[dpdk-dev] [PATCH 05/34] e1000/base: redundant PHY power down for i210

[Wenzhuo Lu <wenzhuo.lu@intel.com>]

The wrong bit is being used in PHYREG16 for PHY power down. In addition,
the use of PHYREG 16 is unnecessary if bit 11 of PHYREG 0 is used.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
---
 drivers/net/e1000/base/e1000_phy.c | 15 ---------------
 drivers/net/e1000/base/e1000_phy.h |  1 -
 2 files changed, 16 deletions(-)

diff --git a/drivers/net/e1000/base/e1000_phy.c b/drivers/net/e1000/base/e1000_phy.c
index 7620ecf..6bbb379 100644
--- a/drivers/net/e1000/base/e1000_phy.c
+++ b/drivers/net/e1000/base/e1000_phy.c
@@ -3498,16 +3498,10 @@ STATIC s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 void e1000_power_up_phy_copper(struct e1000_hw *hw)
 {
 	u16 mii_reg = 0;
-	u16 power_reg = 0;
 
 	/* The PHY will retain its settings across a power down/up cycle */
 	hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
 	mii_reg &= ~MII_CR_POWER_DOWN;
-	if (hw->phy.type == e1000_phy_i210) {
-		hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg);
-		power_reg &= ~GS40G_CS_POWER_DOWN;
-		hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg);
-	}
 	hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
 }
 
@@ -3522,17 +3516,10 @@ void e1000_power_up_phy_copper(struct e1000_hw *hw)
 void e1000_power_down_phy_copper(struct e1000_hw *hw)
 {
 	u16 mii_reg = 0;
-	u16 power_reg = 0;
 
 	/* The PHY will retain its settings across a power down/up cycle */
 	hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
 	mii_reg |= MII_CR_POWER_DOWN;
-	/* i210 Phy requires an additional bit for power up/down */
-	if (hw->phy.type == e1000_phy_i210) {
-		hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg);
-		power_reg |= GS40G_CS_POWER_DOWN;
-		hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg);
-	}
 	hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
 	msec_delay(1);
 }
@@ -3563,7 +3550,6 @@ STATIC s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
 		if (ret_val)
 			return ret_val;
 	}
-
 	/* Page 800 works differently than the rest so it has its own func */
 	if (page == BM_WUC_PAGE) {
 		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
@@ -3673,7 +3659,6 @@ STATIC s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
 		if (ret_val)
 			return ret_val;
 	}
-
 	/* Page 800 works differently than the rest so it has its own func */
 	if (page == BM_WUC_PAGE) {
 		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
diff --git a/drivers/net/e1000/base/e1000_phy.h b/drivers/net/e1000/base/e1000_phy.h
index b30b36e..2b78af0 100644
--- a/drivers/net/e1000/base/e1000_phy.h
+++ b/drivers/net/e1000/base/e1000_phy.h
@@ -143,7 +143,6 @@ bool e1000_is_mphy_ready(struct e1000_hw *hw);
 #define GS40G_MAC_LB			0x4140
 #define GS40G_MAC_SPEED_1G		0X0006
 #define GS40G_COPPER_SPEC		0x0010
-#define GS40G_CS_POWER_DOWN		0x0002
 
 /* BM/HV Specific Registers */
 #define BM_PORT_CTRL_PAGE		769
-- 
1.9.3