DPDK patches and discussions
 help / color / mirror / Atom feed
From: Santosh Shukla <sshukla@mvista.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v3 01/12] virtio: Introduce config RTE_VIRTIO_INC_VECTOR
Date: Thu,  7 Jan 2016 22:02:58 +0530	[thread overview]
Message-ID: <1452184390-5994-2-git-send-email-sshukla@mvista.com> (raw)
In-Reply-To: <1452184390-5994-1-git-send-email-sshukla@mvista.com>

virtio_recv_pkts_vec and other virtio vector friend apis are written for sse/avx
instructions. For arm64 in particular, virtio vector implementation does not
exist(todo).

So virtio pmd driver wont build for targets like i686, arm64.  By making
RTE_VIRTIO_INC_VECTOR=n, Driver can build for non-sse/avx targets and will work
in non-vectored virtio mode.

Signed-off-by: Santosh Shukla <sshukla@mvista.com>
---
 config/common_linuxapp           |    1 +
 drivers/net/virtio/Makefile      |    2 +-
 drivers/net/virtio/virtio_rxtx.c |    7 +++++++
 3 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/config/common_linuxapp b/config/common_linuxapp
index 74bc515..8677697 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -274,6 +274,7 @@ CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
+CONFIG_RTE_VIRTIO_INC_VECTOR=y
 
 #
 # Compile burst-oriented VMXNET3 PMD driver
diff --git a/drivers/net/virtio/Makefile b/drivers/net/virtio/Makefile
index 43835ba..25a842d 100644
--- a/drivers/net/virtio/Makefile
+++ b/drivers/net/virtio/Makefile
@@ -50,7 +50,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += virtqueue.c
 SRCS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += virtio_pci.c
 SRCS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += virtio_rxtx.c
 SRCS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += virtio_ethdev.c
-SRCS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += virtio_rxtx_simple.c
+SRCS-$(CONFIG_RTE_VIRTIO_INC_VECTOR) += virtio_rxtx_simple.c
 
 # this lib depends upon:
 DEPDIRS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += lib/librte_eal lib/librte_ether
diff --git a/drivers/net/virtio/virtio_rxtx.c b/drivers/net/virtio/virtio_rxtx.c
index 74b39ef..23be1ff 100644
--- a/drivers/net/virtio/virtio_rxtx.c
+++ b/drivers/net/virtio/virtio_rxtx.c
@@ -438,7 +438,9 @@ virtio_dev_rx_queue_setup(struct rte_eth_dev *dev,
 
 	dev->data->rx_queues[queue_idx] = vq;
 
+#ifdef RTE_VIRTIO_INC_VECTOR
 	virtio_rxq_vec_setup(vq);
+#endif
 
 	return 0;
 }
@@ -464,7 +466,10 @@ virtio_dev_tx_queue_setup(struct rte_eth_dev *dev,
 			const struct rte_eth_txconf *tx_conf)
 {
 	uint8_t vtpci_queue_idx = 2 * queue_idx + VTNET_SQ_TQ_QUEUE_IDX;
+
+#ifdef RTE_VIRTIO_INC_VECTOR
 	struct virtio_hw *hw = dev->data->dev_private;
+#endif
 	struct virtqueue *vq;
 	uint16_t tx_free_thresh;
 	int ret;
@@ -477,6 +482,7 @@ virtio_dev_tx_queue_setup(struct rte_eth_dev *dev,
 		return -EINVAL;
 	}
 
+#ifdef RTE_VIRTIO_INC_VECTOR
 	/* Use simple rx/tx func if single segment and no offloads */
 	if ((tx_conf->txq_flags & VIRTIO_SIMPLE_FLAGS) == VIRTIO_SIMPLE_FLAGS &&
 	     !vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
@@ -485,6 +491,7 @@ virtio_dev_tx_queue_setup(struct rte_eth_dev *dev,
 		dev->rx_pkt_burst = virtio_recv_pkts_vec;
 		use_simple_rxtx = 1;
 	}
+#endif
 
 	ret = virtio_dev_queue_setup(dev, VTNET_TQ, queue_idx, vtpci_queue_idx,
 			nb_desc, socket_id, &vq);
-- 
1.7.9.5

  reply	other threads:[~2016-01-07 16:34 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-07 16:32 [dpdk-dev] [PATCH v3 00/12] Add virtio support for arm/arm64 Santosh Shukla
2016-01-07 16:32 ` Santosh Shukla [this message]
2016-01-07 16:32 ` [dpdk-dev] [PATCH v3 02/12] config: i686: set RTE_VIRTIO_INC_VECTOR=n Santosh Shukla
2016-01-07 16:33 ` [dpdk-dev] [PATCH v3 03/12] linuxapp: eal: arm: Always return 0 for rte_eal_iopl_init() Santosh Shukla
2016-01-07 18:14   ` Stephen Hemminger
2016-01-09 13:18     ` Santosh Shukla
2016-01-07 16:33 ` [dpdk-dev] [PATCH v3 04/12] linuxapp/vfio: ignore mapping for ioport region Santosh Shukla
2016-01-07 18:16   ` Stephen Hemminger
2016-01-07 18:53     ` Santosh Shukla
2016-01-08  7:29       ` Yuanhan Liu
2016-01-07 16:33 ` [dpdk-dev] [PATCH v3 05/12] virtio_pci.h: build fix for sys/io.h for non-x86 arch Santosh Shukla
2016-01-07 16:33 ` [dpdk-dev] [PATCH v3 06/12] eal: pci: vfio: add rd/wr func for pci bar space Santosh Shukla
2016-01-07 18:19   ` Stephen Hemminger
2016-01-07 18:26     ` Wiles, Keith
2016-01-07 18:39       ` Stephen Hemminger
2016-01-07 18:48         ` Santosh Shukla
2016-01-07 18:46     ` Santosh Shukla
2016-01-13 14:47     ` Bruce Richardson
2016-01-07 16:33 ` [dpdk-dev] [PATCH v3 07/12] virtio: vfio: add api support to rd/wr ioport bar Santosh Shukla
2016-01-07 16:33 ` [dpdk-dev] [PATCH v3 08/12] virtio: Add capability to initialize driver for vfio interface Santosh Shukla
2016-01-07 16:33 ` [dpdk-dev] [PATCH v3 09/12] virtio: vfio: Enable RTE_PCI_DRV_NEED_MAPPING flag in driver Santosh Shukla
2016-01-07 18:20   ` Stephen Hemminger
2016-01-09 12:38     ` Santosh Shukla
2016-01-12  7:14       ` Yuanhan Liu
2016-01-13 12:18         ` Santosh Shukla
2016-01-07 16:33 ` [dpdk-dev] [PATCH v3 10/12] config: armv7/v8: Enable RTE_LIBRTE_VIRTIO_PMD Santosh Shukla
2016-01-07 16:33 ` [dpdk-dev] [PATCH v3 11/12] vfio: Support for no-IOMMU mode Santosh Shukla
2016-01-07 16:33 ` [dpdk-dev] [PATCH v3 12/12] eal: pci: vfio: fix build error Santosh Shukla
2016-01-07 17:02   ` Burakov, Anatoly

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1452184390-5994-2-git-send-email-sshukla@mvista.com \
    --to=sshukla@mvista.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).