From: Adrien Mazarguil <adrien.mazarguil@6wind.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2 13/16] mlx5: add IPv6 RSS support using experimental flows
Date: Fri, 30 Oct 2015 19:55:16 +0100 [thread overview]
Message-ID: <1446231319-8185-14-git-send-email-adrien.mazarguil@6wind.com> (raw)
In-Reply-To: <1446231319-8185-1-git-send-email-adrien.mazarguil@6wind.com>
Normal flows do not currently provide IPv6 support.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
---
drivers/net/mlx5/Makefile | 4 +++
drivers/net/mlx5/mlx5_mac.c | 18 ++++++------
drivers/net/mlx5/mlx5_rxmode.c | 22 +++++++--------
drivers/net/mlx5/mlx5_rxq.c | 63 +++++++++++++++++++++++++++++++++++++-----
drivers/net/mlx5/mlx5_rxtx.h | 20 +++++++++-----
5 files changed, 93 insertions(+), 34 deletions(-)
diff --git a/drivers/net/mlx5/Makefile b/drivers/net/mlx5/Makefile
index 54f1e89..2f9f2b8 100644
--- a/drivers/net/mlx5/Makefile
+++ b/drivers/net/mlx5/Makefile
@@ -116,6 +116,10 @@ mlx5_autoconf.h: $(RTE_SDK)/scripts/auto-config-h.sh
HAVE_EXP_QUERY_DEVICE \
infiniband/verbs.h \
type 'struct ibv_exp_device_attr' $(AUTOCONF_OUTPUT)
+ $Q sh -- '$<' '$@' \
+ HAVE_FLOW_SPEC_IPV6 \
+ infiniband/verbs.h \
+ type 'struct ibv_exp_flow_spec_ipv6' $(AUTOCONF_OUTPUT)
mlx5.o: mlx5_autoconf.h
diff --git a/drivers/net/mlx5/mlx5_mac.c b/drivers/net/mlx5/mlx5_mac.c
index c7927c1..e37ce06 100644
--- a/drivers/net/mlx5/mlx5_mac.c
+++ b/drivers/net/mlx5/mlx5_mac.c
@@ -120,8 +120,8 @@ hash_rxq_del_mac_flow(struct hash_rxq *hash_rxq, unsigned int mac_index,
(*mac)[0], (*mac)[1], (*mac)[2], (*mac)[3], (*mac)[4], (*mac)[5],
mac_index,
vlan_index);
- claim_zero(ibv_destroy_flow(hash_rxq->mac_flow
- [mac_index][vlan_index]));
+ claim_zero(ibv_exp_destroy_flow(hash_rxq->mac_flow
+ [mac_index][vlan_index]));
hash_rxq->mac_flow[mac_index][vlan_index] = NULL;
}
@@ -237,14 +237,14 @@ static int
hash_rxq_add_mac_flow(struct hash_rxq *hash_rxq, unsigned int mac_index,
unsigned int vlan_index)
{
- struct ibv_flow *flow;
+ struct ibv_exp_flow *flow;
struct priv *priv = hash_rxq->priv;
const uint8_t (*mac)[ETHER_ADDR_LEN] =
(const uint8_t (*)[ETHER_ADDR_LEN])
priv->mac[mac_index].addr_bytes;
FLOW_ATTR_SPEC_ETH(data, hash_rxq_flow_attr(hash_rxq, NULL, 0));
- struct ibv_flow_attr *attr = &data->attr;
- struct ibv_flow_spec_eth *spec = &data->spec;
+ struct ibv_exp_flow_attr *attr = &data->attr;
+ struct ibv_exp_flow_spec_eth *spec = &data->spec;
unsigned int vlan_enabled = !!priv->vlan_filter_n;
unsigned int vlan_id = priv->vlan_filter[vlan_index];
@@ -259,10 +259,10 @@ hash_rxq_add_mac_flow(struct hash_rxq *hash_rxq, unsigned int mac_index,
assert(((uint8_t *)attr + sizeof(*attr)) == (uint8_t *)spec);
hash_rxq_flow_attr(hash_rxq, attr, sizeof(data));
/* The first specification must be Ethernet. */
- assert(spec->type == IBV_FLOW_SPEC_ETH);
+ assert(spec->type == IBV_EXP_FLOW_SPEC_ETH);
assert(spec->size == sizeof(*spec));
- *spec = (struct ibv_flow_spec_eth){
- .type = IBV_FLOW_SPEC_ETH,
+ *spec = (struct ibv_exp_flow_spec_eth){
+ .type = IBV_EXP_FLOW_SPEC_ETH,
.size = sizeof(*spec),
.val = {
.dst_mac = {
@@ -286,7 +286,7 @@ hash_rxq_add_mac_flow(struct hash_rxq *hash_rxq, unsigned int mac_index,
vlan_id);
/* Create related flow. */
errno = 0;
- flow = ibv_create_flow(hash_rxq->qp, attr);
+ flow = ibv_exp_create_flow(hash_rxq->qp, attr);
if (flow == NULL) {
/* It's not clear whether errno is always set in this case. */
ERROR("%p: flow configuration failed, errno=%d: %s",
diff --git a/drivers/net/mlx5/mlx5_rxmode.c b/drivers/net/mlx5/mlx5_rxmode.c
index f7de1b8..096fd18 100644
--- a/drivers/net/mlx5/mlx5_rxmode.c
+++ b/drivers/net/mlx5/mlx5_rxmode.c
@@ -73,9 +73,9 @@ static void hash_rxq_allmulticast_disable(struct hash_rxq *);
static int
hash_rxq_promiscuous_enable(struct hash_rxq *hash_rxq)
{
- struct ibv_flow *flow;
+ struct ibv_exp_flow *flow;
FLOW_ATTR_SPEC_ETH(data, hash_rxq_flow_attr(hash_rxq, NULL, 0));
- struct ibv_flow_attr *attr = &data->attr;
+ struct ibv_exp_flow_attr *attr = &data->attr;
if (hash_rxq->promisc_flow != NULL)
return 0;
@@ -84,7 +84,7 @@ hash_rxq_promiscuous_enable(struct hash_rxq *hash_rxq)
* on specific MAC addresses. */
hash_rxq_flow_attr(hash_rxq, attr, sizeof(data));
errno = 0;
- flow = ibv_create_flow(hash_rxq->qp, attr);
+ flow = ibv_exp_create_flow(hash_rxq->qp, attr);
if (flow == NULL) {
/* It's not clear whether errno is always set in this case. */
ERROR("%p: flow configuration failed, errno=%d: %s",
@@ -168,7 +168,7 @@ hash_rxq_promiscuous_disable(struct hash_rxq *hash_rxq)
if (hash_rxq->promisc_flow == NULL)
return;
DEBUG("%p: disabling promiscuous mode", (void *)hash_rxq);
- claim_zero(ibv_destroy_flow(hash_rxq->promisc_flow));
+ claim_zero(ibv_exp_destroy_flow(hash_rxq->promisc_flow));
hash_rxq->promisc_flow = NULL;
DEBUG("%p: promiscuous mode disabled", (void *)hash_rxq);
}
@@ -219,10 +219,10 @@ mlx5_promiscuous_disable(struct rte_eth_dev *dev)
static int
hash_rxq_allmulticast_enable(struct hash_rxq *hash_rxq)
{
- struct ibv_flow *flow;
+ struct ibv_exp_flow *flow;
FLOW_ATTR_SPEC_ETH(data, hash_rxq_flow_attr(hash_rxq, NULL, 0));
- struct ibv_flow_attr *attr = &data->attr;
- struct ibv_flow_spec_eth *spec = &data->spec;
+ struct ibv_exp_flow_attr *attr = &data->attr;
+ struct ibv_exp_flow_spec_eth *spec = &data->spec;
if (hash_rxq->allmulti_flow != NULL)
return 0;
@@ -233,8 +233,8 @@ hash_rxq_allmulticast_enable(struct hash_rxq *hash_rxq)
*/
assert(((uint8_t *)attr + sizeof(*attr)) == (uint8_t *)spec);
hash_rxq_flow_attr(hash_rxq, attr, sizeof(data));
- *spec = (struct ibv_flow_spec_eth){
- .type = IBV_FLOW_SPEC_ETH,
+ *spec = (struct ibv_exp_flow_spec_eth){
+ .type = IBV_EXP_FLOW_SPEC_ETH,
.size = sizeof(*spec),
.val = {
.dst_mac = "\x01\x00\x00\x00\x00\x00",
@@ -244,7 +244,7 @@ hash_rxq_allmulticast_enable(struct hash_rxq *hash_rxq)
},
};
errno = 0;
- flow = ibv_create_flow(hash_rxq->qp, attr);
+ flow = ibv_exp_create_flow(hash_rxq->qp, attr);
if (flow == NULL) {
/* It's not clear whether errno is always set in this case. */
ERROR("%p: flow configuration failed, errno=%d: %s",
@@ -328,7 +328,7 @@ hash_rxq_allmulticast_disable(struct hash_rxq *hash_rxq)
if (hash_rxq->allmulti_flow == NULL)
return;
DEBUG("%p: disabling allmulticast mode", (void *)hash_rxq);
- claim_zero(ibv_destroy_flow(hash_rxq->allmulti_flow));
+ claim_zero(ibv_exp_destroy_flow(hash_rxq->allmulti_flow));
hash_rxq->allmulti_flow = NULL;
DEBUG("%p: allmulticast mode disabled", (void *)hash_rxq);
}
diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
index bdd5429..084bf41 100644
--- a/drivers/net/mlx5/mlx5_rxq.c
+++ b/drivers/net/mlx5/mlx5_rxq.c
@@ -74,7 +74,7 @@ const struct hash_rxq_init hash_rxq_init[] = {
.dpdk_rss_hf = ETH_RSS_NONFRAG_IPV4_TCP,
.flow_priority = 0,
.flow_spec.tcp_udp = {
- .type = IBV_FLOW_SPEC_TCP,
+ .type = IBV_EXP_FLOW_SPEC_TCP,
.size = sizeof(hash_rxq_init[0].flow_spec.tcp_udp),
},
.underlayer = &hash_rxq_init[HASH_RXQ_IPV4],
@@ -87,7 +87,7 @@ const struct hash_rxq_init hash_rxq_init[] = {
.dpdk_rss_hf = ETH_RSS_NONFRAG_IPV4_UDP,
.flow_priority = 0,
.flow_spec.tcp_udp = {
- .type = IBV_FLOW_SPEC_UDP,
+ .type = IBV_EXP_FLOW_SPEC_UDP,
.size = sizeof(hash_rxq_init[0].flow_spec.tcp_udp),
},
.underlayer = &hash_rxq_init[HASH_RXQ_IPV4],
@@ -99,17 +99,57 @@ const struct hash_rxq_init hash_rxq_init[] = {
ETH_RSS_FRAG_IPV4),
.flow_priority = 1,
.flow_spec.ipv4 = {
- .type = IBV_FLOW_SPEC_IPV4,
+ .type = IBV_EXP_FLOW_SPEC_IPV4,
.size = sizeof(hash_rxq_init[0].flow_spec.ipv4),
},
.underlayer = &hash_rxq_init[HASH_RXQ_ETH],
},
+#ifdef HAVE_FLOW_SPEC_IPV6
+ [HASH_RXQ_TCPV6] = {
+ .hash_fields = (IBV_EXP_RX_HASH_SRC_IPV6 |
+ IBV_EXP_RX_HASH_DST_IPV6 |
+ IBV_EXP_RX_HASH_SRC_PORT_TCP |
+ IBV_EXP_RX_HASH_DST_PORT_TCP),
+ .dpdk_rss_hf = ETH_RSS_NONFRAG_IPV6_TCP,
+ .flow_priority = 0,
+ .flow_spec.tcp_udp = {
+ .type = IBV_EXP_FLOW_SPEC_TCP,
+ .size = sizeof(hash_rxq_init[0].flow_spec.tcp_udp),
+ },
+ .underlayer = &hash_rxq_init[HASH_RXQ_IPV6],
+ },
+ [HASH_RXQ_UDPV6] = {
+ .hash_fields = (IBV_EXP_RX_HASH_SRC_IPV6 |
+ IBV_EXP_RX_HASH_DST_IPV6 |
+ IBV_EXP_RX_HASH_SRC_PORT_UDP |
+ IBV_EXP_RX_HASH_DST_PORT_UDP),
+ .dpdk_rss_hf = ETH_RSS_NONFRAG_IPV6_UDP,
+ .flow_priority = 0,
+ .flow_spec.tcp_udp = {
+ .type = IBV_EXP_FLOW_SPEC_UDP,
+ .size = sizeof(hash_rxq_init[0].flow_spec.tcp_udp),
+ },
+ .underlayer = &hash_rxq_init[HASH_RXQ_IPV6],
+ },
+ [HASH_RXQ_IPV6] = {
+ .hash_fields = (IBV_EXP_RX_HASH_SRC_IPV6 |
+ IBV_EXP_RX_HASH_DST_IPV6),
+ .dpdk_rss_hf = (ETH_RSS_IPV6 |
+ ETH_RSS_FRAG_IPV6),
+ .flow_priority = 1,
+ .flow_spec.ipv6 = {
+ .type = IBV_EXP_FLOW_SPEC_IPV6,
+ .size = sizeof(hash_rxq_init[0].flow_spec.ipv6),
+ },
+ .underlayer = &hash_rxq_init[HASH_RXQ_ETH],
+ },
+#endif /* HAVE_FLOW_SPEC_IPV6 */
[HASH_RXQ_ETH] = {
.hash_fields = 0,
.dpdk_rss_hf = 0,
.flow_priority = 2,
.flow_spec.eth = {
- .type = IBV_FLOW_SPEC_ETH,
+ .type = IBV_EXP_FLOW_SPEC_ETH,
.size = sizeof(hash_rxq_init[0].flow_spec.eth),
},
.underlayer = NULL,
@@ -127,8 +167,17 @@ static const struct ind_table_init ind_table_init[] = {
1 << HASH_RXQ_TCPV4 |
1 << HASH_RXQ_UDPV4 |
1 << HASH_RXQ_IPV4 |
+#ifdef HAVE_FLOW_SPEC_IPV6
+ 1 << HASH_RXQ_TCPV6 |
+ 1 << HASH_RXQ_UDPV6 |
+ 1 << HASH_RXQ_IPV6 |
+#endif /* HAVE_FLOW_SPEC_IPV6 */
0,
+#ifdef HAVE_FLOW_SPEC_IPV6
+ .hash_types_n = 6,
+#else /* HAVE_FLOW_SPEC_IPV6 */
.hash_types_n = 3,
+#endif /* HAVE_FLOW_SPEC_IPV6 */
},
{
.max_size = 1,
@@ -174,7 +223,7 @@ const size_t rss_hash_default_key_len = sizeof(rss_hash_default_key);
*/
size_t
hash_rxq_flow_attr(const struct hash_rxq *hash_rxq,
- struct ibv_flow_attr *flow_attr,
+ struct ibv_exp_flow_attr *flow_attr,
size_t flow_attr_size)
{
size_t offset = sizeof(*flow_attr);
@@ -191,8 +240,8 @@ hash_rxq_flow_attr(const struct hash_rxq *hash_rxq,
return offset;
flow_attr_size = offset;
init = &hash_rxq_init[type];
- *flow_attr = (struct ibv_flow_attr){
- .type = IBV_FLOW_ATTR_NORMAL,
+ *flow_attr = (struct ibv_exp_flow_attr){
+ .type = IBV_EXP_FLOW_ATTR_NORMAL,
.priority = init->flow_priority,
.num_of_specs = 0,
.port = hash_rxq->priv->port,
diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
index dc23f4f..25e256f 100644
--- a/drivers/net/mlx5/mlx5_rxtx.h
+++ b/drivers/net/mlx5/mlx5_rxtx.h
@@ -59,6 +59,7 @@
#include "mlx5_utils.h"
#include "mlx5.h"
+#include "mlx5_autoconf.h"
#include "mlx5_defs.h"
struct mlx5_rxq_stats {
@@ -124,14 +125,19 @@ enum hash_rxq_type {
HASH_RXQ_TCPV4,
HASH_RXQ_UDPV4,
HASH_RXQ_IPV4,
+#ifdef HAVE_FLOW_SPEC_IPV6
+ HASH_RXQ_TCPV6,
+ HASH_RXQ_UDPV6,
+ HASH_RXQ_IPV6,
+#endif /* HAVE_FLOW_SPEC_IPV6 */
HASH_RXQ_ETH,
};
/* Flow structure with Ethernet specification. It is packed to prevent padding
* between attr and spec as this layout is expected by libibverbs. */
struct flow_attr_spec_eth {
- struct ibv_flow_attr attr;
- struct ibv_flow_spec_eth spec;
+ struct ibv_exp_flow_attr attr;
+ struct ibv_exp_flow_spec_eth spec;
} __attribute__((packed));
/* Define a struct flow_attr_spec_eth object as an array of at least
@@ -147,7 +153,7 @@ struct hash_rxq_init {
uint64_t hash_fields; /* Fields that participate in the hash. */
uint64_t dpdk_rss_hf; /* Matching DPDK RSS hash fields. */
unsigned int flow_priority; /* Flow priority to use. */
- struct ibv_flow_spec flow_spec; /* Flow specification template. */
+ struct ibv_exp_flow_spec flow_spec; /* Flow specification template. */
const struct hash_rxq_init *underlayer; /* Pointer to underlayer. */
};
@@ -170,9 +176,9 @@ struct hash_rxq {
struct ibv_qp *qp; /* Hash RX QP. */
enum hash_rxq_type type; /* Hash RX queue type. */
/* MAC flow steering rules, one per VLAN ID. */
- struct ibv_flow *mac_flow[MLX5_MAX_MAC_ADDRESSES][MLX5_MAX_VLAN_IDS];
- struct ibv_flow *promisc_flow; /* Promiscuous flow. */
- struct ibv_flow *allmulti_flow; /* Multicast flow. */
+ struct ibv_exp_flow *mac_flow[MLX5_MAX_MAC_ADDRESSES][MLX5_MAX_VLAN_IDS];
+ struct ibv_exp_flow *promisc_flow; /* Promiscuous flow. */
+ struct ibv_exp_flow *allmulti_flow; /* Multicast flow. */
};
/* TX element. */
@@ -225,7 +231,7 @@ extern const unsigned int hash_rxq_init_n;
extern uint8_t rss_hash_default_key[];
extern const size_t rss_hash_default_key_len;
-size_t hash_rxq_flow_attr(const struct hash_rxq *, struct ibv_flow_attr *,
+size_t hash_rxq_flow_attr(const struct hash_rxq *, struct ibv_exp_flow_attr *,
size_t);
int priv_create_hash_rxqs(struct priv *);
void priv_destroy_hash_rxqs(struct priv *);
--
2.1.0
next prev parent reply other threads:[~2015-10-30 18:56 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-05 17:54 [dpdk-dev] [PATCH 00/17] Enhance mlx5 with Mellanox OFED 3.1 Adrien Mazarguil
2015-10-05 17:54 ` [dpdk-dev] [PATCH 01/17] mlx5: use fast Verbs interface for scattered RX operation Adrien Mazarguil
2015-10-05 17:54 ` [dpdk-dev] [PATCH 02/17] mlx5: get rid of the WR structure in RX queue elements Adrien Mazarguil
2015-10-05 17:54 ` [dpdk-dev] [PATCH 03/17] mlx5: refactor RX code for the new Verbs RSS API Adrien Mazarguil
2015-10-05 17:54 ` [dpdk-dev] [PATCH 04/17] mlx5: restore allmulti and promisc modes after device restart Adrien Mazarguil
2015-10-05 17:54 ` [dpdk-dev] [PATCH 05/17] mlx5: use separate indirection table for default hash RX queue Adrien Mazarguil
2015-10-05 17:54 ` [dpdk-dev] [PATCH 06/17] mlx5: adapt indirection table size depending on RX queues number Adrien Mazarguil
2015-10-05 17:54 ` [dpdk-dev] [PATCH 07/17] mlx5: define specific flow steering rules for each hash RX QP Adrien Mazarguil
2015-10-05 17:54 ` [dpdk-dev] [PATCH 08/17] mlx5: use alternate method to configure promiscuous mode Adrien Mazarguil
2015-10-05 17:54 ` [dpdk-dev] [PATCH 09/17] mlx5: add RSS hash update/get Adrien Mazarguil
2015-10-05 17:54 ` [dpdk-dev] [PATCH 10/17] mlx5: use one RSS hash key per flow type Adrien Mazarguil
2015-10-05 17:54 ` [dpdk-dev] [PATCH 11/17] app/testpmd: add missing type to RSS hash commands Adrien Mazarguil
2015-10-05 17:54 ` [dpdk-dev] [PATCH 12/17] app/testpmd: fix missing initialization in the RSS hash show command Adrien Mazarguil
2015-10-05 17:54 ` [dpdk-dev] [PATCH 13/17] mlx5: remove normal MAC flows when enabling promiscuous mode Adrien Mazarguil
2015-10-05 17:54 ` [dpdk-dev] [PATCH 14/17] mlx5: use experimental flows in hash RX queues Adrien Mazarguil
2015-10-05 17:54 ` [dpdk-dev] [PATCH 15/17] mlx5: enable multi packet send WR in TX CQ Adrien Mazarguil
2015-10-05 17:54 ` [dpdk-dev] [PATCH 16/17] mlx5: fix compilation error with GCC < 4.6 Adrien Mazarguil
2015-10-05 17:54 ` [dpdk-dev] [PATCH 17/17] doc: update mlx5 documentation Adrien Mazarguil
2015-10-06 8:54 ` [dpdk-dev] [PATCH 00/17] Enhance mlx5 with Mellanox OFED 3.1 Stephen Hemminger
2015-10-06 9:58 ` Vincent JARDIN
2015-10-07 13:30 ` Joongi Kim
2015-10-30 18:55 ` [dpdk-dev] [PATCH v2 00/16] " Adrien Mazarguil
2015-10-30 18:55 ` [dpdk-dev] [PATCH v2 01/16] mlx5: use fast Verbs interface for scattered RX operation Adrien Mazarguil
2015-10-30 18:55 ` [dpdk-dev] [PATCH v2 02/16] mlx5: get rid of the WR structure in RX queue elements Adrien Mazarguil
2015-10-30 18:55 ` [dpdk-dev] [PATCH v2 03/16] mlx5: refactor RX code for the new Verbs RSS API Adrien Mazarguil
2015-10-30 18:55 ` [dpdk-dev] [PATCH v2 04/16] mlx5: use separate indirection table for default hash RX queue Adrien Mazarguil
2015-10-30 18:55 ` [dpdk-dev] [PATCH v2 05/16] mlx5: adapt indirection table size depending on RX queues number Adrien Mazarguil
2015-10-30 18:55 ` [dpdk-dev] [PATCH v2 06/16] mlx5: define specific flow steering rules for each hash RX QP Adrien Mazarguil
2015-10-30 18:55 ` [dpdk-dev] [PATCH v2 07/16] mlx5: use alternate method to configure promisc and allmulti modes Adrien Mazarguil
2015-10-30 18:55 ` [dpdk-dev] [PATCH v2 08/16] mlx5: add RSS hash update/get Adrien Mazarguil
2015-10-30 18:55 ` [dpdk-dev] [PATCH v2 09/16] mlx5: use one RSS hash key per flow type Adrien Mazarguil
2015-10-30 18:55 ` [dpdk-dev] [PATCH v2 10/16] app/testpmd: add missing type to RSS hash commands Adrien Mazarguil
2015-10-30 18:55 ` [dpdk-dev] [PATCH v2 11/16] app/testpmd: fix missing initialization in the RSS hash show command Adrien Mazarguil
2015-10-30 18:55 ` [dpdk-dev] [PATCH v2 12/16] mlx5: disable useless flows in promiscuous mode Adrien Mazarguil
2015-10-30 18:55 ` Adrien Mazarguil [this message]
2015-10-30 18:55 ` [dpdk-dev] [PATCH v2 14/16] mlx5: enable multi packet send WR in TX CQ Adrien Mazarguil
2015-10-30 18:55 ` [dpdk-dev] [PATCH v2 15/16] mlx5: fix compilation error with GCC < 4.6 Adrien Mazarguil
2015-10-30 18:55 ` [dpdk-dev] [PATCH v2 16/16] doc: update mlx5 documentation Adrien Mazarguil
2015-11-01 10:26 ` [dpdk-dev] [PATCH v2 00/16] Enhance mlx5 with Mellanox OFED 3.1 Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1446231319-8185-14-git-send-email-adrien.mazarguil@6wind.com \
--to=adrien.mazarguil@6wind.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).