From: "Chen Jing D(Mark)" <jing.d.chen@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2] doc: add fm10k driver
Date: Thu, 10 Dec 2015 15:00:21 +0800 [thread overview]
Message-ID: <1449730821-26363-1-git-send-email-jing.d.chen@intel.com> (raw)
In-Reply-To: <1449649486-22505-1-git-send-email-jing.d.chen@intel.com>
From: "Chen Jing D(Mark)" <jing.d.chen@intel.com>
This documentation covers introdutions and limitations on Intel
FM10000 series products.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
---
v2 changes:
- sync with latest repo.
- Fix some format and syntax issues.
- Add descriptions on Testpoint.
doc/guides/nics/fm10k.rst | 67 +++++++++++++++++++++++++++++++++++++++++++++
doc/guides/nics/index.rst | 1 +
2 files changed, 68 insertions(+), 0 deletions(-)
create mode 100644 doc/guides/nics/fm10k.rst
diff --git a/doc/guides/nics/fm10k.rst b/doc/guides/nics/fm10k.rst
new file mode 100644
index 0000000..4206b7f
--- /dev/null
+++ b/doc/guides/nics/fm10k.rst
@@ -0,0 +1,67 @@
+.. BSD LICENSE
+ Copyright(c) 2015 Intel Corporation. All rights reserved.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+FM10K Poll Mode Driver
+======================
+
+The FM10K poll mode driver library provides support for the Intel FM10000
+(FM10K) family of 40GbE/100GbE adapters.
+
+
+Limitations
+-----------
+
+
+Switch manager
+~~~~~~~~~~~~~~
+
+The Intel FM10000 family of NICs integrate a hardware switch and multiple host
+interfaces. The FM10000 PMD driver only manages host interfaces. For the
+switch component another switch driver has to be loaded prior to to the
+FM10000 PMD driver. The switch driver can be acquired for Intel support or
+from the `Match Interface <https://github.com/match-interface>`_ project.
+Only Testpoint is validated with DPDK, the latest version that has been
+validated with DPDK2.2 is 4.1.6.
+
+CRC striping
+~~~~~~~~~~~~
+
+The FM10000 family of NICs strip the CRC for every packets coming into the
+host interface. So, CRC will be stripped even when the
+``rxmode.hw_strip_crc`` member is set to 0 in ``struct rte_eth_conf``.
+
+
+Maximum packet length
+~~~~~~~~~~~~~~~~~~~~~
+
+The FM10000 family of NICS support a maximum of a 15K jumbo frame. The value
+is fixed and cannot be changed. So, even when the ``rxmode.max_rx_pkt_len``
+member of ``struct rte_eth_conf`` is set to a value lower than 15364, frames
+up to 15364 bytes can still reach the host interface.
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 7bf2938..4f2cc6c 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -51,6 +51,7 @@ Network Interface Controller Drivers
virtio
vmxnet3
pcap_ring
+ fm10k
**Figures**
--
1.7.7.6
next prev parent reply other threads:[~2015-12-10 7:00 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-09 8:24 [dpdk-dev] [PATCH] " Chen Jing D(Mark)
2015-12-09 14:20 ` Mcnamara, John
2015-12-10 6:36 ` Chen, Jing D
2015-12-10 7:00 ` Chen Jing D(Mark) [this message]
2015-12-10 10:21 ` [dpdk-dev] [PATCH v2] " Mcnamara, John
2015-12-13 23:40 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449730821-26363-1-git-send-email-jing.d.chen@intel.com \
--to=jing.d.chen@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).