[dpdk-dev] [PATCH v3 0/8] interrupt mode for e1000

[dpdk-dev] [PATCH v3 0/8] interrupt mode for e1000

[Yong Liu]

v3 changes:
	add in release note

v2 changes:
	describe interrupt mode work with uio and vfio+msi
	replace attribuite __unused__ with __rte_unused

This patch set will enable interrup for physical and emulated e1000 device.
Rx queue interrupt will work with uio driver or vfio driver with msi mode.
l3fwd-power will disable interrupt immediately when wake-up for that e1000 not
support interrupt auto clear.
LSC and rxq interrupt will be seperated for e1000 can only support one
interrupt cause in the same time.

The patch set is developed based on one previous patch set
"[PATCH v1 00/11] interrupt mode for i40e"
http://www.dpdk.org/ml/archives/dev/2015-September/023903.html

Marvin Liu (7):
  e1000: add rx interrupt support
  e1000: separate lsc and rxq interrupt disable function
  e1000: add ethdev rxq enable and disable function
  e1000: add rxq interrupt handler
  e1000: check lsc and rxq not enable in the same time
  e1000: lsc interrupt setup function only enable itself
  l3fwd-power: disable interrupt when wake up from sleep

 drivers/net/e1000/em_ethdev.c | 181 +++++++++++++++++++++++++++++++++++++-----
 examples/l3fwd-power/main.c   |   1 +
 2 files changed, 163 insertions(+), 19 deletions(-)

-- 
1.9.3

Re: [dpdk-dev] [PATCH v3 0/8] interrupt mode for e1000

[Liang, Cunming]

Hi,

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Yong Liu
> Sent: Thursday, October 29, 2015 5:19 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v3 0/8] interrupt mode for e1000
> 
> This patch set will enable interrup for physical and emulated e1000 device.
> Rx queue interrupt will work with uio driver or vfio driver with msi mode.
> l3fwd-power will disable interrupt immediately when wake-up for that e1000 not
> support interrupt auto clear.
> LSC and rxq interrupt will be seperated for e1000 can only support one
> interrupt cause in the same time.
> 
> The patch set is developed based on one previous patch set
> "[PATCH v1 00/11] interrupt mode for i40e"
> http://www.dpdk.org/ml/archives/dev/2015-September/023903.html
> 
> v3 changes:
>     add in release note
> 
> v2 changes:
>     describe interrupt mode work with uio and vfio+msi
>     replace attribuite __unused__ with __rte_unused
> 
> Marvin Liu (8):
>   e1000: add rx interrupt support
>   e1000: separate lsc and rxq interrupt disable function
>   e1000: add ethdev rxq enable and disable function
>   e1000: add rxq interrupt handler
>   e1000: check lsc and rxq not enable in the same time
>   e1000: lsc interrupt setup function only enable itself
>   l3fwd-power: disable interrupt when wake up from sleep
>   doc: release note update for e1000 intr mode
> 
>  doc/guides/rel_notes/release_2_2.rst |   1 +
>  drivers/net/e1000/em_ethdev.c        | 181
> +++++++++++++++++++++++++++++++----
>  examples/l3fwd-power/main.c          |   1 +
>  3 files changed, 164 insertions(+), 19 deletions(-)
> 
> --
> 1.9.3

Acked-by: Cunming Liang <cunming.liang@intel.com>

[dpdk-dev] [PATCH v3 0/8] interrupt mode for e1000

[Yong Liu]

This patch set will enable interrup for physical and emulated e1000 device.
Rx queue interrupt will work with uio driver or vfio driver with msi mode.
l3fwd-power will disable interrupt immediately when wake-up for that e1000 not
support interrupt auto clear.
LSC and rxq interrupt will be seperated for e1000 can only support one
interrupt cause in the same time.

The patch set is developed based on one previous patch set
"[PATCH v1 00/11] interrupt mode for i40e"
http://www.dpdk.org/ml/archives/dev/2015-September/023903.html

v3 changes:
    add in release note

v2 changes:
    describe interrupt mode work with uio and vfio+msi
    replace attribuite __unused__ with __rte_unused

Marvin Liu (8):
  e1000: add rx interrupt support
  e1000: separate lsc and rxq interrupt disable function
  e1000: add ethdev rxq enable and disable function
  e1000: add rxq interrupt handler
  e1000: check lsc and rxq not enable in the same time
  e1000: lsc interrupt setup function only enable itself
  l3fwd-power: disable interrupt when wake up from sleep
  doc: release note update for e1000 intr mode

 doc/guides/rel_notes/release_2_2.rst |   1 +
 drivers/net/e1000/em_ethdev.c        | 181 +++++++++++++++++++++++++++++++----
 examples/l3fwd-power/main.c          |   1 +
 3 files changed, 164 insertions(+), 19 deletions(-)

-- 
1.9.3