[dpdk-dev] [PATCH] doc: fix examples in netmap compatibility docs

[John McNamara <john.mcnamara@intel.com>]

Fix the examples in the netmap compatibility sample application
docs which referred to the packet_reordering application.

Also fix some minor rst formatting issues.

Reported-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
---
 doc/guides/sample_app_ug/netmap_compatibility.rst | 91 ++++++++++++-----------
 1 file changed, 46 insertions(+), 45 deletions(-)

diff --git a/doc/guides/sample_app_ug/netmap_compatibility.rst b/doc/guides/sample_app_ug/netmap_compatibility.rst
index d86b3e3..41f0518 100644
--- a/doc/guides/sample_app_ug/netmap_compatibility.rst
+++ b/doc/guides/sample_app_ug/netmap_compatibility.rst
@@ -35,13 +35,13 @@ Netmap Compatibility Sample Application
 Introduction
 ------------
 
-The Netmap compatibility library provides a minimal set of APIs to give the ability to programs written against the Netmap APIs
-to be run with minimal changes to their source code,  using the DPDK to perform the actual packet I/O.
+The Netmap compatibility library provides a minimal set of APIs to give programs written against the Netmap APIs
+the ability to be run, with minimal changes to their source code, using the DPDK to perform the actual packet I/O.
 
-Since Netmap applications use regular system calls, like open(), ioctl() and
-mmap() to communicate with the Netmap kernel module performing the packet I/O,
-the compat_netmap library provides a set of similar APIs to use in place of those system calls,
-effectively turning a Netmap application into a DPDK one.
+Since Netmap applications use regular system calls, like ``open()``, ``ioctl()`` and
+``mmap()`` to communicate with the Netmap kernel module performing the packet I/O,
+the ``compat_netmap`` library provides a set of similar APIs to use in place of those system calls,
+effectively turning a Netmap application into a DPDK application.
 
 The provided library is currently minimal and doesn't support all the features that Netmap supports,
 but is enough to run simple applications, such as the bridge example detailed below.
@@ -52,15 +52,17 @@ Please refer to the Netmap distribution for details about Netmap.
 Available APIs
 --------------
 
-The library provides the following drop-in replacements for system calls usually used in Netmap applications:rte_netmap_close()
+The library provides the following drop-in replacements for system calls usually used in Netmap applications:
 
-*   rte_netmap_ioctl()
+* ``rte_netmap_close()``
 
-*   rte_netmap_open()
+* ``rte_netmap_ioctl()``
 
-*   rte_netmap_mmap()
+* ``rte_netmap_open()``
 
-*   rte_netmap_poll()
+* ``rte_netmap_mmap()``
+
+* ``rte_netmap_poll()``
 
 They use the same signature as their libc counterparts, and can be used as drop-in replacements in most cases.
 
@@ -68,26 +70,25 @@ Caveats
 -------
 
 Given the difference between the way Netmap and the DPDK approach packet I/O,
-there are caveats and limitations to be aware of when trying to use the compat_netmap library, the most important of which are listed below.
-Additional caveats are presented in the $RTE_SDK/examples/netmap_compat/README.md file.
-These can change as the library is updated:
+there are caveats and limitations to be aware of when trying to use the ``compat_netmap`` library, the most important of these are listed below.
+These may change as the library is updated:
 
-*   Any system call that can potentially affect file descriptors cannot be used with a descriptor returned by the rte_netmap_open() function.
+*   Any system call that can potentially affect file descriptors cannot be used with a descriptor returned by the ``rte_netmap_open()`` function.
 
 Note that:
 
-*   rte_netmap_mmap() merely returns the address of a DPDK memzone.
-    The address, length, flags, offset, and so on arguments are therefore ignored completely.
+*   The ``rte_netmap_mmap()`` function merely returns the address of a DPDK memzone.
+    The address, length, flags, offset, and other arguments are ignored.
 
-*   rte_netmap_poll() only supports infinite (negative) or zero time outs.
-    It effectively turns calls to the poll() system call made in a Netmap application into polling of the DPDK ports,
+*   The ``rte_netmap_poll()`` function only supports infinite (negative) or zero time outs.
+    It effectively turns calls to the ``poll()`` system call made in a Netmap application into polling of the DPDK ports,
     changing the semantics of the usual POSIX defined poll.
 
-*   Not all of Netmap's features are supported: "host rings",
+*   Not all of Netmap's features are supported: host rings,
     slot flags and so on are not supported or are simply not relevant in the DPDK model.
 
-*   The Netmap manual page states that "a device obtained through /dev/netmap also supports the ioctl supported by network devices".
-    It is not the case with this compatibility layer.
+*   The Netmap manual page states that "*a device obtained through /dev/netmap also supports the ioctl supported by network devices*".
+    This is not the case with this compatibility layer.
 
 *   The Netmap kernel module exposes a sysfs interface to change some internal parameters, such as the size of the shared memory region.
     This interface is not available when using this compatibility layer.
@@ -97,28 +98,28 @@ Porting Netmap Applications
 
 Porting Netmap applications typically involves two major steps:
 
-*   Changing the system calls to use their compat_netmap library counterparts
+*   Changing the system calls to use their ``compat_netmap`` library counterparts.
 
-*   Adding further DPDK initialization code
+*   Adding further DPDK initialization code.
 
-Since the compat_netmap functions have the same signature as the usual libc calls, the change is in most cases trivial.
+Since the ``compat_netmap`` functions have the same signature as the usual libc calls, the change is trivial in most cases.
 
-The usual DPDK initialization code involving rte_eal_init() and rte_eal_pci_probe()
+The usual DPDK initialization code involving ``rte_eal_init()`` and ``rte_eal_pci_probe()``
 has to be added to the Netmap application in the same way it is used in all other DPDK sample applications.
-Please refer to the *DPDK Programmer's Guide* - Rel 1.4 EAR and example source code for details about initialization.
+Please refer to the *DPDK Programmer's Guide* and example source code for details about initialization.
 
 In addition of the regular DPDK initialization code,
-the ported application needs to call initialization functions for the compat_netmap library,
-namely rte_netmap_init() and rte_netmap_init_port().
+the ported application needs to call initialization functions for the ``compat_netmap`` library,
+namely ``rte_netmap_init()`` and ``rte_netmap_init_port()``.
 
-These two initialization functions take compat_netmap specific data structures as parameters:
-struct rte_netmap_conf and struct rte_netmap_port_conf.
-Those structures' fields are Netmap related and are self-explanatory for developers familiar with Netmap.
-They are defined in $RTE_SDK/examples/netmap_compat/ lib/compat_netmap.h.
+These two initialization functions take ``compat_netmap`` specific data structures as parameters:
+``struct rte_netmap_conf`` and ``struct rte_netmap_port_conf``.
+The structures' fields are Netmap related and are self-explanatory for developers familiar with Netmap.
+They are defined in ``$RTE_SDK/examples/netmap_compat/lib/compat_netmap.h``.
 
 The bridge application is an example largely based on the bridge example shipped with the Netmap distribution.
 It shows how a minimal Netmap application with minimal and straightforward source code changes can be run on top of the DPDK.
-Please refer to $RTE_SDK/examples/netmap_compat/bridge/bridge.c for an example of ported application.
+Please refer to ``$RTE_SDK/examples/netmap_compat/bridge/bridge.c`` for an example of a ported application.
 
 Compiling the "bridge" Sample Application
 -----------------------------------------
@@ -136,7 +137,7 @@ Compiling the "bridge" Sample Application
 
         export RTE_TARGET=x86_64-native-linuxapp-gcc
 
-    See the *DPDK Getting Started Guide* for possible RTE_TARGET values.
+    See the *DPDK Getting Started Guide for Linux* for possible ``RTE_TARGET`` values.
 
 #.  Build the application:
 
@@ -151,24 +152,24 @@ The application requires a single command line option:
 
 .. code-block:: console
 
-    ./build/packet_ordering [EAL options] -- -p PORT_A [-p PORT_B]
+    ./build/bridge [EAL options] -- -i INTERFACE_A [-i INTERFACE_B]
 
 where,
 
-*   -p INTERFACE is the number of a valid DPDK port to use.
+*   ``-i INTERFACE``: Interface (DPDK port number) to use.
 
-    If a single -p parameter is given, the interface will send back all the traffic it receives.
-    If two -p parameters are given, the two interfaces form a bridge,
-    where traffic received on one interface is replicated and sent by the other interface.
+    If a single ``-i`` parameter is given, the interface will send back all the traffic it receives.
+    If two ``-i`` parameters are given, the two interfaces form a bridge,
+    where traffic received on one interface is replicated and sent to the other interface.
 
-To run the application in a linuxapp environment using port 0 and 2, issue the following command:
+For example, to run the application in a linuxapp environment using port 0 and 2:
 
 .. code-block:: console
 
-    ./build/packet_ordering [EAL options] -- -p 0 -p 2
+    ./build/bridge [EAL options] -- -i 0 -i 2
 
-Refer to the *DPDK Getting Started Guide* for general information on running applications and
+Refer to the *DPDK Getting Started Guide for Linux* for general information on running applications and
 the Environment Abstraction Layer (EAL) options.
 
-Note that unlike a traditional bridge or the l2fwd sample application, no MAC address changes are done on the frames.
-Do not forget to take that into account when configuring your traffic generators if you decide to test this sample application.
+Note that unlike a traditional bridge or the ``l2fwd`` sample application, no MAC address changes are done on the frames.
+Do not forget to take this into account when configuring a traffic generators and testing this sample application.
-- 
1.8.1.4