DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Alejandro.Lucero" <alejandro.lucero@netronome.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v5 5/9] nfp: adding link functionality
Date: Mon,  2 Nov 2015 12:25:25 +0000	[thread overview]
Message-ID: <1446467130-300-6-git-send-email-alejandro.lucero@netronome.com> (raw)
In-Reply-To: <1446467130-300-1-git-send-email-alejandro.lucero@netronome.com>

From: "Alejandro.Lucero" <alejandro.lucero@netronome.com>

Signed-off-by: Alejandro.Lucero <alejandro.lucero@netronome.com>
Signed-off-by: Rolf.Neugebauer <rolf.neugebauer@netronome.com>
---
 drivers/net/nfp/nfp_net.c |   94 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 94 insertions(+)

diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
index e1badc3..9cc7776 100644
--- a/drivers/net/nfp/nfp_net.c
+++ b/drivers/net/nfp/nfp_net.c
@@ -232,6 +232,57 @@ ring_dma_zone_reserve(struct rte_eth_dev *dev, const char *ring_name,
 					   NFP_MEMZONE_ALIGN);
 }
 
+/*
+ * Atomically reads link status information from global structure rte_eth_dev.
+ *
+ * @param dev
+ *   - Pointer to the structure rte_eth_dev to read from.
+ *   - Pointer to the buffer to be saved with the link status.
+ *
+ * @return
+ *   - On success, zero.
+ *   - On failure, negative value.
+ */
+static inline int
+nfp_net_dev_atomic_read_link_status(struct rte_eth_dev *dev,
+				    struct rte_eth_link *link)
+{
+	struct rte_eth_link *dst = link;
+	struct rte_eth_link *src = &dev->data->dev_link;
+
+	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
+				*(uint64_t *)src) == 0)
+		return -1;
+
+	return 0;
+}
+
+/*
+ * Atomically writes the link status information into global
+ * structure rte_eth_dev.
+ *
+ * @param dev
+ *   - Pointer to the structure rte_eth_dev to read from.
+ *   - Pointer to the buffer to be saved with the link status.
+ *
+ * @return
+ *   - On success, zero.
+ *   - On failure, negative value.
+ */
+static inline int
+nfp_net_dev_atomic_write_link_status(struct rte_eth_dev *dev,
+				     struct rte_eth_link *link)
+{
+	struct rte_eth_link *dst = &dev->data->dev_link;
+	struct rte_eth_link *src = link;
+
+	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
+				*(uint64_t *)src) == 0)
+		return -1;
+
+	return 0;
+}
+
 static void
 nfp_net_rx_queue_release_mbufs(struct nfp_net_rxq *rxq)
 {
@@ -688,6 +739,49 @@ nfp_net_close(struct rte_eth_dev *dev)
 	 */
 }
 
+/*
+ * return 0 means link status changed, -1 means not changed
+ *
+ * Wait to complete is needed as it can take up to 9 seconds to get the Link
+ * status.
+ */
+static int
+nfp_net_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complete)
+{
+	struct nfp_net_hw *hw;
+	struct rte_eth_link link, old;
+	uint32_t nn_link_status;
+
+	PMD_DRV_LOG(DEBUG, "Link update\n");
+
+	hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+	memset(&old, 0, sizeof(old));
+	nfp_net_dev_atomic_read_link_status(dev, &old);
+
+	nn_link_status = nn_cfg_readl(hw, NFP_NET_CFG_STS);
+
+	memset(&link, 0, sizeof(struct rte_eth_link));
+
+	if (nn_link_status & NFP_NET_CFG_STS_LINK)
+		link.link_status = 1;
+
+	link.link_duplex = ETH_LINK_FULL_DUPLEX;
+	/* Other cards can limit the tx and rx rate per VF */
+	link.link_speed = ETH_LINK_SPEED_40G;
+
+	if (old.link_status != link.link_status) {
+		nfp_net_dev_atomic_write_link_status(dev, &link);
+		if (link.link_status)
+			PMD_DRV_LOG(INFO, "NIC Link is Up\n");
+		else
+			PMD_DRV_LOG(INFO, "NIC Link is Down\n");
+		return 0;
+	}
+
+	return -1;
+}
+
 static void
 nfp_net_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
 {
-- 
1.7.9.5

  parent reply	other threads:[~2015-11-02 12:25 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-02 12:25 [dpdk-dev] [PATCH v5 0/9] support for netronome nfp-6xxx card Alejandro.Lucero
2015-11-02 12:25 ` [dpdk-dev] [PATCH v5 1/9] nfp: basic initialization for netronome´s " Alejandro.Lucero
2015-11-04 15:05   ` Thomas Monjalon
2015-11-02 12:25 ` [dpdk-dev] [PATCH v5 2/9] nfp: rx/tx functionality Alejandro.Lucero
2015-11-02 12:25 ` [dpdk-dev] [PATCH v5 3/9] nfp: adding rss functionality Alejandro.Lucero
2015-11-02 12:25 ` [dpdk-dev] [PATCH v5 4/9] nfp: adding stats functionality Alejandro.Lucero
2015-11-02 12:25 ` Alejandro.Lucero [this message]
2015-11-02 12:25 ` [dpdk-dev] [PATCH v5 6/9] nfp: adding functionality to pmd Alejandro.Lucero
2015-11-02 12:25 ` [dpdk-dev] [PATCH v5 7/9] nfp: integration with dpdk build system Alejandro.Lucero
2015-11-02 12:25 ` [dpdk-dev] [PATCH v5 8/9] nfp: adding nic guide Alejandro.Lucero
2015-11-04 15:03   ` Thomas Monjalon
2015-11-04 15:41     ` Alejandro Lucero
2015-11-02 12:25 ` [dpdk-dev] [PATCH v5 9/9] nfp: adding maintainers and release info Alejandro.Lucero

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1446467130-300-6-git-send-email-alejandro.lucero@netronome.com \
    --to=alejandro.lucero@netronome.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).