From: David Hunt <david.hunt@intel.com>
To: dev@dpdk.org
Cc: Benjamin Boren <Ben.Boren@intel.com>
Subject: [dpdk-dev] [PATCH 02/11] lib: add armv8 rte_byteorder.h
Date: Fri, 23 Oct 2015 15:17:04 +0100 [thread overview]
Message-ID: <1445609833-17649-3-git-send-email-david.hunt@intel.com> (raw)
In-Reply-To: <1445609833-17649-1-git-send-email-david.hunt@intel.com>
From: Benjamin Boren <Ben.Boren@intel.com>
Signed-off-by: Benjamin Boren <Ben.Boren@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
---
.../common/include/arch/arm64/rte_byteorder.h | 157 +++++++++++++++++++++
1 file changed, 157 insertions(+)
create mode 100644 lib/librte_eal/common/include/arch/arm64/rte_byteorder.h
diff --git a/lib/librte_eal/common/include/arch/arm64/rte_byteorder.h b/lib/librte_eal/common/include/arch/arm64/rte_byteorder.h
new file mode 100644
index 0000000..c1bd56e
--- /dev/null
+++ b/lib/librte_eal/common/include/arch/arm64/rte_byteorder.h
@@ -0,0 +1,157 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright (C) IBM Corporation 2014.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of IBM Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/* Inspired from FreeBSD src/sys/powerpc/include/endian.h
+ * Copyright (c) 1987, 1991, 1993
+ * The Regents of the University of California. All rights reserved.
+*/
+
+#ifndef _RTE_BYTEORDER_ARM_64_H_
+#define _RTE_BYTEORDER_ARM_64_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "generic/rte_byteorder.h"
+
+/*
+ * An architecture-optimized byte swap for a 16-bit value.
+ *
+ * Do not use this function directly. The preferred function is rte_bswap16().
+ */
+static inline uint16_t rte_arch_bswap16(uint16_t _x)
+{
+ register uint16_t x = _x;
+
+ asm volatile ("rev16 %[x1], %[x2]"
+ : [x1] "=r" (x)
+ : [x2] "r" (x));
+ return x;
+}
+
+/*
+ * An architecture-optimized byte swap for a 32-bit value.
+ *
+ * Do not use this function directly. The preferred function is rte_bswap32().
+ */
+static inline uint32_t rte_arch_bswap32(uint32_t _x)
+{
+ register uint32_t x = _x;
+
+ asm volatile ("rev32 %[x1], %[x2]"
+ : [x1] "=r" (x)
+ : [x2] "r" (x));
+ return x;
+}
+
+/*
+ * An architecture-optimized byte swap for a 64-bit value.
+ *
+ * Do not use this function directly. The preferred function is rte_bswap64().
+ */
+/* 64-bit mode */
+static inline uint64_t rte_arch_bswap64(uint64_t _x)
+{
+ register uint64_t x = _x;
+
+ asm volatile ("rev %[x1], %[x2]"
+ : [x1] "=r" (x)
+ : [x2] "r" (x));
+ return x;
+}
+
+#ifndef RTE_FORCE_INTRINSICS
+#define rte_bswap16(x) ((uint16_t)(__builtin_constant_p(x) ? \
+ rte_constant_bswap16(x) : \
+ rte_arch_bswap16(x)))
+
+#define rte_bswap32(x) ((uint32_t)(__builtin_constant_p(x) ? \
+ rte_constant_bswap32(x) : \
+ rte_arch_bswap32(x)))
+
+#define rte_bswap64(x) ((uint64_t)(__builtin_constant_p(x) ? \
+ rte_constant_bswap64(x) : \
+ rte_arch_bswap64(x)))
+#else
+/*
+ * __builtin_bswap16 is only available gcc 4.8 and upwards
+ */
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 8)
+#define rte_bswap16(x) ((uint16_t)(__builtin_constant_p(x) ? \
+ rte_constant_bswap16(x) : \
+ rte_arch_bswap16(x)))
+#endif
+#endif
+
+#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
+
+#define rte_cpu_to_le_16(x) (x)
+#define rte_cpu_to_le_32(x) (x)
+#define rte_cpu_to_le_64(x) (x)
+
+#define rte_cpu_to_be_16(x) rte_bswap16(x)
+#define rte_cpu_to_be_32(x) rte_bswap32(x)
+#define rte_cpu_to_be_64(x) rte_bswap64(x)
+
+#define rte_le_to_cpu_16(x) (x)
+#define rte_le_to_cpu_32(x) (x)
+#define rte_le_to_cpu_64(x) (x)
+
+#define rte_be_to_cpu_16(x) rte_bswap16(x)
+#define rte_be_to_cpu_32(x) rte_bswap32(x)
+#define rte_be_to_cpu_64(x) rte_bswap64(x)
+
+#else /* RTE_BIG_ENDIAN */
+
+#define rte_cpu_to_le_16(x) rte_bswap16(x)
+#define rte_cpu_to_le_32(x) rte_bswap32(x)
+#define rte_cpu_to_le_64(x) rte_bswap64(x)
+
+#define rte_cpu_to_be_16(x) (x)
+#define rte_cpu_to_be_32(x) (x)
+#define rte_cpu_to_be_64(x) (x)
+
+#define rte_le_to_cpu_16(x) rte_bswap16(x)
+#define rte_le_to_cpu_32(x) rte_bswap32(x)
+#define rte_le_to_cpu_64(x) rte_bswap64(x)
+
+#define rte_be_to_cpu_16(x) (x)
+#define rte_be_to_cpu_32(x) (x)
+#define rte_be_to_cpu_64(x) (x)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_BYTEORDER_ARM_64_H_ */
--
2.1.4
next prev parent reply other threads:[~2015-10-23 14:17 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-23 14:17 [dpdk-dev] [PATCH 00/11] add armv8 architecture support David Hunt
2015-10-23 14:17 ` [dpdk-dev] [PATCH 01/11] lib: add armv8 rte_atomic.h David Hunt
2015-10-23 14:17 ` David Hunt [this message]
2015-10-23 14:17 ` [dpdk-dev] [PATCH 03/11] lib: add armv8 rte_cpuflags.h David Hunt
2015-10-26 16:23 ` Jan Viktorin
2015-10-23 14:17 ` [dpdk-dev] [PATCH 04/11] lib: add armv8 rte_cycles.h David Hunt
2015-10-23 14:17 ` [dpdk-dev] [PATCH 05/11] lib: add armv8 rte_memcpy.h David Hunt
2015-10-26 16:22 ` Jan Viktorin
2015-10-23 14:17 ` [dpdk-dev] [PATCH 06/11] lib: add armv8 rte_prefetch.h David Hunt
2015-10-23 14:17 ` [dpdk-dev] [PATCH 07/11] lib: add armv8 rte_rwlock.h David Hunt
2015-10-23 14:17 ` [dpdk-dev] [PATCH 08/11] lib: add armv8 rte_spinlock.h David Hunt
2015-10-23 14:17 ` [dpdk-dev] [PATCH 09/11] lib: add armv8 rte_vect.h David Hunt
2015-10-26 16:23 ` Jan Viktorin
2015-10-23 14:17 ` [dpdk-dev] [PATCH 10/11] mk: add makefile and config changes for armv8 architecture David Hunt
2015-10-26 16:22 ` Jan Viktorin
2015-10-27 18:24 ` Jan Viktorin
2015-10-26 16:22 ` Jan Viktorin
2015-10-23 14:17 ` [dpdk-dev] [PATCH 11/11] app: add armv8 cpuflags check to test_cpuflags application David Hunt
2015-10-26 16:21 ` [dpdk-dev] [PATCH 00/11] add armv8 architecture support Jan Viktorin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445609833-17649-3-git-send-email-david.hunt@intel.com \
--to=david.hunt@intel.com \
--cc=Ben.Boren@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).