From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 5/6] i40e: use rte_eth_dma_zone_reserve
Date: Thu, 22 Oct 2015 23:34:49 -0700 [thread overview]
Message-ID: <1445582090-5927-6-git-send-email-stephen@networkplumber.org> (raw)
In-Reply-To: <1445582090-5927-1-git-send-email-stephen@networkplumber.org>
Handle Xen support at runtime.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
drivers/net/i40e/i40e_ethdev.c | 9 ----
drivers/net/i40e/i40e_fdir.c | 5 +--
drivers/net/i40e/i40e_rxtx.c | 94 ++++++++----------------------------------
3 files changed, 19 insertions(+), 89 deletions(-)
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 2dd9fdc..4bf2a5f 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -2098,24 +2098,15 @@ i40e_allocate_dma_mem_d(__attribute__((unused)) struct i40e_hw *hw,
id++;
snprintf(z_name, sizeof(z_name), "i40e_dma_%"PRIu64, id);
-#ifdef RTE_LIBRTE_XEN_DOM0
mz = rte_memzone_reserve_bounded(z_name, size, SOCKET_ID_ANY, 0,
alignment, RTE_PGSIZE_2M);
-#else
- mz = rte_memzone_reserve_aligned(z_name, size, SOCKET_ID_ANY, 0,
- alignment);
-#endif
if (!mz)
return I40E_ERR_NO_MEMORY;
mem->id = id;
mem->size = size;
mem->va = mz->addr;
-#ifdef RTE_LIBRTE_XEN_DOM0
mem->pa = rte_mem_phy2mch(mz->memseg_id, mz->phys_addr);
-#else
- mem->pa = mz->phys_addr;
-#endif
return I40E_SUCCESS;
}
diff --git a/drivers/net/i40e/i40e_fdir.c b/drivers/net/i40e/i40e_fdir.c
index c9ce98f..ad64ff7 100644
--- a/drivers/net/i40e/i40e_fdir.c
+++ b/drivers/net/i40e/i40e_fdir.c
@@ -275,11 +275,8 @@ i40e_fdir_setup(struct i40e_pf *pf)
goto fail_mem;
}
pf->fdir.prg_pkt = mz->addr;
-#ifdef RTE_LIBRTE_XEN_DOM0
pf->fdir.dma_addr = rte_mem_phy2mch(mz->memseg_id, mz->phys_addr);
-#else
- pf->fdir.dma_addr = (uint64_t)mz->phys_addr;
-#endif
+
pf->fdir.match_counter_index = I40E_COUNTER_INDEX_FDIR(hw->pf_id);
PMD_DRV_LOG(INFO, "FDIR setup successfully, with programming queue %u.",
vsi->base_queue);
diff --git a/drivers/net/i40e/i40e_rxtx.c b/drivers/net/i40e/i40e_rxtx.c
index fd656d5..77b90fa 100644
--- a/drivers/net/i40e/i40e_rxtx.c
+++ b/drivers/net/i40e/i40e_rxtx.c
@@ -84,12 +84,6 @@
#define RTE_MBUF_DATA_DMA_ADDR(mb) \
((uint64_t)((mb)->buf_physaddr + (mb)->data_off))
-static const struct rte_memzone *
-i40e_ring_dma_zone_reserve(struct rte_eth_dev *dev,
- const char *ring_name,
- uint16_t queue_id,
- uint32_t ring_size,
- int socket_id);
static uint16_t i40e_xmit_pkts_simple(void *tx_queue,
struct rte_mbuf **tx_pkts,
uint16_t nb_pkts);
@@ -2170,11 +2164,8 @@ i40e_dev_rx_queue_setup(struct rte_eth_dev *dev,
/* Allocate the maximun number of RX ring hardware descriptor. */
ring_size = sizeof(union i40e_rx_desc) * I40E_MAX_RING_DESC;
ring_size = RTE_ALIGN(ring_size, I40E_DMA_MEM_ALIGN);
- rz = i40e_ring_dma_zone_reserve(dev,
- "rx_ring",
- queue_idx,
- ring_size,
- socket_id);
+ rz = rte_eth_dma_zone_reserve(dev, "rx_ring", queue_idx,
+ ring_size, I40E_ALIGN, socket_id);
if (!rz) {
i40e_dev_rx_queue_release(rxq);
PMD_DRV_LOG(ERR, "Failed to reserve DMA memory for RX");
@@ -2184,12 +2175,7 @@ i40e_dev_rx_queue_setup(struct rte_eth_dev *dev,
/* Zero all the descriptors in the ring. */
memset(rz->addr, 0, ring_size);
-#ifdef RTE_LIBRTE_XEN_DOM0
rxq->rx_ring_phys_addr = rte_mem_phy2mch(rz->memseg_id, rz->phys_addr);
-#else
- rxq->rx_ring_phys_addr = (uint64_t)rz->phys_addr;
-#endif
-
rxq->rx_ring = (union i40e_rx_desc *)rz->addr;
#ifdef RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC
@@ -2438,11 +2424,8 @@ i40e_dev_tx_queue_setup(struct rte_eth_dev *dev,
/* Allocate TX hardware ring descriptors. */
ring_size = sizeof(struct i40e_tx_desc) * I40E_MAX_RING_DESC;
ring_size = RTE_ALIGN(ring_size, I40E_DMA_MEM_ALIGN);
- tz = i40e_ring_dma_zone_reserve(dev,
- "tx_ring",
- queue_idx,
- ring_size,
- socket_id);
+ tz = rte_eth_dma_zone_reserve(dev, "tx_ring", queue_idx,
+ ring_size, I40E_ALIGN, socket_id);
if (!tz) {
i40e_dev_tx_queue_release(txq);
PMD_DRV_LOG(ERR, "Failed to reserve DMA memory for TX");
@@ -2467,11 +2450,7 @@ i40e_dev_tx_queue_setup(struct rte_eth_dev *dev,
txq->vsi = vsi;
txq->tx_deferred_start = tx_conf->tx_deferred_start;
-#ifdef RTE_LIBRTE_XEN_DOM0
txq->tx_ring_phys_addr = rte_mem_phy2mch(tz->memseg_id, tz->phys_addr);
-#else
- txq->tx_ring_phys_addr = (uint64_t)tz->phys_addr;
-#endif
txq->tx_ring = (struct i40e_tx_desc *)tz->addr;
/* Allocate software ring */
@@ -2518,47 +2497,22 @@ i40e_dev_tx_queue_release(void *txq)
rte_free(q);
}
-static const struct rte_memzone *
-i40e_ring_dma_zone_reserve(struct rte_eth_dev *dev,
- const char *ring_name,
- uint16_t queue_id,
- uint32_t ring_size,
- int socket_id)
-{
- char z_name[RTE_MEMZONE_NAMESIZE];
- const struct rte_memzone *mz;
-
- snprintf(z_name, sizeof(z_name), "%s_%s_%d_%d",
- dev->driver->pci_drv.name, ring_name,
- dev->data->port_id, queue_id);
- mz = rte_memzone_lookup(z_name);
- if (mz)
- return mz;
-
-#ifdef RTE_LIBRTE_XEN_DOM0
- return rte_memzone_reserve_bounded(z_name, ring_size,
- socket_id, 0, I40E_ALIGN, RTE_PGSIZE_2M);
-#else
- return rte_memzone_reserve_aligned(z_name, ring_size,
- socket_id, 0, I40E_ALIGN);
-#endif
-}
-
const struct rte_memzone *
i40e_memzone_reserve(const char *name, uint32_t len, int socket_id)
{
- const struct rte_memzone *mz = NULL;
+ const struct rte_memzone *mz;
mz = rte_memzone_lookup(name);
if (mz)
return mz;
-#ifdef RTE_LIBRTE_XEN_DOM0
- mz = rte_memzone_reserve_bounded(name, len,
- socket_id, 0, I40E_ALIGN, RTE_PGSIZE_2M);
-#else
- mz = rte_memzone_reserve_aligned(name, len,
+
+ if (is_xen_dom0_supported())
+ mz = rte_memzone_reserve_bounded(name, len,
+ socket_id, 0, I40E_ALIGN, RTE_PGSIZE_2M);
+ else
+ mz = rte_memzone_reserve_aligned(name, len,
socket_id, 0, I40E_ALIGN);
-#endif
+
return mz;
}
@@ -2971,11 +2925,9 @@ i40e_fdir_setup_tx_resources(struct i40e_pf *pf)
ring_size = sizeof(struct i40e_tx_desc) * I40E_FDIR_NUM_TX_DESC;
ring_size = RTE_ALIGN(ring_size, I40E_DMA_MEM_ALIGN);
- tz = i40e_ring_dma_zone_reserve(dev,
- "fdir_tx_ring",
- I40E_FDIR_QUEUE_ID,
- ring_size,
- SOCKET_ID_ANY);
+ tz = rte_eth_dma_zone_reserve(dev, "fdir_tx_ring",
+ I40E_FDIR_QUEUE_ID, ring_size,
+ I40E_ALIGN, SOCKET_ID_ANY);
if (!tz) {
i40e_dev_tx_queue_release(txq);
PMD_DRV_LOG(ERR, "Failed to reserve DMA memory for TX.");
@@ -2987,11 +2939,7 @@ i40e_fdir_setup_tx_resources(struct i40e_pf *pf)
txq->reg_idx = pf->fdir.fdir_vsi->base_queue;
txq->vsi = pf->fdir.fdir_vsi;
-#ifdef RTE_LIBRTE_XEN_DOM0
txq->tx_ring_phys_addr = rte_mem_phy2mch(tz->memseg_id, tz->phys_addr);
-#else
- txq->tx_ring_phys_addr = (uint64_t)tz->phys_addr;
-#endif
txq->tx_ring = (struct i40e_tx_desc *)tz->addr;
/*
* don't need to allocate software ring and reset for the fdir
@@ -3031,11 +2979,9 @@ i40e_fdir_setup_rx_resources(struct i40e_pf *pf)
ring_size = sizeof(union i40e_rx_desc) * I40E_FDIR_NUM_RX_DESC;
ring_size = RTE_ALIGN(ring_size, I40E_DMA_MEM_ALIGN);
- rz = i40e_ring_dma_zone_reserve(dev,
- "fdir_rx_ring",
- I40E_FDIR_QUEUE_ID,
- ring_size,
- SOCKET_ID_ANY);
+ rz = rte_eth_dma_zone_reserve(dev, "fdir_rx_ring",
+ I40E_FDIR_QUEUE_ID, ring_size,
+ I40E_ALIGN, SOCKET_ID_ANY);
if (!rz) {
i40e_dev_rx_queue_release(rxq);
PMD_DRV_LOG(ERR, "Failed to reserve DMA memory for RX.");
@@ -3047,11 +2993,7 @@ i40e_fdir_setup_rx_resources(struct i40e_pf *pf)
rxq->reg_idx = pf->fdir.fdir_vsi->base_queue;
rxq->vsi = pf->fdir.fdir_vsi;
-#ifdef RTE_LIBRTE_XEN_DOM0
rxq->rx_ring_phys_addr = rte_mem_phy2mch(rz->memseg_id, rz->phys_addr);
-#else
- rxq->rx_ring_phys_addr = (uint64_t)rz->phys_addr;
-#endif
rxq->rx_ring = (union i40e_rx_desc *)rz->addr;
/*
--
2.1.4
next prev parent reply other threads:[~2015-10-23 6:34 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-23 6:34 [dpdk-dev] [PATCH v2 0/6] Xen DOM0 runtime support Stephen Hemminger
2015-10-23 6:34 ` [dpdk-dev] [PATCH 1/6] xen: allow determining DOM0 at runtime Stephen Hemminger
2015-10-23 6:34 ` [dpdk-dev] [PATCH 2/6] ethdev: add common function for reserving DMA regions Stephen Hemminger
2015-10-23 6:34 ` [dpdk-dev] [PATCH 3/6] e1000: use rte_eth_dma_zone_reserve Stephen Hemminger
2015-10-23 6:34 ` [dpdk-dev] [PATCH 4/6] ixgbe: " Stephen Hemminger
2015-10-23 6:34 ` Stephen Hemminger [this message]
2015-10-23 6:34 ` [dpdk-dev] [PATCH 6/6] fm10k: " Stephen Hemminger
2015-10-26 7:24 ` [dpdk-dev] [PATCH v2 0/6] Xen DOM0 runtime support Liu, Jijiang
2015-11-03 0:40 ` Thomas Monjalon
-- strict thread matches above, loose matches on Subject: below --
2015-09-29 0:44 [dpdk-dev] [PATCH " Stephen Hemminger
2015-09-29 0:44 ` [dpdk-dev] [PATCH 5/6] i40e: use rte_eth_dma_zone_reserve Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445582090-5927-6-git-send-email-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).