[dpdk-dev] [PATCH] ip_pipeline: add sample configuration/script files

DPDK patches and discussions
 help / color / mirror / Atom feed

* [dpdk-dev] [PATCH] ip_pipeline: add sample configuration/script files
@ 2015-12-10 21:28 Jasvinder Singh
  2015-12-14 12:12 ` [dpdk-dev] [PATCH v2] " Jasvinder Singh
  0 siblings, 1 reply; 6+ messages in thread
From: Jasvinder Singh @ 2015-12-10 21:28 UTC (permalink / raw)
  To: dev

This patch includes the configuration and script
files of the some applications which can
be built using DPDK Packet Framework. A
configuration file defines the application
structure which include packet processing stages
(knowns as pipelines), their connectivity and
other parameters necessary to start and run the
application. A script file specifies CLI commands
required for loading table entries (rules/routes,
etc). The configuration/script files for simple
applications such as l2 forwarding, l3 forwarding
have been presented. In addition, to demonstrate
the use and inter-connectivity of various pipeline
modules (which are avilable in packet framework),
a complex packet processing workload i.e. vPE
(Virtual Provider Edge)router is considered. The
configuration of the pipeline stages used for
upstream and downstream flow processing has been
specified separately in two configuration files.

Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
---
 .../ip_pipeline/config/edge_router_downstream.cfg  |  80 ++++++++++++++++
 .../ip_pipeline/config/edge_router_downstream.cli  |  10 ++
 .../ip_pipeline/config/edge_router_upstream.cfg    | 106 +++++++++++++++++++++
 .../ip_pipeline/config/edge_router_upstream.cli    |  38 ++++++++
 examples/ip_pipeline/config/l2fwd.cfg              |  55 +++++++++++
 examples/ip_pipeline/config/l3fwd.cfg              |  63 ++++++++++++
 examples/ip_pipeline/config/l3fwd.cli              |   9 ++
 7 files changed, 361 insertions(+)
 create mode 100644 examples/ip_pipeline/config/edge_router_downstream.cfg
 create mode 100644 examples/ip_pipeline/config/edge_router_downstream.cli
 create mode 100644 examples/ip_pipeline/config/edge_router_upstream.cfg
 create mode 100644 examples/ip_pipeline/config/edge_router_upstream.cli
 create mode 100644 examples/ip_pipeline/config/l2fwd.cfg
 create mode 100644 examples/ip_pipeline/config/l3fwd.cfg
 create mode 100644 examples/ip_pipeline/config/l3fwd.cli

diff --git a/examples/ip_pipeline/config/edge_router_downstream.cfg b/examples/ip_pipeline/config/edge_router_downstream.cfg
new file mode 100644
index 0000000..6b3370c
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_downstream.cfg
@@ -0,0 +1,80 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+; A simple configuration of the vPE(Virtual Provider Edge) downstream
+: pipeline is presented below. The functional components of the downstream
+; pipeline consists of: Packet RX & Routing, Traffic management and Packet
+; TX. The input packets are IPv4, the output packets are QinQ IPv4.
+
+;               Packet Rx &               Traffic Management              Packet Tx
+;                Routing                   (Pass-Through)               (Pass-Through)
+;             ________________    SWQ0    _________________    SWQ4    _________________
+; RXQ0.0 --->|                |--------->|-----> TM0 ----> |--------->|.................|-------> TXQ0.0
+;            |                |   SWQ1   |                 |   SWQ5   |                 |
+; RXQ1.0 --->|                |--------->|-----> TM1 ----> |--------->|.................|-------> TXQ1.0
+;            |     (P1)       |   SWQ2   |      (P2)       |   SWQ6   |      (P3)       |
+; RXQ2.0 --->|                |--------->|-----> TM2 ----> |--------->|.................|-------> TXQ2.0
+;            |                |   SWQ3   |                 |   SWQ7   |                 |
+; RXQ3.0 --->|                |--------->|-----> TM3 ----> |--------->|.................|-------> TXQ3.0
+;            |________________|          |_________________|          |_________________|
+;                    |
+;                    +--> SINK0	(route miss)
+;
+
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = SWQ0 SWQ1 SWQ2 SWQ3 SINK0
+encap = ethernet_qinq
+qinq_sched = test
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+
+[PIPELINE2]
+type = PASS-THROUGH
+core = 2
+pktq_in = SWQ0 SWQ1 SWQ2 SWQ3 TM0 TM1 TM2 TM3
+pktq_out = TM0 TM1 TM2 TM3 SWQ4 SWQ5 SWQ6 SWQ7
+
+[PIPELINE3]
+type = PASS-THROUGH
+core = 3
+pktq_in = SWQ4 SWQ5 SWQ6 SWQ7
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
+
+[MEMPOOL0]
+pool_size = 2M
diff --git a/examples/ip_pipeline/config/edge_router_downstream.cli b/examples/ip_pipeline/config/edge_router_downstream.cli
new file mode 100644
index 0000000..ce46beb
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_downstream.cli
@@ -0,0 +1,10 @@
+################################################################################
+# Routing: Ether QinQ, ARP off
+################################################################################
+p 1 route add default 4 #SINK0
+p 1 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0 qinq 256 257
+p 1 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1 qinq 258 259
+p 1 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2 qinq 260 261
+p 1 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3 qinq 262 263
+
+p 1 route ls
diff --git a/examples/ip_pipeline/config/edge_router_upstream.cfg b/examples/ip_pipeline/config/edge_router_upstream.cfg
new file mode 100644
index 0000000..5cafd3b
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_upstream.cfg
@@ -0,0 +1,106 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+; A simple configuration of the vPE(Virtual Provider Edge) upstream pipeline
+; is presented below. The functional components of the upstream pipeline
+; consists of: Firewall, Pass-through, Flow-Classification, Flow-Actions
+; and Routing.The input packets are ; QinQ IPv4, the output packets are
+; MPLS IPv4.
+
+;
+:              Firewall         Pass-Through    Flow-Classification   Flow-Actions         Routing
+;             __________  SWQ0   __________  SWQ4   __________  SWQ8   __________  SWQ12  __________
+; RXQ0.0 --->|          |------>|..........|------>|          |------>|          |------>|          |------> TXQ0.0
+;            |          | SWQ1  |          | SWQ5  |          | SWQ9  |          | SWQ13 |          |
+; RXQ1.0 --->|          |------>|..........|------>|          |------>|          |------>|          |------> TXQ1.0
+;            |   (P1)   | SWQ2  |  (P2)    | SWQ6  |   (P3)   | SWQ10 |   (P4)   | SWQ14 |   (P5)   |
+; RXQ2.0 --->|          |------>|..........|------>|          |------>|          |------>|          |------> TXQ2.0
+;            |          | SWQ3  |          | SWQ7  |          | SWQ11 |          | SWQ15 |          |
+; RXQ3.0 --->|          |------>|..........|------>|          |------>|          |------>|          |------> TXQ3.0
+;            |__________|       |__________|       |__________|       |__________|       |__________|
+;                 |                                     |                                     |
+;                 +--> SINK0 (Default)                  +--> SINK1 (Default)                  +--> SINK2 (Route Miss)
+
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = FIREWALL
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = SWQ0 SWQ1 SWQ2 SWQ3 SINK0
+n_rules = 4096
+pkt_type = qinq_ipv4
+
+[PIPELINE2]
+type = PASS-THROUGH
+core = 2
+pktq_in = SWQ0 SWQ1 SWQ2 SWQ3
+pktq_out = SWQ4 SWQ5 SWQ6 SWQ7
+dma_size = 8
+dma_dst_offset = 128; mbuf (128)
+dma_src_offset = 268; mbuf (128) + headroom (128) + 1st ethertype offset (12) = 268
+dma_src_mask = 00000FFF00000FFF; qinq
+dma_hash_offset = 136; dma_dst_offset + dma_size = 136
+
+[PIPELINE3]
+type = FLOW_CLASSIFICATION
+core = 2
+pktq_in = SWQ4 SWQ5 SWQ6 SWQ7
+pktq_out = SWQ8 SWQ9 SWQ10 SWQ11 SINK1
+n_flows = 65536
+key_size = 8; dma_size
+key_offset = 128; dma_dst_offset
+hash_offset = 136; dma_hash_offset
+flowid_offset = 192; mbuf (128) + 64
+
+[PIPELINE4]
+type = FLOW_ACTIONS
+core = 3
+pktq_in = SWQ8 SWQ9 SWQ10 SWQ11
+pktq_out = SWQ12 SWQ13 SWQ14 SWQ15
+n_flows = 65536
+n_meters_per_flow = 1
+flow_id_offset = 192; flowid_offset
+ip_hdr_offset = 278; mbuf (128) + headroom (128) + ethernet (14) + qinq (8) = 278
+color_offset = 196; flowid_offset + sizeof(flow_id)
+
+[PIPELINE5]
+type = ROUTING
+core = 4
+pktq_in = SWQ12 SWQ13 SWQ14 SWQ15
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 SINK2
+encap = ethernet_mpls
+mpls_color_mark = yes
+ip_hdr_offset = 278; mbuf (128) + headroom (128) + ethernet (14) + qinq (8) = 278
+color_offset = 196; flowid_offset + sizeof(flow_id)
diff --git a/examples/ip_pipeline/config/edge_router_upstream.cli b/examples/ip_pipeline/config/edge_router_upstream.cli
new file mode 100644
index 0000000..eeba600
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_upstream.cli
@@ -0,0 +1,38 @@
+################################################
+# Firewall Rules:4 for 4 ports
+################################################
+p 1 firewall add ipv4 1 0.0.0.0 8 0.0.0.0 10 0 0 0 0 6 1 0
+p 1 firewall add ipv4 1 0.0.0.0 8 0.64.0.0 10 0 0 0 0 6 1 1
+p 1 firewall add ipv4 1 0.0.0.0 8 0.128.0.0 10 0 0 0 0 6 1 2
+p 1 firewall add ipv4 1 0.0.0.0 8 0.192.0.0 10 0 0 0 0 6 1 3
+p 1 firewall add default 4 #SINK0
+
+
+################################################################################
+# Flow classification
+################################################################################
+p 3 flow add default 4 #SINK1
+p 3 flow add qinq all 65536 4
+
+################################################################################
+# Flow Actions - Metering
+################################################################################
+p 4 flows 65536 meter 0 trtcm 1250000000 1250000000 100000000 100000000
+p 4 flows 65536 ports 4
+
+################################################################################
+# Routing: Ether MPLS, ARP off
+################################################################################
+p 5 route add default 4 #SINK2
+p 5 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0 mpls 0:1
+p 5 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1 mpls 10:11
+p 5 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2 mpls 20:21
+p 5 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3 mpls 30:31
+
+################################################################################
+# List all configurations
+################################################################################
+p 1 firewall ls
+#p 3 flow ls
+#p 4 flow actions ls
+p 5 route ls
diff --git a/examples/ip_pipeline/config/l2fwd.cfg b/examples/ip_pipeline/config/l2fwd.cfg
new file mode 100644
index 0000000..181f686
--- /dev/null
+++ b/examples/ip_pipeline/config/l2fwd.cfg
@@ -0,0 +1,55 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+;
+; The pass-through pipeline below connects the input ports to the output ports
+; as follows: RXQ0.0 -> TXQ1.0, RXQ1.0 -> TXQ0.0, RXQ2.0 -> TXQ3.0 and
+; RXQ3.0 -> TXQ2.0.
+;             ________________
+; RXQ0.0 --->|................|---> TXQ1.0
+;            |                |
+; RXQ1.0 --->|................|---> TXQ0.0
+;            |  Pass-through  |
+; RXQ2.0 --->|................|---> TXQ3.0
+;            |                |
+; RXQ3.0 --->|................|---> TXQ2.0
+;            |________________|
+;
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = TXQ1.0 TXQ0.0 TXQ3.0 TXQ2.0
diff --git a/examples/ip_pipeline/config/l3fwd.cfg b/examples/ip_pipeline/config/l3fwd.cfg
new file mode 100644
index 0000000..8c49fdf
--- /dev/null
+++ b/examples/ip_pipeline/config/l3fwd.cfg
@@ -0,0 +1,63 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+;             _______________
+; RXQ0.0 --->|               |---> TXQ0.0
+;            |               |
+; RXQ1.0 --->|               |---> TXQ1.0
+;            |    Routing    |
+; RXQ2.0 --->|               |---> TXQ2.0
+;            |               |
+; RXQ3.0 --->|               |---> TXQ3.0
+;            |_______________|
+;                    |
+;                    +-----------> SINK0 (route miss)
+;
+; Input packet: Ethernet/IPv4
+;
+; Packet buffer layout:
+; #	Field Name		Offset (Bytes)	Size (Bytes)
+; 0	Mbuf			0 		128
+; 1	Headroom		128 		128
+; 2	Ethernet header		256 		14
+; 3	IPv4 header		270 		20
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 SINK0
+encap = ethernet; encap = ethernet / ethernet_qinq / ethernet_mpls
+ip_hdr_offset = 270
diff --git a/examples/ip_pipeline/config/l3fwd.cli b/examples/ip_pipeline/config/l3fwd.cli
new file mode 100644
index 0000000..2774010
--- /dev/null
+++ b/examples/ip_pipeline/config/l3fwd.cli
@@ -0,0 +1,9 @@
+################################################################################
+# Routing: encap = ethernet, arp = off
+################################################################################
+p 1 route add default 4 #SINK0
+p 1 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0
+p 1 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1
+p 1 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2
+p 1 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3
+p 1 route ls
-- 
2.5.0

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [dpdk-dev] [PATCH v2] ip_pipeline: add sample configuration/script files
  2015-12-10 21:28 [dpdk-dev] [PATCH] ip_pipeline: add sample configuration/script files Jasvinder Singh
@ 2015-12-14 12:12 ` Jasvinder Singh
  2015-12-14 12:48   ` [dpdk-dev] [PATCH v3] " Jasvinder Singh
  0 siblings, 1 reply; 6+ messages in thread
From: Jasvinder Singh @ 2015-12-14 12:12 UTC (permalink / raw)
  To: dev

This patch includes the configuration and script
files of the some applications which can
be built using DPDK Packet Framework. A
configuration file defines the application
structure which include packet processing stages
(knowns as pipelines), their connectivity and
other parameters necessary to start and run the
application. A script file specifies CLI commands
required for loading table entries (rules/routes,
etc). The configuration/script files for simple
applications such as l2 forwarding, l3 forwarding
have been presented. In addition, to demonstrate
the use and inter-connectivity of various pipeline
modules (which are avilable in packet framework),
a complex packet processing workload i.e. edge
router is considered. The configuration of the
pipeline stages used for upstream and downstream
flow processing has been specified separately in
two configuration files. All these configuration
and script files don't affect the compilation.


Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
---
*v2
- correct date in license header
- modify commit message

 .../ip_pipeline/config/edge_router_downstream.cfg  |  85 ++++++++++++++++
 .../ip_pipeline/config/edge_router_downstream.sh   |  10 ++
 .../ip_pipeline/config/edge_router_upstream.cfg    | 110 +++++++++++++++++++++
 .../ip_pipeline/config/edge_router_upstream.sh     |  38 +++++++
 examples/ip_pipeline/config/l2fwd.cfg              |  55 +++++++++++
 examples/ip_pipeline/config/l3fwd.cfg              |  63 ++++++++++++
 examples/ip_pipeline/config/l3fwd.sh               |   9 ++
 7 files changed, 370 insertions(+)
 create mode 100644 examples/ip_pipeline/config/edge_router_downstream.cfg
 create mode 100644 examples/ip_pipeline/config/edge_router_downstream.sh
 create mode 100644 examples/ip_pipeline/config/edge_router_upstream.cfg
 create mode 100644 examples/ip_pipeline/config/edge_router_upstream.sh
 create mode 100644 examples/ip_pipeline/config/l2fwd.cfg
 create mode 100644 examples/ip_pipeline/config/l3fwd.cfg
 create mode 100644 examples/ip_pipeline/config/l3fwd.sh

diff --git a/examples/ip_pipeline/config/edge_router_downstream.cfg b/examples/ip_pipeline/config/edge_router_downstream.cfg
new file mode 100644
index 0000000..85bbab8
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_downstream.cfg
@@ -0,0 +1,85 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+;   An edge router typically sits between two networks such as the provider
+;   core network and the provider access network. A typical packet processing
+;   pipeline for the downstream traffic (i.e. traffic from core to access
+;   network) contains the following functional blocks: Packet RX & Routing,
+;   Traffic management and Packet TX. The input packets are assumed to be
+;   IPv4, while the output packets are Q-in-Q IPv4.
+
+;  A simple implementation for this functional pipeline is presented below.
+
+;                  Packet Rx &                Traffic Management               Packet Tx
+;                   Routing                    (Pass-Through)                (Pass-Through)
+;             _____________________  SWQ0  ______________________  SWQ4  _____________________
+; RXQ0.0 --->|                     |----->|                      |----->|                     |---> TXQ0.0
+;            |                     | SWQ1 |                      | SWQ5 |                     |
+; RXQ1.0 --->|                     |----->|                      |----->|                     |---> TXQ1.0
+;            |        (P1)         | SWQ2 |         (P2)         | SWQ6 |        (P3)         |
+; RXQ2.0 --->|                     |----->|                      |----->|                     |---> TXQ2.0
+;            |                     | SWQ3 |                      | SWQ7 |                     |
+; RXQ3.0 --->|                     |----->|                      |----->|                     |---> TXQ3.0
+;            |_____________________|      |______________________|      |_____________________|
+;                       |                 _|_ ^ _|_ ^ _|_ ^ _|_ ^
+;                       |                |___|||___|||___|||___||
+;                       +--> SINK0       |___|||___|||___|||___||
+;                      (route miss)        |__|  |__|  |__|  |__|
+;                                          TM0   TM1   TM2   TM3
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = SWQ0 SWQ1 SWQ2 SWQ3 SINK0
+encap = ethernet_qinq
+qinq_sched = test
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+
+[PIPELINE2]
+type = PASS-THROUGH
+core = 2
+pktq_in = SWQ0 SWQ1 SWQ2 SWQ3 TM0 TM1 TM2 TM3
+pktq_out = TM0 TM1 TM2 TM3 SWQ4 SWQ5 SWQ6 SWQ7
+
+[PIPELINE3]
+type = PASS-THROUGH
+core = 3
+pktq_in = SWQ4 SWQ5 SWQ6 SWQ7
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
+
+[MEMPOOL0]
+pool_size = 2M
diff --git a/examples/ip_pipeline/config/edge_router_downstream.sh b/examples/ip_pipeline/config/edge_router_downstream.sh
new file mode 100644
index 0000000..ce46beb
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_downstream.sh
@@ -0,0 +1,10 @@
+################################################################################
+# Routing: Ether QinQ, ARP off
+################################################################################
+p 1 route add default 4 #SINK0
+p 1 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0 qinq 256 257
+p 1 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1 qinq 258 259
+p 1 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2 qinq 260 261
+p 1 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3 qinq 262 263
+
+p 1 route ls
diff --git a/examples/ip_pipeline/config/edge_router_upstream.cfg b/examples/ip_pipeline/config/edge_router_upstream.cfg
new file mode 100644
index 0000000..a08c5cc
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_upstream.cfg
@@ -0,0 +1,110 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+;   An edge router typically sits between two networks such as the provider
+;   core network and the provider access network. A typical packet processing
+;   pipeline for the upstream traffic (i.e. traffic from access to core
+;   network) contains the following functional blocks: Packet RX & Firewall,
+;   Flow classification, Metering, Routing and Packet TX. The input packets
+;   are assumed to be Q-in-Q IPv4, while the output packets are MPLS IPv4
+;  (with variable number of labels per route).
+
+;   A simple implementation for this functional pipeline is presented below.
+
+;             Packet Rx &       Pass-Through    Flow-Classification   Flow-Actions         Routing
+:              Firewall
+;             __________  SWQ0   __________  SWQ4   __________  SWQ8   __________  SWQ12  __________
+; RXQ0.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ0.0
+;            |          | SWQ1  |          | SWQ5  |          | SWQ9  |          | SWQ13 |          |
+; RXQ1.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ1.0
+;            |   (P1)   | SWQ2  |  (P2)    | SWQ6  |   (P3)   | SWQ10 |   (P4)   | SWQ14 |   (P5)   |
+; RXQ2.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ2.0
+;            |          | SWQ3  |          | SWQ7  |          | SWQ11 |          | SWQ15 |          |
+; RXQ3.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ3.0
+;            |__________|       |__________|       |__________|       |__________|       |__________|
+;                 |                                     |                                     |
+;                 +--> SINK0 (Default)                  +--> SINK1 (Default)                  +--> SINK2 (Route Miss)
+
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = FIREWALL
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = SWQ0 SWQ1 SWQ2 SWQ3 SINK0
+n_rules = 4096
+pkt_type = qinq_ipv4
+
+[PIPELINE2]
+type = PASS-THROUGH
+core = 2
+pktq_in = SWQ0 SWQ1 SWQ2 SWQ3
+pktq_out = SWQ4 SWQ5 SWQ6 SWQ7
+dma_size = 8
+dma_dst_offset = 128; mbuf (128)
+dma_src_offset = 268; mbuf (128) + headroom (128) + 1st ethertype offset (12) = 268
+dma_src_mask = 00000FFF00000FFF; qinq
+dma_hash_offset = 136; dma_dst_offset + dma_size = 136
+
+[PIPELINE3]
+type = FLOW_CLASSIFICATION
+core = 2
+pktq_in = SWQ4 SWQ5 SWQ6 SWQ7
+pktq_out = SWQ8 SWQ9 SWQ10 SWQ11 SINK1
+n_flows = 65536
+key_size = 8; dma_size
+key_offset = 128; dma_dst_offset
+hash_offset = 136; dma_hash_offset
+flowid_offset = 192; mbuf (128) + 64
+
+[PIPELINE4]
+type = FLOW_ACTIONS
+core = 3
+pktq_in = SWQ8 SWQ9 SWQ10 SWQ11
+pktq_out = SWQ12 SWQ13 SWQ14 SWQ15
+n_flows = 65536
+n_meters_per_flow = 1
+flow_id_offset = 192; flowid_offset
+ip_hdr_offset = 278; mbuf (128) + headroom (128) + ethernet (14) + qinq (8) = 278
+color_offset = 196; flowid_offset + sizeof(flow_id)
+
+[PIPELINE5]
+type = ROUTING
+core = 4
+pktq_in = SWQ12 SWQ13 SWQ14 SWQ15
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 SINK2
+encap = ethernet_mpls
+mpls_color_mark = yes
+ip_hdr_offset = 278; mbuf (128) + headroom (128) + ethernet (14) + qinq (8) = 278
+color_offset = 196; flowid_offset + sizeof(flow_id)
diff --git a/examples/ip_pipeline/config/edge_router_upstream.sh b/examples/ip_pipeline/config/edge_router_upstream.sh
new file mode 100644
index 0000000..eeba600
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_upstream.sh
@@ -0,0 +1,38 @@
+################################################
+# Firewall Rules:4 for 4 ports
+################################################
+p 1 firewall add ipv4 1 0.0.0.0 8 0.0.0.0 10 0 0 0 0 6 1 0
+p 1 firewall add ipv4 1 0.0.0.0 8 0.64.0.0 10 0 0 0 0 6 1 1
+p 1 firewall add ipv4 1 0.0.0.0 8 0.128.0.0 10 0 0 0 0 6 1 2
+p 1 firewall add ipv4 1 0.0.0.0 8 0.192.0.0 10 0 0 0 0 6 1 3
+p 1 firewall add default 4 #SINK0
+
+
+################################################################################
+# Flow classification
+################################################################################
+p 3 flow add default 4 #SINK1
+p 3 flow add qinq all 65536 4
+
+################################################################################
+# Flow Actions - Metering
+################################################################################
+p 4 flows 65536 meter 0 trtcm 1250000000 1250000000 100000000 100000000
+p 4 flows 65536 ports 4
+
+################################################################################
+# Routing: Ether MPLS, ARP off
+################################################################################
+p 5 route add default 4 #SINK2
+p 5 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0 mpls 0:1
+p 5 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1 mpls 10:11
+p 5 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2 mpls 20:21
+p 5 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3 mpls 30:31
+
+################################################################################
+# List all configurations
+################################################################################
+p 1 firewall ls
+#p 3 flow ls
+#p 4 flow actions ls
+p 5 route ls
diff --git a/examples/ip_pipeline/config/l2fwd.cfg b/examples/ip_pipeline/config/l2fwd.cfg
new file mode 100644
index 0000000..181f686
--- /dev/null
+++ b/examples/ip_pipeline/config/l2fwd.cfg
@@ -0,0 +1,55 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+;
+; The pass-through pipeline below connects the input ports to the output ports
+; as follows: RXQ0.0 -> TXQ1.0, RXQ1.0 -> TXQ0.0, RXQ2.0 -> TXQ3.0 and
+; RXQ3.0 -> TXQ2.0.
+;             ________________
+; RXQ0.0 --->|................|---> TXQ1.0
+;            |                |
+; RXQ1.0 --->|................|---> TXQ0.0
+;            |  Pass-through  |
+; RXQ2.0 --->|................|---> TXQ3.0
+;            |                |
+; RXQ3.0 --->|................|---> TXQ2.0
+;            |________________|
+;
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = TXQ1.0 TXQ0.0 TXQ3.0 TXQ2.0
diff --git a/examples/ip_pipeline/config/l3fwd.cfg b/examples/ip_pipeline/config/l3fwd.cfg
new file mode 100644
index 0000000..8c49fdf
--- /dev/null
+++ b/examples/ip_pipeline/config/l3fwd.cfg
@@ -0,0 +1,63 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+;             _______________
+; RXQ0.0 --->|               |---> TXQ0.0
+;            |               |
+; RXQ1.0 --->|               |---> TXQ1.0
+;            |    Routing    |
+; RXQ2.0 --->|               |---> TXQ2.0
+;            |               |
+; RXQ3.0 --->|               |---> TXQ3.0
+;            |_______________|
+;                    |
+;                    +-----------> SINK0 (route miss)
+;
+; Input packet: Ethernet/IPv4
+;
+; Packet buffer layout:
+; #	Field Name		Offset (Bytes)	Size (Bytes)
+; 0	Mbuf			0 		128
+; 1	Headroom		128 		128
+; 2	Ethernet header		256 		14
+; 3	IPv4 header		270 		20
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 SINK0
+encap = ethernet; encap = ethernet / ethernet_qinq / ethernet_mpls
+ip_hdr_offset = 270
diff --git a/examples/ip_pipeline/config/l3fwd.sh b/examples/ip_pipeline/config/l3fwd.sh
new file mode 100644
index 0000000..2774010
--- /dev/null
+++ b/examples/ip_pipeline/config/l3fwd.sh
@@ -0,0 +1,9 @@
+################################################################################
+# Routing: encap = ethernet, arp = off
+################################################################################
+p 1 route add default 4 #SINK0
+p 1 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0
+p 1 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1
+p 1 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2
+p 1 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3
+p 1 route ls
-- 
2.5.0

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [dpdk-dev] [PATCH v3] ip_pipeline: add sample configuration/script files
  2015-12-14 12:12 ` [dpdk-dev] [PATCH v2] " Jasvinder Singh
@ 2015-12-14 12:48   ` Jasvinder Singh
  2015-12-14 13:28     ` Thomas Monjalon
  2015-12-14 14:20     ` [dpdk-dev] [PATCH v4] " Jasvinder Singh
  0 siblings, 2 replies; 6+ messages in thread
From: Jasvinder Singh @ 2015-12-14 12:48 UTC (permalink / raw)
  To: dev

This patch includes the configuration and script
files of the some applications which can
be built using DPDK Packet Framework. A
configuration file defines the application
structure which include packet processing stages
(knowns as pipelines), their connectivity and
other parameters necessary to start and run the
application. A script file specifies CLI commands
required for loading table entries (rules/routes,
etc). The configuration/script files for simple
applications such as l2 forwarding, l3 forwarding
have been presented. In addition, to demonstrate
the use and inter-connectivity of various pipeline
modules (which are avilable in packet framework),
a complex packet processing workload i.e. edge
router is considered. The configuration of the
pipeline stages used for upstream and downstream
flow processing has been specified separately in
two configuration files. All these configuration
and script files don't affect the compilation.

Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
---
*v2
- correct date in license header(edge_router_downstream/upstream.cfg)
- modify commit message

*v3
- correct date in license header(l2fwd.cfg, l3fwd.cfg)

 .../ip_pipeline/config/edge_router_downstream.cfg  |  85 ++++++++++++++++
 .../ip_pipeline/config/edge_router_downstream.sh   |  10 ++
 .../ip_pipeline/config/edge_router_upstream.cfg    | 110 +++++++++++++++++++++
 .../ip_pipeline/config/edge_router_upstream.sh     |  38 +++++++
 examples/ip_pipeline/config/l2fwd.cfg              |  55 +++++++++++
 examples/ip_pipeline/config/l3fwd.cfg              |  63 ++++++++++++
 examples/ip_pipeline/config/l3fwd.sh               |   9 ++
 7 files changed, 370 insertions(+)
 create mode 100755 examples/ip_pipeline/config/edge_router_downstream.cfg
 create mode 100755 examples/ip_pipeline/config/edge_router_downstream.sh
 create mode 100755 examples/ip_pipeline/config/edge_router_upstream.cfg
 create mode 100755 examples/ip_pipeline/config/edge_router_upstream.sh
 create mode 100755 examples/ip_pipeline/config/l2fwd.cfg
 create mode 100755 examples/ip_pipeline/config/l3fwd.cfg
 create mode 100755 examples/ip_pipeline/config/l3fwd.sh

diff --git a/examples/ip_pipeline/config/edge_router_downstream.cfg b/examples/ip_pipeline/config/edge_router_downstream.cfg
new file mode 100755
index 0000000..85bbab8
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_downstream.cfg
@@ -0,0 +1,85 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+;   An edge router typically sits between two networks such as the provider
+;   core network and the provider access network. A typical packet processing
+;   pipeline for the downstream traffic (i.e. traffic from core to access
+;   network) contains the following functional blocks: Packet RX & Routing,
+;   Traffic management and Packet TX. The input packets are assumed to be
+;   IPv4, while the output packets are Q-in-Q IPv4.
+
+;  A simple implementation for this functional pipeline is presented below.
+
+;                  Packet Rx &                Traffic Management               Packet Tx
+;                   Routing                    (Pass-Through)                (Pass-Through)
+;             _____________________  SWQ0  ______________________  SWQ4  _____________________
+; RXQ0.0 --->|                     |----->|                      |----->|                     |---> TXQ0.0
+;            |                     | SWQ1 |                      | SWQ5 |                     |
+; RXQ1.0 --->|                     |----->|                      |----->|                     |---> TXQ1.0
+;            |        (P1)         | SWQ2 |         (P2)         | SWQ6 |        (P3)         |
+; RXQ2.0 --->|                     |----->|                      |----->|                     |---> TXQ2.0
+;            |                     | SWQ3 |                      | SWQ7 |                     |
+; RXQ3.0 --->|                     |----->|                      |----->|                     |---> TXQ3.0
+;            |_____________________|      |______________________|      |_____________________|
+;                       |                 _|_ ^ _|_ ^ _|_ ^ _|_ ^
+;                       |                |___|||___|||___|||___||
+;                       +--> SINK0       |___|||___|||___|||___||
+;                      (route miss)        |__|  |__|  |__|  |__|
+;                                          TM0   TM1   TM2   TM3
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = SWQ0 SWQ1 SWQ2 SWQ3 SINK0
+encap = ethernet_qinq
+qinq_sched = test
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+
+[PIPELINE2]
+type = PASS-THROUGH
+core = 2
+pktq_in = SWQ0 SWQ1 SWQ2 SWQ3 TM0 TM1 TM2 TM3
+pktq_out = TM0 TM1 TM2 TM3 SWQ4 SWQ5 SWQ6 SWQ7
+
+[PIPELINE3]
+type = PASS-THROUGH
+core = 3
+pktq_in = SWQ4 SWQ5 SWQ6 SWQ7
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
+
+[MEMPOOL0]
+pool_size = 2M
diff --git a/examples/ip_pipeline/config/edge_router_downstream.sh b/examples/ip_pipeline/config/edge_router_downstream.sh
new file mode 100755
index 0000000..ce46beb
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_downstream.sh
@@ -0,0 +1,10 @@
+################################################################################
+# Routing: Ether QinQ, ARP off
+################################################################################
+p 1 route add default 4 #SINK0
+p 1 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0 qinq 256 257
+p 1 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1 qinq 258 259
+p 1 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2 qinq 260 261
+p 1 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3 qinq 262 263
+
+p 1 route ls
diff --git a/examples/ip_pipeline/config/edge_router_upstream.cfg b/examples/ip_pipeline/config/edge_router_upstream.cfg
new file mode 100755
index 0000000..a08c5cc
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_upstream.cfg
@@ -0,0 +1,110 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+;   An edge router typically sits between two networks such as the provider
+;   core network and the provider access network. A typical packet processing
+;   pipeline for the upstream traffic (i.e. traffic from access to core
+;   network) contains the following functional blocks: Packet RX & Firewall,
+;   Flow classification, Metering, Routing and Packet TX. The input packets
+;   are assumed to be Q-in-Q IPv4, while the output packets are MPLS IPv4
+;  (with variable number of labels per route).
+
+;   A simple implementation for this functional pipeline is presented below.
+
+;             Packet Rx &       Pass-Through    Flow-Classification   Flow-Actions         Routing
+:              Firewall
+;             __________  SWQ0   __________  SWQ4   __________  SWQ8   __________  SWQ12  __________
+; RXQ0.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ0.0
+;            |          | SWQ1  |          | SWQ5  |          | SWQ9  |          | SWQ13 |          |
+; RXQ1.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ1.0
+;            |   (P1)   | SWQ2  |  (P2)    | SWQ6  |   (P3)   | SWQ10 |   (P4)   | SWQ14 |   (P5)   |
+; RXQ2.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ2.0
+;            |          | SWQ3  |          | SWQ7  |          | SWQ11 |          | SWQ15 |          |
+; RXQ3.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ3.0
+;            |__________|       |__________|       |__________|       |__________|       |__________|
+;                 |                                     |                                     |
+;                 +--> SINK0 (Default)                  +--> SINK1 (Default)                  +--> SINK2 (Route Miss)
+
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = FIREWALL
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = SWQ0 SWQ1 SWQ2 SWQ3 SINK0
+n_rules = 4096
+pkt_type = qinq_ipv4
+
+[PIPELINE2]
+type = PASS-THROUGH
+core = 2
+pktq_in = SWQ0 SWQ1 SWQ2 SWQ3
+pktq_out = SWQ4 SWQ5 SWQ6 SWQ7
+dma_size = 8
+dma_dst_offset = 128; mbuf (128)
+dma_src_offset = 268; mbuf (128) + headroom (128) + 1st ethertype offset (12) = 268
+dma_src_mask = 00000FFF00000FFF; qinq
+dma_hash_offset = 136; dma_dst_offset + dma_size = 136
+
+[PIPELINE3]
+type = FLOW_CLASSIFICATION
+core = 2
+pktq_in = SWQ4 SWQ5 SWQ6 SWQ7
+pktq_out = SWQ8 SWQ9 SWQ10 SWQ11 SINK1
+n_flows = 65536
+key_size = 8; dma_size
+key_offset = 128; dma_dst_offset
+hash_offset = 136; dma_hash_offset
+flowid_offset = 192; mbuf (128) + 64
+
+[PIPELINE4]
+type = FLOW_ACTIONS
+core = 3
+pktq_in = SWQ8 SWQ9 SWQ10 SWQ11
+pktq_out = SWQ12 SWQ13 SWQ14 SWQ15
+n_flows = 65536
+n_meters_per_flow = 1
+flow_id_offset = 192; flowid_offset
+ip_hdr_offset = 278; mbuf (128) + headroom (128) + ethernet (14) + qinq (8) = 278
+color_offset = 196; flowid_offset + sizeof(flow_id)
+
+[PIPELINE5]
+type = ROUTING
+core = 4
+pktq_in = SWQ12 SWQ13 SWQ14 SWQ15
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 SINK2
+encap = ethernet_mpls
+mpls_color_mark = yes
+ip_hdr_offset = 278; mbuf (128) + headroom (128) + ethernet (14) + qinq (8) = 278
+color_offset = 196; flowid_offset + sizeof(flow_id)
diff --git a/examples/ip_pipeline/config/edge_router_upstream.sh b/examples/ip_pipeline/config/edge_router_upstream.sh
new file mode 100755
index 0000000..eeba600
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_upstream.sh
@@ -0,0 +1,38 @@
+################################################
+# Firewall Rules:4 for 4 ports
+################################################
+p 1 firewall add ipv4 1 0.0.0.0 8 0.0.0.0 10 0 0 0 0 6 1 0
+p 1 firewall add ipv4 1 0.0.0.0 8 0.64.0.0 10 0 0 0 0 6 1 1
+p 1 firewall add ipv4 1 0.0.0.0 8 0.128.0.0 10 0 0 0 0 6 1 2
+p 1 firewall add ipv4 1 0.0.0.0 8 0.192.0.0 10 0 0 0 0 6 1 3
+p 1 firewall add default 4 #SINK0
+
+
+################################################################################
+# Flow classification
+################################################################################
+p 3 flow add default 4 #SINK1
+p 3 flow add qinq all 65536 4
+
+################################################################################
+# Flow Actions - Metering
+################################################################################
+p 4 flows 65536 meter 0 trtcm 1250000000 1250000000 100000000 100000000
+p 4 flows 65536 ports 4
+
+################################################################################
+# Routing: Ether MPLS, ARP off
+################################################################################
+p 5 route add default 4 #SINK2
+p 5 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0 mpls 0:1
+p 5 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1 mpls 10:11
+p 5 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2 mpls 20:21
+p 5 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3 mpls 30:31
+
+################################################################################
+# List all configurations
+################################################################################
+p 1 firewall ls
+#p 3 flow ls
+#p 4 flow actions ls
+p 5 route ls
diff --git a/examples/ip_pipeline/config/l2fwd.cfg b/examples/ip_pipeline/config/l2fwd.cfg
new file mode 100755
index 0000000..c743a14
--- /dev/null
+++ b/examples/ip_pipeline/config/l2fwd.cfg
@@ -0,0 +1,55 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+;
+; The pass-through pipeline below connects the input ports to the output ports
+; as follows: RXQ0.0 -> TXQ1.0, RXQ1.0 -> TXQ0.0, RXQ2.0 -> TXQ3.0 and
+; RXQ3.0 -> TXQ2.0.
+;             ________________
+; RXQ0.0 --->|................|---> TXQ1.0
+;            |                |
+; RXQ1.0 --->|................|---> TXQ0.0
+;            |  Pass-through  |
+; RXQ2.0 --->|................|---> TXQ3.0
+;            |                |
+; RXQ3.0 --->|................|---> TXQ2.0
+;            |________________|
+;
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = TXQ1.0 TXQ0.0 TXQ3.0 TXQ2.0
diff --git a/examples/ip_pipeline/config/l3fwd.cfg b/examples/ip_pipeline/config/l3fwd.cfg
new file mode 100755
index 0000000..5449dc3
--- /dev/null
+++ b/examples/ip_pipeline/config/l3fwd.cfg
@@ -0,0 +1,63 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+;             _______________
+; RXQ0.0 --->|               |---> TXQ0.0
+;            |               |
+; RXQ1.0 --->|               |---> TXQ1.0
+;            |    Routing    |
+; RXQ2.0 --->|               |---> TXQ2.0
+;            |               |
+; RXQ3.0 --->|               |---> TXQ3.0
+;            |_______________|
+;                    |
+;                    +-----------> SINK0 (route miss)
+;
+; Input packet: Ethernet/IPv4
+;
+; Packet buffer layout:
+; #	Field Name		Offset (Bytes)	Size (Bytes)
+; 0	Mbuf			0 		128
+; 1	Headroom		128 		128
+; 2	Ethernet header		256 		14
+; 3	IPv4 header		270 		20
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 SINK0
+encap = ethernet; encap = ethernet / ethernet_qinq / ethernet_mpls
+ip_hdr_offset = 270
diff --git a/examples/ip_pipeline/config/l3fwd.sh b/examples/ip_pipeline/config/l3fwd.sh
new file mode 100755
index 0000000..2774010
--- /dev/null
+++ b/examples/ip_pipeline/config/l3fwd.sh
@@ -0,0 +1,9 @@
+################################################################################
+# Routing: encap = ethernet, arp = off
+################################################################################
+p 1 route add default 4 #SINK0
+p 1 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0
+p 1 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1
+p 1 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2
+p 1 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3
+p 1 route ls
-- 
2.5.0

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [dpdk-dev] [PATCH v3] ip_pipeline: add sample configuration/script files
  2015-12-14 12:48   ` [dpdk-dev] [PATCH v3] " Jasvinder Singh
@ 2015-12-14 13:28     ` Thomas Monjalon
  2015-12-14 14:20     ` [dpdk-dev] [PATCH v4] " Jasvinder Singh
  1 sibling, 0 replies; 6+ messages in thread
From: Thomas Monjalon @ 2015-12-14 13:28 UTC (permalink / raw)
  To: Jasvinder Singh; +Cc: dev

2015-12-14 12:48, Jasvinder Singh:
> This patch includes the configuration and script
> files of the some applications which can
> be built using DPDK Packet Framework. A
> configuration file defines the application
> structure which include packet processing stages
> (knowns as pipelines), their connectivity and
> other parameters necessary to start and run the
> application. A script file specifies CLI commands
> required for loading table entries (rules/routes,
> etc). The configuration/script files for simple
> applications such as l2 forwarding, l3 forwarding
> have been presented. In addition, to demonstrate
> the use and inter-connectivity of various pipeline
> modules (which are avilable in packet framework),
> a complex packet processing workload i.e. edge
> router is considered. The configuration of the
> pipeline stages used for upstream and downstream
> flow processing has been specified separately in
> two configuration files. All these configuration
> and script files don't affect the compilation.

Please use at least 70 chars-wide lines.
It would also be easier to read with some paragraphs.

> Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
> Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>

> ---
> *v2
> - correct date in license header(edge_router_downstream/upstream.cfg)
> - modify commit message
> 
> *v3
> - correct date in license header(l2fwd.cfg, l3fwd.cfg)
> 
>  .../ip_pipeline/config/edge_router_downstream.cfg  |  85 ++++++++++++++++
>  .../ip_pipeline/config/edge_router_downstream.sh   |  10 ++
>  .../ip_pipeline/config/edge_router_upstream.cfg    | 110 +++++++++++++++++++++
>  .../ip_pipeline/config/edge_router_upstream.sh     |  38 +++++++
>  examples/ip_pipeline/config/l2fwd.cfg              |  55 +++++++++++
>  examples/ip_pipeline/config/l3fwd.cfg              |  63 ++++++++++++
>  examples/ip_pipeline/config/l3fwd.sh               |   9 ++
>  7 files changed, 370 insertions(+)
>  create mode 100755 examples/ip_pipeline/config/edge_router_downstream.cfg
>  create mode 100755 examples/ip_pipeline/config/edge_router_downstream.sh
>  create mode 100755 examples/ip_pipeline/config/edge_router_upstream.cfg
>  create mode 100755 examples/ip_pipeline/config/edge_router_upstream.sh
>  create mode 100755 examples/ip_pipeline/config/l2fwd.cfg
>  create mode 100755 examples/ip_pipeline/config/l3fwd.cfg
>  create mode 100755 examples/ip_pipeline/config/l3fwd.sh

checkpatch says:
EXECUTE_PERMISSIONS: do not set execute permissions for source files

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [dpdk-dev] [PATCH v4] ip_pipeline: add sample configuration/script files
  2015-12-14 12:48   ` [dpdk-dev] [PATCH v3] " Jasvinder Singh
  2015-12-14 13:28     ` Thomas Monjalon
@ 2015-12-14 14:20     ` Jasvinder Singh
  2015-12-14 21:55       ` Thomas Monjalon
  1 sibling, 1 reply; 6+ messages in thread
From: Jasvinder Singh @ 2015-12-14 14:20 UTC (permalink / raw)
  To: dev

This patch includes the configuration and script files of the some
applications which can be built using DPDK Packet Framework. A
configuration file defines the application structure which include
packet processing stages (knowns as pipelines), their connectivity
and other parameters necessary to start and run the application. A
script file specifies CLI commands required for loading table entries
(rules/routes, etc). The configuration/script files for simple
applications such as l2 forwarding, l3 forwarding have been presented.
In addition, to demonstrate the use and inter-connectivity of various
pipeline modules (which are avilable in packet framework), a complex
packet processing workload i.e. edge router is considered. The
configuration of the pipeline stages used for upstream and downstream
flow processing has been specified separately in two configuration
files. All these configuration and script files don't affect the
compilation.


Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
---
*v2
- correct date in license header(edge_router_downstream/upstream.cfg)
- modify commit message

*v3
- correct date in license header(l2fwd.cfg, l3fwd.cfg)

*v4
- fix checkpatch warnings

 .../ip_pipeline/config/edge_router_downstream.cfg  |  85 ++++++++++++++++
 .../ip_pipeline/config/edge_router_downstream.sh   |  10 ++
 .../ip_pipeline/config/edge_router_upstream.cfg    | 110 +++++++++++++++++++++
 .../ip_pipeline/config/edge_router_upstream.sh     |  38 +++++++
 examples/ip_pipeline/config/l2fwd.cfg              |  55 +++++++++++
 examples/ip_pipeline/config/l3fwd.cfg              |  63 ++++++++++++
 examples/ip_pipeline/config/l3fwd.sh               |   9 ++
 7 files changed, 370 insertions(+)
 create mode 100644 examples/ip_pipeline/config/edge_router_downstream.cfg
 create mode 100644 examples/ip_pipeline/config/edge_router_downstream.sh
 create mode 100644 examples/ip_pipeline/config/edge_router_upstream.cfg
 create mode 100644 examples/ip_pipeline/config/edge_router_upstream.sh
 create mode 100644 examples/ip_pipeline/config/l2fwd.cfg
 create mode 100644 examples/ip_pipeline/config/l3fwd.cfg
 create mode 100644 examples/ip_pipeline/config/l3fwd.sh

diff --git a/examples/ip_pipeline/config/edge_router_downstream.cfg b/examples/ip_pipeline/config/edge_router_downstream.cfg
new file mode 100644
index 0000000..85bbab8
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_downstream.cfg
@@ -0,0 +1,85 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+;   An edge router typically sits between two networks such as the provider
+;   core network and the provider access network. A typical packet processing
+;   pipeline for the downstream traffic (i.e. traffic from core to access
+;   network) contains the following functional blocks: Packet RX & Routing,
+;   Traffic management and Packet TX. The input packets are assumed to be
+;   IPv4, while the output packets are Q-in-Q IPv4.
+
+;  A simple implementation for this functional pipeline is presented below.
+
+;                  Packet Rx &                Traffic Management               Packet Tx
+;                   Routing                    (Pass-Through)                (Pass-Through)
+;             _____________________  SWQ0  ______________________  SWQ4  _____________________
+; RXQ0.0 --->|                     |----->|                      |----->|                     |---> TXQ0.0
+;            |                     | SWQ1 |                      | SWQ5 |                     |
+; RXQ1.0 --->|                     |----->|                      |----->|                     |---> TXQ1.0
+;            |        (P1)         | SWQ2 |         (P2)         | SWQ6 |        (P3)         |
+; RXQ2.0 --->|                     |----->|                      |----->|                     |---> TXQ2.0
+;            |                     | SWQ3 |                      | SWQ7 |                     |
+; RXQ3.0 --->|                     |----->|                      |----->|                     |---> TXQ3.0
+;            |_____________________|      |______________________|      |_____________________|
+;                       |                 _|_ ^ _|_ ^ _|_ ^ _|_ ^
+;                       |                |___|||___|||___|||___||
+;                       +--> SINK0       |___|||___|||___|||___||
+;                      (route miss)        |__|  |__|  |__|  |__|
+;                                          TM0   TM1   TM2   TM3
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = SWQ0 SWQ1 SWQ2 SWQ3 SINK0
+encap = ethernet_qinq
+qinq_sched = test
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+
+[PIPELINE2]
+type = PASS-THROUGH
+core = 2
+pktq_in = SWQ0 SWQ1 SWQ2 SWQ3 TM0 TM1 TM2 TM3
+pktq_out = TM0 TM1 TM2 TM3 SWQ4 SWQ5 SWQ6 SWQ7
+
+[PIPELINE3]
+type = PASS-THROUGH
+core = 3
+pktq_in = SWQ4 SWQ5 SWQ6 SWQ7
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
+
+[MEMPOOL0]
+pool_size = 2M
diff --git a/examples/ip_pipeline/config/edge_router_downstream.sh b/examples/ip_pipeline/config/edge_router_downstream.sh
new file mode 100644
index 0000000..ce46beb
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_downstream.sh
@@ -0,0 +1,10 @@
+################################################################################
+# Routing: Ether QinQ, ARP off
+################################################################################
+p 1 route add default 4 #SINK0
+p 1 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0 qinq 256 257
+p 1 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1 qinq 258 259
+p 1 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2 qinq 260 261
+p 1 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3 qinq 262 263
+
+p 1 route ls
diff --git a/examples/ip_pipeline/config/edge_router_upstream.cfg b/examples/ip_pipeline/config/edge_router_upstream.cfg
new file mode 100644
index 0000000..a08c5cc
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_upstream.cfg
@@ -0,0 +1,110 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+;   An edge router typically sits between two networks such as the provider
+;   core network and the provider access network. A typical packet processing
+;   pipeline for the upstream traffic (i.e. traffic from access to core
+;   network) contains the following functional blocks: Packet RX & Firewall,
+;   Flow classification, Metering, Routing and Packet TX. The input packets
+;   are assumed to be Q-in-Q IPv4, while the output packets are MPLS IPv4
+;  (with variable number of labels per route).
+
+;   A simple implementation for this functional pipeline is presented below.
+
+;             Packet Rx &       Pass-Through    Flow-Classification   Flow-Actions         Routing
+:              Firewall
+;             __________  SWQ0   __________  SWQ4   __________  SWQ8   __________  SWQ12  __________
+; RXQ0.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ0.0
+;            |          | SWQ1  |          | SWQ5  |          | SWQ9  |          | SWQ13 |          |
+; RXQ1.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ1.0
+;            |   (P1)   | SWQ2  |  (P2)    | SWQ6  |   (P3)   | SWQ10 |   (P4)   | SWQ14 |   (P5)   |
+; RXQ2.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ2.0
+;            |          | SWQ3  |          | SWQ7  |          | SWQ11 |          | SWQ15 |          |
+; RXQ3.0 --->|          |------>|          |------>|          |------>|          |------>|          |------> TXQ3.0
+;            |__________|       |__________|       |__________|       |__________|       |__________|
+;                 |                                     |                                     |
+;                 +--> SINK0 (Default)                  +--> SINK1 (Default)                  +--> SINK2 (Route Miss)
+
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = FIREWALL
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = SWQ0 SWQ1 SWQ2 SWQ3 SINK0
+n_rules = 4096
+pkt_type = qinq_ipv4
+
+[PIPELINE2]
+type = PASS-THROUGH
+core = 2
+pktq_in = SWQ0 SWQ1 SWQ2 SWQ3
+pktq_out = SWQ4 SWQ5 SWQ6 SWQ7
+dma_size = 8
+dma_dst_offset = 128; mbuf (128)
+dma_src_offset = 268; mbuf (128) + headroom (128) + 1st ethertype offset (12) = 268
+dma_src_mask = 00000FFF00000FFF; qinq
+dma_hash_offset = 136; dma_dst_offset + dma_size = 136
+
+[PIPELINE3]
+type = FLOW_CLASSIFICATION
+core = 2
+pktq_in = SWQ4 SWQ5 SWQ6 SWQ7
+pktq_out = SWQ8 SWQ9 SWQ10 SWQ11 SINK1
+n_flows = 65536
+key_size = 8; dma_size
+key_offset = 128; dma_dst_offset
+hash_offset = 136; dma_hash_offset
+flowid_offset = 192; mbuf (128) + 64
+
+[PIPELINE4]
+type = FLOW_ACTIONS
+core = 3
+pktq_in = SWQ8 SWQ9 SWQ10 SWQ11
+pktq_out = SWQ12 SWQ13 SWQ14 SWQ15
+n_flows = 65536
+n_meters_per_flow = 1
+flow_id_offset = 192; flowid_offset
+ip_hdr_offset = 278; mbuf (128) + headroom (128) + ethernet (14) + qinq (8) = 278
+color_offset = 196; flowid_offset + sizeof(flow_id)
+
+[PIPELINE5]
+type = ROUTING
+core = 4
+pktq_in = SWQ12 SWQ13 SWQ14 SWQ15
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 SINK2
+encap = ethernet_mpls
+mpls_color_mark = yes
+ip_hdr_offset = 278; mbuf (128) + headroom (128) + ethernet (14) + qinq (8) = 278
+color_offset = 196; flowid_offset + sizeof(flow_id)
diff --git a/examples/ip_pipeline/config/edge_router_upstream.sh b/examples/ip_pipeline/config/edge_router_upstream.sh
new file mode 100644
index 0000000..eeba600
--- /dev/null
+++ b/examples/ip_pipeline/config/edge_router_upstream.sh
@@ -0,0 +1,38 @@
+################################################
+# Firewall Rules:4 for 4 ports
+################################################
+p 1 firewall add ipv4 1 0.0.0.0 8 0.0.0.0 10 0 0 0 0 6 1 0
+p 1 firewall add ipv4 1 0.0.0.0 8 0.64.0.0 10 0 0 0 0 6 1 1
+p 1 firewall add ipv4 1 0.0.0.0 8 0.128.0.0 10 0 0 0 0 6 1 2
+p 1 firewall add ipv4 1 0.0.0.0 8 0.192.0.0 10 0 0 0 0 6 1 3
+p 1 firewall add default 4 #SINK0
+
+
+################################################################################
+# Flow classification
+################################################################################
+p 3 flow add default 4 #SINK1
+p 3 flow add qinq all 65536 4
+
+################################################################################
+# Flow Actions - Metering
+################################################################################
+p 4 flows 65536 meter 0 trtcm 1250000000 1250000000 100000000 100000000
+p 4 flows 65536 ports 4
+
+################################################################################
+# Routing: Ether MPLS, ARP off
+################################################################################
+p 5 route add default 4 #SINK2
+p 5 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0 mpls 0:1
+p 5 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1 mpls 10:11
+p 5 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2 mpls 20:21
+p 5 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3 mpls 30:31
+
+################################################################################
+# List all configurations
+################################################################################
+p 1 firewall ls
+#p 3 flow ls
+#p 4 flow actions ls
+p 5 route ls
diff --git a/examples/ip_pipeline/config/l2fwd.cfg b/examples/ip_pipeline/config/l2fwd.cfg
new file mode 100644
index 0000000..c743a14
--- /dev/null
+++ b/examples/ip_pipeline/config/l2fwd.cfg
@@ -0,0 +1,55 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+;
+; The pass-through pipeline below connects the input ports to the output ports
+; as follows: RXQ0.0 -> TXQ1.0, RXQ1.0 -> TXQ0.0, RXQ2.0 -> TXQ3.0 and
+; RXQ3.0 -> TXQ2.0.
+;             ________________
+; RXQ0.0 --->|................|---> TXQ1.0
+;            |                |
+; RXQ1.0 --->|................|---> TXQ0.0
+;            |  Pass-through  |
+; RXQ2.0 --->|................|---> TXQ3.0
+;            |                |
+; RXQ3.0 --->|................|---> TXQ2.0
+;            |________________|
+;
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = TXQ1.0 TXQ0.0 TXQ3.0 TXQ2.0
diff --git a/examples/ip_pipeline/config/l3fwd.cfg b/examples/ip_pipeline/config/l3fwd.cfg
new file mode 100644
index 0000000..5449dc3
--- /dev/null
+++ b/examples/ip_pipeline/config/l3fwd.cfg
@@ -0,0 +1,63 @@
+;   BSD LICENSE
+;
+;   Copyright(c) 2015 Intel Corporation. All rights reserved.
+;   All rights reserved.
+;
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions
+;   are met:
+;
+;     * Redistributions of source code must retain the above copyright
+;       notice, this list of conditions and the following disclaimer.
+;     * Redistributions in binary form must reproduce the above copyright
+;       notice, this list of conditions and the following disclaimer in
+;       the documentation and/or other materials provided with the
+;       distribution.
+;     * Neither the name of Intel Corporation nor the names of its
+;       contributors may be used to endorse or promote products derived
+;       from this software without specific prior written permission.
+;
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+;             _______________
+; RXQ0.0 --->|               |---> TXQ0.0
+;            |               |
+; RXQ1.0 --->|               |---> TXQ1.0
+;            |    Routing    |
+; RXQ2.0 --->|               |---> TXQ2.0
+;            |               |
+; RXQ3.0 --->|               |---> TXQ3.0
+;            |_______________|
+;                    |
+;                    +-----------> SINK0 (route miss)
+;
+; Input packet: Ethernet/IPv4
+;
+; Packet buffer layout:
+; #	Field Name		Offset (Bytes)	Size (Bytes)
+; 0	Mbuf			0 		128
+; 1	Headroom		128 		128
+; 2	Ethernet header		256 		14
+; 3	IPv4 header		270 		20
+
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0 SINK0
+encap = ethernet; encap = ethernet / ethernet_qinq / ethernet_mpls
+ip_hdr_offset = 270
diff --git a/examples/ip_pipeline/config/l3fwd.sh b/examples/ip_pipeline/config/l3fwd.sh
new file mode 100644
index 0000000..2774010
--- /dev/null
+++ b/examples/ip_pipeline/config/l3fwd.sh
@@ -0,0 +1,9 @@
+################################################################################
+# Routing: encap = ethernet, arp = off
+################################################################################
+p 1 route add default 4 #SINK0
+p 1 route add 0.0.0.0 10 port 0 ether a0:b0:c0:d0:e0:f0
+p 1 route add 0.64.0.0 10 port 1 ether a1:b1:c1:d1:e1:f1
+p 1 route add 0.128.0.0 10 port 2 ether a2:b2:c2:d2:e2:f2
+p 1 route add 0.192.0.0 10 port 3 ether a3:b3:c3:d3:e3:f3
+p 1 route ls
-- 
2.5.0

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [dpdk-dev] [PATCH v4] ip_pipeline: add sample configuration/script files
  2015-12-14 14:20     ` [dpdk-dev] [PATCH v4] " Jasvinder Singh
@ 2015-12-14 21:55       ` Thomas Monjalon
  0 siblings, 0 replies; 6+ messages in thread
From: Thomas Monjalon @ 2015-12-14 21:55 UTC (permalink / raw)
  To: Jasvinder Singh; +Cc: dev

2015-12-14 14:20, Jasvinder Singh:
> This patch includes the configuration and script files of the some
> applications which can be built using DPDK Packet Framework. A
> configuration file defines the application structure which include
> packet processing stages (knowns as pipelines), their connectivity
> and other parameters necessary to start and run the application. A
> script file specifies CLI commands required for loading table entries
> (rules/routes, etc). The configuration/script files for simple
> applications such as l2 forwarding, l3 forwarding have been presented.
> In addition, to demonstrate the use and inter-connectivity of various
> pipeline modules (which are avilable in packet framework), a complex
> packet processing workload i.e. edge router is considered. The
> configuration of the pipeline stages used for upstream and downstream
> flow processing has been specified separately in two configuration
> files. All these configuration and script files don't affect the
> compilation.
> 
> 
> Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
> Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>

Applied, thanks

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2015-12-14 21:56 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-12-10 21:28 [dpdk-dev] [PATCH] ip_pipeline: add sample configuration/script files Jasvinder Singh
2015-12-14 12:12 ` [dpdk-dev] [PATCH v2] " Jasvinder Singh
2015-12-14 12:48   ` [dpdk-dev] [PATCH v3] " Jasvinder Singh
2015-12-14 13:28     ` Thomas Monjalon
2015-12-14 14:20     ` [dpdk-dev] [PATCH v4] " Jasvinder Singh
2015-12-14 21:55       ` Thomas Monjalon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).