From: Jingjing Wu <jingjing.wu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v3 5/9] ethdev: new API to get dcb related information
Date: Sat, 31 Oct 2015 23:57:27 +0800 [thread overview]
Message-ID: <1446307051-29283-6-git-send-email-jingjing.wu@intel.com> (raw)
In-Reply-To: <1446307051-29283-1-git-send-email-jingjing.wu@intel.com>
This patch adds one new API to get dcb related info.
rte_eth_dev_get_dcb_info
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
---
lib/librte_ether/rte_ethdev.c | 18 ++++++++++++
lib/librte_ether/rte_ethdev.h | 54 ++++++++++++++++++++++++++++++++++
lib/librte_ether/rte_ether_version.map | 7 +++++
3 files changed, 79 insertions(+)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index c7247c3..721cef6 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -3143,3 +3143,21 @@ rte_eth_dev_set_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info)
FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_eeprom, -ENOTSUP);
return (*dev->dev_ops->set_eeprom)(dev, info);
}
+
+int
+rte_eth_dev_get_dcb_info(uint8_t port_id,
+ struct rte_eth_dcb_info *dcb_info)
+{
+ struct rte_eth_dev *dev;
+
+ if (!rte_eth_dev_is_valid_port(port_id)) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return -ENODEV;
+ }
+
+ dev = &rte_eth_devices[port_id];
+ memset(dcb_info, 0, sizeof(struct rte_eth_dcb_info));
+
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_dcb_info, -ENOTSUP);
+ return (*dev->dev_ops->get_dcb_info)(dev, dcb_info);
+}
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 377da6a..2e05189 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -854,6 +854,38 @@ struct rte_eth_xstats {
uint64_t value;
};
+#define ETH_DCB_NUM_TCS 8
+#define ETH_MAX_VMDQ_POOL 64
+
+/**
+ * A structure used to get the information of queue and
+ * TC mapping on both TX and RX paths.
+ */
+struct rte_eth_dcb_tc_queue_mapping {
+ /** rx queues assigned to tc per Pool */
+ struct {
+ uint8_t base;
+ uint8_t nb_queue;
+ } tc_rxq[ETH_MAX_VMDQ_POOL][ETH_DCB_NUM_TCS];
+ /** rx queues assigned to tc per Pool */
+ struct {
+ uint8_t base;
+ uint8_t nb_queue;
+ } tc_txq[ETH_MAX_VMDQ_POOL][ETH_DCB_NUM_TCS];
+};
+
+/**
+ * A structure used to get the information of DCB.
+ * It includes TC UP mapping and queue TC mapping.
+ */
+struct rte_eth_dcb_info {
+ uint8_t nb_tcs; /**< number of TCs */
+ uint8_t prio_tc[ETH_DCB_NUM_USER_PRIORITIES]; /**< Priority to tc */
+ uint8_t tc_bws[ETH_DCB_NUM_TCS]; /**< TX BW percentage for each TC */
+ /** rx queues assigned to tc */
+ struct rte_eth_dcb_tc_queue_mapping tc_queue;
+};
+
struct rte_eth_dev;
struct rte_eth_dev_callback;
@@ -1207,6 +1239,10 @@ typedef int (*eth_filter_ctrl_t)(struct rte_eth_dev *dev,
void *arg);
/**< @internal Take operations to assigned filter type on an Ethernet device */
+typedef int (*eth_get_dcb_info)(struct rte_eth_dev *dev,
+ struct rte_eth_dcb_info *dcb_info);
+/**< @internal Get dcb information on an Ethernet device */
+
/**
* @internal A structure containing the functions exported by an Ethernet driver.
*/
@@ -1312,6 +1348,9 @@ struct eth_dev_ops {
eth_timesync_read_rx_timestamp_t timesync_read_rx_timestamp;
/** Read the IEEE1588/802.1AS TX timestamp. */
eth_timesync_read_tx_timestamp_t timesync_read_tx_timestamp;
+
+ /** Get DCB information */
+ eth_get_dcb_info get_dcb_info;
};
/**
@@ -3321,6 +3360,21 @@ int rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
enum rte_filter_op filter_op, void *arg);
/**
+ * Get DCB information on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param dcb_info
+ * dcb information.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support.
+ */
+int rte_eth_dev_get_dcb_info(uint8_t port_id,
+ struct rte_eth_dcb_info *dcb_info);
+
+/**
* Add a callback to be called on packet RX on a given port and queue.
*
* This API configures a function to be called for each burst of
diff --git a/lib/librte_ether/rte_ether_version.map b/lib/librte_ether/rte_ether_version.map
index 8345a6c..3c4dc2d 100644
--- a/lib/librte_ether/rte_ether_version.map
+++ b/lib/librte_ether/rte_ether_version.map
@@ -127,3 +127,10 @@ DPDK_2.1 {
rte_eth_timesync_read_tx_timestamp;
} DPDK_2.0;
+
+DPDK_2.2 {
+ global:
+
+ rte_eth_dev_get_dcb_info;
+
+} DPDK_2.1;
--
2.4.0
next prev parent reply other threads:[~2015-10-31 15:57 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-24 6:03 [dpdk-dev] [PATCH 0/8] enable DCB feature on Intel XL710/X710 NIC Jingjing Wu
2015-09-24 6:03 ` [dpdk-dev] [PATCH 1/8] ethdev: rename dcb_queue to dcb_tc in dcb config struct Jingjing Wu
2015-09-24 6:03 ` [dpdk-dev] [PATCH 2/8] ethdev: move the multi-queue checking to specific drivers Jingjing Wu
2015-09-24 6:03 ` [dpdk-dev] [PATCH 3/8] i40e: enable DCB feature on FVL Jingjing Wu
2015-09-24 6:03 ` [dpdk-dev] [PATCH 4/8] ixgbe: enable DCB+RSS multi-queue mode Jingjing Wu
2015-09-24 6:03 ` [dpdk-dev] [PATCH 5/8] ethdev: new API to get dcb related information Jingjing Wu
2015-09-24 6:03 ` [dpdk-dev] [PATCH 6/8] ixgbe: get_dcb_info ops implement Jingjing Wu
2015-09-24 6:03 ` [dpdk-dev] [PATCH 7/8] i40e: " Jingjing Wu
2015-10-22 7:10 ` Liu, Jijiang
2015-10-26 7:38 ` Wu, Jingjing
2015-09-24 6:03 ` [dpdk-dev] [PATCH 8/8] app/testpmd: set up DCB forwarding based on traffic class Jingjing Wu
2015-10-28 1:46 ` Liu, Jijiang
2015-10-28 2:04 ` Wu, Jingjing
2015-10-29 8:53 ` [dpdk-dev] [PATCH v2 00/10] enable DCB feature on Intel XL710/X710 NIC Jingjing Wu
2015-10-29 8:53 ` [dpdk-dev] [PATCH v2 01/10] ethdev: rename dcb_queue to dcb_tc in dcb config struct Jingjing Wu
2015-10-30 10:22 ` Thomas Monjalon
2015-10-29 8:53 ` [dpdk-dev] [PATCH v2 02/10] ethdev: move the multi-queue checking to specific drivers Jingjing Wu
2015-10-29 8:53 ` [dpdk-dev] [PATCH v2 03/10] i40e: enable DCB feature on FVL Jingjing Wu
2015-10-29 8:53 ` [dpdk-dev] [PATCH v2 04/10] ixgbe: enable DCB+RSS multi-queue mode Jingjing Wu
2015-10-29 8:53 ` [dpdk-dev] [PATCH v2 05/10] ethdev: new API to get dcb related information Jingjing Wu
2015-10-30 11:16 ` Thomas Monjalon
2015-10-29 8:53 ` [dpdk-dev] [PATCH v2 06/10] ixgbe: get_dcb_info ops implement Jingjing Wu
2015-10-29 8:53 ` [dpdk-dev] [PATCH v2 07/10] i40e: " Jingjing Wu
2015-10-29 8:53 ` [dpdk-dev] [PATCH v2 08/10] app/testpmd: set up DCB forwarding based on traffic class Jingjing Wu
2015-10-29 8:53 ` [dpdk-dev] [PATCH v2 09/10] app/testpmd: add command to display DCB info Jingjing Wu
2015-10-29 8:53 ` [dpdk-dev] [PATCH v2 10/10] doc: update testpmd guide and release note Jingjing Wu
2015-10-30 10:26 ` Thomas Monjalon
2015-10-30 1:29 ` [dpdk-dev] [PATCH v2 00/10] enable DCB feature on Intel XL710/X710 NIC Liu, Jijiang
2015-10-30 2:21 ` Zhang, Helin
2015-10-31 15:57 ` [dpdk-dev] [PATCH v3 0/9] " Jingjing Wu
2015-10-31 15:57 ` [dpdk-dev] [PATCH v3 1/9] ethdev: rename dcb_queue to dcb_tc in dcb config struct Jingjing Wu
2015-10-31 15:57 ` [dpdk-dev] [PATCH v3 2/9] ethdev: move the multi-queue checking to specific drivers Jingjing Wu
2015-10-31 15:57 ` [dpdk-dev] [PATCH v3 3/9] i40e: enable DCB feature on FVL Jingjing Wu
2015-10-31 15:57 ` [dpdk-dev] [PATCH v3 4/9] ixgbe: enable DCB+RSS multi-queue mode Jingjing Wu
2015-10-31 15:57 ` Jingjing Wu [this message]
2015-10-31 15:57 ` [dpdk-dev] [PATCH v3 6/9] ixgbe: get_dcb_info ops implement Jingjing Wu
2015-10-31 15:57 ` [dpdk-dev] [PATCH v3 7/9] i40e: " Jingjing Wu
2015-10-31 15:57 ` [dpdk-dev] [PATCH v3 8/9] app/testpmd: set up DCB forwarding based on traffic class Jingjing Wu
2015-10-31 15:57 ` [dpdk-dev] [PATCH v3 9/9] app/testpmd: add command to display DCB info Jingjing Wu
2015-11-01 13:53 ` [dpdk-dev] [PATCH v3 0/9] enable DCB feature on Intel XL710/X710 NIC Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1446307051-29283-6-git-send-email-jingjing.wu@intel.com \
--to=jingjing.wu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).