From: Laurent GUERBY <laurent@guerby.net>
To: "Wiles, Keith" <keith.wiles@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] Errors Rx count increasing while pktgen doing nothing on Intel 82598EB 10G
Date: Sun, 27 Dec 2015 21:09:59 +0100 [thread overview]
Message-ID: <1451246999.2052.21.camel@guerby.net> (raw)
In-Reply-To: <3FD3743F-667A-46AE-B144-8B5573E224F1@intel.com>
On Sun, 2015-12-27 at 19:43 +0000, Wiles, Keith wrote:
> On 12/27/15, 12:31 PM, "dev on behalf of Laurent GUERBY" <dev-bounces@dpdk.org on behalf of laurent@guerby.net> wrote:
>
> >Hi,
> >
> >I reported today an issue when using Pktgen-DPDK:
> >https://github.com/pktgen/Pktgen-DPDK/issues/52
> >
> >But I think it's more in DPDK than pktgen
> >
> >two identical machines with SFP+ DA cable between them
> >DPDK 2.2.0 from tarball
> >Pktgen-DPDK from git
> >two identical machines:
> >core i7 2600 (sandy bridge 4C/8T), HT disabled in the BIOS
> >ASUS P8H67-M PRO BIOS 3904 (latest available)
> >Ethernet controller: Intel Corporation 82598EB 10-Gigabit AF Dual Port
> >Network Connection (rev 01)
> >01:00.0 0200: 8086:10f1 (rev 01)
> > Subsystem: 8086:a21f
> >boot kernel 3.16 unbutu 14.04 with isolcpus=2,3,4
> >
> >When launching pktgen even with no TX asked the Errors RX counters keeps
> >going up by about 7.4 millions per second:
> >
> >Errors Rx/Tx : 7471857054/0
> >
> >In the log I get "Could not enable Rx Queue", might be the
> >source of the issue?
> >
> >PMD: ixgbe_dev_rx_queue_start(): Could not enable Rx Queue 0
> >PMD: ixgbe_dev_rx_queue_start(): Could not enable Rx Queue 1
> >
> >When sending traffic single UDP src/dst/IP/MAC the setup
> >reaches 14204188 pps 64 bytes, the error counter is also
> >increasing.
> >
> >Any idea what to look for?
>
> One more suggestion is to run test_pmd on one machine and something
> like iperf on the other to verify the DPDK is working correct, which I
> assume will be true. Not sure the RX errors are reported in the
> test_pmd or you could use the l3fwd application too.
Ok, I will check the test_pmd documentation and try to do this test: I'm
just starting on DPDK :).
> Please also send me the 'lspci | grep Ethernet’ output.
I included one line in my original email above (plus extract of lspci
-vn), here is the full output of the command:
01:00.0 Ethernet controller: Intel Corporation 82598EB 10-Gigabit AF
Dual Port Network Connection (rev 01)
01:00.1 Ethernet controller: Intel Corporation 82598EB 10-Gigabit AF
Dual Port Network Connection (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
(The realtek is used only for internet connectivity).
> Also send me the command line.
On the first machine t1 :
root@t1:~/pktgen-dpdk# ./app/app/x86_64-native-linuxapp-gcc/pktgen \
-c e -n 1 --proc-type auto -- -m '[2:3].1' -P -f t1-t3.pkt -N
And on the other machine t3:
root@t3:~/pktgen-dpdk# ./app/app/x86_64-native-linuxapp-gcc/pktgen \
-c e -n 1 --proc-type auto -- -m '[2:3].1' -P -f t3-t1.pkt -N
The two "-f" pkt files are attached to this email, I do "start 1"
manually at the pktgen prompt.
Thanks for your time,
Sincerely,
Laurent
> >
> >Laurent
> >
> >
>
>
> Regards,
> Keith
>
>
>
>
next prev parent reply other threads:[~2015-12-27 20:10 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-27 18:31 Laurent GUERBY
2015-12-27 19:43 ` Wiles, Keith
2015-12-27 20:09 ` Laurent GUERBY [this message]
2015-12-27 20:28 ` Wiles, Keith
2016-01-27 6:50 ` Moon-Sang Lee
2016-01-27 7:15 ` Laurent GUERBY
2016-01-27 7:23 ` Zhang, Helin
2016-01-28 0:57 ` Moon-Sang Lee
2016-01-29 10:02 ` Moon-Sang Lee
2016-01-30 1:23 ` Wiles, Keith
2016-01-30 1:55 ` Wiles, Keith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1451246999.2052.21.camel@guerby.net \
--to=laurent@guerby.net \
--cc=dev@dpdk.org \
--cc=keith.wiles@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).