhan Liu
2015-10-12 9:31 ` Xie, Huawei
2015-10-12 9:56 ` Xie, Huawei
2015-10-12 20:58 ` Steffen Bauch
2015-10-13 9:54 ` Yuanhan Liu
2015-09-18 15:10 ` [dpdk-dev] [PATCH v5 resend 08/12] vhost-user: enable vhost-user multiple queue Yuanhan Liu
2015-09-18 15:10 ` [dpdk-dev] [PATCH v5 resend 09/12] vhost: add API bind a virtq to a specific core Yuanhan Liu
2015-09-18 15:10 ` [dpdk-dev] [PATCH v5 resend 10/12] ixgbe: support VMDq RSS in non-SRIOV environment Yuanhan Liu
2015-09-18 15:11 ` [dpdk-dev] [PATCH v5 resend 11/12] examples/vhost: demonstrate the usage of vhost mq feature Yuanhan Liu
2015-09-18 15:11 ` [dpdk-dev] [PATCH v5 resend 12/12] examples/vhost: add per queue stats Yuanhan Liu
2015-09-20 11:48 ` [dpdk-dev] [PATCH v5 resend 00/12] vhost-user multiple queues enabling Marcel Apfelbaum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442589061-19225-6-git-send-email-yuanhan.liu@linux.intel.com \
--to=yuanhan.liu@linux.intel.com \
--cc=dev@dpdk.org \
--cc=mst@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).