From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 3/6] e1000: use rte_eth_dma_zone_reserve
Date: Thu, 22 Oct 2015 23:34:47 -0700 [thread overview]
Message-ID: <1445582090-5927-4-git-send-email-stephen@networkplumber.org> (raw)
In-Reply-To: <1445582090-5927-1-git-send-email-stephen@networkplumber.org>
Use common code to handle Xen support at runtime.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
drivers/net/e1000/em_rxtx.c | 38 ++++----------------------------------
drivers/net/e1000/igb_rxtx.c | 41 ++++++-----------------------------------
2 files changed, 10 insertions(+), 69 deletions(-)
diff --git a/drivers/net/e1000/em_rxtx.c b/drivers/net/e1000/em_rxtx.c
index 3b8776d..32e0953 100644
--- a/drivers/net/e1000/em_rxtx.c
+++ b/drivers/net/e1000/em_rxtx.c
@@ -1104,28 +1104,6 @@ eth_em_recv_scattered_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
#define EM_MAX_BUF_SIZE 16384
#define EM_RCTL_FLXBUF_STEP 1024
-static const struct rte_memzone *
-ring_dma_zone_reserve(struct rte_eth_dev *dev, const char *ring_name,
- uint16_t queue_id, uint32_t ring_size, int socket_id)
-{
- const struct rte_memzone *mz;
- char z_name[RTE_MEMZONE_NAMESIZE];
-
- snprintf(z_name, sizeof(z_name), "%s_%s_%d_%d",
- dev->driver->pci_drv.name, ring_name, dev->data->port_id,
- queue_id);
-
- if ((mz = rte_memzone_lookup(z_name)) != 0)
- return (mz);
-
-#ifdef RTE_LIBRTE_XEN_DOM0
- return rte_memzone_reserve_bounded(z_name, ring_size,
- socket_id, 0, RTE_CACHE_LINE_SIZE, RTE_PGSIZE_2M);
-#else
- return rte_memzone_reserve(z_name, ring_size, socket_id, 0);
-#endif
-}
-
static void
em_tx_queue_release_mbufs(struct em_tx_queue *txq)
{
@@ -1273,8 +1251,8 @@ eth_em_tx_queue_setup(struct rte_eth_dev *dev,
* resizing in later calls to the queue setup function.
*/
tsize = sizeof (txq->tx_ring[0]) * EM_MAX_RING_DESC;
- if ((tz = ring_dma_zone_reserve(dev, "tx_ring", queue_idx, tsize,
- socket_id)) == NULL)
+ if ((tz = rte_eth_dma_zone_reserve(dev, "tx_ring", queue_idx, tsize,
+ RTE_CACHE_LINE_SIZE, socket_id)) == NULL)
return (-ENOMEM);
/* Allocate the tx queue data structure. */
@@ -1300,11 +1278,7 @@ eth_em_tx_queue_setup(struct rte_eth_dev *dev,
txq->port_id = dev->data->port_id;
txq->tdt_reg_addr = E1000_PCI_REG_ADDR(hw, E1000_TDT(queue_idx));
-#ifndef RTE_LIBRTE_XEN_DOM0
- txq->tx_ring_phys_addr = (uint64_t) tz->phys_addr;
-#else
txq->tx_ring_phys_addr = rte_mem_phy2mch(tz->memseg_id, tz->phys_addr);
-#endif
txq->tx_ring = (struct e1000_data_desc *) tz->addr;
PMD_INIT_LOG(DEBUG, "sw_ring=%p hw_ring=%p dma_addr=0x%"PRIx64,
@@ -1400,8 +1374,8 @@ eth_em_rx_queue_setup(struct rte_eth_dev *dev,
/* Allocate RX ring for max possible mumber of hardware descriptors. */
rsize = sizeof (rxq->rx_ring[0]) * EM_MAX_RING_DESC;
- if ((rz = ring_dma_zone_reserve(dev, "rx_ring", queue_idx, rsize,
- socket_id)) == NULL)
+ if ((rz = rte_eth_dma_zone_reserve(dev, "rx_ring", queue_idx, rsize,
+ RTE_CACHE_LINE_SIZE, socket_id)) == NULL)
return (-ENOMEM);
/* Allocate the RX queue data structure. */
@@ -1430,11 +1404,7 @@ eth_em_rx_queue_setup(struct rte_eth_dev *dev,
rxq->rdt_reg_addr = E1000_PCI_REG_ADDR(hw, E1000_RDT(queue_idx));
rxq->rdh_reg_addr = E1000_PCI_REG_ADDR(hw, E1000_RDH(queue_idx));
-#ifndef RTE_LIBRTE_XEN_DOM0
- rxq->rx_ring_phys_addr = (uint64_t) rz->phys_addr;
-#else
rxq->rx_ring_phys_addr = rte_mem_phy2mch(rz->memseg_id, rz->phys_addr);
-#endif
rxq->rx_ring = (struct e1000_rx_desc *) rz->addr;
PMD_INIT_LOG(DEBUG, "sw_ring=%p hw_ring=%p dma_addr=0x%"PRIx64,
diff --git a/drivers/net/e1000/igb_rxtx.c b/drivers/net/e1000/igb_rxtx.c
index 19905fd..7a4bd5b 100644
--- a/drivers/net/e1000/igb_rxtx.c
+++ b/drivers/net/e1000/igb_rxtx.c
@@ -1167,29 +1167,6 @@ eth_igb_recv_scattered_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
#define IGB_MIN_RING_DESC 32
#define IGB_MAX_RING_DESC 4096
-static const struct rte_memzone *
-ring_dma_zone_reserve(struct rte_eth_dev *dev, const char *ring_name,
- uint16_t queue_id, uint32_t ring_size, int socket_id)
-{
- char z_name[RTE_MEMZONE_NAMESIZE];
- const struct rte_memzone *mz;
-
- snprintf(z_name, sizeof(z_name), "%s_%s_%d_%d",
- dev->driver->pci_drv.name, ring_name,
- dev->data->port_id, queue_id);
- mz = rte_memzone_lookup(z_name);
- if (mz)
- return mz;
-
-#ifdef RTE_LIBRTE_XEN_DOM0
- return rte_memzone_reserve_bounded(z_name, ring_size,
- socket_id, 0, IGB_ALIGN, RTE_PGSIZE_2M);
-#else
- return rte_memzone_reserve_aligned(z_name, ring_size,
- socket_id, 0, IGB_ALIGN);
-#endif
-}
-
static void
igb_tx_queue_release_mbufs(struct igb_tx_queue *txq)
{
@@ -1322,8 +1299,8 @@ eth_igb_tx_queue_setup(struct rte_eth_dev *dev,
* resizing in later calls to the queue setup function.
*/
size = sizeof(union e1000_adv_tx_desc) * IGB_MAX_RING_DESC;
- tz = ring_dma_zone_reserve(dev, "tx_ring", queue_idx,
- size, socket_id);
+ tz = rte_eth_dma_zone_reserve(dev, "tx_ring", queue_idx, size,
+ IGB_ALIGN, socket_id);
if (tz == NULL) {
igb_tx_queue_release(txq);
return (-ENOMEM);
@@ -1341,12 +1318,9 @@ eth_igb_tx_queue_setup(struct rte_eth_dev *dev,
txq->port_id = dev->data->port_id;
txq->tdt_reg_addr = E1000_PCI_REG_ADDR(hw, E1000_TDT(txq->reg_idx));
-#ifndef RTE_LIBRTE_XEN_DOM0
- txq->tx_ring_phys_addr = (uint64_t) tz->phys_addr;
-#else
txq->tx_ring_phys_addr = rte_mem_phy2mch(tz->memseg_id, tz->phys_addr);
-#endif
- txq->tx_ring = (union e1000_adv_tx_desc *) tz->addr;
+
+ txq->tx_ring = (union e1000_adv_tx_desc *) tz->addr;
/* Allocate software ring */
txq->sw_ring = rte_zmalloc("txq->sw_ring",
sizeof(struct igb_tx_entry) * nb_desc,
@@ -1470,18 +1444,15 @@ eth_igb_rx_queue_setup(struct rte_eth_dev *dev,
* resizing in later calls to the queue setup function.
*/
size = sizeof(union e1000_adv_rx_desc) * IGB_MAX_RING_DESC;
- rz = ring_dma_zone_reserve(dev, "rx_ring", queue_idx, size, socket_id);
+ rz = rte_eth_dma_zone_reserve(dev, "rx_ring", queue_idx, size,
+ IGB_ALIGN, socket_id);
if (rz == NULL) {
igb_rx_queue_release(rxq);
return (-ENOMEM);
}
rxq->rdt_reg_addr = E1000_PCI_REG_ADDR(hw, E1000_RDT(rxq->reg_idx));
rxq->rdh_reg_addr = E1000_PCI_REG_ADDR(hw, E1000_RDH(rxq->reg_idx));
-#ifndef RTE_LIBRTE_XEN_DOM0
- rxq->rx_ring_phys_addr = (uint64_t) rz->phys_addr;
-#else
rxq->rx_ring_phys_addr = rte_mem_phy2mch(rz->memseg_id, rz->phys_addr);
-#endif
rxq->rx_ring = (union e1000_adv_rx_desc *) rz->addr;
/* Allocate software ring. */
--
2.1.4
next prev parent reply other threads:[~2015-10-23 6:34 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-23 6:34 [dpdk-dev] [PATCH v2 0/6] Xen DOM0 runtime support Stephen Hemminger
2015-10-23 6:34 ` [dpdk-dev] [PATCH 1/6] xen: allow determining DOM0 at runtime Stephen Hemminger
2015-10-23 6:34 ` [dpdk-dev] [PATCH 2/6] ethdev: add common function for reserving DMA regions Stephen Hemminger
2015-10-23 6:34 ` Stephen Hemminger [this message]
2015-10-23 6:34 ` [dpdk-dev] [PATCH 4/6] ixgbe: use rte_eth_dma_zone_reserve Stephen Hemminger
2015-10-23 6:34 ` [dpdk-dev] [PATCH 5/6] i40e: " Stephen Hemminger
2015-10-23 6:34 ` [dpdk-dev] [PATCH 6/6] fm10k: " Stephen Hemminger
2015-10-26 7:24 ` [dpdk-dev] [PATCH v2 0/6] Xen DOM0 runtime support Liu, Jijiang
2015-11-03 0:40 ` Thomas Monjalon
-- strict thread matches above, loose matches on Subject: below --
2015-09-29 0:44 [dpdk-dev] [PATCH " Stephen Hemminger
2015-09-29 0:44 ` [dpdk-dev] [PATCH 3/6] e1000: use rte_eth_dma_zone_reserve Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445582090-5927-4-git-send-email-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).