From: Alejandro Lucero <alejandro.lucero@netronome.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v9 1/9] nfp: basic initialization
Date: Thu, 26 Nov 2015 09:49:21 +0000 [thread overview]
Message-ID: <1448531369-8808-2-git-send-email-alejandro.lucero@netronome.com> (raw)
In-Reply-To: <1448531369-8808-1-git-send-email-alejandro.lucero@netronome.com>
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Signed-off-by: Rolf Neugebauer <rolf.neugebauer@netronome.com>
---
MAINTAINERS | 3 +
config/common_linuxapp | 6 +
doc/guides/rel_notes/release_2_2.rst | 4 +
drivers/net/Makefile | 1 +
drivers/net/nfp/Makefile | 56 +++
drivers/net/nfp/nfp_net.c | 699 +++++++++++++++++++++++++++++++
drivers/net/nfp/nfp_net_ctrl.h | 324 ++++++++++++++
drivers/net/nfp/nfp_net_logs.h | 75 ++++
drivers/net/nfp/nfp_net_pmd.h | 453 ++++++++++++++++++++
drivers/net/nfp/rte_pmd_nfp_version.map | 3 +
mk/rte.app.mk | 1 +
11 files changed, 1625 insertions(+)
create mode 100644 drivers/net/nfp/Makefile
create mode 100644 drivers/net/nfp/nfp_net.c
create mode 100644 drivers/net/nfp/nfp_net_ctrl.h
create mode 100644 drivers/net/nfp/nfp_net_logs.h
create mode 100644 drivers/net/nfp/nfp_net_pmd.h
create mode 100644 drivers/net/nfp/rte_pmd_nfp_version.map
diff --git a/MAINTAINERS b/MAINTAINERS
index 840faeb..df5b962 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -318,6 +318,9 @@ Null PMD
M: Tetsuya Mukawa <mukawa@igel.co.jp>
F: drivers/net/null/
+Netronome nfp
+M: Alejandro Lucero <alejandro.lucero@netronome.com>
+F: drivers/net/nfp/
Packet processing
-----------------
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 4a68da4..1d77db7 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -279,6 +279,12 @@ CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
#
+# Compile burst-oriented Netronome NFP PMD driver
+#
+CONFIG_RTE_LIBRTE_NFP_PMD=n
+CONFIG_RTE_LIBRTE_NFP_DEBUG=n
+
+#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
diff --git a/doc/guides/rel_notes/release_2_2.rst b/doc/guides/rel_notes/release_2_2.rst
index 8c77768..8154db7 100644
--- a/doc/guides/rel_notes/release_2_2.rst
+++ b/doc/guides/rel_notes/release_2_2.rst
@@ -195,6 +195,10 @@ Drivers
Fixed issue when releasing null control queue.
+* **nfp: adding new PMD for Netronome nfp-6xxx card.**
+
+ Support for using Netronome nfp-6xxx with PCI VFs.
+
Libraries
~~~~~~~~~
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index cddcd57..6e4497e 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -43,6 +43,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe
DIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += mlx4
DIRS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5
DIRS-$(CONFIG_RTE_LIBRTE_MPIPE_PMD) += mpipe
+DIRS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += nfp
DIRS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += null
DIRS-$(CONFIG_RTE_LIBRTE_PMD_PCAP) += pcap
DIRS-$(CONFIG_RTE_LIBRTE_PMD_RING) += ring
diff --git a/drivers/net/nfp/Makefile b/drivers/net/nfp/Makefile
new file mode 100644
index 0000000..ef7a13d
--- /dev/null
+++ b/drivers/net/nfp/Makefile
@@ -0,0 +1,56 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+#
+# library name
+#
+LIB = librte_pmd_nfp.a
+
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+
+EXPORT_MAP := rte_pmd_nfp_version.map
+
+LIBABIVER := 1
+
+#
+# all source are stored in SRCS-y
+#
+SRCS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += nfp_net.c
+
+# this lib depends upon:
+DEPDIRS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += lib/librte_eal lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += lib/librte_mempool lib/librte_mbuf
+DEPDIRS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += lib/librte_net lib/librte_malloc
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
new file mode 100644
index 0000000..18067c0
--- /dev/null
+++ b/drivers/net/nfp/nfp_net.c
@@ -0,0 +1,699 @@
+/*
+ * Copyright (c) 2014, 2015 Netronome Systems, Inc.
+ * All rights reserved.
+ *
+ * Small portions derived from code Copyright(c) 2010-2015 Intel Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution
+ *
+ * 3. Neither the name of the copyright holder nor the names of its
+ * contributors may be used to endorse or promote products derived from this
+ * software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * vim:shiftwidth=8:noexpandtab
+ *
+ * @file dpdk/pmd/nfp_net.c
+ *
+ * Netronome vNIC DPDK Poll-Mode Driver: Main entry point
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <unistd.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/socket.h>
+#include <sys/io.h>
+#include <assert.h>
+#include <time.h>
+#include <math.h>
+#include <inttypes.h>
+
+#include <rte_byteorder.h>
+#include <rte_common.h>
+#include <rte_log.h>
+#include <rte_debug.h>
+#include <rte_ethdev.h>
+#include <rte_dev.h>
+#include <rte_ether.h>
+#include <rte_malloc.h>
+#include <rte_memzone.h>
+#include <rte_mempool.h>
+#include <rte_version.h>
+#include <rte_string_fns.h>
+#include <rte_alarm.h>
+
+#include "nfp_net_pmd.h"
+#include "nfp_net_logs.h"
+#include "nfp_net_ctrl.h"
+
+/* Prototypes */
+static void nfp_net_close(struct rte_eth_dev *dev);
+static int nfp_net_configure(struct rte_eth_dev *dev);
+static int nfp_net_init(struct rte_eth_dev *eth_dev);
+static int nfp_net_start(struct rte_eth_dev *dev);
+static void nfp_net_stop(struct rte_eth_dev *dev);
+
+/*
+ * The offset of the queue controller queues in the PCIe Target. These
+ * happen to be at the same offset on the NFP6000 and the NFP3200 so
+ * we use a single macro here.
+ */
+#define NFP_PCIE_QUEUE(_q) (0x80000 + (0x800 * ((_q) & 0xff)))
+
+/* Maximum value which can be added to a queue with one transaction */
+#define NFP_QCP_MAX_ADD 0x7f
+
+#define RTE_MBUF_DMA_ADDR_DEFAULT(mb) \
+ (uint64_t)((mb)->buf_physaddr + RTE_PKTMBUF_HEADROOM)
+
+/* nfp_qcp_ptr - Read or Write Pointer of a queue */
+enum nfp_qcp_ptr {
+ NFP_QCP_READ_PTR = 0,
+ NFP_QCP_WRITE_PTR
+};
+
+/*
+ * nfp_qcp_ptr_add - Add the value to the selected pointer of a queue
+ * @q: Base address for queue structure
+ * @ptr: Add to the Read or Write pointer
+ * @val: Value to add to the queue pointer
+ *
+ * If @val is greater than @NFP_QCP_MAX_ADD multiple writes are performed.
+ */
+static inline void
+nfp_qcp_ptr_add(__u8 *q, enum nfp_qcp_ptr ptr, uint32_t val)
+{
+ uint32_t off;
+
+ if (ptr == NFP_QCP_READ_PTR)
+ off = NFP_QCP_QUEUE_ADD_RPTR;
+ else
+ off = NFP_QCP_QUEUE_ADD_WPTR;
+
+ while (val > NFP_QCP_MAX_ADD) {
+ nn_writel(rte_cpu_to_le_32(NFP_QCP_MAX_ADD), q + off);
+ val -= NFP_QCP_MAX_ADD;
+ }
+
+ nn_writel(rte_cpu_to_le_32(val), q + off);
+}
+
+/*
+ * nfp_qcp_read - Read the current Read/Write pointer value for a queue
+ * @q: Base address for queue structure
+ * @ptr: Read or Write pointer
+ */
+static inline uint32_t
+nfp_qcp_read(__u8 *q, enum nfp_qcp_ptr ptr)
+{
+ uint32_t off;
+ uint32_t val;
+
+ if (ptr == NFP_QCP_READ_PTR)
+ off = NFP_QCP_QUEUE_STS_LO;
+ else
+ off = NFP_QCP_QUEUE_STS_HI;
+
+ val = rte_cpu_to_le_32(nn_readl(q + off));
+
+ if (ptr == NFP_QCP_READ_PTR)
+ return val & NFP_QCP_QUEUE_STS_LO_READPTR_mask;
+ else
+ return val & NFP_QCP_QUEUE_STS_HI_WRITEPTR_mask;
+}
+
+/*
+ * Functions to read/write from/to Config BAR
+ * Performs any endian conversion necessary.
+ */
+static inline __u8
+nn_cfg_readb(struct nfp_net_hw *hw, int off)
+{
+ return nn_readb(hw->ctrl_bar + off);
+}
+
+static inline void
+nn_cfg_writeb(struct nfp_net_hw *hw, int off, __u8 val)
+{
+ nn_writeb(val, hw->ctrl_bar + off);
+}
+
+static inline uint32_t
+nn_cfg_readl(struct nfp_net_hw *hw, int off)
+{
+ return rte_le_to_cpu_32(nn_readl(hw->ctrl_bar + off));
+}
+
+static inline void
+nn_cfg_writel(struct nfp_net_hw *hw, int off, uint32_t val)
+{
+ nn_writel(rte_cpu_to_le_32(val), hw->ctrl_bar + off);
+}
+
+static inline uint64_t
+nn_cfg_readq(struct nfp_net_hw *hw, int off)
+{
+ return rte_le_to_cpu_64(nn_readq(hw->ctrl_bar + off));
+}
+
+static inline void
+nn_cfg_writeq(struct nfp_net_hw *hw, int off, uint64_t val)
+{
+ nn_writeq(rte_cpu_to_le_64(val), hw->ctrl_bar + off);
+}
+
+static int
+__nfp_net_reconfig(struct nfp_net_hw *hw, uint32_t update)
+{
+ int cnt;
+ uint32_t new;
+ struct timespec wait;
+
+ PMD_DRV_LOG(DEBUG, "Writing to the configuration queue (%p)...\n",
+ hw->qcp_cfg);
+
+ if (hw->qcp_cfg == NULL)
+ rte_panic("Bad configuration queue pointer\n");
+
+ nfp_qcp_ptr_add(hw->qcp_cfg, NFP_QCP_WRITE_PTR, 1);
+
+ wait.tv_sec = 0;
+ wait.tv_nsec = 1000000;
+
+ PMD_DRV_LOG(DEBUG, "Polling for update ack...\n");
+
+ /* Poll update field, waiting for NFP to ack the config */
+ for (cnt = 0; ; cnt++) {
+ new = nn_cfg_readl(hw, NFP_NET_CFG_UPDATE);
+ if (new == 0)
+ break;
+ if (new & NFP_NET_CFG_UPDATE_ERR) {
+ PMD_INIT_LOG(ERR, "Reconfig error: 0x%08x\n", new);
+ return -1;
+ }
+ if (cnt >= NFP_NET_POLL_TIMEOUT) {
+ PMD_INIT_LOG(ERR, "Reconfig timeout for 0x%08x after"
+ " %dms\n", update, cnt);
+ rte_panic("Exiting\n");
+ }
+ nanosleep(&wait, 0); /* waiting for a 1ms */
+ }
+ PMD_DRV_LOG(DEBUG, "Ack DONE\n");
+ return 0;
+}
+
+/*
+ * Reconfigure the NIC
+ * @nn: device to reconfigure
+ * @ctrl: The value for the ctrl field in the BAR config
+ * @update: The value for the update field in the BAR config
+ *
+ * Write the update word to the BAR and ping the reconfig queue. Then poll
+ * until the firmware has acknowledged the update by zeroing the update word.
+ */
+static int
+nfp_net_reconfig(struct nfp_net_hw *hw, uint32_t ctrl, uint32_t update)
+{
+ uint32_t err;
+
+ PMD_DRV_LOG(DEBUG, "nfp_net_reconfig: ctrl=%08x update=%08x\n",
+ ctrl, update);
+
+ nn_cfg_writel(hw, NFP_NET_CFG_CTRL, ctrl);
+ nn_cfg_writel(hw, NFP_NET_CFG_UPDATE, update);
+
+ rte_wmb();
+
+ err = __nfp_net_reconfig(hw, update);
+
+ if (!err)
+ return 0;
+
+ /*
+ * Reconfig errors imply situations where they can be handled.
+ * Otherwise, rte_panic is called inside __nfp_net_reconfig
+ */
+ PMD_INIT_LOG(ERR, "Error nfp_net reconfig for ctrl: %x update: %x\n",
+ ctrl, update);
+ return -EIO;
+}
+
+/*
+ * Configure an Ethernet device. This function must be invoked first
+ * before any other function in the Ethernet API. This function can
+ * also be re-invoked when a device is in the stopped state.
+ */
+static int
+nfp_net_configure(struct rte_eth_dev *dev)
+{
+ struct rte_eth_conf *dev_conf;
+ struct rte_eth_rxmode *rxmode;
+ struct rte_eth_txmode *txmode;
+ uint32_t new_ctrl = 0;
+ uint32_t update = 0;
+ struct nfp_net_hw *hw;
+
+ hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+ /*
+ * A DPDK app sends info about how many queues to use and how
+ * those queues need to be configured. This is used by the
+ * DPDK core and it makes sure no more queues than those
+ * advertised by the driver are requested. This function is
+ * called after that internal process
+ */
+
+ PMD_INIT_LOG(DEBUG, "Configure\n");
+
+ dev_conf = &dev->data->dev_conf;
+ rxmode = &dev_conf->rxmode;
+ txmode = &dev_conf->txmode;
+
+ /* Checking TX mode */
+ if (txmode->mq_mode) {
+ PMD_INIT_LOG(INFO, "TX mq_mode DCB and VMDq not supported\n");
+ return -EINVAL;
+ }
+
+ /* Checking RX mode */
+ if (rxmode->mq_mode & ETH_MQ_RX_RSS) {
+ if (hw->cap & NFP_NET_CFG_CTRL_RSS) {
+ update = NFP_NET_CFG_UPDATE_RSS;
+ new_ctrl = NFP_NET_CFG_CTRL_RSS;
+ } else {
+ PMD_INIT_LOG(INFO, "RSS not supported\n");
+ return -EINVAL;
+ }
+ }
+
+ if (rxmode->split_hdr_size) {
+ PMD_INIT_LOG(INFO, "rxmode does not support split header\n");
+ return -EINVAL;
+ }
+
+ if (rxmode->hw_ip_checksum) {
+ if (hw->cap & NFP_NET_CFG_CTRL_RXCSUM) {
+ new_ctrl |= NFP_NET_CFG_CTRL_RXCSUM;
+ } else {
+ PMD_INIT_LOG(INFO, "RXCSUM not supported\n");
+ return -EINVAL;
+ }
+ }
+
+ if (rxmode->hw_vlan_filter) {
+ PMD_INIT_LOG(INFO, "VLAN filter not supported\n");
+ return -EINVAL;
+ }
+
+ if (rxmode->hw_vlan_strip) {
+ if (hw->cap & NFP_NET_CFG_CTRL_RXVLAN) {
+ new_ctrl |= NFP_NET_CFG_CTRL_RXVLAN;
+ } else {
+ PMD_INIT_LOG(INFO, "hw vlan strip not supported\n");
+ return -EINVAL;
+ }
+ }
+
+ if (rxmode->hw_vlan_extend) {
+ PMD_INIT_LOG(INFO, "VLAN extended not supported\n");
+ return -EINVAL;
+ }
+
+ /* Supporting VLAN insertion by default */
+ if (hw->cap & NFP_NET_CFG_CTRL_TXVLAN)
+ new_ctrl |= NFP_NET_CFG_CTRL_TXVLAN;
+
+ if (rxmode->jumbo_frame)
+ /* this is handled in rte_eth_dev_configure */
+
+ if (rxmode->hw_strip_crc) {
+ PMD_INIT_LOG(INFO, "strip CRC not supported\n");
+ return -EINVAL;
+ }
+
+ if (rxmode->enable_scatter) {
+ PMD_INIT_LOG(INFO, "Scatter not supported\n");
+ return -EINVAL;
+ }
+
+ if (!new_ctrl)
+ return 0;
+
+ update |= NFP_NET_CFG_UPDATE_GEN;
+
+ nn_cfg_writel(hw, NFP_NET_CFG_CTRL, new_ctrl);
+ if (nfp_net_reconfig(hw, new_ctrl, update) < 0)
+ return -EIO;
+
+ hw->ctrl = new_ctrl;
+
+ return 0;
+}
+
+static void
+nfp_net_enable_queues(struct rte_eth_dev *dev)
+{
+ struct nfp_net_hw *hw;
+ uint64_t enabled_queues = 0;
+ int i;
+
+ hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+ /* Enabling the required TX queues in the device */
+ for (i = 0; i < dev->data->nb_tx_queues; i++)
+ enabled_queues |= (1 << i);
+
+ nn_cfg_writeq(hw, NFP_NET_CFG_TXRS_ENABLE, enabled_queues);
+
+ enabled_queues = 0;
+
+ /* Enabling the required RX queues in the device */
+ for (i = 0; i < dev->data->nb_rx_queues; i++)
+ enabled_queues |= (1 << i);
+
+ nn_cfg_writeq(hw, NFP_NET_CFG_RXRS_ENABLE, enabled_queues);
+}
+
+static void
+nfp_net_disable_queues(struct rte_eth_dev *dev)
+{
+ struct nfp_net_hw *hw;
+ uint32_t new_ctrl, update = 0;
+
+ hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+ nn_cfg_writeq(hw, NFP_NET_CFG_TXRS_ENABLE, 0);
+ nn_cfg_writeq(hw, NFP_NET_CFG_RXRS_ENABLE, 0);
+
+ new_ctrl = hw->ctrl & ~NFP_NET_CFG_CTRL_ENABLE;
+ update = NFP_NET_CFG_UPDATE_GEN | NFP_NET_CFG_UPDATE_RING |
+ NFP_NET_CFG_UPDATE_MSIX;
+
+ if (hw->cap & NFP_NET_CFG_CTRL_RINGCFG)
+ new_ctrl &= ~NFP_NET_CFG_CTRL_RINGCFG;
+
+ /* If an error when reconfig we avoid to change hw state */
+ if (nfp_net_reconfig(hw, new_ctrl, update) < 0)
+ return;
+
+ hw->ctrl = new_ctrl;
+}
+
+static void
+nfp_net_params_setup(struct nfp_net_hw *hw)
+{
+ uint32_t *mac_address;
+
+ nn_cfg_writel(hw, NFP_NET_CFG_MTU, hw->mtu);
+ nn_cfg_writel(hw, NFP_NET_CFG_FLBUFSZ, hw->flbufsz);
+
+ /* A MAC address is 8 bytes long */
+ mac_address = (uint32_t *)(hw->mac_addr);
+
+ nn_cfg_writel(hw, NFP_NET_CFG_MACADDR,
+ rte_cpu_to_be_32(*mac_address));
+ nn_cfg_writel(hw, NFP_NET_CFG_MACADDR + 4,
+ rte_cpu_to_be_32(*(mac_address + 4)));
+}
+
+static void
+nfp_net_cfg_queue_setup(struct nfp_net_hw *hw)
+{
+ hw->qcp_cfg = hw->tx_bar + NFP_QCP_QUEUE_ADDR_SZ;
+}
+
+static int
+nfp_net_start(struct rte_eth_dev *dev)
+{
+ uint32_t new_ctrl, update = 0;
+ struct nfp_net_hw *hw;
+
+ hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+ PMD_INIT_LOG(DEBUG, "Start\n");
+
+ /* Disabling queues just in case... */
+ nfp_net_disable_queues(dev);
+
+ /* Writing configuration parameters in the device */
+ nfp_net_params_setup(hw);
+
+ /* Enabling the required queues in the device */
+ nfp_net_enable_queues(dev);
+
+ /* Enable device */
+ new_ctrl = hw->ctrl | NFP_NET_CFG_CTRL_ENABLE | NFP_NET_CFG_UPDATE_MSIX;
+ update = NFP_NET_CFG_UPDATE_GEN | NFP_NET_CFG_UPDATE_RING;
+
+ if (hw->cap & NFP_NET_CFG_CTRL_RINGCFG)
+ new_ctrl |= NFP_NET_CFG_CTRL_RINGCFG;
+
+ nn_cfg_writel(hw, NFP_NET_CFG_CTRL, new_ctrl);
+ if (nfp_net_reconfig(hw, new_ctrl, update) < 0)
+ return -EIO;
+
+ hw->ctrl = new_ctrl;
+
+ return 0;
+}
+
+/* Stop device: disable rx and tx functions to allow for reconfiguring. */
+static void
+nfp_net_stop(struct rte_eth_dev *dev)
+{
+ PMD_INIT_LOG(DEBUG, "Stop\n");
+
+ nfp_net_disable_queues(dev);
+}
+
+/* Reset and stop device. The device can not be restarted. */
+static void
+nfp_net_close(struct rte_eth_dev *dev)
+{
+ struct nfp_net_hw *hw;
+
+ PMD_INIT_LOG(DEBUG, "Close\n");
+
+ hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+ /*
+ * We assume that the DPDK application is stopping all the
+ * threads/queues before calling the device close function.
+ */
+
+ nfp_net_stop(dev);
+
+ nn_cfg_writeb(hw, NFP_NET_CFG_LSC, 0xff);
+
+ /*
+ * The ixgbe PMD driver disables the pcie master on the
+ * device. The i40e does not...
+ */
+}
+
+/* Initialise and register driver with DPDK Application */
+static struct eth_dev_ops nfp_net_eth_dev_ops = {
+ .dev_configure = nfp_net_configure,
+ .dev_start = nfp_net_start,
+ .dev_stop = nfp_net_stop,
+ .dev_close = nfp_net_close,
+};
+
+static int
+nfp_net_init(struct rte_eth_dev *eth_dev)
+{
+ struct rte_pci_device *pci_dev;
+ struct nfp_net_hw *hw;
+
+ uint32_t tx_bar_off, rx_bar_off;
+ uint32_t start_q;
+ int stride = 4;
+
+ PMD_INIT_FUNC_TRACE();
+
+ hw = NFP_NET_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
+
+ eth_dev->dev_ops = &nfp_net_eth_dev_ops;
+
+ /* For secondary processes, the primary has done all the work */
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return 0;
+
+ pci_dev = eth_dev->pci_dev;
+ hw->device_id = pci_dev->id.device_id;
+ hw->vendor_id = pci_dev->id.vendor_id;
+ hw->subsystem_device_id = pci_dev->id.subsystem_device_id;
+ hw->subsystem_vendor_id = pci_dev->id.subsystem_vendor_id;
+
+ PMD_INIT_LOG(DEBUG, "nfp_net: device (%u:%u) %u:%u:%u:%u\n",
+ pci_dev->id.vendor_id, pci_dev->id.device_id,
+ pci_dev->addr.domain, pci_dev->addr.bus,
+ pci_dev->addr.devid, pci_dev->addr.function);
+
+ hw->ctrl_bar = (uint8_t *)pci_dev->mem_resource[0].addr;
+ if (hw->ctrl_bar == NULL) {
+ RTE_LOG(ERR, PMD,
+ "hw->ctrl_bar is NULL. BAR0 not configured\n");
+ return -ENODEV;
+ }
+ hw->max_rx_queues = nn_cfg_readl(hw, NFP_NET_CFG_MAX_RXRINGS);
+ hw->max_tx_queues = nn_cfg_readl(hw, NFP_NET_CFG_MAX_TXRINGS);
+
+ /* Work out where in the BAR the queues start. */
+ switch (pci_dev->id.device_id) {
+ case PCI_DEVICE_ID_NFP6000_VF_NIC:
+ start_q = nn_cfg_readl(hw, NFP_NET_CFG_START_TXQ);
+ tx_bar_off = NFP_PCIE_QUEUE(start_q);
+ start_q = nn_cfg_readl(hw, NFP_NET_CFG_START_RXQ);
+ rx_bar_off = NFP_PCIE_QUEUE(start_q);
+ break;
+ default:
+ RTE_LOG(ERR, PMD, "nfp_net: no device ID matching\n");
+ return -ENODEV;
+ }
+
+ PMD_INIT_LOG(DEBUG, "tx_bar_off: 0x%08x\n", tx_bar_off);
+ PMD_INIT_LOG(DEBUG, "rx_bar_off: 0x%08x\n", rx_bar_off);
+
+ hw->tx_bar = (uint8_t *)pci_dev->mem_resource[2].addr + tx_bar_off;
+ hw->rx_bar = (uint8_t *)pci_dev->mem_resource[2].addr + rx_bar_off;
+
+ PMD_INIT_LOG(DEBUG, "ctrl_bar: %p, tx_bar: %p, rx_bar: %p\n",
+ hw->ctrl_bar, hw->tx_bar, hw->rx_bar);
+
+ nfp_net_cfg_queue_setup(hw);
+
+ /* Get some of the read-only fields from the config BAR */
+ hw->ver = nn_cfg_readl(hw, NFP_NET_CFG_VERSION);
+ hw->cap = nn_cfg_readl(hw, NFP_NET_CFG_CAP);
+ hw->max_mtu = nn_cfg_readl(hw, NFP_NET_CFG_MAX_MTU);
+ hw->mtu = hw->max_mtu;
+
+ if (NFD_CFG_MAJOR_VERSION_of(hw->ver) < 2)
+ hw->rx_offset = NFP_NET_RX_OFFSET;
+ else
+ hw->rx_offset = nn_cfg_readl(hw, NFP_NET_CFG_RX_OFFSET_ADDR);
+
+ PMD_INIT_LOG(INFO, "VER: %#x, Maximum supported MTU: %d\n",
+ hw->ver, hw->max_mtu);
+ PMD_INIT_LOG(INFO, "CAP: %#x, %s%s%s%s%s%s%s%s%s\n", hw->cap,
+ hw->cap & NFP_NET_CFG_CTRL_PROMISC ? "PROMISC " : "",
+ hw->cap & NFP_NET_CFG_CTRL_RXCSUM ? "RXCSUM " : "",
+ hw->cap & NFP_NET_CFG_CTRL_TXCSUM ? "TXCSUM " : "",
+ hw->cap & NFP_NET_CFG_CTRL_RXVLAN ? "RXVLAN " : "",
+ hw->cap & NFP_NET_CFG_CTRL_TXVLAN ? "TXVLAN " : "",
+ hw->cap & NFP_NET_CFG_CTRL_SCATTER ? "SCATTER " : "",
+ hw->cap & NFP_NET_CFG_CTRL_GATHER ? "GATHER " : "",
+ hw->cap & NFP_NET_CFG_CTRL_LSO ? "TSO " : "",
+ hw->cap & NFP_NET_CFG_CTRL_RSS ? "RSS " : "");
+
+ pci_dev = eth_dev->pci_dev;
+ hw->ctrl = 0;
+
+ hw->stride_rx = stride;
+ hw->stride_tx = stride;
+
+ PMD_INIT_LOG(INFO, "max_rx_queues: %u, max_tx_queues: %u\n",
+ hw->max_rx_queues, hw->max_tx_queues);
+
+ /* Allocating memory for mac addr */
+ eth_dev->data->mac_addrs = rte_zmalloc("mac_addr", ETHER_ADDR_LEN, 0);
+ if (eth_dev->data->mac_addrs == NULL) {
+ PMD_INIT_LOG(ERR, "Failed to space for MAC address");
+ return -ENOMEM;
+ }
+
+ /* Using random mac addresses for VFs */
+ eth_random_addr(&hw->mac_addr[0]);
+
+ /* Copying mac address to DPDK eth_dev struct */
+ ether_addr_copy(ð_dev->data->mac_addrs[0],
+ (struct ether_addr *)hw->mac_addr);
+
+ PMD_INIT_LOG(INFO, "port %d VendorID=0x%x DeviceID=0x%x "
+ "mac=%02x:%02x:%02x:%02x:%02x:%02x",
+ eth_dev->data->port_id, pci_dev->id.vendor_id,
+ pci_dev->id.device_id,
+ hw->mac_addr[0], hw->mac_addr[1], hw->mac_addr[2],
+ hw->mac_addr[3], hw->mac_addr[4], hw->mac_addr[5]);
+
+ return 0;
+}
+
+static struct rte_pci_id pci_id_nfp_net_map[] = {
+ {
+ .vendor_id = PCI_VENDOR_ID_NETRONOME,
+ .device_id = PCI_DEVICE_ID_NFP6000_PF_NIC,
+ .subsystem_vendor_id = PCI_ANY_ID,
+ .subsystem_device_id = PCI_ANY_ID,
+ },
+ {
+ .vendor_id = PCI_VENDOR_ID_NETRONOME,
+ .device_id = PCI_DEVICE_ID_NFP6000_VF_NIC,
+ .subsystem_vendor_id = PCI_ANY_ID,
+ .subsystem_device_id = PCI_ANY_ID,
+ },
+ {
+ .vendor_id = 0,
+ },
+};
+
+static struct eth_driver rte_nfp_net_pmd = {
+ {
+ .name = "rte_nfp_net_pmd",
+ .id_table = pci_id_nfp_net_map,
+ .drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC,
+ },
+ .eth_dev_init = nfp_net_init,
+ .dev_private_size = sizeof(struct nfp_net_adapter),
+};
+
+static int
+nfp_net_pmd_init(const char *name __rte_unused,
+ const char *params __rte_unused)
+{
+ PMD_INIT_FUNC_TRACE();
+ PMD_INIT_LOG(INFO, "librte_pmd_nfp_net version %s\n",
+ NFP_NET_PMD_VERSION);
+
+ rte_eth_driver_register(&rte_nfp_net_pmd);
+ return 0;
+}
+
+static struct rte_driver rte_nfp_net_driver = {
+ .type = PMD_PDEV,
+ .init = nfp_net_pmd_init,
+};
+
+PMD_REGISTER_DRIVER(rte_nfp_net_driver);
+
+/*
+ * Local variables:
+ * c-file-style: "Linux"
+ * indent-tabs-mode: t
+ * End:
+ */
diff --git a/drivers/net/nfp/nfp_net_ctrl.h b/drivers/net/nfp/nfp_net_ctrl.h
new file mode 100644
index 0000000..fce8251
--- /dev/null
+++ b/drivers/net/nfp/nfp_net_ctrl.h
@@ -0,0 +1,324 @@
+/*
+ * Copyright (c) 2014, 2015 Netronome Systems, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution
+ *
+ * 3. Neither the name of the copyright holder nor the names of its
+ * contributors may be used to endorse or promote products derived from this
+ * software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * vim:shiftwidth=8:noexpandtab
+ *
+ * Netronome network device driver: Control BAR layout
+ */
+#ifndef _NFP_NET_CTRL_H_
+#define _NFP_NET_CTRL_H_
+
+/*
+ * Configuration BAR size.
+ *
+ * The configuration BAR is 8K in size, but on the NFP6000, due to
+ * THB-350, 32k needs to be reserved.
+ */
+#ifdef __NFP_IS_6000
+#define NFP_NET_CFG_BAR_SZ (32 * 1024)
+#else
+#define NFP_NET_CFG_BAR_SZ (8 * 1024)
+#endif
+
+/* Offset in Freelist buffer where packet starts on RX */
+#define NFP_NET_RX_OFFSET 32
+
+/* Hash type pre-pended when a RSS hash was computed */
+#define NFP_NET_RSS_NONE 0
+#define NFP_NET_RSS_IPV4 1
+#define NFP_NET_RSS_IPV6 2
+#define NFP_NET_RSS_IPV6_EX 3
+#define NFP_NET_RSS_IPV4_TCP 4
+#define NFP_NET_RSS_IPV6_TCP 5
+#define NFP_NET_RSS_IPV6_EX_TCP 6
+#define NFP_NET_RSS_IPV4_UDP 7
+#define NFP_NET_RSS_IPV6_UDP 8
+#define NFP_NET_RSS_IPV6_EX_UDP 9
+
+/*
+ * @NFP_NET_TXR_MAX: Maximum number of TX rings
+ * @NFP_NET_TXR_MASK: Mask for TX rings
+ * @NFP_NET_RXR_MAX: Maximum number of RX rings
+ * @NFP_NET_RXR_MASK: Mask for RX rings
+ */
+#define NFP_NET_TXR_MAX 64
+#define NFP_NET_TXR_MASK (NFP_NET_TXR_MAX - 1)
+#define NFP_NET_RXR_MAX 64
+#define NFP_NET_RXR_MASK (NFP_NET_RXR_MAX - 1)
+
+/*
+ * Read/Write config words (0x0000 - 0x002c)
+ * @NFP_NET_CFG_CTRL: Global control
+ * @NFP_NET_CFG_UPDATE: Indicate which fields are updated
+ * @NFP_NET_CFG_TXRS_ENABLE: Bitmask of enabled TX rings
+ * @NFP_NET_CFG_RXRS_ENABLE: Bitmask of enabled RX rings
+ * @NFP_NET_CFG_MTU: Set MTU size
+ * @NFP_NET_CFG_FLBUFSZ: Set freelist buffer size (must be larger than MTU)
+ * @NFP_NET_CFG_EXN: MSI-X table entry for exceptions
+ * @NFP_NET_CFG_LSC: MSI-X table entry for link state changes
+ * @NFP_NET_CFG_MACADDR: MAC address
+ *
+ * TODO:
+ * - define Error details in UPDATE
+ */
+#define NFP_NET_CFG_CTRL 0x0000
+#define NFP_NET_CFG_CTRL_ENABLE (0x1 << 0) /* Global enable */
+#define NFP_NET_CFG_CTRL_PROMISC (0x1 << 1) /* Enable Promisc mode */
+#define NFP_NET_CFG_CTRL_L2BC (0x1 << 2) /* Allow L2 Broadcast */
+#define NFP_NET_CFG_CTRL_L2MC (0x1 << 3) /* Allow L2 Multicast */
+#define NFP_NET_CFG_CTRL_RXCSUM (0x1 << 4) /* Enable RX Checksum */
+#define NFP_NET_CFG_CTRL_TXCSUM (0x1 << 5) /* Enable TX Checksum */
+#define NFP_NET_CFG_CTRL_RXVLAN (0x1 << 6) /* Enable VLAN strip */
+#define NFP_NET_CFG_CTRL_TXVLAN (0x1 << 7) /* Enable VLAN insert */
+#define NFP_NET_CFG_CTRL_SCATTER (0x1 << 8) /* Scatter DMA */
+#define NFP_NET_CFG_CTRL_GATHER (0x1 << 9) /* Gather DMA */
+#define NFP_NET_CFG_CTRL_LSO (0x1 << 10) /* LSO/TSO */
+#define NFP_NET_CFG_CTRL_RINGCFG (0x1 << 16) /* Ring runtime changes */
+#define NFP_NET_CFG_CTRL_RSS (0x1 << 17) /* RSS */
+#define NFP_NET_CFG_CTRL_IRQMOD (0x1 << 18) /* Interrupt moderation */
+#define NFP_NET_CFG_CTRL_RINGPRIO (0x1 << 19) /* Ring priorities */
+#define NFP_NET_CFG_CTRL_MSIXAUTO (0x1 << 20) /* MSI-X auto-masking */
+#define NFP_NET_CFG_CTRL_TXRWB (0x1 << 21) /* Write-back of TX ring*/
+#define NFP_NET_CFG_CTRL_L2SWITCH (0x1 << 22) /* L2 Switch */
+#define NFP_NET_CFG_CTRL_L2SWITCH_LOCAL (0x1 << 23) /* Switch to local */
+#define NFP_NET_CFG_CTRL_VXLAN (0x1 << 24) /* Enable VXLAN */
+#define NFP_NET_CFG_CTRL_NVGRE (0x1 << 25) /* Enable NVGRE */
+#define NFP_NET_CFG_UPDATE 0x0004
+#define NFP_NET_CFG_UPDATE_GEN (0x1 << 0) /* General update */
+#define NFP_NET_CFG_UPDATE_RING (0x1 << 1) /* Ring config change */
+#define NFP_NET_CFG_UPDATE_RSS (0x1 << 2) /* RSS config change */
+#define NFP_NET_CFG_UPDATE_TXRPRIO (0x1 << 3) /* TX Ring prio change */
+#define NFP_NET_CFG_UPDATE_RXRPRIO (0x1 << 4) /* RX Ring prio change */
+#define NFP_NET_CFG_UPDATE_MSIX (0x1 << 5) /* MSI-X change */
+#define NFP_NET_CFG_UPDATE_L2SWITCH (0x1 << 6) /* Switch changes */
+#define NFP_NET_CFG_UPDATE_RESET (0x1 << 7) /* Update due to FLR */
+#define NFP_NET_CFG_UPDATE_IRQMOD (0x1 << 8) /* IRQ mod change */
+#define NFP_NET_CFG_UPDATE_VXLAN (0x1 << 9) /* VXLAN port change */
+#define NFP_NET_CFG_UPDATE_ERR (0x1 << 31) /* A error occurred */
+#define NFP_NET_CFG_TXRS_ENABLE 0x0008
+#define NFP_NET_CFG_RXRS_ENABLE 0x0010
+#define NFP_NET_CFG_MTU 0x0018
+#define NFP_NET_CFG_FLBUFSZ 0x001c
+#define NFP_NET_CFG_EXN 0x001f
+#define NFP_NET_CFG_LSC 0x0020
+#define NFP_NET_CFG_MACADDR 0x0024
+
+/*
+ * Read-only words (0x0030 - 0x0050):
+ * @NFP_NET_CFG_VERSION: Firmware version number
+ * @NFP_NET_CFG_STS: Status
+ * @NFP_NET_CFG_CAP: Capabilities (same bits as @NFP_NET_CFG_CTRL)
+ * @NFP_NET_MAX_TXRINGS: Maximum number of TX rings
+ * @NFP_NET_MAX_RXRINGS: Maximum number of RX rings
+ * @NFP_NET_MAX_MTU: Maximum support MTU
+ * @NFP_NET_CFG_START_TXQ: Start Queue Control Queue to use for TX (PF only)
+ * @NFP_NET_CFG_START_RXQ: Start Queue Control Queue to use for RX (PF only)
+ *
+ * TODO:
+ * - define more STS bits
+ */
+#define NFP_NET_CFG_VERSION 0x0030
+#define NFP_NET_CFG_VERSION_RESERVED_MASK (0xff << 24)
+#define NFP_NET_CFG_VERSION_CLASS_MASK (0xff << 16)
+#define NFP_NET_CFG_VERSION_CLASS(x) (((x) & 0xff) << 16)
+#define NFP_NET_CFG_VERSION_CLASS_GENERIC 0
+#define NFP_NET_CFG_VERSION_MAJOR_MASK (0xff << 8)
+#define NFP_NET_CFG_VERSION_MAJOR(x) (((x) & 0xff) << 8)
+#define NFP_NET_CFG_VERSION_MINOR_MASK (0xff << 0)
+#define NFP_NET_CFG_VERSION_MINOR(x) (((x) & 0xff) << 0)
+#define NFP_NET_CFG_STS 0x0034
+#define NFP_NET_CFG_STS_LINK (0x1 << 0) /* Link up or down */
+#define NFP_NET_CFG_CAP 0x0038
+#define NFP_NET_CFG_MAX_TXRINGS 0x003c
+#define NFP_NET_CFG_MAX_RXRINGS 0x0040
+#define NFP_NET_CFG_MAX_MTU 0x0044
+/* Next two words are being used by VFs for solving THB350 issue */
+#define NFP_NET_CFG_START_TXQ 0x0048
+#define NFP_NET_CFG_START_RXQ 0x004c
+
+/*
+ * NFP-3200 workaround (0x0050 - 0x0058)
+ * @NFP_NET_CFG_SPARE_ADDR: DMA address for ME code to use (e.g. YDS-155 fix)
+ */
+#define NFP_NET_CFG_SPARE_ADDR 0x0050
+/**
+ * NFP6000/NFP4000 - Prepend configuration
+ */
+#define NFP_NET_CFG_RX_OFFSET 0x0050
+#define NFP_NET_CFG_RX_OFFSET_DYNAMIC 0 /* Prepend mode */
+
+/**
+ * Reuse spare address to contain the offset from the start of
+ * the host buffer where the first byte of the received frame
+ * will land. Any metadata will come prior to that offset. If the
+ * value in this field is 0, it means that that the metadata will
+ * always land starting at the first byte of the host buffer and
+ * packet data will immediately follow the metadata. As always,
+ * the RX descriptor indicates the presence or absence of metadata
+ * along with the length thereof.
+ */
+#define NFP_NET_CFG_RX_OFFSET_ADDR 0x0050
+
+#define NFP_NET_CFG_VXLAN_PORT 0x0060
+#define NFP_NET_CFG_VXLAN_SZ 0x0008
+
+/* Offload definitions */
+#define NFP_NET_N_VXLAN_PORTS (NFP_NET_CFG_VXLAN_SZ / sizeof(uint16_t))
+
+/**
+ * 64B reserved for future use (0x0080 - 0x00c0)
+ */
+#define NFP_NET_CFG_RESERVED 0x0080
+#define NFP_NET_CFG_RESERVED_SZ 0x0040
+
+/*
+ * RSS configuration (0x0100 - 0x01ac):
+ * Used only when NFP_NET_CFG_CTRL_RSS is enabled
+ * @NFP_NET_CFG_RSS_CFG: RSS configuration word
+ * @NFP_NET_CFG_RSS_KEY: RSS "secret" key
+ * @NFP_NET_CFG_RSS_ITBL: RSS indirection table
+ */
+#define NFP_NET_CFG_RSS_BASE 0x0100
+#define NFP_NET_CFG_RSS_CTRL NFP_NET_CFG_RSS_BASE
+#define NFP_NET_CFG_RSS_MASK (0x7f)
+#define NFP_NET_CFG_RSS_MASK_of(_x) ((_x) & 0x7f)
+#define NFP_NET_CFG_RSS_IPV4 (1 << 8) /* RSS for IPv4 */
+#define NFP_NET_CFG_RSS_IPV6 (1 << 9) /* RSS for IPv6 */
+#define NFP_NET_CFG_RSS_IPV4_TCP (1 << 10) /* RSS for IPv4/TCP */
+#define NFP_NET_CFG_RSS_IPV4_UDP (1 << 11) /* RSS for IPv4/UDP */
+#define NFP_NET_CFG_RSS_IPV6_TCP (1 << 12) /* RSS for IPv6/TCP */
+#define NFP_NET_CFG_RSS_IPV6_UDP (1 << 13) /* RSS for IPv6/UDP */
+#define NFP_NET_CFG_RSS_TOEPLITZ (1 << 24) /* Use Toeplitz hash */
+#define NFP_NET_CFG_RSS_KEY (NFP_NET_CFG_RSS_BASE + 0x4)
+#define NFP_NET_CFG_RSS_KEY_SZ 0x28
+#define NFP_NET_CFG_RSS_ITBL (NFP_NET_CFG_RSS_BASE + 0x4 + \
+ NFP_NET_CFG_RSS_KEY_SZ)
+#define NFP_NET_CFG_RSS_ITBL_SZ 0x80
+
+/*
+ * TX ring configuration (0x200 - 0x800)
+ * @NFP_NET_CFG_TXR_BASE: Base offset for TX ring configuration
+ * @NFP_NET_CFG_TXR_ADDR: Per TX ring DMA address (8B entries)
+ * @NFP_NET_CFG_TXR_WB_ADDR: Per TX ring write back DMA address (8B entries)
+ * @NFP_NET_CFG_TXR_SZ: Per TX ring ring size (1B entries)
+ * @NFP_NET_CFG_TXR_VEC: Per TX ring MSI-X table entry (1B entries)
+ * @NFP_NET_CFG_TXR_PRIO: Per TX ring priority (1B entries)
+ * @NFP_NET_CFG_TXR_IRQ_MOD: Per TX ring interrupt moderation (4B entries)
+ */
+#define NFP_NET_CFG_TXR_BASE 0x0200
+#define NFP_NET_CFG_TXR_ADDR(_x) (NFP_NET_CFG_TXR_BASE + ((_x) * 0x8))
+#define NFP_NET_CFG_TXR_WB_ADDR(_x) (NFP_NET_CFG_TXR_BASE + 0x200 + \
+ ((_x) * 0x8))
+#define NFP_NET_CFG_TXR_SZ(_x) (NFP_NET_CFG_TXR_BASE + 0x400 + (_x))
+#define NFP_NET_CFG_TXR_VEC(_x) (NFP_NET_CFG_TXR_BASE + 0x440 + (_x))
+#define NFP_NET_CFG_TXR_PRIO(_x) (NFP_NET_CFG_TXR_BASE + 0x480 + (_x))
+#define NFP_NET_CFG_TXR_IRQ_MOD(_x) (NFP_NET_CFG_TXR_BASE + 0x500 + \
+ ((_x) * 0x4))
+
+/*
+ * RX ring configuration (0x0800 - 0x0c00)
+ * @NFP_NET_CFG_RXR_BASE: Base offset for RX ring configuration
+ * @NFP_NET_CFG_RXR_ADDR: Per TX ring DMA address (8B entries)
+ * @NFP_NET_CFG_RXR_SZ: Per TX ring ring size (1B entries)
+ * @NFP_NET_CFG_RXR_VEC: Per TX ring MSI-X table entry (1B entries)
+ * @NFP_NET_CFG_RXR_PRIO: Per TX ring priority (1B entries)
+ * @NFP_NET_CFG_RXR_IRQ_MOD: Per TX ring interrupt moderation (4B entries)
+ */
+#define NFP_NET_CFG_RXR_BASE 0x0800
+#define NFP_NET_CFG_RXR_ADDR(_x) (NFP_NET_CFG_RXR_BASE + ((_x) * 0x8))
+#define NFP_NET_CFG_RXR_SZ(_x) (NFP_NET_CFG_RXR_BASE + 0x200 + (_x))
+#define NFP_NET_CFG_RXR_VEC(_x) (NFP_NET_CFG_RXR_BASE + 0x240 + (_x))
+#define NFP_NET_CFG_RXR_PRIO(_x) (NFP_NET_CFG_RXR_BASE + 0x280 + (_x))
+#define NFP_NET_CFG_RXR_IRQ_MOD(_x) (NFP_NET_CFG_RXR_BASE + 0x300 + \
+ ((_x) * 0x4))
+
+/*
+ * Interrupt Control/Cause registers (0x0c00 - 0x0d00)
+ * These registers are only used when MSI-X auto-masking is not
+ * enabled (@NFP_NET_CFG_CTRL_MSIXAUTO not set). The array is index
+ * by MSI-X entry and are 1B in size. If an entry is zero, the
+ * corresponding entry is enabled. If the FW generates an interrupt,
+ * it writes a cause into the corresponding field. This also masks
+ * the MSI-X entry and the host driver must clear the register to
+ * re-enable the interrupt.
+ */
+#define NFP_NET_CFG_ICR_BASE 0x0c00
+#define NFP_NET_CFG_ICR(_x) (NFP_NET_CFG_ICR_BASE + (_x))
+#define NFP_NET_CFG_ICR_UNMASKED 0x0
+#define NFP_NET_CFG_ICR_RXTX 0x1
+#define NFP_NET_CFG_ICR_LSC 0x2
+
+/*
+ * General device stats (0x0d00 - 0x0d90)
+ * all counters are 64bit.
+ */
+#define NFP_NET_CFG_STATS_BASE 0x0d00
+#define NFP_NET_CFG_STATS_RX_DISCARDS (NFP_NET_CFG_STATS_BASE + 0x00)
+#define NFP_NET_CFG_STATS_RX_ERRORS (NFP_NET_CFG_STATS_BASE + 0x08)
+#define NFP_NET_CFG_STATS_RX_OCTETS (NFP_NET_CFG_STATS_BASE + 0x10)
+#define NFP_NET_CFG_STATS_RX_UC_OCTETS (NFP_NET_CFG_STATS_BASE + 0x18)
+#define NFP_NET_CFG_STATS_RX_MC_OCTETS (NFP_NET_CFG_STATS_BASE + 0x20)
+#define NFP_NET_CFG_STATS_RX_BC_OCTETS (NFP_NET_CFG_STATS_BASE + 0x28)
+#define NFP_NET_CFG_STATS_RX_FRAMES (NFP_NET_CFG_STATS_BASE + 0x30)
+#define NFP_NET_CFG_STATS_RX_MC_FRAMES (NFP_NET_CFG_STATS_BASE + 0x38)
+#define NFP_NET_CFG_STATS_RX_BC_FRAMES (NFP_NET_CFG_STATS_BASE + 0x40)
+
+#define NFP_NET_CFG_STATS_TX_DISCARDS (NFP_NET_CFG_STATS_BASE + 0x48)
+#define NFP_NET_CFG_STATS_TX_ERRORS (NFP_NET_CFG_STATS_BASE + 0x50)
+#define NFP_NET_CFG_STATS_TX_OCTETS (NFP_NET_CFG_STATS_BASE + 0x58)
+#define NFP_NET_CFG_STATS_TX_UC_OCTETS (NFP_NET_CFG_STATS_BASE + 0x60)
+#define NFP_NET_CFG_STATS_TX_MC_OCTETS (NFP_NET_CFG_STATS_BASE + 0x68)
+#define NFP_NET_CFG_STATS_TX_BC_OCTETS (NFP_NET_CFG_STATS_BASE + 0x70)
+#define NFP_NET_CFG_STATS_TX_FRAMES (NFP_NET_CFG_STATS_BASE + 0x78)
+#define NFP_NET_CFG_STATS_TX_MC_FRAMES (NFP_NET_CFG_STATS_BASE + 0x80)
+#define NFP_NET_CFG_STATS_TX_BC_FRAMES (NFP_NET_CFG_STATS_BASE + 0x88)
+
+/*
+ * Per ring stats (0x1000 - 0x1800)
+ * options, 64bit per entry
+ * @NFP_NET_CFG_TXR_STATS: TX ring statistics (Packet and Byte count)
+ * @NFP_NET_CFG_RXR_STATS: RX ring statistics (Packet and Byte count)
+ */
+#define NFP_NET_CFG_TXR_STATS_BASE 0x1000
+#define NFP_NET_CFG_TXR_STATS(_x) (NFP_NET_CFG_TXR_STATS_BASE + \
+ ((_x) * 0x10))
+#define NFP_NET_CFG_RXR_STATS_BASE 0x1400
+#define NFP_NET_CFG_RXR_STATS(_x) (NFP_NET_CFG_RXR_STATS_BASE + \
+ ((_x) * 0x10))
+
+#endif /* _NFP_NET_CTRL_H_ */
+/*
+ * Local variables:
+ * c-file-style: "Linux"
+ * indent-tabs-mode: t
+ * End:
+ */
diff --git a/drivers/net/nfp/nfp_net_logs.h b/drivers/net/nfp/nfp_net_logs.h
new file mode 100644
index 0000000..0b966e4
--- /dev/null
+++ b/drivers/net/nfp/nfp_net_logs.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2014, 2015 Netronome Systems, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution
+ *
+ * 3. Neither the name of the copyright holder nor the names of its
+ * contributors may be used to endorse or promote products derived from this
+ * software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _NFP_NET_LOGS_H_
+#define _NFP_NET_LOGS_H_
+
+#include <rte_log.h>
+
+#define RTE_LIBRTE_NFP_NET_DEBUG_INIT 1
+
+#ifdef RTE_LIBRTE_NFP_NET_DEBUG_INIT
+#define PMD_INIT_LOG(level, fmt, args...) \
+ RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
+#define PMD_INIT_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>")
+#else
+#define PMD_INIT_LOG(level, fmt, args...) do { } while (0)
+#define PMD_INIT_FUNC_TRACE() do { } while (0)
+#endif
+
+#ifdef RTE_LIBRTE_NFP_NET_DEBUG_RX
+#define PMD_RX_LOG(level, fmt, args...) \
+ RTE_LOG(level, PMD, "%s() rx: " fmt, __func__, ## args)
+#else
+#define PMD_RX_LOG(level, fmt, args...) do { } while (0)
+#endif
+
+#ifdef RTE_LIBRTE_NFP_NET_DEBUG_TX
+#define PMD_TX_LOG(level, fmt, args...) \
+ RTE_LOG(level, PMD, "%s() tx: " fmt, __func__, ## args)
+#else
+#define PMD_TX_LOG(level, fmt, args...) do { } while (0)
+#endif
+
+#ifdef RTE_LIBRTE_NFP_NET_DEBUG_DRIVER
+#define PMD_DRV_LOG(level, fmt, args...) \
+ RTE_LOG(level, PMD, "%s(): " fmt, __func__, ## args)
+#else
+#define PMD_DRV_LOG(level, fmt, args...) do { } while (0)
+#endif
+
+#ifdef RTE_LIBRTE_NFP_NET_DEBUG_INIT
+#define ASSERT(x) if (!(x)) rte_panic("NFP_NET: x")
+#else
+#define ASSERT(x) do { } while (0)
+#endif
+
+#endif /* _NFP_NET_LOGS_H_ */
diff --git a/drivers/net/nfp/nfp_net_pmd.h b/drivers/net/nfp/nfp_net_pmd.h
new file mode 100644
index 0000000..b0a21af
--- /dev/null
+++ b/drivers/net/nfp/nfp_net_pmd.h
@@ -0,0 +1,453 @@
+/*
+ * Copyright (c) 2014, 2015 Netronome Systems, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution
+ *
+ * 3. Neither the name of the copyright holder nor the names of its
+ * contributors may be used to endorse or promote products derived from this
+ * software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * vim:shiftwidth=8:noexpandtab
+ *
+ * @file dpdk/pmd/nfp_net_pmd.h
+ *
+ * Netronome NFP_NET PDM driver
+ */
+
+#ifndef _NFP_NET_PMD_H_
+#define _NFP_NET_PMD_H_
+
+#define NFP_NET_PMD_VERSION "0.1"
+#define PCI_VENDOR_ID_NETRONOME 0x19ee
+#define PCI_DEVICE_ID_NFP6000_PF_NIC 0x6000
+#define PCI_DEVICE_ID_NFP6000_VF_NIC 0x6003
+
+/* Forward declaration */
+struct nfp_net_adapter;
+
+/*
+ * The maximum number of descriptors is limited by design as
+ * DPDK uses uint16_t variables for these values
+ */
+#define NFP_NET_MAX_TX_DESC (32 * 1024)
+#define NFP_NET_MIN_TX_DESC 64
+
+#define NFP_NET_MAX_RX_DESC (32 * 1024)
+#define NFP_NET_MIN_RX_DESC 64
+
+/* Bar allocation */
+#define NFP_NET_CRTL_BAR 0
+#define NFP_NET_TX_BAR 2
+#define NFP_NET_RX_BAR 2
+
+/* Macros for accessing the Queue Controller Peripheral 'CSRs' */
+#define NFP_QCP_QUEUE_OFF(_x) ((_x) * 0x800)
+#define NFP_QCP_QUEUE_ADD_RPTR 0x0000
+#define NFP_QCP_QUEUE_ADD_WPTR 0x0004
+#define NFP_QCP_QUEUE_STS_LO 0x0008
+#define NFP_QCP_QUEUE_STS_LO_READPTR_mask (0x3ffff)
+#define NFP_QCP_QUEUE_STS_HI 0x000c
+#define NFP_QCP_QUEUE_STS_HI_WRITEPTR_mask (0x3ffff)
+
+/* Interrupt definitions */
+#define NFP_NET_IRQ_LSC_IDX 0
+
+#define RTE_MBUF_DATA_DMA_ADDR(mb) \
+ ((uint64_t)((mb)->buf_physaddr + (mb)->data_off))
+
+/* Default values for RX/TX configuration */
+#define DEFAULT_RX_FREE_THRESH 32
+#define DEFAULT_RX_PTHRESH 8
+#define DEFAULT_RX_HTHRESH 8
+#define DEFAULT_RX_WTHRESH 0
+
+#define DEFAULT_TX_RS_THRESH 32
+#define DEFAULT_TX_FREE_THRESH 32
+#define DEFAULT_TX_PTHRESH 32
+#define DEFAULT_TX_HTHRESH 0
+#define DEFAULT_TX_WTHRESH 0
+#define DEFAULT_TX_RSBIT_THRESH 32
+
+/* Alignment for dma zones */
+#define NFP_MEMZONE_ALIGN 128
+
+/*
+ * This is used by the reconfig protocol. It sets the maximum time waiting in
+ * milliseconds before a reconfig timeout happens.
+ */
+#define NFP_NET_POLL_TIMEOUT 5000
+
+#define NFP_QCP_QUEUE_ADDR_SZ (0x800)
+
+#define NFP_NET_LINK_DOWN_CHECK_TIMEOUT 4000 /* ms */
+#define NFP_NET_LINK_UP_CHECK_TIMEOUT 1000 /* ms */
+
+/* Version number helper defines */
+#define NFD_CFG_CLASS_VER_msk 0xff
+#define NFD_CFG_CLASS_VER_shf 24
+#define NFD_CFG_CLASS_VER(x) (((x) & 0xff) << 24)
+#define NFD_CFG_CLASS_VER_of(x) (((x) >> 24) & 0xff)
+#define NFD_CFG_CLASS_TYPE_msk 0xff
+#define NFD_CFG_CLASS_TYPE_shf 16
+#define NFD_CFG_CLASS_TYPE(x) (((x) & 0xff) << 16)
+#define NFD_CFG_CLASS_TYPE_of(x) (((x) >> 16) & 0xff)
+#define NFD_CFG_MAJOR_VERSION_msk 0xff
+#define NFD_CFG_MAJOR_VERSION_shf 8
+#define NFD_CFG_MAJOR_VERSION(x) (((x) & 0xff) << 8)
+#define NFD_CFG_MAJOR_VERSION_of(x) (((x) >> 8) & 0xff)
+#define NFD_CFG_MINOR_VERSION_msk 0xff
+#define NFD_CFG_MINOR_VERSION_shf 0
+#define NFD_CFG_MINOR_VERSION(x) (((x) & 0xff) << 0)
+#define NFD_CFG_MINOR_VERSION_of(x) (((x) >> 0) & 0xff)
+
+#include <linux/types.h>
+
+static inline uint8_t nn_readb(volatile const void *addr)
+{
+ return *((volatile const uint8_t *)(addr));
+}
+
+static inline void nn_writeb(__u8 val, volatile void *addr)
+{
+ *((volatile uint8_t *)(addr)) = val;
+}
+
+static inline uint32_t nn_readl(volatile const void *addr)
+{
+ return *((volatile const uint32_t *)(addr));
+}
+
+static inline void nn_writel(uint32_t val, volatile void *addr)
+{
+ *((volatile uint32_t *)(addr)) = val;
+}
+
+static inline uint64_t nn_readq(volatile void *addr)
+{
+ const volatile uint32_t *p = addr;
+ uint32_t low, high;
+
+ high = nn_readl((volatile const void *)(p + 1));
+ low = nn_readl((volatile const void *)p);
+
+ return low + ((uint64_t)high << 32);
+}
+
+static inline void nn_writeq(uint64_t val, volatile void *addr)
+{
+ nn_writel(val >> 32, (volatile char *)addr + 4);
+ nn_writel(val, addr);
+}
+
+/* TX descriptor format */
+#define PCIE_DESC_TX_EOP (1 << 7)
+#define PCIE_DESC_TX_OFFSET_MASK (0x7f)
+
+/* Flags in the host TX descriptor */
+#define PCIE_DESC_TX_CSUM (1 << 7)
+#define PCIE_DESC_TX_IP4_CSUM (1 << 6)
+#define PCIE_DESC_TX_TCP_CSUM (1 << 5)
+#define PCIE_DESC_TX_UDP_CSUM (1 << 4)
+#define PCIE_DESC_TX_VLAN (1 << 3)
+#define PCIE_DESC_TX_LSO (1 << 2)
+#define PCIE_DESC_TX_ENCAP_NONE (0)
+#define PCIE_DESC_TX_ENCAP_VXLAN (1 << 1)
+#define PCIE_DESC_TX_ENCAP_GRE (1 << 0)
+
+struct nfp_net_tx_desc {
+ union {
+ struct {
+ __u8 dma_addr_hi; /* High bits of host buf address */
+ __le16 dma_len; /* Length to DMA for this desc */
+ __u8 offset_eop; /* Offset in buf where pkt starts +
+ * highest bit is eop flag.
+ */
+ __le32 dma_addr_lo; /* Low 32bit of host buf addr */
+
+ __le16 lso; /* MSS to be used for LSO */
+ __u8 l4_offset; /* LSO, where the L4 data starts */
+ __u8 flags; /* TX Flags, see @PCIE_DESC_TX_* */
+
+ __le16 vlan; /* VLAN tag to add if indicated */
+ __le16 data_len; /* Length of frame + meta data */
+ } __attribute__((__packed__));
+ __le32 vals[4];
+ };
+};
+
+struct nfp_net_txq {
+ struct nfp_net_hw *hw; /* Backpointer to nfp_net structure */
+
+ /*
+ * Queue information: @qidx is the queue index from Linux's
+ * perspective. @tx_qcidx is the index of the Queue
+ * Controller Peripheral queue relative to the TX queue BAR.
+ * @cnt is the size of the queue in number of
+ * descriptors. @qcp_q is a pointer to the base of the queue
+ * structure on the NFP
+ */
+ __u8 *qcp_q;
+
+ /*
+ * Read and Write pointers. @wr_p and @rd_p are host side pointer,
+ * they are free running and have little relation to the QCP pointers *
+ * @qcp_rd_p is a local copy queue controller peripheral read pointer
+ */
+
+ uint32_t wr_p;
+ uint32_t rd_p;
+ uint32_t qcp_rd_p;
+
+ uint32_t tx_count;
+
+ uint32_t tx_free_thresh;
+ uint32_t tail;
+
+ /*
+ * For each descriptor keep a reference to the mbuff and
+ * DMA address used until completion is signalled.
+ */
+ struct {
+ struct rte_mbuf *mbuf;
+ } *txbufs;
+
+ /*
+ * Information about the host side queue location. @txds is
+ * the virtual address for the queue, @dma is the DMA address
+ * of the queue and @size is the size in bytes for the queue
+ * (needed for free)
+ */
+ struct nfp_net_tx_desc *txds;
+
+ /*
+ * At this point 56 bytes have been used for all the fields in the
+ * TX critical path. We have room for 8 bytes and still all placed
+ * in a cache line. We are not using the threshold values below nor
+ * the txq_flags but if we need to, we can add the most used in the
+ * remaining bytes.
+ */
+ uint32_t tx_rs_thresh; /* not used by now. Future? */
+ uint32_t tx_pthresh; /* not used by now. Future? */
+ uint32_t tx_hthresh; /* not used by now. Future? */
+ uint32_t tx_wthresh; /* not used by now. Future? */
+ uint32_t txq_flags; /* not used by now. Future? */
+ __u8 port_id;
+ int qidx;
+ int tx_qcidx;
+ __le64 dma;
+} __attribute__ ((__aligned__(64)));
+
+/* RX and freelist descriptor format */
+#define PCIE_DESC_RX_DD (1 << 7)
+#define PCIE_DESC_RX_META_LEN_MASK (0x7f)
+
+/* Flags in the RX descriptor */
+#define PCIE_DESC_RX_RSS (1 << 15)
+#define PCIE_DESC_RX_I_IP4_CSUM (1 << 14)
+#define PCIE_DESC_RX_I_IP4_CSUM_OK (1 << 13)
+#define PCIE_DESC_RX_I_TCP_CSUM (1 << 12)
+#define PCIE_DESC_RX_I_TCP_CSUM_OK (1 << 11)
+#define PCIE_DESC_RX_I_UDP_CSUM (1 << 10)
+#define PCIE_DESC_RX_I_UDP_CSUM_OK (1 << 9)
+#define PCIE_DESC_RX_INGRESS_PORT (1 << 8)
+#define PCIE_DESC_RX_EOP (1 << 7)
+#define PCIE_DESC_RX_IP4_CSUM (1 << 6)
+#define PCIE_DESC_RX_IP4_CSUM_OK (1 << 5)
+#define PCIE_DESC_RX_TCP_CSUM (1 << 4)
+#define PCIE_DESC_RX_TCP_CSUM_OK (1 << 3)
+#define PCIE_DESC_RX_UDP_CSUM (1 << 2)
+#define PCIE_DESC_RX_UDP_CSUM_OK (1 << 1)
+#define PCIE_DESC_RX_VLAN (1 << 0)
+
+struct nfp_net_rx_desc {
+ union {
+ /* Freelist descriptor */
+ struct {
+ __u8 dma_addr_hi;
+ __le16 spare;
+ __u8 dd;
+
+ __le32 dma_addr_lo;
+ } __attribute__((__packed__)) fld;
+
+ /* RX descriptor */
+ struct {
+ __le16 data_len;
+ __u8 reserved;
+ __u8 meta_len_dd;
+
+ __le16 flags;
+ __le16 vlan;
+ } __attribute__((__packed__)) rxd;
+
+ __le32 vals[2];
+ };
+};
+
+struct nfp_net_rx_buff {
+ struct rte_mbuf *mbuf;
+};
+
+struct nfp_net_rxq {
+ struct nfp_net_hw *hw; /* Backpointer to nfp_net structure */
+
+ /*
+ * @qcp_fl and @qcp_rx are pointers to the base addresses of the
+ * freelist and RX queue controller peripheral queue structures on the
+ * NFP
+ */
+ __u8 *qcp_fl;
+ __u8 *qcp_rx;
+
+ /*
+ * Read and Write pointers. @wr_p and @rd_p are host side
+ * pointer, they are free running and have little relation to
+ * the QCP pointers. @wr_p is where the driver adds new
+ * freelist descriptors and @rd_p is where the driver start
+ * reading descriptors for newly arrive packets from.
+ */
+ uint32_t wr_p;
+ uint32_t rd_p;
+
+ /*
+ * For each buffer placed on the freelist, record the
+ * associated SKB
+ */
+ struct nfp_net_rx_buff *rxbufs;
+
+ /*
+ * Information about the host side queue location. @rxds is
+ * the virtual address for the queue
+ */
+ struct nfp_net_rx_desc *rxds;
+
+ /*
+ * The mempool is created by the user specifying a mbuf size.
+ * We save here the reference of the mempool needed in the RX
+ * path and the mbuf size for checking received packets can be
+ * safely copied to the mbuf using the NFP_NET_RX_OFFSET
+ */
+ struct rte_mempool *mem_pool;
+ uint16_t mbuf_size;
+
+ /*
+ * Next two fields are used for giving more free descriptors
+ * to the NFP
+ */
+ uint16_t rx_free_thresh;
+ uint16_t nb_rx_hold;
+
+ /* the size of the queue in number of descriptors */
+ uint16_t rx_count;
+
+ /*
+ * Fields above this point fit in a single cache line and are all used
+ * in the RX critical path. Fields below this point are just used
+ * during queue configuration or not used at all (yet)
+ */
+
+ /* referencing dev->data->port_id */
+ uint16_t port_id;
+
+ uint8_t crc_len; /* Not used by now */
+ uint8_t drop_en; /* Not used by now */
+
+ /* DMA address of the queue */
+ __le64 dma;
+
+ /*
+ * Queue information: @qidx is the queue index from Linux's
+ * perspective. @fl_qcidx is the index of the Queue
+ * Controller peripheral queue relative to the RX queue BAR
+ * used for the freelist and @rx_qcidx is the Queue Controller
+ * Peripheral index for the RX queue.
+ */
+ int qidx;
+ int fl_qcidx;
+ int rx_qcidx;
+} __attribute__ ((__aligned__(64)));
+
+struct nfp_net_hw {
+ /* Info from the firmware */
+ uint32_t ver;
+ uint32_t cap;
+ uint32_t max_mtu;
+ uint32_t mtu;
+ uint32_t rx_offset;
+
+ /* Current values for control */
+ uint32_t ctrl;
+
+ uint8_t *ctrl_bar;
+ uint8_t *tx_bar;
+ uint8_t *rx_bar;
+
+ int stride_rx;
+ int stride_tx;
+
+ __u8 *qcp_cfg;
+
+ uint32_t max_tx_queues;
+ uint32_t max_rx_queues;
+ uint16_t flbufsz;
+ uint16_t device_id;
+ uint16_t vendor_id;
+ uint16_t subsystem_device_id;
+ uint16_t subsystem_vendor_id;
+#if defined(DSTQ_SELECTION)
+#if DSTQ_SELECTION
+ uint16_t device_function;
+#endif
+#endif
+
+ uint8_t mac_addr[ETHER_ADDR_LEN];
+
+ /* Records starting point for counters */
+ struct rte_eth_stats eth_stats_base;
+
+#ifdef NFP_NET_LIBNFP
+ struct nfp_cpp *cpp;
+ struct nfp_cpp_area *ctrl_area;
+ struct nfp_cpp_area *tx_area;
+ struct nfp_cpp_area *rx_area;
+ struct nfp_cpp_area *msix_area;
+#endif
+};
+
+struct nfp_net_adapter {
+ struct nfp_net_hw hw;
+};
+
+#define NFP_NET_DEV_PRIVATE_TO_HW(adapter)\
+ (&((struct nfp_net_adapter *)adapter)->hw)
+
+#endif /* _NFP_NET_PMD_H_ */
+/*
+ * Local variables:
+ * c-file-style: "Linux"
+ * indent-tabs-mode: t
+ * End:
+ */
diff --git a/drivers/net/nfp/rte_pmd_nfp_version.map b/drivers/net/nfp/rte_pmd_nfp_version.map
new file mode 100644
index 0000000..ad607bb
--- /dev/null
+++ b/drivers/net/nfp/rte_pmd_nfp_version.map
@@ -0,0 +1,3 @@
+DPDK_2.2 {
+ local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 148653e..83737cf 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -144,6 +144,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
_LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += -lrte_pmd_e1000
_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -lrte_pmd_mlx4
_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += -lrte_pmd_mlx5
+_LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += -lrte_pmd_nfp
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SZEDATA2) += -lrte_pmd_szedata2
_LDLIBS-$(CONFIG_RTE_LIBRTE_MPIPE_PMD) += -lrte_pmd_mpipe -lgxio
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_RING) += -lrte_pmd_ring
--
1.7.9.5
next prev parent reply other threads:[~2015-11-26 9:49 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-26 9:49 [dpdk-dev] [PATCH v9 0/9] support for netronome nfp-6xxx card Alejandro Lucero
2015-11-26 9:49 ` Alejandro Lucero [this message]
2015-11-26 18:14 ` [dpdk-dev] [PATCH v9 1/9] nfp: basic initialization Stephen Hemminger
2015-11-27 7:51 ` Alejandro Lucero
2015-11-27 9:18 ` Thomas Monjalon
2015-11-26 9:49 ` [dpdk-dev] [PATCH v9 2/9] nfp: adding rx/tx functionality Alejandro Lucero
2015-11-26 9:49 ` [dpdk-dev] [PATCH v9 3/9] nfp: adding rss Alejandro Lucero
2015-11-26 9:49 ` [dpdk-dev] [PATCH v9 4/9] nfp: adding stats Alejandro Lucero
2015-11-26 9:49 ` [dpdk-dev] [PATCH v9 5/9] nfp: adding link functionality Alejandro Lucero
2015-11-26 9:49 ` [dpdk-dev] [PATCH v9 6/9] nfp: adding extra functionality Alejandro Lucero
2015-11-26 9:49 ` [dpdk-dev] [PATCH v9 7/9] nfp: link status change interrupt support Alejandro Lucero
2015-11-26 9:49 ` [dpdk-dev] [PATCH v9 8/9] nfp: adding nic guide Alejandro Lucero
2015-11-26 9:49 ` [dpdk-dev] [PATCH v9 9/9] nfp: updating maintainers Alejandro Lucero
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1448531369-8808-2-git-send-email-alejandro.lucero@netronome.com \
--to=alejandro.lucero@netronome.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).