[dpdk-dev] [PATCH 15/34] e1000/base: apply paranoia to macro arguments

[Wenzhuo Lu <wenzhuo.lu@intel.com>]

Macro arguments need to be in parens since we can pass in expressions.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
---
 drivers/net/e1000/base/e1000_api.h  | 16 ++++++++--------
 drivers/net/e1000/base/e1000_hw.h   |  2 +-
 drivers/net/e1000/base/e1000_regs.h |  4 ++--
 3 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/net/e1000/base/e1000_api.h b/drivers/net/e1000/base/e1000_api.h
index 563d0ca..0bc471d 100644
--- a/drivers/net/e1000/base/e1000_api.h
+++ b/drivers/net/e1000/base/e1000_api.h
@@ -124,14 +124,14 @@ u32  e1000_translate_register_82542(u32 reg);
  * TBI_ACCEPT macro definition:
  *
  * This macro requires:
- *      adapter = a pointer to struct e1000_hw
+ *      a = a pointer to struct e1000_hw
  *      status = the 8 bit status field of the Rx descriptor with EOP set
- *      error = the 8 bit error field of the Rx descriptor with EOP set
+ *      errors = the 8 bit error field of the Rx descriptor with EOP set
  *      length = the sum of all the length fields of the Rx descriptors that
  *               make up the current frame
  *      last_byte = the last byte of the frame DMAed by the hardware
- *      max_frame_length = the maximum frame length we want to accept.
- *      min_frame_length = the minimum frame length we want to accept.
+ *      min_frame_size = the minimum frame length we want to accept.
+ *      max_frame_size = the maximum frame length we want to accept.
  *
  * This macro is a conditional that should be used in the interrupt
  * handler's Rx processing routine when RxErrors have been detected.
@@ -157,10 +157,10 @@ u32  e1000_translate_register_82542(u32 reg);
 	 (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \
 	 ((last_byte) == CARRIER_EXTENSION) && \
 	 (((status) & E1000_RXD_STAT_VP) ? \
-	  (((length) > (min_frame_size - VLAN_TAG_SIZE)) && \
-	  ((length) <= (max_frame_size + 1))) : \
-	  (((length) > min_frame_size) && \
-	  ((length) <= (max_frame_size + VLAN_TAG_SIZE + 1)))))
+	  (((length) > ((min_frame_size) - VLAN_TAG_SIZE)) && \
+	  ((length) <= ((max_frame_size) + 1))) : \
+	  (((length) > (min_frame_size)) && \
+	  ((length) <= ((max_frame_size) + VLAN_TAG_SIZE + 1)))))
 
 #define E1000_MAX(a, b) ((a) > (b) ? (a) : (b))
 #define E1000_DIVIDE_ROUND_UP(a, b)	(((a) + (b) - 1) / (b)) /* ceil(a/b) */
diff --git a/drivers/net/e1000/base/e1000_hw.h b/drivers/net/e1000/base/e1000_hw.h
index f06be0c..fd48104 100644
--- a/drivers/net/e1000/base/e1000_hw.h
+++ b/drivers/net/e1000/base/e1000_hw.h
@@ -785,7 +785,7 @@ struct e1000_mac_info {
 	u16 uta_reg_count;
 
 	/* Maximum size of the MTA register table in all supported adapters */
-	#define MAX_MTA_REG 128
+#define MAX_MTA_REG 128
 	u32 mta_shadow[MAX_MTA_REG];
 	u16 rar_entry_count;
 
diff --git a/drivers/net/e1000/base/e1000_regs.h b/drivers/net/e1000/base/e1000_regs.h
index b9fcdea..2891da3 100644
--- a/drivers/net/e1000/base/e1000_regs.h
+++ b/drivers/net/e1000/base/e1000_regs.h
@@ -203,7 +203,7 @@ POSSIBILITY OF SUCH DAMAGE.
 /* Queues fetch arbitration priority control register */
 #define E1000_I210_TQAVARBCTRL			0x3574
 /* Queues priority masks where _n and _p can be 0-3. */
-#define E1000_TQAVARBCTRL_QUEUE_PRI(_n, _p)	((_p) << (2 * _n))
+#define E1000_TQAVARBCTRL_QUEUE_PRI(_n, _p)	((_p) << (2 * (_n)))
 /* QAV Tx mode control registers where _n can be 0 or 1. */
 #define E1000_I210_TQAVCC(_n)			(0x3004 + 0x40 * (_n))
 
@@ -216,7 +216,7 @@ POSSIBILITY OF SUCH DAMAGE.
 #define E1000_PQGPTC(_n)		(0x010014 + (0x100 * (_n)))
 
 /* Queues packet buffer size masks where _n can be 0-3 and _s 0-63 [kB] */
-#define E1000_I210_TXPBS_SIZE(_n, _s)	((_s) << (6 * _n))
+#define E1000_I210_TXPBS_SIZE(_n, _s)	((_s) << (6 * (_n)))
 
 #define E1000_MMDAC			13 /* MMD Access Control */
 #define E1000_MMDAAD			14 /* MMD Access Address/Data */
-- 
1.9.3