[dpdk-dev] [PATCH] mlx4: update documentation

[Olga Shern <olgas@mellanox.com>]

-Split "Features" and "Limitations" sections.
-Update limitations with missing information.
-Update prerequisites with supported MLNX_OFED release, firmware and
 CPU architectures.
-Enhance usage example with openibd script.

Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
---
 doc/guides/nics/mlx4.rst |   24 +++++++++++++++++++-----
 1 files changed, 19 insertions(+), 5 deletions(-)

diff --git a/doc/guides/nics/mlx4.rst b/doc/guides/nics/mlx4.rst
index 562db06..62f0c31 100644
--- a/doc/guides/nics/mlx4.rst
+++ b/doc/guides/nics/mlx4.rst
@@ -78,8 +78,8 @@ long as they share the same MAC address.
 
 Compiling librte_pmd_mlx4 causes DPDK to be linked against libibverbs.
 
-Features and limitations
-------------------------
+Features
+---------
 
 - RSS, also known as RCA, is supported. In this mode the number of
   configured RX queues must be a power of two.
@@ -91,11 +91,17 @@ Features and limitations
 - Scattered packets are supported for TX and RX.
 - Inner L3/L4 (IP, TCP and UDP) TX/RX checksum offloading and validation.
 - Outer L3 (IP) TX/RX checksum offloading and validation for VXLAN frames.
+- Secondary process TX is supported.
 
-.. break
+Limitations
+-----------
 
 - RSS hash key cannot be modified.
+- RSS RETA cannot be configured
+- RSS always includes L3 (IPv4/IPv6) and L4 (UDP/TCP). They cannot be
+  dissociated.
 - Hardware counters are not implemented (they are software counters).
+- Secondary process RX is not supported
 
 Configuration
 -------------
@@ -237,8 +243,9 @@ DPDK and must be installed separately:
 
 Currently supported by DPDK:
 
-- Mellanox OFED **3.0**.
-- Firmware version **2.34.5000** and higher.
+- Mellanox OFED **3.1**.
+- Firmware version **2.35.5100** and higher.
+- Supported architectures:  **x86_64** and **POWER8**.
 
 Getting Mellanox OFED
 ~~~~~~~~~~~~~~~~~~~~~
@@ -272,6 +279,13 @@ devices managed by librte_pmd_mlx4.
 
       modprobe -a ib_uverbs mlx4_en mlx4_core mlx4_ib
 
+   Alternatively if MLNX_OFED is fully installed, the follwoing script can
+   be run:
+
+   .. code-block:: console
+
+      /etc/init.d/openibd restart
+
    .. note::
 
       User space I/O kernel modules (uio and igb_uio) are not used and do
-- 
1.7.8.2