From: Cunming Liang <cunming.liang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v4 02/13] ixgbe: reserve intr vector zero for misc cause
Date: Wed, 4 Nov 2015 16:45:29 +0800 [thread overview]
Message-ID: <1446626740-28824-3-git-send-email-cunming.liang@intel.com> (raw)
In-Reply-To: <1446626740-28824-1-git-send-email-cunming.liang@intel.com>
According to the VFIO interrupt mapping, the interrupt vector id for rxq starts from RX_VEC_START.
It doesn't impact the UIO cases.
v3 changes:
- macro renaming according to the EAL change
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
---
drivers/net/ixgbe/ixgbe_ethdev.c | 22 ++++++++++++++--------
drivers/net/ixgbe/ixgbe_ethdev.h | 3 +++
2 files changed, 17 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 25966ef..153ba98 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -4478,7 +4478,8 @@ ixgbevf_dev_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id)
IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
mask = IXGBE_READ_REG(hw, IXGBE_VTEIMS);
- mask |= (1 << queue_id);
+ mask |= (1 << IXGBE_MISC_VEC_ID);
+ RTE_SET_USED(queue_id);
IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, mask);
rte_intr_enable(&dev->pci_dev->intr_handle);
@@ -4494,7 +4495,8 @@ ixgbevf_dev_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id)
IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
mask = IXGBE_READ_REG(hw, IXGBE_VTEIMS);
- mask &= ~(1 << queue_id);
+ mask &= ~(1 << IXGBE_MISC_VEC_ID);
+ RTE_SET_USED(queue_id);
IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, mask);
return 0;
@@ -4630,7 +4632,7 @@ ixgbevf_configure_msix(struct rte_eth_dev *dev)
struct ixgbe_hw *hw =
IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t q_idx;
- uint32_t vector_idx = 0;
+ uint32_t vector_idx = IXGBE_MISC_VEC_ID;
/* won't configure msix register if no mapping is done
* between intr vector and event fd.
@@ -4662,7 +4664,8 @@ ixgbe_configure_msix(struct rte_eth_dev *dev)
struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
struct ixgbe_hw *hw =
IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- uint32_t queue_id, vec = 0;
+ uint32_t queue_id, base = IXGBE_MISC_VEC_ID;
+ uint32_t vec = IXGBE_MISC_VEC_ID;
uint32_t mask;
uint32_t gpie;
@@ -4672,6 +4675,9 @@ ixgbe_configure_msix(struct rte_eth_dev *dev)
if (!rte_intr_dp_is_en(intr_handle))
return;
+ if (rte_intr_allow_others(intr_handle))
+ vec = base = IXGBE_RX_VEC_START;
+
/* setup GPIE for MSI-x mode */
gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
gpie |= IXGBE_GPIE_MSIX_MODE | IXGBE_GPIE_PBA_SUPPORT |
@@ -4695,23 +4701,23 @@ ixgbe_configure_msix(struct rte_eth_dev *dev)
/* by default, 1:1 mapping */
ixgbe_set_ivar_map(hw, 0, queue_id, vec);
intr_handle->intr_vec[queue_id] = vec;
- if (vec < intr_handle->nb_efd - 1)
+ if (vec < base + intr_handle->nb_efd - 1)
vec++;
}
switch (hw->mac.type) {
case ixgbe_mac_82598EB:
ixgbe_set_ivar_map(hw, -1, IXGBE_IVAR_OTHER_CAUSES_INDEX,
- intr_handle->max_intr - 1);
+ IXGBE_MISC_VEC_ID);
break;
case ixgbe_mac_82599EB:
case ixgbe_mac_X540:
- ixgbe_set_ivar_map(hw, -1, 1, intr_handle->max_intr - 1);
+ ixgbe_set_ivar_map(hw, -1, 1, IXGBE_MISC_VEC_ID);
break;
default:
break;
}
- IXGBE_WRITE_REG(hw, IXGBE_EITR(queue_id),
+ IXGBE_WRITE_REG(hw, IXGBE_EITR(IXGBE_MISC_VEC_ID),
IXGBE_MIN_INTER_INTERRUPT_INTERVAL_DEFAULT & 0xFFF);
/* set up to autoclear timer, and the vectors */
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
index 569d678..1856c42 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.h
+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
@@ -123,6 +123,9 @@
#define IXGBE_VF_IRQ_ENABLE_MASK 3 /* vf irq enable mask */
#define IXGBE_VF_MAXMSIVECTOR 1
+#define IXGBE_MISC_VEC_ID RTE_INTR_VEC_ZERO_OFFSET
+#define IXGBE_RX_VEC_START RTE_INTR_VEC_RXTX_OFFSET
+
/*
* Information about the fdir mode.
*/
--
2.4.3
next prev parent reply other threads:[~2015-11-04 8:45 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-24 5:33 [dpdk-dev] [PATCH v1 00/11] interrupt mode for i40e Cunming Liang
2015-09-24 5:33 ` [dpdk-dev] [PATCH v1 01/11] eal/linux: vfio map misc intr to vector zero Cunming Liang
2015-09-24 5:33 ` [dpdk-dev] [PATCH v1 02/11] ixgbe: reserve intr vector zero for misc cause Cunming Liang
2015-09-24 5:33 ` [dpdk-dev] [PATCH v1 03/11] igb: " Cunming Liang
2015-09-24 5:33 ` [dpdk-dev] [PATCH v1 04/11] eal/linux: not allow to enable zero intr efd Cunming Liang
2015-09-24 5:33 ` [dpdk-dev] [PATCH v1 05/11] eal/linux: add intr api to report multi-vector capability Cunming Liang
2015-09-24 5:33 ` [dpdk-dev] [PATCH v1 06/11] ixgbe: fix rx intr compatible issue with PF mbox Cunming Liang
2015-11-02 16:03 ` David Marchand
2015-11-02 16:09 ` Ananyev, Konstantin
2015-11-02 16:22 ` David Marchand
[not found] ` <2601191342CEEE43887BDE71AB97725836AB862D@irsmsx105.ger.corp.intel.com>
2015-11-02 16:41 ` Ananyev, Konstantin
2015-11-02 17:06 ` David Marchand
2015-11-02 17:23 ` Ananyev, Konstantin
2015-11-02 17:45 ` David Marchand
2015-09-24 5:33 ` [dpdk-dev] [PATCH v1 07/11] ixgbevf: cleanup unnecessary interrupt handler Cunming Liang
2015-09-24 5:33 ` [dpdk-dev] [PATCH v1 08/11] igb: fix rx intr compatible issue with PF mbox Cunming Liang
2015-09-24 5:33 ` [dpdk-dev] [PATCH v1 09/11] i40e: add rx interrupt support Cunming Liang
2015-09-24 5:33 ` [dpdk-dev] [PATCH v1 10/11] i40evf: " Cunming Liang
2015-09-24 5:33 ` [dpdk-dev] [PATCH v1 11/11] doc: release note update for intr mode Cunming Liang
2015-10-30 5:27 ` [dpdk-dev] [PATCH v2 00/11] interrupt mode for i40e Cunming Liang
2015-10-30 5:27 ` [dpdk-dev] [PATCH v2 01/11] eal/linux: vfio map misc intr to vector zero Cunming Liang
2015-10-30 7:11 ` He, Shaopeng
2015-10-30 7:33 ` Zhang, Helin
2015-10-30 14:22 ` Liang, Cunming
2015-11-02 15:53 ` David Marchand
2015-11-04 1:17 ` Liang, Cunming
2015-11-04 6:07 ` [dpdk-dev] [PATCH v3 00/13] interrupt mode for i40e Cunming Liang
2015-11-04 6:07 ` [dpdk-dev] [PATCH v3 01/13] eal: vfio map misc intr to vector zero Cunming Liang
2015-11-04 6:07 ` [dpdk-dev] [PATCH v3 02/13] ixgbe: reserve intr vector zero for misc cause Cunming Liang
2015-11-04 6:07 ` [dpdk-dev] [PATCH v3 03/13] igb: " Cunming Liang
2015-11-04 6:07 ` [dpdk-dev] [PATCH v3 04/13] eal/linux: not allow to enable zero intr efd Cunming Liang
2015-11-04 6:07 ` [dpdk-dev] [PATCH v3 05/13] ixgbe: fix efd_enable with zero number Cunming Liang
2015-11-04 6:07 ` [dpdk-dev] [PATCH v3 06/13] igb: " Cunming Liang
2015-11-04 6:07 ` [dpdk-dev] [PATCH v3 07/13] eal: add intr api to report multi-vector capability Cunming Liang
2015-11-04 6:07 ` [dpdk-dev] [PATCH v3 08/13] ixgbe: fix rx intr compatible issue with PF mbox Cunming Liang
2015-11-04 6:07 ` [dpdk-dev] [PATCH v3 09/13] ixgbe: fix unnecessary intr_vec free in dev_close Cunming Liang
2015-11-04 6:07 ` [dpdk-dev] [PATCH v3 10/13] ixgbevf: cleanup unnecessary interrupt handler Cunming Liang
2015-11-04 6:07 ` [dpdk-dev] [PATCH v3 11/13] igb: fix rx intr compatible issue with PF mbox Cunming Liang
2015-11-04 6:07 ` [dpdk-dev] [PATCH v3 12/13] i40e: add rx interrupt support Cunming Liang
2015-11-04 6:07 ` [dpdk-dev] [PATCH v3 13/13] i40evf: " Cunming Liang
2015-11-04 8:45 ` [dpdk-dev] [PATCH v4 00/13] interrupt mode for i40e Cunming Liang
2015-11-04 8:45 ` [dpdk-dev] [PATCH v4 01/13] eal: vfio map misc intr to vector zero Cunming Liang
2015-11-04 13:06 ` David Marchand
2015-11-04 8:45 ` Cunming Liang [this message]
2015-11-04 8:45 ` [dpdk-dev] [PATCH v4 03/13] igb: reserve intr vector zero for misc cause Cunming Liang
2015-11-04 8:45 ` [dpdk-dev] [PATCH v4 04/13] eal/linux: not allow to enable zero intr efd Cunming Liang
2015-11-04 13:06 ` David Marchand
2015-11-04 8:45 ` [dpdk-dev] [PATCH v4 05/13] ixgbe: fix efd_enable with zero number Cunming Liang
2015-11-04 8:45 ` [dpdk-dev] [PATCH v4 06/13] igb: " Cunming Liang
2015-11-04 8:45 ` [dpdk-dev] [PATCH v4 07/13] eal: add intr api to report multi-vector capability Cunming Liang
2015-11-04 13:07 ` David Marchand
2015-11-04 8:45 ` [dpdk-dev] [PATCH v4 08/13] ixgbe: fix rx intr compatible issue with PF mbox Cunming Liang
2015-11-04 8:45 ` [dpdk-dev] [PATCH v4 09/13] ixgbe: fix unnecessary intr_vec free in dev_close Cunming Liang
2015-11-04 8:45 ` [dpdk-dev] [PATCH v4 10/13] ixgbevf: cleanup unnecessary interrupt handler Cunming Liang
2015-11-04 8:45 ` [dpdk-dev] [PATCH v4 11/13] igb: fix rx intr compatible issue with PF mbox Cunming Liang
2015-11-04 8:45 ` [dpdk-dev] [PATCH v4 12/13] i40e: add rx interrupt support Cunming Liang
2015-11-04 8:45 ` [dpdk-dev] [PATCH v4 13/13] i40evf: " Cunming Liang
2015-11-04 14:29 ` [dpdk-dev] [PATCH v4 00/13] interrupt mode for i40e Thomas Monjalon
2015-10-30 5:27 ` [dpdk-dev] [PATCH v2 02/11] ixgbe: reserve intr vector zero for misc cause Cunming Liang
2015-10-30 5:27 ` [dpdk-dev] [PATCH v2 03/11] igb: " Cunming Liang
2015-10-30 5:27 ` [dpdk-dev] [PATCH v2 04/11] eal/linux: not allow to enable zero intr efd Cunming Liang
2015-10-30 7:11 ` He, Shaopeng
2015-10-30 5:27 ` [dpdk-dev] [PATCH v2 05/11] eal/linux: add intr api to report multi-vector capability Cunming Liang
2015-10-30 7:13 ` He, Shaopeng
2015-11-02 15:59 ` David Marchand
2015-11-04 1:21 ` Liang, Cunming
2015-10-30 5:27 ` [dpdk-dev] [PATCH v2 06/11] ixgbe: fix rx intr compatible issue with PF mbox Cunming Liang
2015-10-30 5:27 ` [dpdk-dev] [PATCH v2 07/11] ixgbevf: cleanup unnecessary interrupt handler Cunming Liang
2015-11-02 16:06 ` David Marchand
2015-11-04 1:37 ` Liang, Cunming
2015-10-30 5:27 ` [dpdk-dev] [PATCH v2 08/11] igb: fix rx intr compatible issue with PF mbox Cunming Liang
2015-10-30 5:27 ` [dpdk-dev] [PATCH v2 09/11] i40e: add rx interrupt support Cunming Liang
2015-10-30 7:33 ` Zhang, Helin
2015-10-30 7:35 ` Wu, Jingjing
2015-10-30 5:27 ` [dpdk-dev] [PATCH v2 10/11] i40evf: " Cunming Liang
2015-10-30 7:36 ` Wu, Jingjing
2015-10-30 7:38 ` Zhang, Helin
2015-10-30 5:27 ` [dpdk-dev] [PATCH 11/11] doc: release note update for intr mode Cunming Liang
2015-10-30 8:21 ` [dpdk-dev] [PATCH v2 00/11] interrupt mode for i40e Zhang, Helin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1446626740-28824-3-git-send-email-cunming.liang@intel.com \
--to=cunming.liang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).