DPDK patches and discussions
 help / color / mirror / Atom feed
From: David Hunt <david.hunt@intel.com>
To: dev@dpdk.org
Cc: Benjamin Boren <Ben.Boren@intel.com>
Subject: [dpdk-dev] [PATCH 01/11] lib: add armv8 rte_atomic.h
Date: Fri, 23 Oct 2015 15:17:03 +0100	[thread overview]
Message-ID: <1445609833-17649-2-git-send-email-david.hunt@intel.com> (raw)
In-Reply-To: <1445609833-17649-1-git-send-email-david.hunt@intel.com>

From: Benjamin Boren <Ben.Boren@intel.com>

Signed-off-by: Benjamin Boren <Ben.Boren@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
---
 .../common/include/arch/arm64/rte_atomic.h         | 269 +++++++++++++++++++++
 1 file changed, 269 insertions(+)
 create mode 100644 lib/librte_eal/common/include/arch/arm64/rte_atomic.h

diff --git a/lib/librte_eal/common/include/arch/arm64/rte_atomic.h b/lib/librte_eal/common/include/arch/arm64/rte_atomic.h
new file mode 100644
index 0000000..c9e0dff
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/arm64/rte_atomic.h
@@ -0,0 +1,269 @@
+/*
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2015 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_ATOMIC_ARM64_H_
+#define _RTE_ATOMIC_ARM64_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_atomic.h"
+
+/**
+ * @file
+ * Atomic Operations
+ *
+ * This file defines a API for atomic operations.
+ */
+
+/**
+ * General memory barrier.
+ *
+ * Guarantees that the LOAD and STORE operations generated before the
+ * barrier occur before the LOAD and STORE operations generated after.
+ */
+#define	rte_mb()  {asm volatile("dsb sy" : : : "memory"); }
+
+/**
+ * Write memory barrier.
+ *
+ * Guarantees that the STORE operations generated before the barrier
+ * occur before the STORE operations generated after.
+ */
+#define	rte_wmb() {asm volatile("dsb st" : : : "memory"); }
+
+/**
+ * Read memory barrier.
+ *
+ * Guarantees that the LOAD operations generated before the barrier
+ * occur before the LOAD operations generated after.
+ */
+#define	rte_rmb() {asm volatile("dsb ld" : : : "memory"); }
+
+
+
+/*------------------------- 16 bit atomic operations -------------------------*/
+
+#ifndef RTE_FORCE_INTRINSICS
+static inline int
+rte_atomic16_cmpset(volatile uint16_t *dst, uint16_t exp, uint16_t src)
+{
+	return __sync_bool_compare_and_swap(dst, exp, src);
+}
+
+static inline void
+rte_atomic16_inc(rte_atomic16_t *v)
+{
+	rte_atomic16_add(v, 1);
+}
+
+static inline void
+rte_atomic16_dec(rte_atomic16_t *v)
+{
+	rte_atomic16_sub(v, 1);
+}
+
+static inline int rte_atomic16_inc_and_test(rte_atomic16_t *v)
+{
+	return (__sync_add_and_fetch(&v->cnt, 1) == 0);
+}
+
+static inline int rte_atomic16_dec_and_test(rte_atomic16_t *v)
+{
+	return (__sync_sub_and_fetch(&v->cnt, 1) == 0);
+}
+
+static inline int rte_atomic16_test_and_set(rte_atomic16_t *v)
+{
+	return rte_atomic16_cmpset((volatile uint16_t *)&v->cnt, 0, 1);
+}
+
+
+/*------------------------- 32 bit atomic operations -------------------------*/
+
+static inline int
+rte_atomic32_cmpset(volatile uint32_t *dst, uint32_t exp, uint32_t src)
+{
+	return __sync_bool_compare_and_swap(dst, exp, src);
+}
+
+static inline void
+rte_atomic32_inc(rte_atomic32_t *v)
+{
+	rte_atomic32_add(v, 1);
+}
+
+static inline void
+rte_atomic32_dec(rte_atomic32_t *v)
+{
+	rte_atomic32_sub(v, 1);
+}
+
+static inline int rte_atomic32_inc_and_test(rte_atomic32_t *v)
+{
+	return (__sync_add_and_fetch(&v->cnt, 1) == 0);
+}
+
+static inline int rte_atomic32_dec_and_test(rte_atomic32_t *v)
+{
+	return (__sync_sub_and_fetch(&v->cnt, 1) == 0);
+}
+
+static inline int rte_atomic32_test_and_set(rte_atomic32_t *v)
+{
+	return rte_atomic32_cmpset((volatile uint32_t *)&v->cnt, 0, 1);
+}
+
+/*------------------------- 64 bit atomic operations -------------------------*/
+
+static inline int
+rte_atomic64_cmpset(volatile uint64_t *dst, uint64_t exp, uint64_t src)
+{
+	return __sync_bool_compare_and_swap(dst, exp, src);
+}
+
+static inline void
+rte_atomic64_init(rte_atomic64_t *v)
+{
+#ifdef __LP64__
+	v->cnt = 0;
+#else
+	int success = 0;
+	uint64_t tmp;
+
+	while (success == 0) {
+		tmp = v->cnt;
+		success = rte_atomic64_cmpset((volatile uint64_t *)&v->cnt,
+					tmp, 0);
+	}
+#endif
+}
+
+static inline int64_t
+rte_atomic64_read(rte_atomic64_t *v)
+{
+#ifdef __LP64__
+	return v->cnt;
+#else
+	int success = 0;
+	uint64_t tmp;
+
+	while (success == 0) {
+		tmp = v->cnt;
+		/* replace the value by itself */
+		success = rte_atomic64_cmpset((volatile uint64_t *)&v->cnt,
+					tmp, tmp);
+	}
+	return tmp;
+#endif
+}
+
+static inline void
+rte_atomic64_set(rte_atomic64_t *v, int64_t new_value)
+{
+#ifdef __LP64__
+	v->cnt = new_value;
+#else
+	int success = 0;
+	uint64_t tmp;
+
+	while (success == 0) {
+		tmp = v->cnt;
+		success = rte_atomic64_cmpset((volatile uint64_t *)&v->cnt,
+					tmp, new_value);
+	}
+#endif
+}
+
+static inline void
+rte_atomic64_add(rte_atomic64_t *v, int64_t inc)
+{
+	__sync_fetch_and_add(&v->cnt, inc);
+}
+
+static inline void
+rte_atomic64_sub(rte_atomic64_t *v, int64_t dec)
+{
+	__sync_fetch_and_sub(&v->cnt, dec);
+}
+
+static inline void
+rte_atomic64_inc(rte_atomic64_t *v)
+{
+	rte_atomic64_add(v, 1);
+}
+
+static inline void
+rte_atomic64_dec(rte_atomic64_t *v)
+{
+	rte_atomic64_sub(v, 1);
+}
+
+static inline int64_t
+rte_atomic64_add_return(rte_atomic64_t *v, int64_t inc)
+{
+	return __sync_add_and_fetch(&v->cnt, inc);
+}
+
+static inline int64_t
+rte_atomic64_sub_return(rte_atomic64_t *v, int64_t dec)
+{
+	return __sync_sub_and_fetch(&v->cnt, dec);
+}
+
+static inline int rte_atomic64_inc_and_test(rte_atomic64_t *v)
+{
+	return rte_atomic64_add_return(v, 1) == 0;
+}
+
+static inline int rte_atomic64_dec_and_test(rte_atomic64_t *v)
+{
+	return rte_atomic64_sub_return(v, 1) == 0;
+}
+
+static inline int rte_atomic64_test_and_set(rte_atomic64_t *v)
+{
+	return rte_atomic64_cmpset((volatile uint64_t *)&v->cnt, 0, 1);
+}
+
+static inline void rte_atomic64_clear(rte_atomic64_t *v)
+{
+	rte_atomic64_set(v, 0);
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_ATOMIC_ARM64_H_ */
-- 
2.1.4

  reply	other threads:[~2015-10-23 14:17 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-23 14:17 [dpdk-dev] [PATCH 00/11] add armv8 architecture support David Hunt
2015-10-23 14:17 ` David Hunt [this message]
2015-10-23 14:17 ` [dpdk-dev] [PATCH 02/11] lib: add armv8 rte_byteorder.h David Hunt
2015-10-23 14:17 ` [dpdk-dev] [PATCH 03/11] lib: add armv8 rte_cpuflags.h David Hunt
2015-10-26 16:23   ` Jan Viktorin
2015-10-23 14:17 ` [dpdk-dev] [PATCH 04/11] lib: add armv8 rte_cycles.h David Hunt
2015-10-23 14:17 ` [dpdk-dev] [PATCH 05/11] lib: add armv8 rte_memcpy.h David Hunt
2015-10-26 16:22   ` Jan Viktorin
2015-10-23 14:17 ` [dpdk-dev] [PATCH 06/11] lib: add armv8 rte_prefetch.h David Hunt
2015-10-23 14:17 ` [dpdk-dev] [PATCH 07/11] lib: add armv8 rte_rwlock.h David Hunt
2015-10-23 14:17 ` [dpdk-dev] [PATCH 08/11] lib: add armv8 rte_spinlock.h David Hunt
2015-10-23 14:17 ` [dpdk-dev] [PATCH 09/11] lib: add armv8 rte_vect.h David Hunt
2015-10-26 16:23   ` Jan Viktorin
2015-10-23 14:17 ` [dpdk-dev] [PATCH 10/11] mk: add makefile and config changes for armv8 architecture David Hunt
2015-10-26 16:22   ` Jan Viktorin
2015-10-27 18:24     ` Jan Viktorin
2015-10-26 16:22   ` Jan Viktorin
2015-10-23 14:17 ` [dpdk-dev] [PATCH 11/11] app: add armv8 cpuflags check to test_cpuflags application David Hunt
2015-10-26 16:21 ` [dpdk-dev] [PATCH 00/11] add armv8 architecture support Jan Viktorin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1445609833-17649-2-git-send-email-david.hunt@intel.com \
    --to=david.hunt@intel.com \
    --cc=Ben.Boren@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).