From: Jerin Jacob <jerin.jacob@caviumnetworks.com>
To: <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v3 1/2] config: arm64: create common arm64 configs under common_arm64 file
Date: Fri, 27 Nov 2015 19:04:27 +0530 [thread overview]
Message-ID: <1448631268-10692-2-git-send-email-jerin.jacob@caviumnetworks.com> (raw)
In-Reply-To: <1448631268-10692-1-git-send-email-jerin.jacob@caviumnetworks.com>
let each armv8 machine targets capture only the differences
between the common arm64 config.
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
---
config/common_arm64 | 48 ++++++++++++++++++++++++++++
config/defconfig_arm64-armv8a-linuxapp-gcc | 18 +----------
config/defconfig_arm64-thunderx-linuxapp-gcc | 18 +----------
config/defconfig_arm64-xgene1-linuxapp-gcc | 18 +----------
4 files changed, 51 insertions(+), 51 deletions(-)
create mode 100644 config/common_arm64
diff --git a/config/common_arm64 b/config/common_arm64
new file mode 100644
index 0000000..5e5e303
--- /dev/null
+++ b/config/common_arm64
@@ -0,0 +1,48 @@
+# BSD LICENSE
+#
+# Copyright (C) Cavium networks 2015. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Cavium networks nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+
+CONFIG_RTE_ARCH="arm64"
+CONFIG_RTE_ARCH_ARM64=y
+CONFIG_RTE_ARCH_64=y
+CONFIG_RTE_ARCH_ARM_NEON=y
+
+CONFIG_RTE_FORCE_INTRINSICS=y
+
+CONFIG_RTE_IXGBE_INC_VECTOR=n
+CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
+CONFIG_RTE_LIBRTE_IVSHMEM=n
+CONFIG_RTE_LIBRTE_FM10K_PMD=n
+CONFIG_RTE_LIBRTE_I40E_PMD=n
+
+CONFIG_RTE_LIBRTE_LPM=n
+CONFIG_RTE_LIBRTE_TABLE=n
+CONFIG_RTE_LIBRTE_PIPELINE=n
diff --git a/config/defconfig_arm64-armv8a-linuxapp-gcc b/config/defconfig_arm64-armv8a-linuxapp-gcc
index 49e7056..39e36b8 100644
--- a/config/defconfig_arm64-armv8a-linuxapp-gcc
+++ b/config/defconfig_arm64-armv8a-linuxapp-gcc
@@ -30,27 +30,11 @@
#
#include "common_linuxapp"
+#include "common_arm64"
CONFIG_RTE_MACHINE="armv8a"
-CONFIG_RTE_ARCH="arm64"
-CONFIG_RTE_ARCH_ARM64=y
-CONFIG_RTE_ARCH_64=y
-CONFIG_RTE_ARCH_ARM_NEON=y
-
-CONFIG_RTE_FORCE_INTRINSICS=y
-
CONFIG_RTE_TOOLCHAIN="gcc"
CONFIG_RTE_TOOLCHAIN_GCC=y
CONFIG_RTE_CACHE_LINE_SIZE=64
-
-CONFIG_RTE_IXGBE_INC_VECTOR=n
-CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
-CONFIG_RTE_LIBRTE_IVSHMEM=n
-CONFIG_RTE_LIBRTE_FM10K_PMD=n
-CONFIG_RTE_LIBRTE_I40E_PMD=n
-
-CONFIG_RTE_LIBRTE_LPM=n
-CONFIG_RTE_LIBRTE_TABLE=n
-CONFIG_RTE_LIBRTE_PIPELINE=n
diff --git a/config/defconfig_arm64-thunderx-linuxapp-gcc b/config/defconfig_arm64-thunderx-linuxapp-gcc
index 6b2048b..d63d9b8 100644
--- a/config/defconfig_arm64-thunderx-linuxapp-gcc
+++ b/config/defconfig_arm64-thunderx-linuxapp-gcc
@@ -30,27 +30,11 @@
#
#include "common_linuxapp"
+#include "common_arm64"
CONFIG_RTE_MACHINE="thunderx"
-CONFIG_RTE_ARCH="arm64"
-CONFIG_RTE_ARCH_ARM64=y
-CONFIG_RTE_ARCH_64=y
-CONFIG_RTE_ARCH_ARM_NEON=y
-
-CONFIG_RTE_FORCE_INTRINSICS=y
-
CONFIG_RTE_TOOLCHAIN="gcc"
CONFIG_RTE_TOOLCHAIN_GCC=y
CONFIG_RTE_CACHE_LINE_SIZE=128
-
-CONFIG_RTE_IXGBE_INC_VECTOR=n
-CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
-CONFIG_RTE_LIBRTE_IVSHMEM=n
-CONFIG_RTE_LIBRTE_FM10K_PMD=n
-CONFIG_RTE_LIBRTE_I40E_PMD=n
-
-CONFIG_RTE_LIBRTE_LPM=n
-CONFIG_RTE_LIBRTE_TABLE=n
-CONFIG_RTE_LIBRTE_PIPELINE=n
diff --git a/config/defconfig_arm64-xgene1-linuxapp-gcc b/config/defconfig_arm64-xgene1-linuxapp-gcc
index d75f8f0..0759721 100644
--- a/config/defconfig_arm64-xgene1-linuxapp-gcc
+++ b/config/defconfig_arm64-xgene1-linuxapp-gcc
@@ -30,27 +30,11 @@
#
#include "common_linuxapp"
+#include "common_arm64"
CONFIG_RTE_MACHINE="xgene1"
-CONFIG_RTE_ARCH="arm64"
-CONFIG_RTE_ARCH_ARM64=y
-CONFIG_RTE_ARCH_64=y
-CONFIG_RTE_ARCH_ARM_NEON=y
-
-CONFIG_RTE_FORCE_INTRINSICS=y
-
CONFIG_RTE_TOOLCHAIN="gcc"
CONFIG_RTE_TOOLCHAIN_GCC=y
CONFIG_RTE_CACHE_LINE_SIZE=64
-
-CONFIG_RTE_IXGBE_INC_VECTOR=n
-CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
-CONFIG_RTE_LIBRTE_IVSHMEM=n
-CONFIG_RTE_LIBRTE_FM10K_PMD=n
-CONFIG_RTE_LIBRTE_I40E_PMD=n
-
-CONFIG_RTE_LIBRTE_LPM=n
-CONFIG_RTE_LIBRTE_TABLE=n
-CONFIG_RTE_LIBRTE_PIPELINE=n
--
2.1.0
next prev parent reply other threads:[~2015-11-27 13:35 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-27 13:34 [dpdk-dev] [PATCH v3 0/2] disable CONFIG_RTE_SCHED_VECTOR for arm Jerin Jacob
2015-11-27 13:34 ` Jerin Jacob [this message]
2015-11-27 13:34 ` [dpdk-dev] [PATCH v3 2/2] config: " Jerin Jacob
2015-11-27 14:36 ` Jan Viktorin
2015-11-29 23:48 ` Jianbo Liu
2015-11-30 5:47 ` Jerin Jacob
2015-11-30 17:03 ` Jianbo Liu
2015-11-30 10:22 ` Jerin Jacob
2015-11-30 18:55 ` Jianbo Liu
2015-11-30 13:27 ` Jan Viktorin
2015-11-30 13:59 ` Thomas Monjalon
2015-11-30 14:04 ` Jan Viktorin
2015-11-30 14:13 ` Thomas Monjalon
2015-11-27 14:40 ` [dpdk-dev] [PATCH v3 0/2] " Jan Viktorin
2015-11-27 14:49 ` Thomas Monjalon
2015-11-30 16:37 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1448631268-10692-2-git-send-email-jerin.jacob@caviumnetworks.com \
--to=jerin.jacob@caviumnetworks.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).