From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga14.intel.com (mga14.intel.com [192.55.52.115]) by dpdk.org (Postfix) with ESMTP id F20CE8E95 for ; Mon, 23 Nov 2015 16:20:54 +0100 (CET) Received: from orsmga003.jf.intel.com ([10.7.209.27]) by fmsmga103.fm.intel.com with ESMTP; 23 Nov 2015 07:20:54 -0800 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.20,337,1444719600"; d="scan'208";a="692610092" Received: from irvmail001.ir.intel.com ([163.33.26.43]) by orsmga003.jf.intel.com with ESMTP; 23 Nov 2015 07:20:52 -0800 Received: from sivswdev01.ir.intel.com (sivswdev01.ir.intel.com [10.237.217.45]) by irvmail001.ir.intel.com (8.14.3/8.13.6/MailSET/Hub) with ESMTP id tANFKqDn014176; Mon, 23 Nov 2015 15:20:52 GMT Received: from sivswdev01.ir.intel.com (localhost [127.0.0.1]) by sivswdev01.ir.intel.com with ESMTP id tANFKpGI022722; Mon, 23 Nov 2015 15:20:51 GMT Received: (from bairemon@localhost) by sivswdev01.ir.intel.com with id tANFKpvY022718; Mon, 23 Nov 2015 15:20:51 GMT From: Bernard Iremonger To: dev@dpdk.org Date: Mon, 23 Nov 2015 15:20:46 +0000 Message-Id: <1448292046-22682-1-git-send-email-bernard.iremonger@intel.com> X-Mailer: git-send-email 1.7.4.1 In-Reply-To: References: Subject: [dpdk-dev] [PATCH 1/1] app/test: create ring and ethdevs in pmd_ring_autotest X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: patches and discussions about DPDK List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 23 Nov 2015 15:20:55 -0000 Use command line option --vdev=eth_ring0 to create port 0. Create two rings and five ethdevs in test_pmd_ring for ports 1 to 5. Improve test output by adding the port number to printf statements, and adding a printf describing each test. revise ring-based PMD doc to match latest ring PMD code. Signed-off-by: Bernard Iremonger --- app/test/test_pmd_ring.c | 360 +++++++++++++++++++++++++----------------- doc/guides/nics/pcap_ring.rst | 28 ++-- 2 files changed, 235 insertions(+), 153 deletions(-) diff --git a/app/test/test_pmd_ring.c b/app/test/test_pmd_ring.c index a555db8..5568759 100644 --- a/app/test/test_pmd_ring.c +++ b/app/test/test_pmd_ring.c @@ -1,7 +1,7 @@ /*- * BSD LICENSE * - * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + * Copyright(c) 2010-2015 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -38,108 +38,104 @@ #include static struct rte_mempool *mp; +static int tx_porta, rx_portb, rxtx_portc, rxtx_portd, rxtx_porte; -#define TX_PORT 0 -#define RX_PORT 1 -#define RXTX_PORT 2 -#define RXTX_PORT2 3 -#define RXTX_PORT3 4 #define SOCKET0 0 - #define RING_SIZE 256 +#define NUM_RINGS 2 +#define NB_MBUF 512 -#define NB_MBUF 512 static int -test_ethdev_configure(void) +test_ethdev_configure_port(int port) { struct rte_eth_conf null_conf; struct rte_eth_link link; memset(&null_conf, 0, sizeof(struct rte_eth_conf)); - if ((TX_PORT >= RTE_MAX_ETHPORTS) || (RX_PORT >= RTE_MAX_ETHPORTS)\ - || (RXTX_PORT >= RTE_MAX_ETHPORTS)) { - printf(" TX/RX port exceed max eth ports\n"); - return -1; - } - if (rte_eth_dev_configure(TX_PORT, 1, 2, &null_conf) < 0) { - printf("Configure failed for TX port\n"); + if (rte_eth_dev_configure(port, 1, 2, &null_conf) < 0) { + printf("Configure failed for port %d\n", port); return -1; } /* Test queue release */ - if (rte_eth_dev_configure(TX_PORT, 1, 1, &null_conf) < 0) { - printf("Configure failed for TX port\n"); - return -1; - } - if (rte_eth_dev_configure(RX_PORT, 1, 1, &null_conf) < 0) { - printf("Configure failed for RX port\n"); - return -1; - } - if (rte_eth_dev_configure(RXTX_PORT, 1, 1, &null_conf) < 0) { - printf("Configure failed for RXTX port\n"); + if (rte_eth_dev_configure(port, 1, 1, &null_conf) < 0) { + printf("Configure failed for port %d\n", port); return -1; } - if (rte_eth_tx_queue_setup(TX_PORT, 0, RING_SIZE, SOCKET0, NULL) < 0) { - printf("TX queue setup failed\n"); - return -1; - } - if (rte_eth_rx_queue_setup(RX_PORT, 0, RING_SIZE, SOCKET0, - NULL, mp) < 0) { - printf("RX queue setup failed\n"); - return -1; - } - if (rte_eth_tx_queue_setup(RXTX_PORT, 0, RING_SIZE, SOCKET0, NULL) < 0) { - printf("TX queue setup failed\n"); + if (rte_eth_tx_queue_setup(port, 0, RING_SIZE, SOCKET0, NULL) < 0) { + printf("TX queue setup failed port %d\n", port); return -1; } - if (rte_eth_rx_queue_setup(RXTX_PORT, 0, RING_SIZE, SOCKET0, + + if (rte_eth_rx_queue_setup(port, 0, RING_SIZE, SOCKET0, NULL, mp) < 0) { - printf("RX queue setup failed\n"); + printf("RX queue setup failed port %d\n", port); return -1; } - if (rte_eth_dev_start(TX_PORT) < 0) { - printf("Error starting TX port\n"); + if (rte_eth_dev_start(port) < 0) { + printf("Error starting port %d\n", port); return -1; } - if (rte_eth_dev_start(RX_PORT) < 0) { - printf("Error starting RX port\n"); + + rte_eth_link_get(port, &link); + + return 0; +} + +static int +test_send_basic_packets(void) +{ + struct rte_mbuf bufs[RING_SIZE]; + struct rte_mbuf *pbufs[RING_SIZE]; + int i; + + printf("Testing send and receive RING_SIZE/2 packets (tx_porta -> rx_portb)\n"); + + for (i = 0; i < RING_SIZE/2; i++) + pbufs[i] = &bufs[i]; + + if (rte_eth_tx_burst(tx_porta, 0, pbufs, RING_SIZE/2) < RING_SIZE/2) { + printf("Failed to transmit packet burst port %d\n", tx_porta); return -1; } - if (rte_eth_dev_start(RXTX_PORT) < 0) { - printf("Error starting RX port\n"); + + if (rte_eth_rx_burst(rx_portb, 0, pbufs, RING_SIZE) != RING_SIZE/2) { + printf("Failed to receive packet burst on port %d\n", rx_portb); return -1; } - rte_eth_link_get(TX_PORT, &link); - rte_eth_link_get(RX_PORT, &link); - rte_eth_link_get(RXTX_PORT, &link); + for (i = 0; i < RING_SIZE/2; i++) + if (pbufs[i] != &bufs[i]) { + printf("Error: received data does not match that transmitted\n"); + return -1; + } return 0; } static int -test_send_basic_packets(void) +test_send_basic_packets_port(int port) { struct rte_mbuf bufs[RING_SIZE]; struct rte_mbuf *pbufs[RING_SIZE]; int i; - printf("Testing ring pmd RX/TX\n"); + printf("Testing send and receive RING_SIZE/2 packets (cmdl_port0 -> cmdl_port0)\n"); for (i = 0; i < RING_SIZE/2; i++) pbufs[i] = &bufs[i]; - if (rte_eth_tx_burst(TX_PORT, 0, pbufs, RING_SIZE/2) < RING_SIZE/2) { - printf("Failed to transmit packet burst\n"); + if (rte_eth_tx_burst(port, 0, pbufs, RING_SIZE/2) < RING_SIZE/2) { + printf("Failed to transmit packet burst port %d\n", port); return -1; } - if (rte_eth_rx_burst(RX_PORT, 0, pbufs, RING_SIZE) != RING_SIZE/2) { - printf("Failed to receive packet burst\n"); + if (rte_eth_rx_burst(port, 0, pbufs, RING_SIZE) != RING_SIZE/2) { + printf("Failed to receive packet burst on port %d\n", port); return -1; } @@ -152,89 +148,92 @@ test_send_basic_packets(void) return 0; } + static int -test_get_stats(void) +test_get_stats(int port) { struct rte_eth_stats stats; struct rte_mbuf buf, *pbuf = &buf; - printf("Testing ring PMD stats\n"); + printf("Testing ring PMD stats_get port %d\n", port); /* check stats of RXTX port, should all be zero */ - rte_eth_stats_get(RXTX_PORT, &stats); + + rte_eth_stats_get(port, &stats); if (stats.ipackets != 0 || stats.opackets != 0 || stats.ibytes != 0 || stats.obytes != 0 || stats.ierrors != 0 || stats.oerrors != 0) { - printf("Error: RXTX port stats are not zero\n"); + printf("Error: port %d stats are not zero\n", port); return -1; } /* send and receive 1 packet and check for stats update */ - if (rte_eth_tx_burst(RXTX_PORT, 0, &pbuf, 1) != 1) { - printf("Error sending packet to RXTX port\n"); + if (rte_eth_tx_burst(port, 0, &pbuf, 1) != 1) { + printf("Error sending packet to port %d\n", port); return -1; } - if (rte_eth_rx_burst(RXTX_PORT, 0, &pbuf, 1) != 1) { - printf("Error receiving packet from RXTX port\n"); + + if (rte_eth_rx_burst(port, 0, &pbuf, 1) != 1) { + printf("Error receiving packet from port %d\n", port); return -1; } - rte_eth_stats_get(RXTX_PORT, &stats); + rte_eth_stats_get(port, &stats); if (stats.ipackets != 1 || stats.opackets != 1 || stats.ibytes != 0 || stats.obytes != 0 || stats.ierrors != 0 || stats.oerrors != 0) { - printf("Error: RXTX port stats are not as expected\n"); + printf("Error: port %d stats are not as expected\n", port); return -1; } return 0; } static int -test_stats_reset(void) +test_stats_reset(int port) { struct rte_eth_stats stats; struct rte_mbuf buf, *pbuf = &buf; - printf("Testing ring PMD stats reset\n"); + printf("Testing ring PMD stats_reset port %d\n", port); - rte_eth_stats_reset(RXTX_PORT); + rte_eth_stats_reset(port); /* check stats of RXTX port, should all be zero */ - rte_eth_stats_get(RXTX_PORT, &stats); + rte_eth_stats_get(port, &stats); if (stats.ipackets != 0 || stats.opackets != 0 || stats.ibytes != 0 || stats.obytes != 0 || stats.ierrors != 0 || stats.oerrors != 0) { - printf("Error: RXTX port stats are not zero\n"); + printf("Error: port %d stats are not zero\n", port); return -1; } /* send and receive 1 packet and check for stats update */ - if (rte_eth_tx_burst(RXTX_PORT, 0, &pbuf, 1) != 1) { - printf("Error sending packet to RXTX port\n"); + if (rte_eth_tx_burst(port, 0, &pbuf, 1) != 1) { + printf("Error sending packet to port %d\n", port); return -1; } - if (rte_eth_rx_burst(RXTX_PORT, 0, &pbuf, 1) != 1) { - printf("Error receiving packet from RXTX port\n"); + if (rte_eth_rx_burst(port, 0, &pbuf, 1) != 1) { + printf("Error receiving packet from port %d\n", port); return -1; } - rte_eth_stats_get(RXTX_PORT, &stats); + rte_eth_stats_get(port, &stats); if (stats.ipackets != 1 || stats.opackets != 1 || stats.ibytes != 0 || stats.obytes != 0 || stats.ierrors != 0 || stats.oerrors != 0) { - printf("Error: RXTX port stats are not as expected\n"); + printf("Error: port %d stats are not as expected\n", port); return -1; } - rte_eth_stats_reset(RXTX_PORT); + rte_eth_stats_reset(port); /* check stats of RXTX port, should all be zero */ - rte_eth_stats_get(RXTX_PORT, &stats); + rte_eth_stats_get(port, &stats); if (stats.ipackets != 0 || stats.opackets != 0 || stats.ibytes != 0 || stats.obytes != 0 || stats.ierrors != 0 || stats.oerrors != 0) { - printf("Error: RXTX port stats are not zero\n"); + printf("Error: port %d stats are not zero\n", port); return -1; } @@ -242,162 +241,182 @@ test_stats_reset(void) } static int -test_pmd_ring_pair_create_attach(void) +test_pmd_ring_pair_create_attach(int portd, int porte) { struct rte_eth_stats stats, stats2; struct rte_mbuf buf, *pbuf = &buf; struct rte_eth_conf null_conf; - if ((RXTX_PORT2 >= RTE_MAX_ETHPORTS) || (RXTX_PORT3 >= RTE_MAX_ETHPORTS)) { - printf(" TX/RX port exceed max eth ports\n"); - return -1; - } - if ((rte_eth_dev_configure(RXTX_PORT2, 1, 1, &null_conf) < 0) - || (rte_eth_dev_configure(RXTX_PORT3, 1, 1, &null_conf) < 0)) { - printf("Configure failed for RXTX port\n"); + if ((rte_eth_dev_configure(portd, 1, 1, &null_conf) < 0) + || (rte_eth_dev_configure(porte, 1, 1, &null_conf) < 0)) { + printf("Configure failed for port\n"); return -1; } - if ((rte_eth_tx_queue_setup(RXTX_PORT2, 0, RING_SIZE, SOCKET0, NULL) < 0) - || (rte_eth_tx_queue_setup(RXTX_PORT3, 0, RING_SIZE, SOCKET0, NULL) < 0)) { + if ((rte_eth_tx_queue_setup(portd, 0, RING_SIZE, SOCKET0, NULL) < 0) + || (rte_eth_tx_queue_setup(porte, 0, RING_SIZE, SOCKET0, NULL) < 0)) { printf("TX queue setup failed\n"); return -1; } - if ((rte_eth_rx_queue_setup(RXTX_PORT2, 0, RING_SIZE, SOCKET0, NULL, mp) < 0) - || (rte_eth_rx_queue_setup(RXTX_PORT3, 0, RING_SIZE, SOCKET0, NULL, mp) < 0)) { + if ((rte_eth_rx_queue_setup(portd, 0, RING_SIZE, SOCKET0, NULL, mp) < 0) + || (rte_eth_rx_queue_setup(porte, 0, RING_SIZE, SOCKET0, NULL, mp) < 0)) { printf("RX queue setup failed\n"); return -1; } - if ((rte_eth_dev_start(RXTX_PORT2) < 0) - || (rte_eth_dev_start(RXTX_PORT3) < 0)) { - printf("Error starting RXTX port\n"); + if ((rte_eth_dev_start(portd) < 0) + || (rte_eth_dev_start(porte) < 0)) { + printf("Error starting port\n"); + return -1; + } + + rte_eth_stats_reset(portd); + /* check stats of port, should all be zero */ + rte_eth_stats_get(portd, &stats); + if (stats.ipackets != 0 || stats.opackets != 0 || + stats.ibytes != 0 || stats.obytes != 0 || + stats.ierrors != 0 || stats.oerrors != 0) { + printf("Error: port %d stats are not zero\n", portd); + return -1; + } + + rte_eth_stats_reset(porte); + /* check stats of port, should all be zero */ + rte_eth_stats_get(porte, &stats2); + if (stats2.ipackets != 0 || stats2.opackets != 0 || + stats2.ibytes != 0 || stats2.obytes != 0 || + stats2.ierrors != 0 || stats2.oerrors != 0) { + printf("Error: port %d stats are not zero\n", porte); return -1; } /* - * send and receive 1 packet (RXTX_PORT2 -> RXTX_PORT3) + * send and receive 1 packet (portd -> porte) * and check for stats update */ - if (rte_eth_tx_burst(RXTX_PORT2, 0, &pbuf, 1) != 1) { - printf("Error sending packet to RXTX port\n"); + printf("Testing send and receive 1 packet (portd -> porte)\n"); + if (rte_eth_tx_burst(portd, 0, &pbuf, 1) != 1) { + printf("Error sending packet to port %d\n", portd); return -1; } - if (rte_eth_rx_burst(RXTX_PORT3, 0, &pbuf, 1) != 1) { - printf("Error receiving packet from RXTX port\n"); + if (rte_eth_rx_burst(porte, 0, &pbuf, 1) != 1) { + printf("Error receiving packet from port %d\n", porte); return -1; } - rte_eth_stats_get(RXTX_PORT2, &stats); - rte_eth_stats_get(RXTX_PORT3, &stats2); + rte_eth_stats_get(portd, &stats); + rte_eth_stats_get(porte, &stats2); if (stats.ipackets != 0 || stats.opackets != 1 || stats.ibytes != 0 || stats.obytes != 0 || stats.ierrors != 0 || stats.oerrors != 0) { - printf("Error: RXTX port stats are not as expected\n"); + printf("Error: port %d stats are not as expected\n", portd); return -1; } if (stats2.ipackets != 1 || stats2.opackets != 0 || stats2.ibytes != 0 || stats2.obytes != 0 || stats2.ierrors != 0 || stats2.oerrors != 0) { - printf("Error: RXTX port stats are not as expected\n"); + printf("Error: port %d stats are not as expected\n", porte); return -1; } /* - * send and receive 1 packet (RXTX_PORT3 -> RXTX_PORT2) + * send and receive 1 packet (porte -> portd) * and check for stats update */ - if (rte_eth_tx_burst(RXTX_PORT3, 0, &pbuf, 1) != 1) { - printf("Error sending packet to RXTX port\n"); + printf("Testing send and receive 1 packet (porte -> portd)\n"); + if (rte_eth_tx_burst(porte, 0, &pbuf, 1) != 1) { + printf("Error sending packet to port %d\n", porte); return -1; } - if (rte_eth_rx_burst(RXTX_PORT2, 0, &pbuf, 1) != 1) { - printf("Error receiving packet from RXTX port\n"); + if (rte_eth_rx_burst(portd, 0, &pbuf, 1) != 1) { + printf("Error receiving packet from port %d\n", portd); return -1; } - rte_eth_stats_get(RXTX_PORT2, &stats); - rte_eth_stats_get(RXTX_PORT3, &stats2); + rte_eth_stats_get(portd, &stats); + rte_eth_stats_get(porte, &stats2); if (stats.ipackets != 1 || stats.opackets != 1 || stats.ibytes != 0 || stats.obytes != 0 || stats.ierrors != 0 || stats.oerrors != 0) { - printf("Error: RXTX port stats are not as expected\n"); + printf("Error: port %d stats are not as expected\n", portd); return -1; } if (stats2.ipackets != 1 || stats2.opackets != 1 || stats2.ibytes != 0 || stats2.obytes != 0 || stats2.ierrors != 0 || stats2.oerrors != 0) { - printf("Error: RXTX port stats are not as expected\n"); + printf("Error: port %d stats are not as expected\n", porte); return -1; } /* - * send and receive 1 packet (RXTX_PORT2 -> RXTX_PORT2) + * send and receive 1 packet (portd -> portd) * and check for stats update */ - if (rte_eth_tx_burst(RXTX_PORT2, 0, &pbuf, 1) != 1) { - printf("Error sending packet to RXTX port\n"); + printf("Testing send and receive 1 packet (portd -> portd)\n"); + if (rte_eth_tx_burst(portd, 0, &pbuf, 1) != 1) { + printf("Error sending packet to port %d\n", portd); return -1; } - if (rte_eth_rx_burst(RXTX_PORT2, 0, &pbuf, 1) != 1) { - printf("Error receiving packet from RXTX port\n"); + if (rte_eth_rx_burst(portd, 0, &pbuf, 1) != 1) { + printf("Error receiving packet from port %d\n", porte); return -1; } - rte_eth_stats_get(RXTX_PORT2, &stats); - rte_eth_stats_get(RXTX_PORT3, &stats2); + rte_eth_stats_get(portd, &stats); + rte_eth_stats_get(porte, &stats2); if (stats.ipackets != 2 || stats.opackets != 2 || stats.ibytes != 0 || stats.obytes != 0 || stats.ierrors != 0 || stats.oerrors != 0) { - printf("Error: RXTX port stats are not as expected\n"); + printf("Error: port %d stats are not as expected\n", portd); return -1; } if (stats2.ipackets != 1 || stats2.opackets != 1 || stats2.ibytes != 0 || stats2.obytes != 0 || stats2.ierrors != 0 || stats2.oerrors != 0) { - printf("Error: RXTX port stats are not as expected\n"); + printf("Error: port %d stats are not as expected\n", porte); return -1; } /* - * send and receive 1 packet (RXTX_PORT3 -> RXTX_PORT3) + * send and receive 1 packet (porte -> porte) * and check for stats update */ - if (rte_eth_tx_burst(RXTX_PORT3, 0, &pbuf, 1) != 1) { - printf("Error sending packet to RXTX port\n"); + printf("Testing send and receive 1 packet (porte -> porte)\n"); + if (rte_eth_tx_burst(porte, 0, &pbuf, 1) != 1) { + printf("Error sending packet to port %d\n", porte); return -1; } - if (rte_eth_rx_burst(RXTX_PORT3, 0, &pbuf, 1) != 1) { - printf("Error receiving packet from RXTX port\n"); + if (rte_eth_rx_burst(porte, 0, &pbuf, 1) != 1) { + printf("Error receiving packet from port %d\n", porte); return -1; } - rte_eth_stats_get(RXTX_PORT2, &stats); - rte_eth_stats_get(RXTX_PORT3, &stats2); + rte_eth_stats_get(portd, &stats); + rte_eth_stats_get(porte, &stats2); if (stats.ipackets != 2 || stats.opackets != 2 || stats.ibytes != 0 || stats.obytes != 0 || stats.ierrors != 0 || stats.oerrors != 0) { - printf("Error: RXTX port stats are not as expected\n"); + printf("Error: port %d stats are not as expected\n", portd); return -1; } if (stats2.ipackets != 2 || stats2.opackets != 2 || stats2.ibytes != 0 || stats2.obytes != 0 || stats2.ierrors != 0 || stats2.oerrors != 0) { - printf("Error: RXTX port stats are not as expected\n"); + printf("Error: port %d stats are not as expected\n", porte); return -1; } - rte_eth_dev_stop(RXTX_PORT2); - rte_eth_dev_stop(RXTX_PORT3); + rte_eth_dev_stop(portd); + rte_eth_dev_stop(porte); return 0; } @@ -405,36 +424,95 @@ test_pmd_ring_pair_create_attach(void) static int test_pmd_ring(void) { + struct rte_ring *rxtx[NUM_RINGS]; + int cmdl_port0 = 0; + uint8_t nb_ports; + + nb_ports = rte_eth_dev_count(); + printf("nb_ports=%d\n", (int)nb_ports); + + /* create the rings and eth_rings in the test code. + * This does not test the rte_pmd_ring_devinit function. + * + * Test with the command line option --vdev=eth_ring0 to test rte_pmd_ring_devinit. + */ + rxtx[0] = rte_ring_create("R0", RING_SIZE, SOCKET0, RING_F_SP_ENQ|RING_F_SC_DEQ); + if (rxtx[0] == NULL) { + printf("rte_ring_create R0 failed"); + return -1; + } + + rxtx[1] = rte_ring_create("R1", RING_SIZE, SOCKET0, RING_F_SP_ENQ|RING_F_SC_DEQ); + if (rxtx[1] == NULL) { + printf("rte_ring_create R1 failed"); + return -1; + } + + tx_porta = rte_eth_from_rings("eth_ringa", rxtx, NUM_RINGS, rxtx, NUM_RINGS, SOCKET0); + rx_portb = rte_eth_from_rings("eth_ringb", rxtx, NUM_RINGS, rxtx, NUM_RINGS, SOCKET0); + rxtx_portc = rte_eth_from_rings("eth_ringc", rxtx, NUM_RINGS, rxtx, NUM_RINGS, SOCKET0); + rxtx_portd = rte_eth_from_rings("eth_ringd", rxtx, NUM_RINGS, rxtx, NUM_RINGS, SOCKET0); + rxtx_porte = rte_eth_from_rings("eth_ringe", rxtx, NUM_RINGS, rxtx, NUM_RINGS, SOCKET0); + + printf("tx_porta=%d rx_portb=%d rxtx_portc=%d rxtx_portd=%d rxtx_porte=%d\n", + tx_porta, rx_portb, rxtx_portc, rxtx_portd, rxtx_porte); + + if ((tx_porta == -1) || (rx_portb == -1) || (rxtx_portc == -1) + || (rxtx_portd == -1) || (rxtx_porte == -1)) { + printf("rte_eth_from rings failed\n"); + return -1; + } + mp = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32, 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id()); if (mp == NULL) return -1; - if ((TX_PORT >= RTE_MAX_ETHPORTS) || (RX_PORT >= RTE_MAX_ETHPORTS)\ - || (RXTX_PORT >= RTE_MAX_ETHPORTS)) { - printf(" TX/RX port exceed max eth ports\n"); + if ((tx_porta >= RTE_MAX_ETHPORTS) || (rx_portb >= RTE_MAX_ETHPORTS) + || (rxtx_portc >= RTE_MAX_ETHPORTS) + || (rxtx_portd >= RTE_MAX_ETHPORTS) + || (rxtx_porte >= RTE_MAX_ETHPORTS)) { + printf(" port exceed max eth ports\n"); return -1; } - if (test_ethdev_configure() < 0) + if (test_ethdev_configure_port(tx_porta) < 0) + return -1; + + if (test_ethdev_configure_port(rx_portb) < 0) + return -1; + + if (test_ethdev_configure_port(rxtx_portc) < 0) return -1; if (test_send_basic_packets() < 0) return -1; - if (test_get_stats() < 0) + if (test_get_stats(rxtx_portc) < 0) return -1; - if (test_stats_reset() < 0) + if (test_stats_reset(rxtx_portc) < 0) return -1; - rte_eth_dev_stop(RX_PORT); - rte_eth_dev_stop(TX_PORT); - rte_eth_dev_stop(RXTX_PORT); + rte_eth_dev_stop(tx_porta); + rte_eth_dev_stop(rx_portb); + rte_eth_dev_stop(rxtx_portc); - if (test_pmd_ring_pair_create_attach() < 0) + if (test_pmd_ring_pair_create_attach(rxtx_portd, rxtx_porte) < 0) return -1; + if (nb_ports > 0) { + /* test port 0 created with the --vdev=eth_ring0 command line option */ + if (test_ethdev_configure_port(cmdl_port0) < 0) + return -1; + if (test_send_basic_packets_port(cmdl_port0) < 0) + return -1; + if (test_stats_reset(cmdl_port0) < 0) + return -1; + if (test_get_stats(cmdl_port0) < 0) + return -1; + rte_eth_dev_stop(cmdl_port0); + } return 0; } diff --git a/doc/guides/nics/pcap_ring.rst b/doc/guides/nics/pcap_ring.rst index 5d65dc6..46aa3ac 100644 --- a/doc/guides/nics/pcap_ring.rst +++ b/doc/guides/nics/pcap_ring.rst @@ -1,5 +1,5 @@ .. BSD LICENSE - Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + Copyright(c) 2010-2015 Intel Corporation. All rights reserved. All rights reserved. Redistribution and use in source and binary forms, with or without @@ -217,7 +217,7 @@ Using the Poll Mode Driver from an Application Both drivers can provide similar APIs to allow the user to create a PMD, that is, rte_ethdev structure, instances at run-time in the end-application, for example, using rte_eth_from_rings() or rte_eth_from_pcaps() APIs. -For the rings- based PMD, this functionality could be used, for example, +For the rings-based PMD, this functionality could be used, for example, to allow data exchange between cores using rings to be done in exactly the same way as sending or receiving packets from an Ethernet device. For the libpcap-based PMD, it allows an application to open one or more pcap files @@ -231,26 +231,30 @@ for reception on the same port (error handling omitted for clarity): .. code-block:: c - struct rte_ring *r1, *r2; - int port1, port2; + #define RING_SIZE 256 + #define NUM_RINGS 2 + #define SOCKET0 0 - r1 = rte_ring_create("R1", 256, SOCKET0,RING_F_SP_ENQ|RING_F_SC_DEQ); - r2 = rte_ring_create("R2", 256, SOCKET0, RING_F_SP_ENQ|RING_F_SC_DEQ); + struct rte_ring *ring[NUM_RINGS]; + int port0, port1; - /* create an ethdev where RX and TX are done to/from r1, and * another from r2 */ + ring[0] = rte_ring_create("R0", RING_SIZE, SOCKET0, RING_F_SP_ENQ|RING_F_SC_DEQ); + ring[1] = rte_ring_create("R1", RING_SIZE, SOCKET0, RING_F_SP_ENQ|RING_F_SC_DEQ); - port1 = rte_eth_from_rings(r1, 1, r1, 1, SOCKET0); - port2 = rte_eth_from_rings(r2, 1, r2, 1, SOCKET0); + /* create two ethdev's */ + + port0 = rte_eth_from_rings("eth_ring0", ring, NUM_RINGS, ring, NUM_RINGS, SOCKET0); + port1 = rte_eth_from_rings("eth_ring1", ring, NUM_RINGS, ring, NUM_RINGS, SOCKET0); To create two pseudo-Ethernet ports where the traffic is switched between them, -that is, traffic sent to port 1 is read back from port 2 and vice-versa, +that is, traffic sent to port 0 is read back from port 1 and vice-versa, the final two lines could be changed as below: .. code-block:: c - port1 = rte_eth_from_rings(r1, 1, r2, 1, SOCKET0); - port2 = rte_eth_from_rings(r2, 1, r1, 1, SOCKET0); + port0 = rte_eth_from_rings("eth_ring0", &ring[0], 1, &ring[1], 1, SOCKET0); + port1 = rte_eth_from_rings("eth_ring1", &ring[1], 1, &ring[0], 1, SOCKET0); This type of configuration could be useful in a pipeline model, for example, where one may want to have inter-core communication using pseudo Ethernet devices rather than raw rings, -- 1.9.1