DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jijiang Liu <jijiang.liu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v3 8/8] examples/vhost:support TX offload in vhost sample
Date: Wed,  4 Nov 2015 18:54:16 +0800	[thread overview]
Message-ID: <1446634456-413-9-git-send-email-jijiang.liu@intel.com> (raw)
In-Reply-To: <1446634456-413-1-git-send-email-jijiang.liu@intel.com>

Change the vhost sample to support and test TX offload.

Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
 examples/vhost/main.c |  128 ++++++++++++++++++++++++++++++++++++++++++-------
 1 files changed, 111 insertions(+), 17 deletions(-)

diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index 9eac2d0..06e1e8b 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -50,6 +50,10 @@
 #include <rte_string_fns.h>
 #include <rte_malloc.h>
 #include <rte_virtio_net.h>
+#include <rte_tcp.h>
+#include <rte_ip.h>
+#include <rte_udp.h>
+#include <rte_sctp.h>
 
 #include "main.h"
 
@@ -140,6 +144,8 @@
 
 #define MBUF_EXT_MEM(mb)   (rte_mbuf_from_indirect(mb) != (mb))
 
+#define VIRTIO_TX_CKSUM_OFFLOAD_MASK (PKT_TX_IP_CKSUM | PKT_TX_L4_MASK)
+
 /* mask of enabled ports */
 static uint32_t enabled_port_mask = 0;
 
@@ -197,6 +203,13 @@ typedef enum {
 static uint32_t enable_stats = 0;
 /* Enable retries on RX. */
 static uint32_t enable_retry = 1;
+
+/* Disable TX checksum offload */
+static uint32_t enable_tx_csum;
+
+/* Disable TSO offload */
+static uint32_t enable_tso;
+
 /* Specify timeout (in useconds) between retries on RX. */
 static uint32_t burst_rx_delay_time = BURST_RX_WAIT_US;
 /* Specify the number of retries on RX. */
@@ -292,20 +305,6 @@ struct vlan_ethhdr {
 	__be16          h_vlan_encapsulated_proto;
 };
 
-/* IPv4 Header */
-struct ipv4_hdr {
-	uint8_t  version_ihl;		/**< version and header length */
-	uint8_t  type_of_service;	/**< type of service */
-	uint16_t total_length;		/**< length of packet */
-	uint16_t packet_id;		/**< packet ID */
-	uint16_t fragment_offset;	/**< fragmentation offset */
-	uint8_t  time_to_live;		/**< time to live */
-	uint8_t  next_proto_id;		/**< protocol ID */
-	uint16_t hdr_checksum;		/**< header checksum */
-	uint32_t src_addr;		/**< source address */
-	uint32_t dst_addr;		/**< destination address */
-} __attribute__((__packed__));
-
 /* Header lengths. */
 #define VLAN_HLEN       4
 #define VLAN_ETH_HLEN   18
@@ -441,6 +440,14 @@ port_init(uint8_t port)
 
 	if (port >= rte_eth_dev_count()) return -1;
 
+	if (enable_tx_csum == 0)
+		rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_CSUM);
+
+	if (enable_tso == 0) {
+		rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_HOST_TSO4);
+		rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_HOST_TSO6);
+	}
+
 	rx_rings = (uint16_t)dev_info.max_rx_queues;
 	/* Configure ethernet device. */
 	retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
@@ -576,7 +583,9 @@ us_vhost_usage(const char *prgname)
 	"		--rx-desc-num [0-N]: the number of descriptors on rx, "
 			"used only when zero copy is enabled.\n"
 	"		--tx-desc-num [0-N]: the number of descriptors on tx, "
-			"used only when zero copy is enabled.\n",
+			"used only when zero copy is enabled.\n"
+	"		--tx-csum [0|1] disable/enable TX checksum offload.\n"
+	"		--tso [0|1] disable/enable TCP segement offload.\n",
 	       prgname);
 }
 
@@ -602,6 +611,8 @@ us_vhost_parse_args(int argc, char **argv)
 		{"zero-copy", required_argument, NULL, 0},
 		{"rx-desc-num", required_argument, NULL, 0},
 		{"tx-desc-num", required_argument, NULL, 0},
+		{"tx-csum", required_argument, NULL, 0},
+		{"tso", required_argument, NULL, 0},
 		{NULL, 0, 0, 0},
 	};
 
@@ -656,6 +667,28 @@ us_vhost_parse_args(int argc, char **argv)
 				}
 			}
 
+			/* Enable/disable TX checksum offload. */
+			if (!strncmp(long_option[option_index].name, "tx-csum", MAX_LONG_OPT_SZ)) {
+				ret = parse_num_opt(optarg, 1);
+				if (ret == -1) {
+					RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for tx-csum [0|1]\n");
+					us_vhost_usage(prgname);
+					return -1;
+				} else
+					enable_tx_csum = ret;
+			}
+
+			/* Enable/disable TSO offload. */
+			if (!strncmp(long_option[option_index].name, "tso", MAX_LONG_OPT_SZ)) {
+				ret = parse_num_opt(optarg, 1);
+				if (ret == -1) {
+					RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for tso [0|1]\n");
+					us_vhost_usage(prgname);
+					return -1;
+				} else
+					enable_tso = ret;
+			}
+
 			/* Specify the retries delay time (in useconds) on RX. */
 			if (!strncmp(long_option[option_index].name, "rx-retry-delay", MAX_LONG_OPT_SZ)) {
 				ret = parse_num_opt(optarg, INT32_MAX);
@@ -1114,6 +1147,63 @@ find_local_dest(struct virtio_net *dev, struct rte_mbuf *m,
 	return 0;
 }
 
+static uint16_t
+get_psd_sum(void *l3_hdr, uint64_t ol_flags)
+{
+	if (ol_flags & PKT_TX_IPV4)
+		return rte_ipv4_phdr_cksum(l3_hdr, ol_flags);
+	else /* assume ethertype == ETHER_TYPE_IPv6 */
+		return rte_ipv6_phdr_cksum(l3_hdr, ol_flags);
+}
+
+static void virtio_tx_offload(struct rte_mbuf *m)
+{
+	void *l3_hdr;
+	struct ipv4_hdr *ipv4_hdr = NULL;
+	struct tcp_hdr *tcp_hdr = NULL;
+	struct udp_hdr *udp_hdr = NULL;
+	struct sctp_hdr *sctp_hdr = NULL;
+	struct ether_hdr *eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+
+	l3_hdr = (char *)eth_hdr + m->l2_len;
+
+	if (m->ol_flags & PKT_TX_IPV4) {
+		ipv4_hdr = (struct ipv4_hdr *)l3_hdr;
+		if (m->ol_flags & PKT_TX_IP_CKSUM)
+			ipv4_hdr->hdr_checksum = 0;
+	}
+
+	if (m->ol_flags & PKT_TX_L4_MASK) {
+		switch (m->ol_flags & PKT_TX_L4_MASK) {
+		case PKT_TX_TCP_CKSUM:
+			tcp_hdr = (struct tcp_hdr *)
+					((char *)l3_hdr + m->l3_len);
+			tcp_hdr->cksum = get_psd_sum(l3_hdr, m->ol_flags);
+			break;
+		case PKT_TX_UDP_CKSUM:
+			udp_hdr = (struct udp_hdr *)
+					((char *)l3_hdr + m->l3_len);
+			udp_hdr->dgram_cksum = get_psd_sum(l3_hdr, m->ol_flags);
+			break;
+		case PKT_TX_SCTP_CKSUM:
+			sctp_hdr = (struct sctp_hdr *)
+					((char *)l3_hdr + m->l3_len);
+			sctp_hdr->cksum = 0;
+			break;
+		default:
+			break;
+		}
+	}
+
+	if (m->tso_segsz != 0) {
+		ipv4_hdr = (struct ipv4_hdr *)l3_hdr;
+		tcp_hdr = (struct tcp_hdr *)((char *)l3_hdr + m->l3_len);
+		m->ol_flags |= PKT_TX_IP_CKSUM;
+		ipv4_hdr->hdr_checksum = 0;
+		tcp_hdr->cksum = get_psd_sum(l3_hdr, m->ol_flags);
+	}
+}
+
 /*
  * This function routes the TX packet to the correct interface. This may be a local device
  * or the physical port.
@@ -1156,7 +1246,7 @@ virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m, uint16_t vlan_tag)
 			(vh->vlan_tci != vlan_tag_be))
 			vh->vlan_tci = vlan_tag_be;
 	} else {
-		m->ol_flags = PKT_TX_VLAN_PKT;
+		m->ol_flags |= PKT_TX_VLAN_PKT;
 
 		/*
 		 * Find the right seg to adjust the data len when offset is
@@ -1180,6 +1270,10 @@ virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m, uint16_t vlan_tag)
 		m->vlan_tci = vlan_tag;
 	}
 
+	if ((m->ol_flags & VIRTIO_TX_CKSUM_OFFLOAD_MASK) ||
+		(m->ol_flags & PKT_TX_TCP_SEG))
+		virtio_tx_offload(m);
+
 	tx_q->m_table[len] = m;
 	len++;
 	if (enable_stats) {
@@ -1841,7 +1935,7 @@ virtio_tx_route_zcp(struct virtio_net *dev, struct rte_mbuf *m,
 		mbuf->buf_physaddr = m->buf_physaddr;
 		mbuf->buf_addr = m->buf_addr;
 	}
-	mbuf->ol_flags = PKT_TX_VLAN_PKT;
+	mbuf->ol_flags |= PKT_TX_VLAN_PKT;
 	mbuf->vlan_tci = vlan_tag;
 	mbuf->l2_len = sizeof(struct ether_hdr);
 	mbuf->l3_len = sizeof(struct ipv4_hdr);
-- 
1.7.7.6

  parent reply	other threads:[~2015-11-04 10:54 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-04 10:54 [dpdk-dev] [PATCH v3 0/8] add vhost TX offload support Jijiang Liu
2015-11-04 10:54 ` [dpdk-dev] [PATCH v3 1/8] driver/virtio:add virtual addr for virtio net header Jijiang Liu
2015-11-04 10:54 ` [dpdk-dev] [PATCH v3 2/8] driver/virtio: record virtual address of " Jijiang Liu
2015-11-04 10:54 ` [dpdk-dev] [PATCH v3 3/8] driver/virtio:add vhost TX checksum support capability in virtio-net Jijiang Liu
2015-11-04 10:54 ` [dpdk-dev] [PATCH v3 4/8] driver/virtio:fill virtio device info for TX offload Jijiang Liu
2015-11-04 10:54 ` [dpdk-dev] [PATCH v3 5/8] driver/virtio:enqueue vhost " Jijiang Liu
2015-11-04 10:54 ` [dpdk-dev] [PATCH v3 6/8] " Jijiang Liu
2015-11-04 11:17   ` Thomas Monjalon
2015-11-04 12:52     ` Liu, Jijiang
2015-11-04 13:18       ` Thomas Monjalon
2015-11-05  8:49         ` Xu, Qian Q
2015-11-05  9:02           ` Thomas Monjalon
2015-11-05 10:44             ` Xu, Qian Q
2015-11-06  8:24               ` Xu, Qian Q
2015-11-04 13:06     ` Liu, Jijiang
2015-11-04 13:08     ` Liu, Jijiang
2015-11-04 13:15       ` Liu, Jijiang
2015-11-04 10:54 ` [dpdk-dev] [PATCH v3 7/8] lib/librte_vhost:dequeue " Jijiang Liu
2015-11-09  4:00   ` Yuanhan Liu
2015-11-09  5:27     ` Liu, Jijiang
2015-11-04 10:54 ` Jijiang Liu [this message]
2015-11-09  4:17   ` [dpdk-dev] [PATCH v3 8/8] examples/vhost:support TX offload in vhost sample Yuanhan Liu
2015-11-09  8:17     ` Liu, Jijiang
2015-11-09  8:51       ` Yuanhan Liu
2015-11-09  8:18     ` Liu, Jijiang
2015-11-11  6:47     ` Liu, Jijiang
2015-11-04 11:14 ` [dpdk-dev] [PATCH v3 0/8] add vhost TX offload support Tan, Jianfeng
2015-11-05 14:24   ` Glynn, Michael J
  -- strict thread matches above, loose matches on Subject: below --
2015-11-04  8:35 Jijiang Liu
2015-11-04  8:35 ` [dpdk-dev] [PATCH v3 8/8] examples/vhost:support TX offload in vhost sample Jijiang Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1446634456-413-9-git-send-email-jijiang.liu@intel.com \
    --to=jijiang.liu@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).