From: Wang Xiao W <xiao.w.wang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH] fm10k: enable TSO support
Date: Fri, 25 Sep 2015 16:09:10 +0800 [thread overview]
Message-ID: <1443168550-6648-1-git-send-email-xiao.w.wang@intel.com> (raw)
This patch enables fm10k TSO feature for both non-tunneling packet
and tunneling packet.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
---
drivers/net/fm10k/base/fm10k_osdep.h | 5 +++++
drivers/net/fm10k/fm10k_ethdev.c | 3 ++-
drivers/net/fm10k/fm10k_rxtx.c | 21 ++++++++++++++++++---
3 files changed, 25 insertions(+), 4 deletions(-)
diff --git a/drivers/net/fm10k/base/fm10k_osdep.h b/drivers/net/fm10k/base/fm10k_osdep.h
index 53c433c..a1bfa09 100644
--- a/drivers/net/fm10k/base/fm10k_osdep.h
+++ b/drivers/net/fm10k/base/fm10k_osdep.h
@@ -145,4 +145,9 @@ typedef int bool;
#define fm10k_read_reg FM10K_READ_REG
#endif
+#define FM10K_TSO_MINMSS \
+ (FM10K_DMA_CTRL_MINMSS_64 >> FM10K_DMA_CTRL_MINMSS_SHIFT)
+#define FM10K_TSO_MIN_HEADERLEN 54
+#define FM10K_TSO_MAX_HEADERLEN 192
+
#endif /* _FM10K_OSDEP_H_ */
diff --git a/drivers/net/fm10k/fm10k_ethdev.c b/drivers/net/fm10k/fm10k_ethdev.c
index a69c990..b104fc2 100644
--- a/drivers/net/fm10k/fm10k_ethdev.c
+++ b/drivers/net/fm10k/fm10k_ethdev.c
@@ -937,7 +937,8 @@ fm10k_dev_infos_get(struct rte_eth_dev *dev,
DEV_TX_OFFLOAD_VLAN_INSERT |
DEV_TX_OFFLOAD_IPV4_CKSUM |
DEV_TX_OFFLOAD_UDP_CKSUM |
- DEV_TX_OFFLOAD_TCP_CKSUM;
+ DEV_TX_OFFLOAD_TCP_CKSUM |
+ DEV_TX_OFFLOAD_TCP_TSO;
dev_info->hash_key_size = FM10K_RSSRK_SIZE * sizeof(uint32_t);
dev_info->reta_size = FM10K_MAX_RSS_INDICES;
diff --git a/drivers/net/fm10k/fm10k_rxtx.c b/drivers/net/fm10k/fm10k_rxtx.c
index b5fa2e6..aed3e92 100644
--- a/drivers/net/fm10k/fm10k_rxtx.c
+++ b/drivers/net/fm10k/fm10k_rxtx.c
@@ -410,7 +410,7 @@ static inline void tx_free_descriptors(struct fm10k_tx_queue *q)
static inline void tx_xmit_pkt(struct fm10k_tx_queue *q, struct rte_mbuf *mb)
{
uint16_t last_id;
- uint8_t flags;
+ uint8_t flags, hdrlen;
/* always set the LAST flag on the last descriptor used to
* transmit the packet */
@@ -435,7 +435,7 @@ static inline void tx_xmit_pkt(struct fm10k_tx_queue *q, struct rte_mbuf *mb)
/* set checksum flags on first descriptor of packet. SCTP checksum
* offload is not supported, but we do not explicitly check for this
* case in favor of greatly simplified processing. */
- if (mb->ol_flags & (PKT_TX_IP_CKSUM | PKT_TX_L4_MASK))
+ if (mb->ol_flags & (PKT_TX_IP_CKSUM | PKT_TX_L4_MASK | PKT_TX_TCP_SEG))
q->hw_ring[q->next_free].flags |= FM10K_TXD_FLAG_CSUM;
/* set vlan if requested */
@@ -447,6 +447,21 @@ static inline void tx_xmit_pkt(struct fm10k_tx_queue *q, struct rte_mbuf *mb)
rte_cpu_to_le_64(MBUF_DMA_ADDR(mb));
q->hw_ring[q->next_free].buflen =
rte_cpu_to_le_16(rte_pktmbuf_data_len(mb));
+
+ if (mb->ol_flags & PKT_TX_TCP_SEG) {
+ hdrlen = mb->outer_l2_len + mb->outer_l3_len + mb->l2_len +
+ mb->l3_len + mb->l4_len;
+ if (q->hw_ring[q->next_free].flags & FM10K_TXD_FLAG_FTAG)
+ hdrlen += sizeof(struct fm10k_ftag);
+
+ if ((hdrlen >= FM10K_TSO_MIN_HEADERLEN) &&
+ (hdrlen <= FM10K_TSO_MAX_HEADERLEN) &&
+ (mb->tso_segsz >= FM10K_TSO_MINMSS)) {
+ q->hw_ring[q->next_free].mss = mb->tso_segsz;
+ q->hw_ring[q->next_free].hdrlen = hdrlen;
+ }
+ }
+
if (++q->next_free == q->nb_desc)
q->next_free = 0;
@@ -462,7 +477,7 @@ static inline void tx_xmit_pkt(struct fm10k_tx_queue *q, struct rte_mbuf *mb)
q->next_free = 0;
}
- q->hw_ring[last_id].flags = flags;
+ q->hw_ring[last_id].flags |= flags;
}
uint16_t
--
1.9.3
next reply other threads:[~2015-09-25 8:09 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-25 8:09 Wang Xiao W [this message]
2015-10-07 12:23 ` Thomas Monjalon
2015-10-12 6:37 ` [dpdk-dev] [PATCH v2 0/2] " Wang Xiao W
2015-10-12 6:37 ` [dpdk-dev] [PATCH v2 1/2] " Wang Xiao W
2015-10-13 8:35 ` Qiu, Michael
2015-10-12 6:37 ` [dpdk-dev] [PATCH v2 2/2] doc: update release note for fm10k " Wang Xiao W
2015-10-29 22:26 ` [dpdk-dev] [PATCH v2 0/2] fm10k: enable " Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443168550-6648-1-git-send-email-xiao.w.wang@intel.com \
--to=xiao.w.wang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).