From: Wenzhuo Lu <wenzhuo.lu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 06/17] ixgbe/base: remove driver config of KX4 PHY
Date: Fri, 20 Nov 2015 15:17:47 +0800 [thread overview]
Message-ID: <1448003879-29960-7-git-send-email-wenzhuo.lu@intel.com> (raw)
In-Reply-To: <1448003879-29960-1-git-send-email-wenzhuo.lu@intel.com>
The KX4 PHY will be configured by the NVM image. The driver
had been overwriting this config.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
---
drivers/net/ixgbe/base/ixgbe_phy.c | 2 +-
drivers/net/ixgbe/base/ixgbe_type.h | 11 -----------
drivers/net/ixgbe/base/ixgbe_x550.c | 39 +------------------------------------
drivers/net/ixgbe/base/ixgbe_x550.h | 1 -
4 files changed, 2 insertions(+), 51 deletions(-)
diff --git a/drivers/net/ixgbe/base/ixgbe_phy.c b/drivers/net/ixgbe/base/ixgbe_phy.c
index 1a83758..32fe159 100644
--- a/drivers/net/ixgbe/base/ixgbe_phy.c
+++ b/drivers/net/ixgbe/base/ixgbe_phy.c
@@ -951,7 +951,7 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
/* Setup link based on the new speed settings */
- hw->phy.ops.setup_link(hw);
+ ixgbe_setup_phy_link(hw);
return IXGBE_SUCCESS;
}
diff --git a/drivers/net/ixgbe/base/ixgbe_type.h b/drivers/net/ixgbe/base/ixgbe_type.h
index 98ad83d..a2eb591 100644
--- a/drivers/net/ixgbe/base/ixgbe_type.h
+++ b/drivers/net/ixgbe/base/ixgbe_type.h
@@ -4001,15 +4001,6 @@ struct ixgbe_hw {
#define IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN (1 << 3)
#define IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN (1 << 31)
-#define IXGBE_KX4_LINK_CNTL_1 0x4C
-#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX (1 << 16)
-#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4 (1 << 17)
-#define IXGBE_KX4_LINK_CNTL_1_TETH_EEE_CAP_KX (1 << 24)
-#define IXGBE_KX4_LINK_CNTL_1_TETH_EEE_CAP_KX4 (1 << 25)
-#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_ENABLE (1 << 29)
-#define IXGBE_KX4_LINK_CNTL_1_TETH_FORCE_LINK_UP (1 << 30)
-#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART (1 << 31)
-
#define IXGBE_SB_IOSF_INDIRECT_CTRL 0x00011144
#define IXGBE_SB_IOSF_INDIRECT_DATA 0x00011148
@@ -4026,8 +4017,6 @@ struct ixgbe_hw {
#define IXGBE_SB_IOSF_CTRL_BUSY_SHIFT 31
#define IXGBE_SB_IOSF_CTRL_BUSY (1 << IXGBE_SB_IOSF_CTRL_BUSY_SHIFT)
#define IXGBE_SB_IOSF_TARGET_KR_PHY 0
-#define IXGBE_SB_IOSF_TARGET_KX4_PHY 1
-#define IXGBE_SB_IOSF_TARGET_KX4_PCS 2
#define IXGBE_NW_MNG_IF_SEL 0x00011178
#define IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE (1 << 24)
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
index 5833d7e..f6139df 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -1530,7 +1530,7 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
/* Set functions pointers based on phy type */
switch (hw->phy.type) {
case ixgbe_phy_x550em_kx4:
- phy->ops.setup_link = ixgbe_setup_kx4_x550em;
+ phy->ops.setup_link = NULL;
phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
break;
@@ -1745,43 +1745,6 @@ s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
}
/**
- * ixgbe_setup_kx4_x550em - Configure the KX4 PHY.
- * @hw: pointer to hardware structure
- *
- * Configures the integrated KX4 PHY.
- **/
-s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw)
-{
- s32 status;
- u32 reg_val;
-
- status = ixgbe_read_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
- IXGBE_SB_IOSF_TARGET_KX4_PCS, ®_val);
- if (status)
- return status;
-
- reg_val &= ~(IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4 |
- IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX);
-
- reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_ENABLE;
-
- /* Advertise 10G support. */
- if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
- reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4;
-
- /* Advertise 1G support. */
- if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
- reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX;
-
- /* Restart auto-negotiation. */
- reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART;
- status = ixgbe_write_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
- IXGBE_SB_IOSF_TARGET_KX4_PCS, reg_val);
-
- return status;
-}
-
-/**
* ixgbe_setup_mac_link_sfp_x550em - Setup internal/external the PHY for SFP
* @hw: pointer to hardware structure
*
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.h b/drivers/net/ixgbe/base/ixgbe_x550.h
index 4f986e8..193acb6 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.h
+++ b/drivers/net/ixgbe/base/ixgbe_x550.h
@@ -81,7 +81,6 @@ void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw);
s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw);
s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw);
s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw);
-s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw);
s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw);
s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw);
s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw);
--
1.9.3
next prev parent reply other threads:[~2015-11-20 7:18 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-20 7:17 [dpdk-dev] [PATCH 00/17] Update ixgbe base code Wenzhuo Lu
2015-11-20 7:17 ` [dpdk-dev] [PATCH 01/17] ixgbe/base: update README Wenzhuo Lu
2015-11-20 7:17 ` [dpdk-dev] [PATCH 02/17] ixgbe/base: avoid needless PHY access on copper phys Wenzhuo Lu
2015-11-20 7:17 ` [dpdk-dev] [PATCH 03/17] ixgbe/base: do not wait for signature rule addition Wenzhuo Lu
2015-11-20 7:17 ` [dpdk-dev] [PATCH 04/17] ixgbe/base: use mvals values instead of defines Wenzhuo Lu
2015-11-20 7:17 ` [dpdk-dev] [PATCH 05/17] ixgbe/base: add Single-port Sage Pond device ID Wenzhuo Lu
2015-11-20 7:17 ` Wenzhuo Lu [this message]
2015-11-20 7:17 ` [dpdk-dev] [PATCH 07/17] ixgbe/base: add Flow Control Ethertype to ETQF filter list Wenzhuo Lu
2015-11-20 7:17 ` [dpdk-dev] [PATCH 08/17] ixgbe/base: add KR mode support Wenzhuo Lu
2015-11-20 7:17 ` [dpdk-dev] [PATCH 09/17] ixgbe/base: add flow director drop queue Wenzhuo Lu
2015-11-20 7:17 ` [dpdk-dev] [PATCH 10/17] ixgbe/base: check mac type for iosf and phy Wenzhuo Lu
2015-11-20 7:17 ` [dpdk-dev] [PATCH 11/17] ixgbe/base: configure x550 MDIO clock speed Wenzhuo Lu
2015-11-20 7:17 ` [dpdk-dev] [PATCH 12/17] ixgbe/base: fill at least min credits to a TC credit refills Wenzhuo Lu
2015-11-20 7:17 ` [dpdk-dev] [PATCH 13/17] ixgbe/base: support new thermal alarm Wenzhuo Lu
2015-11-20 7:17 ` [dpdk-dev] [PATCH 14/17] ixgbe/base: add new iXFI configuration helper function Wenzhuo Lu
2015-11-20 7:17 ` [dpdk-dev] [PATCH 15/17] ixgbe/base: prevent KR PHY reset in init Wenzhuo Lu
2015-11-20 7:17 ` [dpdk-dev] [PATCH 16/17] ixgbe/base: new defines for FW Wenzhuo Lu
2015-11-20 7:17 ` [dpdk-dev] [PATCH 17/17] ixgbe: add new device X550T1 Wenzhuo Lu
2015-11-20 16:41 ` Stephen Hemminger
2016-01-14 8:48 ` [dpdk-dev] [PATCH 00/17] Update ixgbe base code Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1448003879-29960-7-git-send-email-wenzhuo.lu@intel.com \
--to=wenzhuo.lu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).