From: Wenzhuo Lu <wenzhuo.lu@intel.com>
To: dev@dpdk.org
Cc: root <root@localhost.localdomain>
Subject: [dpdk-dev] [PATCH] ixgbe: fix link down issue on x550em_x
Date: Mon, 21 Dec 2015 15:56:32 +0800 [thread overview]
Message-ID: <1450684592-13564-1-git-send-email-wenzhuo.lu@intel.com> (raw)
Normally the auto-negotiation is supported by FW. But on
X550EM_X_10G_T it's not supported by FW. As the port of
X550EM_X_10G_T is 10G. If we connect the port with a peer
which is 1G. The link is always down.
We have to supprted auto-neg by SW to avoid such link down
issue.
Signed-off-by: root <root@localhost.localdomain>
---
doc/guides/rel_notes/release_2_3.rst | 6 ++++++
drivers/net/ixgbe/ixgbe_ethdev.c | 38 ++++++++++++++++++++++++++++++++++++
drivers/net/ixgbe/ixgbe_ethdev.h | 1 +
3 files changed, 45 insertions(+)
diff --git a/doc/guides/rel_notes/release_2_3.rst b/doc/guides/rel_notes/release_2_3.rst
index 99de186..a8d34d1 100644
--- a/doc/guides/rel_notes/release_2_3.rst
+++ b/doc/guides/rel_notes/release_2_3.rst
@@ -15,6 +15,12 @@ EAL
Drivers
~~~~~~~
+* **ixgbe: fix link down issue on X550EM_X.**
+ Normally the auto-negotiation is supported by FW. SW need not care about
+ that. But on x550em_x, FW doesn't support auto-neg. As the ports of x550em_x
+ are 10G, if we connect the port will a peer which is 1G, the link will always
+ be donw on x550em_x.
+ We will support auto-neg by SW to avoid this link down issue.
Libraries
~~~~~~~~~
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 4c4c6df..a71c49f 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -1961,6 +1961,25 @@ ixgbe_dev_configure(struct rte_eth_dev *dev)
return 0;
}
+static void
+ixgbe_dev_phy_intr_setup(struct rte_eth_dev *dev)
+{
+ struct ixgbe_hw *hw =
+ IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct ixgbe_interrupt *intr =
+ IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
+ uint32_t gpie;
+
+ /* only set up it on X550EM_X */
+ if (hw->mac.type == ixgbe_mac_X550EM_x) {
+ gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
+ gpie |= IXGBE_SDP0_GPIEN_X550EM_x;
+ IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
+ if (hw->phy.type == ixgbe_phy_x550em_ext_t)
+ intr->mask |= IXGBE_EICR_GPI_SDP0_X550EM_x;
+ }
+}
+
/*
* Configure device link speed and setup link.
* It returns 0 on success.
@@ -2009,6 +2028,8 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
/* configure PF module if SRIOV enabled */
ixgbe_pf_host_configure(dev);
+ ixgbe_dev_phy_intr_setup(dev);
+
/* check and configure queue intr-vector mapping */
if ((rte_intr_cap_multiple(intr_handle) ||
!RTE_ETH_DEV_SRIOV(dev).active) &&
@@ -3082,6 +3103,11 @@ ixgbe_dev_interrupt_get_status(struct rte_eth_dev *dev)
if (eicr & IXGBE_EICR_MAILBOX)
intr->flags |= IXGBE_FLAG_MAILBOX;
+ if (hw->mac.type == ixgbe_mac_X550EM_x &&
+ hw->phy.type == ixgbe_phy_x550em_ext_t &&
+ (eicr & IXGBE_EICR_GPI_SDP0_X550EM_x))
+ intr->flags |= IXGBE_FLAG_PHY_INTERRUPT;
+
return 0;
}
@@ -3137,6 +3163,8 @@ ixgbe_dev_interrupt_action(struct rte_eth_dev *dev)
int64_t timeout;
struct rte_eth_link link;
int intr_enable_delay = false;
+ struct ixgbe_hw *hw =
+ IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
PMD_DRV_LOG(DEBUG, "intr action type %d", intr->flags);
@@ -3145,6 +3173,11 @@ ixgbe_dev_interrupt_action(struct rte_eth_dev *dev)
intr->flags &= ~IXGBE_FLAG_MAILBOX;
}
+ if (intr->flags & IXGBE_FLAG_PHY_INTERRUPT) {
+ ixgbe_handle_lasi(hw);
+ intr->flags &= ~IXGBE_FLAG_PHY_INTERRUPT;
+ }
+
if (intr->flags & IXGBE_FLAG_NEED_LINK_UPDATE) {
/* get the link status before link update, for predicting later */
memset(&link, 0, sizeof(link));
@@ -3208,6 +3241,11 @@ ixgbe_dev_interrupt_delayed_handler(void *param)
if (eicr & IXGBE_EICR_MAILBOX)
ixgbe_pf_mbx_process(dev);
+ if (intr->flags & IXGBE_FLAG_PHY_INTERRUPT) {
+ ixgbe_handle_lasi(hw);
+ intr->flags &= ~IXGBE_FLAG_PHY_INTERRUPT;
+ }
+
if (intr->flags & IXGBE_FLAG_NEED_LINK_UPDATE) {
ixgbe_dev_link_update(dev, 0);
intr->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE;
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
index d26771a..5c3aa16 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.h
+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
@@ -42,6 +42,7 @@
/* need update link, bit flag */
#define IXGBE_FLAG_NEED_LINK_UPDATE (uint32_t)(1 << 0)
#define IXGBE_FLAG_MAILBOX (uint32_t)(1 << 1)
+#define IXGBE_FLAG_PHY_INTERRUPT (uint32_t)(1 << 2)
/*
* Defines that were not part of ixgbe_type.h as they are not used by the
--
1.9.3
next reply other threads:[~2015-12-21 7:56 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-21 7:56 Wenzhuo Lu [this message]
2016-02-01 8:22 ` He, Shaopeng
2016-02-01 8:26 ` Lu, Wenzhuo
2016-02-01 8:42 ` [dpdk-dev] [PATCH v2] " Wenzhuo Lu
2016-02-04 6:21 ` He, Shaopeng
2016-02-24 14:26 ` Bruce Richardson
2016-02-25 1:32 ` Lu, Wenzhuo
2016-02-25 13:29 ` Bruce Richardson
2016-02-26 0:46 ` Lu, Wenzhuo
2016-02-24 14:26 ` Bruce Richardson
2016-02-25 1:35 ` Lu, Wenzhuo
2016-02-26 3:05 ` [dpdk-dev] [PATCH v3] ixgbe: support link speed auto-neg " Wenzhuo Lu
2016-03-08 17:34 ` Bruce Richardson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450684592-13564-1-git-send-email-wenzhuo.lu@intel.com \
--to=wenzhuo.lu@intel.com \
--cc=dev@dpdk.org \
--cc=root@localhost.localdomain \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).