* [dpdk-dev] [PATCH v3 1/2] i40evf: allocate virtchnl cmd buffer for each vf
2016-02-26 6:51 ` [dpdk-dev] [PATCH v3 0/2] i40evf: pf reset event report Jingjing Wu
@ 2016-02-26 6:51 ` Jingjing Wu
2016-02-26 8:12 ` Zhang, Helin
2016-02-26 6:51 ` [dpdk-dev] [PATCH v3 2/2] i40evf: support to report pf reset event Jingjing Wu
` (3 subsequent siblings)
4 siblings, 1 reply; 42+ messages in thread
From: Jingjing Wu @ 2016-02-26 6:51 UTC (permalink / raw)
To: bruce.richardson; +Cc: dev
Currently, i40evf PMD uses a global static buffer to send virtchnl
command to host driver. It is shared by multi VFs.
This patch changed to allocate virtchnl cmd buffer for each VF.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
---
drivers/net/i40e/i40e_ethdev.h | 2 +
drivers/net/i40e/i40e_ethdev_vf.c | 178 +++++++++++++++-----------------------
2 files changed, 71 insertions(+), 109 deletions(-)
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index db6173a..93adc49 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -494,7 +494,9 @@ struct i40e_vf {
bool link_up;
bool vf_reset;
volatile uint32_t pend_cmd; /* pending command not finished yet */
+ uint32_t cmd_retval; /* return value of the cmd response from PF */
u16 pend_msg; /* flags indicates events from pf not handled yet */
+ uint8_t *aq_resp; /* buffer to store the adminq response from PF */
/* VSI info */
struct i40e_virtchnl_vf_resource *vf_res; /* All VSIs */
diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
index 13c5b3d..4b15ed6 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -103,9 +103,6 @@ enum i40evf_aq_result {
I40EVF_MSG_CMD, /* Read async command result */
};
-/* A share buffer to store the command result from PF driver */
-static uint8_t cmd_result_buffer[I40E_AQ_BUF_SZ];
-
static int i40evf_dev_configure(struct rte_eth_dev *dev);
static int i40evf_dev_start(struct rte_eth_dev *dev);
static void i40evf_dev_stop(struct rte_eth_dev *dev);
@@ -237,31 +234,37 @@ i40evf_set_mac_type(struct i40e_hw *hw)
}
/*
- * Parse admin queue message.
- *
- * return value:
- * < 0: meet error
- * 0: read sys msg
- * > 0: read cmd result
+ * Read data in admin queue to get msg from pf driver
*/
static enum i40evf_aq_result
-i40evf_parse_pfmsg(struct i40e_vf *vf,
- struct i40e_arq_event_info *event,
- struct i40evf_arq_msg_info *data)
+i40evf_read_pfmsg(struct rte_eth_dev *dev, struct i40evf_arq_msg_info *data)
{
- enum i40e_virtchnl_ops opcode = (enum i40e_virtchnl_ops)\
- rte_le_to_cpu_32(event->desc.cookie_high);
- enum i40e_status_code retval = (enum i40e_status_code)\
- rte_le_to_cpu_32(event->desc.cookie_low);
- enum i40evf_aq_result ret = I40EVF_MSG_CMD;
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
+ struct i40e_arq_event_info event;
+ enum i40e_virtchnl_ops opcode;
+ enum i40e_status_code retval;
+ int ret;
+ enum i40evf_aq_result result = I40EVF_MSG_NON;
+
+ event.buf_len = data->buf_len;
+ event.msg_buf = data->msg;
+ ret = i40e_clean_arq_element(hw, &event, NULL);
+ /* Can't read any msg from adminQ */
+ if (ret) {
+ if (ret != I40E_ERR_ADMIN_QUEUE_NO_WORK)
+ result = I40EVF_MSG_ERR;
+ return result;
+ }
+ opcode = (enum i40e_virtchnl_ops)rte_le_to_cpu_32(event.desc.cookie_high);
+ retval = (enum i40e_status_code)rte_le_to_cpu_32(event.desc.cookie_low);
/* pf sys event */
if (opcode == I40E_VIRTCHNL_OP_EVENT) {
struct i40e_virtchnl_pf_event *vpe =
- (struct i40e_virtchnl_pf_event *)event->msg_buf;
+ (struct i40e_virtchnl_pf_event *)event.msg_buf;
- /* Initialize ret to sys event */
- ret = I40EVF_MSG_SYS;
+ result = I40EVF_MSG_SYS;
switch (vpe->event) {
case I40E_VIRTCHNL_EVENT_LINK_CHANGE:
vf->link_up =
@@ -286,74 +289,17 @@ i40evf_parse_pfmsg(struct i40e_vf *vf,
}
} else {
/* async reply msg on command issued by vf previously */
- ret = I40EVF_MSG_CMD;
+ result = I40EVF_MSG_CMD;
/* Actual data length read from PF */
- data->msg_len = event->msg_len;
+ data->msg_len = event.msg_len;
}
- /* fill the ops and result to notify VF */
+
data->result = retval;
data->ops = opcode;
- return ret;
-}
-
-/*
- * Read data in admin queue to get msg from pf driver
- */
-static enum i40evf_aq_result
-i40evf_read_pfmsg(struct rte_eth_dev *dev, struct i40evf_arq_msg_info *data)
-{
- struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
- struct i40e_arq_event_info event;
- int ret;
- enum i40evf_aq_result result = I40EVF_MSG_NON;
-
- event.buf_len = data->buf_len;
- event.msg_buf = data->msg;
- ret = i40e_clean_arq_element(hw, &event, NULL);
- /* Can't read any msg from adminQ */
- if (ret) {
- if (ret == I40E_ERR_ADMIN_QUEUE_NO_WORK)
- result = I40EVF_MSG_NON;
- else
- result = I40EVF_MSG_ERR;
- return result;
- }
-
- /* Parse the event */
- result = i40evf_parse_pfmsg(vf, &event, data);
-
return result;
}
-/*
- * Polling read until command result return from pf driver or meet error.
- */
-static int
-i40evf_wait_cmd_done(struct rte_eth_dev *dev,
- struct i40evf_arq_msg_info *data)
-{
- int i = 0;
- enum i40evf_aq_result ret;
-
-#define MAX_TRY_TIMES 20
-#define ASQ_DELAY_MS 100
- do {
- /* Delay some time first */
- rte_delay_ms(ASQ_DELAY_MS);
- ret = i40evf_read_pfmsg(dev, data);
- if (ret == I40EVF_MSG_CMD)
- return 0;
- else if (ret == I40EVF_MSG_ERR)
- return -1;
-
- /* If don't read msg or read sys event, continue */
- } while(i++ < MAX_TRY_TIMES);
-
- return -1;
-}
-
/**
* clear current command. Only call in case execute
* _atomic_set_cmd successfully.
@@ -380,13 +326,18 @@ _atomic_set_cmd(struct i40e_vf *vf, enum i40e_virtchnl_ops ops)
return !ret;
}
+#define MAX_TRY_TIMES 200
+#define ASQ_DELAY_MS 10
+
static int
i40evf_execute_vf_cmd(struct rte_eth_dev *dev, struct vf_cmd_info *args)
{
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
- int err = -1;
struct i40evf_arq_msg_info info;
+ enum i40evf_aq_result ret;
+ int err = -1;
+ int i = 0;
if (_atomic_set_cmd(vf, args->ops))
return -1;
@@ -404,19 +355,21 @@ i40evf_execute_vf_cmd(struct rte_eth_dev *dev, struct vf_cmd_info *args)
return err;
}
- err = i40evf_wait_cmd_done(dev, &info);
- /* read message and it's expected one */
- if (!err && args->ops == info.ops)
- _clear_cmd(vf);
- else if (err) {
- PMD_DRV_LOG(ERR, "Failed to read message from AdminQ");
- _clear_cmd(vf);
- }
- else if (args->ops != info.ops)
- PMD_DRV_LOG(ERR, "command mismatch, expect %u, get %u",
- args->ops, info.ops);
+ do {
+ ret = i40evf_read_pfmsg(dev, &info);
+ if (ret == I40EVF_MSG_CMD) {
+ err = 0;
+ break;
+ } else if (ret == I40EVF_MSG_ERR) {
+ err = -1;
+ break;
+ }
+ rte_delay_ms(ASQ_DELAY_MS);
+ /* If don't read msg or read sys event, continue */
+ } while (i++ < MAX_TRY_TIMES);
+ _clear_cmd(vf);
- return err | info.result;
+ return err | vf->cmd_retval;
}
/*
@@ -436,7 +389,7 @@ i40evf_check_api_version(struct rte_eth_dev *dev)
args.ops = I40E_VIRTCHNL_OP_VERSION;
args.in_args = (uint8_t *)&version;
args.in_args_size = sizeof(version);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -474,7 +427,7 @@ i40evf_get_vf_resource(struct rte_eth_dev *dev)
uint32_t caps, len;
args.ops = I40E_VIRTCHNL_OP_GET_VF_RESOURCES;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
if (PF_IS_V11(vf)) {
caps = I40E_VIRTCHNL_VF_OFFLOAD_L2 |
@@ -527,7 +480,7 @@ i40evf_config_promisc(struct rte_eth_dev *dev,
args.ops = I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE;
args.in_args = (uint8_t *)&promisc;
args.in_args_size = sizeof(promisc);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -554,7 +507,7 @@ i40evf_config_vlan_offload(struct rte_eth_dev *dev,
args.ops = (enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_CFG_VLAN_OFFLOAD;
args.in_args = (uint8_t *)&offload;
args.in_args_size = sizeof(offload);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -585,7 +538,7 @@ i40evf_config_vlan_pvid(struct rte_eth_dev *dev,
args.ops = (enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_CFG_VLAN_PVID;
args.in_args = (uint8_t *)&tpid_info;
args.in_args_size = sizeof(tpid_info);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -664,7 +617,7 @@ i40evf_configure_vsi_queues(struct rte_eth_dev *dev)
args.ops = I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES;
args.in_args = (uint8_t *)vc_vqci;
args.in_args_size = size;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
ret = i40evf_execute_vf_cmd(dev, &args);
if (ret)
@@ -717,7 +670,7 @@ i40evf_configure_vsi_queues_ext(struct rte_eth_dev *dev)
(enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES_EXT;
args.in_args = (uint8_t *)vc_vqcei;
args.in_args_size = size;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
ret = i40evf_execute_vf_cmd(dev, &args);
if (ret)
@@ -779,7 +732,7 @@ i40evf_config_irq_map(struct rte_eth_dev *dev)
args.ops = I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP;
args.in_args = (u8 *)cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -810,7 +763,7 @@ i40evf_switch_queue(struct rte_eth_dev *dev, bool isrx, uint16_t qid,
args.ops = I40E_VIRTCHNL_OP_DISABLE_QUEUES;
args.in_args = (u8 *)&queue_select;
args.in_args_size = sizeof(queue_select);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -902,7 +855,7 @@ i40evf_add_mac_addr(struct rte_eth_dev *dev, struct ether_addr *addr)
args.ops = I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS;
args.in_args = cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -939,7 +892,7 @@ i40evf_del_mac_addr(struct rte_eth_dev *dev, struct ether_addr *addr)
args.ops = I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS;
args.in_args = cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -962,7 +915,7 @@ i40evf_update_stats(struct rte_eth_dev *dev, struct i40e_eth_stats **pstats)
args.ops = I40E_VIRTCHNL_OP_GET_STATS;
args.in_args = (u8 *)&q_stats;
args.in_args_size = sizeof(q_stats);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -1056,7 +1009,7 @@ i40evf_add_vlan(struct rte_eth_dev *dev, uint16_t vlanid)
args.ops = I40E_VIRTCHNL_OP_ADD_VLAN;
args.in_args = (u8 *)&cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -1083,7 +1036,7 @@ i40evf_del_vlan(struct rte_eth_dev *dev, uint16_t vlanid)
args.ops = I40E_VIRTCHNL_OP_DEL_VLAN;
args.in_args = (u8 *)&cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -1095,6 +1048,7 @@ i40evf_del_vlan(struct rte_eth_dev *dev, uint16_t vlanid)
static int
i40evf_get_link_status(struct rte_eth_dev *dev, struct rte_eth_link *link)
{
+ struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
int err;
struct vf_cmd_info args;
struct rte_eth_link *new_link;
@@ -1102,7 +1056,7 @@ i40evf_get_link_status(struct rte_eth_dev *dev, struct rte_eth_link *link)
args.ops = (enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_GET_LINK_STAT;
args.in_args = NULL;
args.in_args_size = 0;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err) {
@@ -1196,7 +1150,6 @@ i40evf_init_vf(struct rte_eth_dev *dev)
goto err;
}
-
/* Reset VF and wait until it's complete */
if (i40evf_reset_vf(hw)) {
PMD_INIT_LOG(ERR, "reset NIC failed");
@@ -1214,6 +1167,11 @@ i40evf_init_vf(struct rte_eth_dev *dev)
PMD_INIT_LOG(ERR, "init_adminq failed");
return -1;
}
+ vf->aq_resp = rte_zmalloc("vf_aq_resp", I40E_AQ_BUF_SZ, 0);
+ if (!vf->aq_resp) {
+ PMD_INIT_LOG(ERR, "unable to allocate vf_aq_resp memory");
+ goto err_aq;
+ }
if (i40evf_check_api_version(dev) != 0) {
PMD_INIT_LOG(ERR, "check_api version failed");
goto err_aq;
@@ -1279,6 +1237,8 @@ i40evf_uninit_vf(struct rte_eth_dev *dev)
i40evf_dev_close(dev);
rte_free(vf->vf_res);
vf->vf_res = NULL;
+ rte_free(vf->aq_resp);
+ vf->aq_resp = NULL;
return 0;
}
--
2.4.0
^ permalink raw reply [flat|nested] 42+ messages in thread* Re: [dpdk-dev] [PATCH v3 1/2] i40evf: allocate virtchnl cmd buffer for each vf
2016-02-26 6:51 ` [dpdk-dev] [PATCH v3 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
@ 2016-02-26 8:12 ` Zhang, Helin
0 siblings, 0 replies; 42+ messages in thread
From: Zhang, Helin @ 2016-02-26 8:12 UTC (permalink / raw)
To: Wu, Jingjing, Richardson, Bruce; +Cc: dev
> -----Original Message-----
> From: Wu, Jingjing
> Sent: Friday, February 26, 2016 2:52 PM
> To: Richardson, Bruce
> Cc: dev@dpdk.org; Wu, Jingjing; Zhang, Helin; Tao, Zhe
> Subject: [PATCH v3 1/2] i40evf: allocate virtchnl cmd buffer for each vf
>
> Currently, i40evf PMD uses a global static buffer to send virtchnl command to
> host driver. It is shared by multi VFs.
> This patch changed to allocate virtchnl cmd buffer for each VF.
>
> Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
^ permalink raw reply [flat|nested] 42+ messages in thread
* [dpdk-dev] [PATCH v3 2/2] i40evf: support to report pf reset event
2016-02-26 6:51 ` [dpdk-dev] [PATCH v3 0/2] i40evf: pf reset event report Jingjing Wu
2016-02-26 6:51 ` [dpdk-dev] [PATCH v3 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
@ 2016-02-26 6:51 ` Jingjing Wu
2016-02-26 8:13 ` Zhang, Helin
2016-03-08 17:44 ` [dpdk-dev] [PATCH v3 0/2] i40evf: pf reset event report Bruce Richardson
` (2 subsequent siblings)
4 siblings, 1 reply; 42+ messages in thread
From: Jingjing Wu @ 2016-02-26 6:51 UTC (permalink / raw)
To: bruce.richardson; +Cc: dev
When Linux PF and DPDK VF are used for i40e PMD, In case of PF reset,
interrupt will go via adminq event, VF need be informed the event,
a callback mechanism is introduced by VF. This will allow VF to
invoke callback when reset happens.
Users can register a callback for this interrupt event like:
rte_eth_dev_callback_register(portid,
RTE_ETH_EVENT_INTR_RESET,
reset_event_callback,
arg);
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
---
doc/guides/rel_notes/release_16_04.rst | 1 +
drivers/net/i40e/i40e_ethdev_vf.c | 272 +++++++++++++++++++++++++++++----
lib/librte_ether/rte_ethdev.h | 1 +
3 files changed, 245 insertions(+), 29 deletions(-)
diff --git a/doc/guides/rel_notes/release_16_04.rst b/doc/guides/rel_notes/release_16_04.rst
index 3036f7d..596b6e2 100644
--- a/doc/guides/rel_notes/release_16_04.rst
+++ b/doc/guides/rel_notes/release_16_04.rst
@@ -70,6 +70,7 @@ This section should contain new features added in this release. Sample format:
* **szedata2: Add functions for setting link up/down.**
+* **Added pf reset event reported in i40e vf PMD driver.
Resolved Issues
---------------
diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
index 4b15ed6..b6e360b 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -74,8 +74,6 @@
#define I40EVF_BUSY_WAIT_DELAY 10
#define I40EVF_BUSY_WAIT_COUNT 50
#define MAX_RESET_WAIT_CNT 20
-/*ITR index for NOITR*/
-#define I40E_QINT_RQCTL_MSIX_INDX_NOITR 3
struct i40evf_arq_msg_info {
enum i40e_virtchnl_ops ops;
@@ -151,6 +149,9 @@ static int
i40evf_dev_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id);
static int
i40evf_dev_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id);
+static void i40evf_handle_pf_event(__rte_unused struct rte_eth_dev *dev,
+ uint8_t *msg,
+ uint16_t msglen);
/* Default hash key buffer for RSS */
static uint32_t rss_key_default[I40E_VFQF_HKEY_MAX_INDEX + 1];
@@ -355,19 +356,40 @@ i40evf_execute_vf_cmd(struct rte_eth_dev *dev, struct vf_cmd_info *args)
return err;
}
- do {
- ret = i40evf_read_pfmsg(dev, &info);
- if (ret == I40EVF_MSG_CMD) {
- err = 0;
- break;
- } else if (ret == I40EVF_MSG_ERR) {
- err = -1;
- break;
- }
- rte_delay_ms(ASQ_DELAY_MS);
- /* If don't read msg or read sys event, continue */
- } while (i++ < MAX_TRY_TIMES);
- _clear_cmd(vf);
+ switch (args->ops) {
+ case I40E_VIRTCHNL_OP_RESET_VF:
+ /*no need to process in this function */
+ break;
+ case I40E_VIRTCHNL_OP_VERSION:
+ case I40E_VIRTCHNL_OP_GET_VF_RESOURCES:
+ /* for init adminq commands, need to poll the response */
+ do {
+ ret = i40evf_read_pfmsg(dev, &info);
+ if (ret == I40EVF_MSG_CMD) {
+ err = 0;
+ break;
+ } else if (ret == I40EVF_MSG_ERR) {
+ err = -1;
+ break;
+ }
+ rte_delay_ms(ASQ_DELAY_MS);
+ /* If don't read msg or read sys event, continue */
+ } while (i++ < MAX_TRY_TIMES);
+ _clear_cmd(vf);
+ break;
+
+ default:
+ /* for other adminq in running time, waiting the cmd done flag */
+ do {
+ if (vf->pend_cmd == I40E_VIRTCHNL_OP_UNKNOWN) {
+ err = 0;
+ break;
+ }
+ rte_delay_ms(ASQ_DELAY_MS);
+ /* If don't read msg or read sys event, continue */
+ } while (i++ < MAX_TRY_TIMES);
+ break;
+ }
return err | vf->cmd_retval;
}
@@ -716,7 +738,7 @@ i40evf_config_irq_map(struct rte_eth_dev *dev)
map_info = (struct i40e_virtchnl_irq_map_info *)cmd_buffer;
map_info->num_vectors = 1;
- map_info->vecmap[0].rxitr_idx = I40E_QINT_RQCTL_MSIX_INDX_NOITR;
+ map_info->vecmap[0].rxitr_idx = I40E_ITR_INDEX_DEFAULT;
map_info->vecmap[0].vsi_id = vf->vsi_res->vsi_id;
/* Alway use default dynamic MSIX interrupt */
map_info->vecmap[0].vector_id = vector_id;
@@ -1090,6 +1112,38 @@ i40evf_dev_atomic_write_link_status(struct rte_eth_dev *dev,
return 0;
}
+/* Disable IRQ0 */
+static inline void
+i40evf_disable_irq0(struct i40e_hw *hw)
+{
+ /* Disable all interrupt types */
+ I40E_WRITE_REG(hw, I40E_VFINT_ICR0_ENA1, 0);
+ I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
+ I40E_VFINT_DYN_CTL01_ITR_INDX_MASK);
+ I40EVF_WRITE_FLUSH(hw);
+}
+
+/* Enable IRQ0 */
+static inline void
+i40evf_enable_irq0(struct i40e_hw *hw)
+{
+ /* Enable admin queue interrupt trigger */
+ uint32_t val;
+
+ i40evf_disable_irq0(hw);
+ val = I40E_READ_REG(hw, I40E_VFINT_ICR0_ENA1);
+ val |= I40E_VFINT_ICR0_ENA1_ADMINQ_MASK |
+ I40E_VFINT_ICR0_ENA1_LINK_STAT_CHANGE_MASK;
+ I40E_WRITE_REG(hw, I40E_VFINT_ICR0_ENA1, val);
+
+ I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
+ I40E_VFINT_DYN_CTL01_INTENA_MASK |
+ I40E_VFINT_DYN_CTL01_CLEARPBA_MASK |
+ I40E_VFINT_DYN_CTL01_ITR_INDX_MASK);
+
+ I40EVF_WRITE_FLUSH(hw);
+}
+
static int
i40evf_reset_vf(struct i40e_hw *hw)
{
@@ -1134,6 +1188,8 @@ i40evf_init_vf(struct rte_eth_dev *dev)
int i, err, bufsz;
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
+ uint16_t interval =
+ i40e_calc_itr_interval(I40E_QUEUE_ITR_INTERVAL_MAX);
vf->adapter = I40E_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
vf->dev_data = dev->data;
@@ -1215,6 +1271,16 @@ i40evf_init_vf(struct rte_eth_dev *dev)
ether_addr_copy((struct ether_addr *)vf->vsi_res->default_mac_addr,
(struct ether_addr *)hw->mac.addr);
+ /* If the PF host is not DPDK, set the interval of ITR0 to max*/
+ if (vf->version_major != I40E_DPDK_VERSION_MAJOR) {
+ I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
+ (I40E_ITR_INDEX_DEFAULT <<
+ I40E_VFINT_DYN_CTL0_ITR_INDX_SHIFT) |
+ (interval <<
+ I40E_VFINT_DYN_CTL0_INTERVAL_SHIFT));
+ I40EVF_WRITE_FLUSH(hw);
+ }
+
return 0;
err_alloc:
@@ -1243,11 +1309,142 @@ i40evf_uninit_vf(struct rte_eth_dev *dev)
return 0;
}
+static void
+i40evf_handle_pf_event(__rte_unused struct rte_eth_dev *dev,
+ uint8_t *msg,
+ __rte_unused uint16_t msglen)
+{
+ struct i40e_virtchnl_pf_event *pf_msg =
+ (struct i40e_virtchnl_pf_event *)msg;
+
+ switch (pf_msg->event) {
+ case I40E_VIRTCHNL_EVENT_RESET_IMPENDING:
+ PMD_DRV_LOG(DEBUG, "VIRTCHNL_EVENT_RESET_IMPENDING event\n");
+ _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_RESET);
+ break;
+ case I40E_VIRTCHNL_EVENT_LINK_CHANGE:
+ PMD_DRV_LOG(DEBUG, "VIRTCHNL_EVENT_LINK_CHANGE event\n");
+ break;
+ case I40E_VIRTCHNL_EVENT_PF_DRIVER_CLOSE:
+ PMD_DRV_LOG(DEBUG, "VIRTCHNL_EVENT_PF_DRIVER_CLOSE event\n");
+ break;
+ default:
+ PMD_DRV_LOG(ERR, " unknown event received %u", pf_msg->event);
+ break;
+ }
+}
+
+static void
+i40evf_handle_aq_msg(struct rte_eth_dev *dev)
+{
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
+ struct i40e_arq_event_info info;
+ struct i40e_virtchnl_msg *v_msg;
+ uint16_t pending, opcode;
+ int ret;
+
+ info.buf_len = I40E_AQ_BUF_SZ;
+ if (!vf->aq_resp) {
+ PMD_DRV_LOG(ERR, "Buffer for adminq resp should not be NULL");
+ return;
+ }
+ info.msg_buf = vf->aq_resp;
+ v_msg = (struct i40e_virtchnl_msg *)&info.desc;
+
+ pending = 1;
+ while (pending) {
+ ret = i40e_clean_arq_element(hw, &info, &pending);
+
+ if (ret != I40E_SUCCESS) {
+ PMD_DRV_LOG(INFO, "Failed to read msg from AdminQ,"
+ "ret: %d", ret);
+ break;
+ }
+ opcode = rte_le_to_cpu_16(info.desc.opcode);
+
+ switch (opcode) {
+ case i40e_aqc_opc_send_msg_to_vf:
+ if (v_msg->v_opcode == I40E_VIRTCHNL_OP_EVENT)
+ /* process event*/
+ i40evf_handle_pf_event(dev, info.msg_buf,
+ info.msg_len);
+ else {
+ /* read message and it's expected one */
+ if (v_msg->v_opcode == vf->pend_cmd) {
+ vf->cmd_retval = v_msg->v_retval;
+ /* prevent compiler reordering */
+ rte_compiler_barrier();
+ _clear_cmd(vf);
+ } else
+ PMD_DRV_LOG(ERR, "command mismatch,"
+ "expect %u, get %u",
+ vf->pend_cmd, v_msg->v_opcode);
+ PMD_DRV_LOG(DEBUG, "adminq response is received,"
+ " opcode = %d\n", v_msg->v_opcode);
+ }
+ break;
+ default:
+ PMD_DRV_LOG(ERR, "Request %u is not supported yet",
+ opcode);
+ break;
+ }
+ }
+}
+
+/**
+ * Interrupt handler triggered by NIC for handling
+ * specific interrupt. Only adminq interrupt is processed in VF.
+ *
+ * @param handle
+ * Pointer to interrupt handle.
+ * @param param
+ * The address of parameter (struct rte_eth_dev *) regsitered before.
+ *
+ * @return
+ * void
+ */
+static void
+i40evf_dev_interrupt_handler(__rte_unused struct rte_intr_handle *handle,
+ void *param)
+{
+ struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint32_t icr0;
+
+ i40evf_disable_irq0(hw);
+
+ /* read out interrupt causes */
+ icr0 = I40E_READ_REG(hw, I40E_VFINT_ICR01);
+
+ /* No interrupt event indicated */
+ if (!(icr0 & I40E_VFINT_ICR01_INTEVENT_MASK)) {
+ PMD_DRV_LOG(DEBUG, "No interrupt event, nothing to do\n");
+ goto done;
+ }
+
+ if (icr0 & I40E_VFINT_ICR01_ADMINQ_MASK) {
+ PMD_DRV_LOG(DEBUG, "ICR01_ADMINQ is reported\n");
+ i40evf_handle_aq_msg(dev);
+ }
+
+ /* Link Status Change interrupt */
+ if (icr0 & I40E_VFINT_ICR01_LINK_STAT_CHANGE_MASK)
+ PMD_DRV_LOG(DEBUG, "LINK_STAT_CHANGE is reported,"
+ " do nothing\n");
+
+done:
+ i40evf_enable_irq0(hw);
+ rte_intr_enable(&(dev->pci_dev->intr_handle));
+}
+
+
static int
i40evf_dev_init(struct rte_eth_dev *eth_dev)
{
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(\
eth_dev->data->dev_private);
+ struct rte_pci_device *pci_dev = eth_dev->pci_dev;
PMD_INIT_FUNC_TRACE();
@@ -1282,6 +1479,16 @@ i40evf_dev_init(struct rte_eth_dev *eth_dev)
return -1;
}
+ /* register callback func to eal lib */
+ rte_intr_callback_register(&(pci_dev->intr_handle),
+ i40evf_dev_interrupt_handler, (void *)eth_dev);
+
+ /* enable uio intr after callback register */
+ rte_intr_enable(&(pci_dev->intr_handle));
+
+ /* configure and enable device interrupt */
+ i40evf_enable_irq0(hw);
+
/* copy mac addr */
eth_dev->data->mac_addrs = rte_zmalloc("i40evf_mac",
ETHER_ADDR_LEN, 0);
@@ -1659,7 +1866,8 @@ i40evf_enable_queues_intr(struct rte_eth_dev *dev)
I40E_WRITE_REG(hw,
I40E_VFINT_DYN_CTL01,
I40E_VFINT_DYN_CTL01_INTENA_MASK |
- I40E_VFINT_DYN_CTL01_CLEARPBA_MASK);
+ I40E_VFINT_DYN_CTL01_CLEARPBA_MASK |
+ I40E_VFINT_DYN_CTL01_ITR_INDX_MASK);
I40EVF_WRITE_FLUSH(hw);
return;
}
@@ -1670,11 +1878,10 @@ i40evf_enable_queues_intr(struct rte_eth_dev *dev)
I40E_VFINT_DYN_CTLN1(I40EVF_VSI_DEFAULT_MSIX_INTR - 1),
I40E_VFINT_DYN_CTLN1_INTENA_MASK |
I40E_VFINT_DYN_CTLN_CLEARPBA_MASK);
- else
- /* To support Linux PF host */
- I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
- I40E_VFINT_DYN_CTL01_INTENA_MASK |
- I40E_VFINT_DYN_CTL01_CLEARPBA_MASK);
+ /* If host driver is kernel driver, do nothing.
+ * Interrupt 0 is used for rx packets, but don't set I40E_VFINT_DYN_CTL01,
+ * because it is already done in i40evf_enable_irq0.
+ */
I40EVF_WRITE_FLUSH(hw);
}
@@ -1687,7 +1894,8 @@ i40evf_disable_queues_intr(struct rte_eth_dev *dev)
struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
if (!rte_intr_allow_others(intr_handle)) {
- I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01, 0);
+ I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
+ I40E_VFINT_DYN_CTL01_ITR_INDX_MASK);
I40EVF_WRITE_FLUSH(hw);
return;
}
@@ -1697,8 +1905,10 @@ i40evf_disable_queues_intr(struct rte_eth_dev *dev)
I40E_VFINT_DYN_CTLN1(I40EVF_VSI_DEFAULT_MSIX_INTR
- 1),
0);
- else
- I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01, 0);
+ /* If host driver is kernel driver, do nothing.
+ * Interrupt 0 is used for rx packets, but don't zero I40E_VFINT_DYN_CTL01,
+ * because interrupt 0 is also used for adminq processing.
+ */
I40EVF_WRITE_FLUSH(hw);
}
@@ -1822,10 +2032,6 @@ i40evf_dev_start(struct rte_eth_dev *dev)
goto err_mac;
}
- /* vf don't allow intr except for rxq intr */
- if (dev->data->dev_conf.intr_conf.rxq != 0)
- rte_intr_enable(intr_handle);
-
i40evf_enable_queues_intr(dev);
return 0;
@@ -2017,12 +2223,20 @@ static void
i40evf_dev_close(struct rte_eth_dev *dev)
{
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct rte_pci_device *pci_dev = dev->pci_dev;
i40evf_dev_stop(dev);
hw->adapter_stopped = 1;
i40e_dev_free_queues(dev);
i40evf_reset_vf(hw);
i40e_shutdown_adminq(hw);
+ /* disable uio intr before callback unregister */
+ rte_intr_disable(&(pci_dev->intr_handle));
+
+ /* unregister callback func from eal lib */
+ rte_intr_callback_unregister(&(pci_dev->intr_handle),
+ i40evf_dev_interrupt_handler, (void *)dev);
+ i40evf_disable_irq0(hw);
}
static int
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 16da821..cdff3b7 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -2661,6 +2661,7 @@ rte_eth_tx_burst(uint8_t port_id, uint16_t queue_id,
enum rte_eth_event_type {
RTE_ETH_EVENT_UNKNOWN, /**< unknown event type */
RTE_ETH_EVENT_INTR_LSC, /**< lsc interrupt event */
+ RTE_ETH_EVENT_INTR_RESET, /**< reset interrupt event */
RTE_ETH_EVENT_MAX /**< max value of this enum */
};
--
2.4.0
^ permalink raw reply [flat|nested] 42+ messages in thread* Re: [dpdk-dev] [PATCH v3 2/2] i40evf: support to report pf reset event
2016-02-26 6:51 ` [dpdk-dev] [PATCH v3 2/2] i40evf: support to report pf reset event Jingjing Wu
@ 2016-02-26 8:13 ` Zhang, Helin
0 siblings, 0 replies; 42+ messages in thread
From: Zhang, Helin @ 2016-02-26 8:13 UTC (permalink / raw)
To: Wu, Jingjing, Richardson, Bruce; +Cc: dev
> -----Original Message-----
> From: Wu, Jingjing
> Sent: Friday, February 26, 2016 2:52 PM
> To: Richardson, Bruce
> Cc: dev@dpdk.org; Wu, Jingjing; Zhang, Helin; Tao, Zhe
> Subject: [PATCH v3 2/2] i40evf: support to report pf reset event
>
> When Linux PF and DPDK VF are used for i40e PMD, In case of PF reset,
> interrupt will go via adminq event, VF need be informed the event, a callback
> mechanism is introduced by VF. This will allow VF to invoke callback when reset
> happens.
> Users can register a callback for this interrupt event like:
> rte_eth_dev_callback_register(portid,
> RTE_ETH_EVENT_INTR_RESET,
> reset_event_callback,
> arg);
>
> Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [dpdk-dev] [PATCH v3 0/2] i40evf: pf reset event report
2016-02-26 6:51 ` [dpdk-dev] [PATCH v3 0/2] i40evf: pf reset event report Jingjing Wu
2016-02-26 6:51 ` [dpdk-dev] [PATCH v3 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
2016-02-26 6:51 ` [dpdk-dev] [PATCH v3 2/2] i40evf: support to report pf reset event Jingjing Wu
@ 2016-03-08 17:44 ` Bruce Richardson
2016-03-09 3:08 ` Zhe Tao
2016-03-09 6:00 ` [dpdk-dev] [PATCH v4 " Jingjing Wu
4 siblings, 0 replies; 42+ messages in thread
From: Bruce Richardson @ 2016-03-08 17:44 UTC (permalink / raw)
To: Jingjing Wu; +Cc: dev
On Fri, Feb 26, 2016 at 02:51:52PM +0800, Jingjing Wu wrote:
> v3 changes:
> - commit log doc rewording.
> - rebase on latest dpdk-next-net/rel_16_04 branch.
> - remove few useless line
> - adjust interval and increase times for waiting pf msg
>
> v2 changes:
> - remove the change on vf reset status checking
> - add pf event report support in release note
>
> When Linux PF and DPDK VF are used for i40e PMD, In case of PF reset,
> interrupt request will go via adminq event, VF need be informed, a callback
> mechanism is introduced by VF. This will allow VF to invoke callback when
> reset happens.
> Users can register a callback for this interrupt event like:
> rte_eth_dev_callback_register(portid,
> RTE_ETH_EVENT_INTR_RESET,
> reset_event_callback,
> arg);
>
> Jingjing Wu (2):
> i40evf: allocate virtchnl cmd buffer for each vf
> i40evf: support to report pf reset event
>
> doc/guides/rel_notes/release_16_04.rst | 1 +
> drivers/net/i40e/i40e_ethdev.h | 2 +
> drivers/net/i40e/i40e_ethdev_vf.c | 420 +++++++++++++++++++++++----------
> lib/librte_ether/rte_ethdev.h | 1 +
> 4 files changed, 301 insertions(+), 123 deletions(-)
Hi Jingjing,
I'm planning on merging this patch set into dpdk-next-net, but it doesn't apply
cleanly. Can you perhaps rebase it on top of dpdk-next-net/rel_16_04 branch, and
do a V4 keeping Helin's ack on each patch.
Thanks,
/Bruce
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [dpdk-dev] [PATCH v3 0/2] i40evf: pf reset event report
2016-02-26 6:51 ` [dpdk-dev] [PATCH v3 0/2] i40evf: pf reset event report Jingjing Wu
` (2 preceding siblings ...)
2016-03-08 17:44 ` [dpdk-dev] [PATCH v3 0/2] i40evf: pf reset event report Bruce Richardson
@ 2016-03-09 3:08 ` Zhe Tao
2016-03-09 6:00 ` [dpdk-dev] [PATCH v4 " Jingjing Wu
4 siblings, 0 replies; 42+ messages in thread
From: Zhe Tao @ 2016-03-09 3:08 UTC (permalink / raw)
To: Jingjing Wu; +Cc: dev
On Fri, Feb 26, 2016 at 02:51:52PM +0800, Jingjing Wu wrote:
> v3 changes:
> - commit log doc rewording.
> - rebase on latest dpdk-next-net/rel_16_04 branch.
> - remove few useless line
> - adjust interval and increase times for waiting pf msg
>
> v2 changes:
> - remove the change on vf reset status checking
> - add pf event report support in release note
>
> When Linux PF and DPDK VF are used for i40e PMD, In case of PF reset,
> interrupt request will go via adminq event, VF need be informed, a callback
> mechanism is introduced by VF. This will allow VF to invoke callback when
> reset happens.
> Users can register a callback for this interrupt event like:
> rte_eth_dev_callback_register(portid,
> RTE_ETH_EVENT_INTR_RESET,
> reset_event_callback,
> arg);
>
> Jingjing Wu (2):
> i40evf: allocate virtchnl cmd buffer for each vf
> i40evf: support to report pf reset event
>
> doc/guides/rel_notes/release_16_04.rst | 1 +
> drivers/net/i40e/i40e_ethdev.h | 2 +
> drivers/net/i40e/i40e_ethdev_vf.c | 420 +++++++++++++++++++++++----------
> lib/librte_ether/rte_ethdev.h | 1 +
> 4 files changed, 301 insertions(+), 123 deletions(-)
>
> --
> 2.4.0
Acked-by: Zhe Tao <zhe.tao@intel.com>
^ permalink raw reply [flat|nested] 42+ messages in thread* [dpdk-dev] [PATCH v4 0/2] i40evf: pf reset event report
2016-02-26 6:51 ` [dpdk-dev] [PATCH v3 0/2] i40evf: pf reset event report Jingjing Wu
` (3 preceding siblings ...)
2016-03-09 3:08 ` Zhe Tao
@ 2016-03-09 6:00 ` Jingjing Wu
2016-03-09 6:00 ` [dpdk-dev] [PATCH v4 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
` (2 more replies)
4 siblings, 3 replies; 42+ messages in thread
From: Jingjing Wu @ 2016-03-09 6:00 UTC (permalink / raw)
To: bruce.richardson; +Cc: dev
v4 changes:
- rebase on latest dpdk-next-net/rel_16_04 branch (commit 0f9564a0e4f2)
v3 changes:
- commit log doc rewording.
- rebase on latest dpdk-next-net/rel_16_04 branch.
- remove few useless line.
- adjust interval and increase times for waiting pf msg
v2 changes:
- remove the change on vf reset status checking
- add pf event report support in release note
When Linux PF and DPDK VF are used for i40e PMD, In case of PF reset,
interrupt request will go via adminq event, VF need be informed, a
callback mechanism is introduced by VF. This will allow VF to invoke
callback when reset happens.
Users can register a callback for this interrupt event like:
rte_eth_dev_callback_register(portid,
RTE_ETH_EVENT_INTR_RESET,
reset_event_callback,
arg);
Jingjing Wu (2):
i40evf: allocate virtchnl cmd buffer for each vf
i40evf: support to report pf reset event
doc/guides/rel_notes/release_16_04.rst | 2 +
drivers/net/i40e/i40e_ethdev.h | 2 +
drivers/net/i40e/i40e_ethdev_vf.c | 420 +++++++++++++++++++++++----------
lib/librte_ether/rte_ethdev.h | 1 +
4 files changed, 302 insertions(+), 123 deletions(-)
--
2.4.0
^ permalink raw reply [flat|nested] 42+ messages in thread* [dpdk-dev] [PATCH v4 1/2] i40evf: allocate virtchnl cmd buffer for each vf
2016-03-09 6:00 ` [dpdk-dev] [PATCH v4 " Jingjing Wu
@ 2016-03-09 6:00 ` Jingjing Wu
2016-03-09 6:00 ` [dpdk-dev] [PATCH v4 2/2] i40evf: support to report pf reset event Jingjing Wu
2016-03-10 3:41 ` [dpdk-dev] [PATCH v5 0/2] i40evf: pf reset event report Jingjing Wu
2 siblings, 0 replies; 42+ messages in thread
From: Jingjing Wu @ 2016-03-09 6:00 UTC (permalink / raw)
To: bruce.richardson; +Cc: dev
Currently, i40evf PMD uses a global static buffer to send virtchnl
command to host driver. It is shared by multi VFs.
This patch changed to allocate virtchnl cmd buffer for each VF.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
---
drivers/net/i40e/i40e_ethdev.h | 2 +
drivers/net/i40e/i40e_ethdev_vf.c | 178 +++++++++++++++-----------------------
2 files changed, 71 insertions(+), 109 deletions(-)
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index a9b805e..8cd6126 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -497,7 +497,9 @@ struct i40e_vf {
bool link_up;
bool vf_reset;
volatile uint32_t pend_cmd; /* pending command not finished yet */
+ uint32_t cmd_retval; /* return value of the cmd response from PF */
u16 pend_msg; /* flags indicates events from pf not handled yet */
+ uint8_t *aq_resp; /* buffer to store the adminq response from PF */
/* VSI info */
struct i40e_virtchnl_vf_resource *vf_res; /* All VSIs */
diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
index 6185ee8..90edeb5 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -103,9 +103,6 @@ enum i40evf_aq_result {
I40EVF_MSG_CMD, /* Read async command result */
};
-/* A share buffer to store the command result from PF driver */
-static uint8_t cmd_result_buffer[I40E_AQ_BUF_SZ];
-
static int i40evf_dev_configure(struct rte_eth_dev *dev);
static int i40evf_dev_start(struct rte_eth_dev *dev);
static void i40evf_dev_stop(struct rte_eth_dev *dev);
@@ -217,31 +214,37 @@ static const struct eth_dev_ops i40evf_eth_dev_ops = {
};
/*
- * Parse admin queue message.
- *
- * return value:
- * < 0: meet error
- * 0: read sys msg
- * > 0: read cmd result
+ * Read data in admin queue to get msg from pf driver
*/
static enum i40evf_aq_result
-i40evf_parse_pfmsg(struct i40e_vf *vf,
- struct i40e_arq_event_info *event,
- struct i40evf_arq_msg_info *data)
+i40evf_read_pfmsg(struct rte_eth_dev *dev, struct i40evf_arq_msg_info *data)
{
- enum i40e_virtchnl_ops opcode = (enum i40e_virtchnl_ops)\
- rte_le_to_cpu_32(event->desc.cookie_high);
- enum i40e_status_code retval = (enum i40e_status_code)\
- rte_le_to_cpu_32(event->desc.cookie_low);
- enum i40evf_aq_result ret = I40EVF_MSG_CMD;
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
+ struct i40e_arq_event_info event;
+ enum i40e_virtchnl_ops opcode;
+ enum i40e_status_code retval;
+ int ret;
+ enum i40evf_aq_result result = I40EVF_MSG_NON;
+
+ event.buf_len = data->buf_len;
+ event.msg_buf = data->msg;
+ ret = i40e_clean_arq_element(hw, &event, NULL);
+ /* Can't read any msg from adminQ */
+ if (ret) {
+ if (ret != I40E_ERR_ADMIN_QUEUE_NO_WORK)
+ result = I40EVF_MSG_ERR;
+ return result;
+ }
+ opcode = (enum i40e_virtchnl_ops)rte_le_to_cpu_32(event.desc.cookie_high);
+ retval = (enum i40e_status_code)rte_le_to_cpu_32(event.desc.cookie_low);
/* pf sys event */
if (opcode == I40E_VIRTCHNL_OP_EVENT) {
struct i40e_virtchnl_pf_event *vpe =
- (struct i40e_virtchnl_pf_event *)event->msg_buf;
+ (struct i40e_virtchnl_pf_event *)event.msg_buf;
- /* Initialize ret to sys event */
- ret = I40EVF_MSG_SYS;
+ result = I40EVF_MSG_SYS;
switch (vpe->event) {
case I40E_VIRTCHNL_EVENT_LINK_CHANGE:
vf->link_up =
@@ -266,74 +269,17 @@ i40evf_parse_pfmsg(struct i40e_vf *vf,
}
} else {
/* async reply msg on command issued by vf previously */
- ret = I40EVF_MSG_CMD;
+ result = I40EVF_MSG_CMD;
/* Actual data length read from PF */
- data->msg_len = event->msg_len;
+ data->msg_len = event.msg_len;
}
- /* fill the ops and result to notify VF */
+
data->result = retval;
data->ops = opcode;
- return ret;
-}
-
-/*
- * Read data in admin queue to get msg from pf driver
- */
-static enum i40evf_aq_result
-i40evf_read_pfmsg(struct rte_eth_dev *dev, struct i40evf_arq_msg_info *data)
-{
- struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
- struct i40e_arq_event_info event;
- int ret;
- enum i40evf_aq_result result = I40EVF_MSG_NON;
-
- event.buf_len = data->buf_len;
- event.msg_buf = data->msg;
- ret = i40e_clean_arq_element(hw, &event, NULL);
- /* Can't read any msg from adminQ */
- if (ret) {
- if (ret == I40E_ERR_ADMIN_QUEUE_NO_WORK)
- result = I40EVF_MSG_NON;
- else
- result = I40EVF_MSG_ERR;
- return result;
- }
-
- /* Parse the event */
- result = i40evf_parse_pfmsg(vf, &event, data);
-
return result;
}
-/*
- * Polling read until command result return from pf driver or meet error.
- */
-static int
-i40evf_wait_cmd_done(struct rte_eth_dev *dev,
- struct i40evf_arq_msg_info *data)
-{
- int i = 0;
- enum i40evf_aq_result ret;
-
-#define MAX_TRY_TIMES 20
-#define ASQ_DELAY_MS 100
- do {
- /* Delay some time first */
- rte_delay_ms(ASQ_DELAY_MS);
- ret = i40evf_read_pfmsg(dev, data);
- if (ret == I40EVF_MSG_CMD)
- return 0;
- else if (ret == I40EVF_MSG_ERR)
- return -1;
-
- /* If don't read msg or read sys event, continue */
- } while(i++ < MAX_TRY_TIMES);
-
- return -1;
-}
-
/**
* clear current command. Only call in case execute
* _atomic_set_cmd successfully.
@@ -360,13 +306,18 @@ _atomic_set_cmd(struct i40e_vf *vf, enum i40e_virtchnl_ops ops)
return !ret;
}
+#define MAX_TRY_TIMES 200
+#define ASQ_DELAY_MS 10
+
static int
i40evf_execute_vf_cmd(struct rte_eth_dev *dev, struct vf_cmd_info *args)
{
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
- int err = -1;
struct i40evf_arq_msg_info info;
+ enum i40evf_aq_result ret;
+ int err = -1;
+ int i = 0;
if (_atomic_set_cmd(vf, args->ops))
return -1;
@@ -384,19 +335,21 @@ i40evf_execute_vf_cmd(struct rte_eth_dev *dev, struct vf_cmd_info *args)
return err;
}
- err = i40evf_wait_cmd_done(dev, &info);
- /* read message and it's expected one */
- if (!err && args->ops == info.ops)
- _clear_cmd(vf);
- else if (err) {
- PMD_DRV_LOG(ERR, "Failed to read message from AdminQ");
- _clear_cmd(vf);
- }
- else if (args->ops != info.ops)
- PMD_DRV_LOG(ERR, "command mismatch, expect %u, get %u",
- args->ops, info.ops);
+ do {
+ ret = i40evf_read_pfmsg(dev, &info);
+ if (ret == I40EVF_MSG_CMD) {
+ err = 0;
+ break;
+ } else if (ret == I40EVF_MSG_ERR) {
+ err = -1;
+ break;
+ }
+ rte_delay_ms(ASQ_DELAY_MS);
+ /* If don't read msg or read sys event, continue */
+ } while (i++ < MAX_TRY_TIMES);
+ _clear_cmd(vf);
- return err | info.result;
+ return err | vf->cmd_retval;
}
/*
@@ -416,7 +369,7 @@ i40evf_check_api_version(struct rte_eth_dev *dev)
args.ops = I40E_VIRTCHNL_OP_VERSION;
args.in_args = (uint8_t *)&version;
args.in_args_size = sizeof(version);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -454,7 +407,7 @@ i40evf_get_vf_resource(struct rte_eth_dev *dev)
uint32_t caps, len;
args.ops = I40E_VIRTCHNL_OP_GET_VF_RESOURCES;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
if (PF_IS_V11(vf)) {
caps = I40E_VIRTCHNL_VF_OFFLOAD_L2 |
@@ -507,7 +460,7 @@ i40evf_config_promisc(struct rte_eth_dev *dev,
args.ops = I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE;
args.in_args = (uint8_t *)&promisc;
args.in_args_size = sizeof(promisc);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -534,7 +487,7 @@ i40evf_config_vlan_offload(struct rte_eth_dev *dev,
args.ops = (enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_CFG_VLAN_OFFLOAD;
args.in_args = (uint8_t *)&offload;
args.in_args_size = sizeof(offload);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -565,7 +518,7 @@ i40evf_config_vlan_pvid(struct rte_eth_dev *dev,
args.ops = (enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_CFG_VLAN_PVID;
args.in_args = (uint8_t *)&tpid_info;
args.in_args_size = sizeof(tpid_info);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -644,7 +597,7 @@ i40evf_configure_vsi_queues(struct rte_eth_dev *dev)
args.ops = I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES;
args.in_args = (uint8_t *)vc_vqci;
args.in_args_size = size;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
ret = i40evf_execute_vf_cmd(dev, &args);
if (ret)
@@ -697,7 +650,7 @@ i40evf_configure_vsi_queues_ext(struct rte_eth_dev *dev)
(enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES_EXT;
args.in_args = (uint8_t *)vc_vqcei;
args.in_args_size = size;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
ret = i40evf_execute_vf_cmd(dev, &args);
if (ret)
@@ -759,7 +712,7 @@ i40evf_config_irq_map(struct rte_eth_dev *dev)
args.ops = I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP;
args.in_args = (u8 *)cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -790,7 +743,7 @@ i40evf_switch_queue(struct rte_eth_dev *dev, bool isrx, uint16_t qid,
args.ops = I40E_VIRTCHNL_OP_DISABLE_QUEUES;
args.in_args = (u8 *)&queue_select;
args.in_args_size = sizeof(queue_select);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -882,7 +835,7 @@ i40evf_add_mac_addr(struct rte_eth_dev *dev, struct ether_addr *addr)
args.ops = I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS;
args.in_args = cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -919,7 +872,7 @@ i40evf_del_mac_addr(struct rte_eth_dev *dev, struct ether_addr *addr)
args.ops = I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS;
args.in_args = cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -942,7 +895,7 @@ i40evf_update_stats(struct rte_eth_dev *dev, struct i40e_eth_stats **pstats)
args.ops = I40E_VIRTCHNL_OP_GET_STATS;
args.in_args = (u8 *)&q_stats;
args.in_args_size = sizeof(q_stats);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -1036,7 +989,7 @@ i40evf_add_vlan(struct rte_eth_dev *dev, uint16_t vlanid)
args.ops = I40E_VIRTCHNL_OP_ADD_VLAN;
args.in_args = (u8 *)&cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -1063,7 +1016,7 @@ i40evf_del_vlan(struct rte_eth_dev *dev, uint16_t vlanid)
args.ops = I40E_VIRTCHNL_OP_DEL_VLAN;
args.in_args = (u8 *)&cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -1075,6 +1028,7 @@ i40evf_del_vlan(struct rte_eth_dev *dev, uint16_t vlanid)
static int
i40evf_get_link_status(struct rte_eth_dev *dev, struct rte_eth_link *link)
{
+ struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
int err;
struct vf_cmd_info args;
struct rte_eth_link *new_link;
@@ -1082,7 +1036,7 @@ i40evf_get_link_status(struct rte_eth_dev *dev, struct rte_eth_link *link)
args.ops = (enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_GET_LINK_STAT;
args.in_args = NULL;
args.in_args_size = 0;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err) {
@@ -1177,7 +1131,6 @@ i40evf_init_vf(struct rte_eth_dev *dev)
goto err;
}
-
/* Reset VF and wait until it's complete */
if (i40evf_reset_vf(hw)) {
PMD_INIT_LOG(ERR, "reset NIC failed");
@@ -1195,6 +1148,11 @@ i40evf_init_vf(struct rte_eth_dev *dev)
PMD_INIT_LOG(ERR, "init_adminq failed");
return -1;
}
+ vf->aq_resp = rte_zmalloc("vf_aq_resp", I40E_AQ_BUF_SZ, 0);
+ if (!vf->aq_resp) {
+ PMD_INIT_LOG(ERR, "unable to allocate vf_aq_resp memory");
+ goto err_aq;
+ }
if (i40evf_check_api_version(dev) != 0) {
PMD_INIT_LOG(ERR, "check_api version failed");
goto err_aq;
@@ -1259,6 +1217,8 @@ i40evf_uninit_vf(struct rte_eth_dev *dev)
i40evf_dev_close(dev);
rte_free(vf->vf_res);
vf->vf_res = NULL;
+ rte_free(vf->aq_resp);
+ vf->aq_resp = NULL;
return 0;
}
--
2.4.0
^ permalink raw reply [flat|nested] 42+ messages in thread* [dpdk-dev] [PATCH v4 2/2] i40evf: support to report pf reset event
2016-03-09 6:00 ` [dpdk-dev] [PATCH v4 " Jingjing Wu
2016-03-09 6:00 ` [dpdk-dev] [PATCH v4 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
@ 2016-03-09 6:00 ` Jingjing Wu
2016-03-09 9:59 ` Thomas Monjalon
2016-03-10 3:41 ` [dpdk-dev] [PATCH v5 0/2] i40evf: pf reset event report Jingjing Wu
2 siblings, 1 reply; 42+ messages in thread
From: Jingjing Wu @ 2016-03-09 6:00 UTC (permalink / raw)
To: bruce.richardson; +Cc: dev
When Linux PF and DPDK VF are used for i40e PMD, In case of PF reset,
interrupt will go via adminq event, VF need be informed the event,
a callback mechanism is introduced by VF. This will allow VF to
invoke callback when reset happens.
Users can register a callback for this interrupt event like:
rte_eth_dev_callback_register(portid,
RTE_ETH_EVENT_INTR_RESET,
reset_event_callback,
arg);
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
---
doc/guides/rel_notes/release_16_04.rst | 2 +
drivers/net/i40e/i40e_ethdev_vf.c | 272 +++++++++++++++++++++++++++++----
lib/librte_ether/rte_ethdev.h | 1 +
3 files changed, 246 insertions(+), 29 deletions(-)
diff --git a/doc/guides/rel_notes/release_16_04.rst b/doc/guides/rel_notes/release_16_04.rst
index eab5f92..a872d40 100644
--- a/doc/guides/rel_notes/release_16_04.rst
+++ b/doc/guides/rel_notes/release_16_04.rst
@@ -105,6 +105,8 @@ This section should contain new features added in this release. Sample format:
be down.
We added the support of auto-neg by SW to avoid this link down issue.
+* **Added pf reset event reported in i40e vf PMD driver.
+
Resolved Issues
---------------
diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
index 90edeb5..ede4bc2 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -74,8 +74,6 @@
#define I40EVF_BUSY_WAIT_DELAY 10
#define I40EVF_BUSY_WAIT_COUNT 50
#define MAX_RESET_WAIT_CNT 20
-/*ITR index for NOITR*/
-#define I40E_QINT_RQCTL_MSIX_INDX_NOITR 3
struct i40evf_arq_msg_info {
enum i40e_virtchnl_ops ops;
@@ -151,6 +149,9 @@ static int
i40evf_dev_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id);
static int
i40evf_dev_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id);
+static void i40evf_handle_pf_event(__rte_unused struct rte_eth_dev *dev,
+ uint8_t *msg,
+ uint16_t msglen);
/* Default hash key buffer for RSS */
static uint32_t rss_key_default[I40E_VFQF_HKEY_MAX_INDEX + 1];
@@ -335,19 +336,40 @@ i40evf_execute_vf_cmd(struct rte_eth_dev *dev, struct vf_cmd_info *args)
return err;
}
- do {
- ret = i40evf_read_pfmsg(dev, &info);
- if (ret == I40EVF_MSG_CMD) {
- err = 0;
- break;
- } else if (ret == I40EVF_MSG_ERR) {
- err = -1;
- break;
- }
- rte_delay_ms(ASQ_DELAY_MS);
- /* If don't read msg or read sys event, continue */
- } while (i++ < MAX_TRY_TIMES);
- _clear_cmd(vf);
+ switch (args->ops) {
+ case I40E_VIRTCHNL_OP_RESET_VF:
+ /*no need to process in this function */
+ break;
+ case I40E_VIRTCHNL_OP_VERSION:
+ case I40E_VIRTCHNL_OP_GET_VF_RESOURCES:
+ /* for init adminq commands, need to poll the response */
+ do {
+ ret = i40evf_read_pfmsg(dev, &info);
+ if (ret == I40EVF_MSG_CMD) {
+ err = 0;
+ break;
+ } else if (ret == I40EVF_MSG_ERR) {
+ err = -1;
+ break;
+ }
+ rte_delay_ms(ASQ_DELAY_MS);
+ /* If don't read msg or read sys event, continue */
+ } while (i++ < MAX_TRY_TIMES);
+ _clear_cmd(vf);
+ break;
+
+ default:
+ /* for other adminq in running time, waiting the cmd done flag */
+ do {
+ if (vf->pend_cmd == I40E_VIRTCHNL_OP_UNKNOWN) {
+ err = 0;
+ break;
+ }
+ rte_delay_ms(ASQ_DELAY_MS);
+ /* If don't read msg or read sys event, continue */
+ } while (i++ < MAX_TRY_TIMES);
+ break;
+ }
return err | vf->cmd_retval;
}
@@ -696,7 +718,7 @@ i40evf_config_irq_map(struct rte_eth_dev *dev)
map_info = (struct i40e_virtchnl_irq_map_info *)cmd_buffer;
map_info->num_vectors = 1;
- map_info->vecmap[0].rxitr_idx = I40E_QINT_RQCTL_MSIX_INDX_NOITR;
+ map_info->vecmap[0].rxitr_idx = I40E_ITR_INDEX_DEFAULT;
map_info->vecmap[0].vsi_id = vf->vsi_res->vsi_id;
/* Alway use default dynamic MSIX interrupt */
map_info->vecmap[0].vector_id = vector_id;
@@ -1070,6 +1092,38 @@ i40evf_dev_atomic_write_link_status(struct rte_eth_dev *dev,
return 0;
}
+/* Disable IRQ0 */
+static inline void
+i40evf_disable_irq0(struct i40e_hw *hw)
+{
+ /* Disable all interrupt types */
+ I40E_WRITE_REG(hw, I40E_VFINT_ICR0_ENA1, 0);
+ I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
+ I40E_VFINT_DYN_CTL01_ITR_INDX_MASK);
+ I40EVF_WRITE_FLUSH(hw);
+}
+
+/* Enable IRQ0 */
+static inline void
+i40evf_enable_irq0(struct i40e_hw *hw)
+{
+ /* Enable admin queue interrupt trigger */
+ uint32_t val;
+
+ i40evf_disable_irq0(hw);
+ val = I40E_READ_REG(hw, I40E_VFINT_ICR0_ENA1);
+ val |= I40E_VFINT_ICR0_ENA1_ADMINQ_MASK |
+ I40E_VFINT_ICR0_ENA1_LINK_STAT_CHANGE_MASK;
+ I40E_WRITE_REG(hw, I40E_VFINT_ICR0_ENA1, val);
+
+ I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
+ I40E_VFINT_DYN_CTL01_INTENA_MASK |
+ I40E_VFINT_DYN_CTL01_CLEARPBA_MASK |
+ I40E_VFINT_DYN_CTL01_ITR_INDX_MASK);
+
+ I40EVF_WRITE_FLUSH(hw);
+}
+
static int
i40evf_reset_vf(struct i40e_hw *hw)
{
@@ -1115,6 +1169,8 @@ i40evf_init_vf(struct rte_eth_dev *dev)
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
struct ether_addr *p_mac_addr;
+ uint16_t interval =
+ i40e_calc_itr_interval(I40E_QUEUE_ITR_INTERVAL_MAX);
vf->adapter = I40E_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
vf->dev_data = dev->data;
@@ -1195,6 +1251,16 @@ i40evf_init_vf(struct rte_eth_dev *dev)
else
eth_random_addr(hw->mac.addr); /* Generate a random one */
+ /* If the PF host is not DPDK, set the interval of ITR0 to max*/
+ if (vf->version_major != I40E_DPDK_VERSION_MAJOR) {
+ I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
+ (I40E_ITR_INDEX_DEFAULT <<
+ I40E_VFINT_DYN_CTL0_ITR_INDX_SHIFT) |
+ (interval <<
+ I40E_VFINT_DYN_CTL0_INTERVAL_SHIFT));
+ I40EVF_WRITE_FLUSH(hw);
+ }
+
return 0;
err_alloc:
@@ -1223,11 +1289,142 @@ i40evf_uninit_vf(struct rte_eth_dev *dev)
return 0;
}
+static void
+i40evf_handle_pf_event(__rte_unused struct rte_eth_dev *dev,
+ uint8_t *msg,
+ __rte_unused uint16_t msglen)
+{
+ struct i40e_virtchnl_pf_event *pf_msg =
+ (struct i40e_virtchnl_pf_event *)msg;
+
+ switch (pf_msg->event) {
+ case I40E_VIRTCHNL_EVENT_RESET_IMPENDING:
+ PMD_DRV_LOG(DEBUG, "VIRTCHNL_EVENT_RESET_IMPENDING event\n");
+ _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_RESET);
+ break;
+ case I40E_VIRTCHNL_EVENT_LINK_CHANGE:
+ PMD_DRV_LOG(DEBUG, "VIRTCHNL_EVENT_LINK_CHANGE event\n");
+ break;
+ case I40E_VIRTCHNL_EVENT_PF_DRIVER_CLOSE:
+ PMD_DRV_LOG(DEBUG, "VIRTCHNL_EVENT_PF_DRIVER_CLOSE event\n");
+ break;
+ default:
+ PMD_DRV_LOG(ERR, " unknown event received %u", pf_msg->event);
+ break;
+ }
+}
+
+static void
+i40evf_handle_aq_msg(struct rte_eth_dev *dev)
+{
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
+ struct i40e_arq_event_info info;
+ struct i40e_virtchnl_msg *v_msg;
+ uint16_t pending, opcode;
+ int ret;
+
+ info.buf_len = I40E_AQ_BUF_SZ;
+ if (!vf->aq_resp) {
+ PMD_DRV_LOG(ERR, "Buffer for adminq resp should not be NULL");
+ return;
+ }
+ info.msg_buf = vf->aq_resp;
+ v_msg = (struct i40e_virtchnl_msg *)&info.desc;
+
+ pending = 1;
+ while (pending) {
+ ret = i40e_clean_arq_element(hw, &info, &pending);
+
+ if (ret != I40E_SUCCESS) {
+ PMD_DRV_LOG(INFO, "Failed to read msg from AdminQ,"
+ "ret: %d", ret);
+ break;
+ }
+ opcode = rte_le_to_cpu_16(info.desc.opcode);
+
+ switch (opcode) {
+ case i40e_aqc_opc_send_msg_to_vf:
+ if (v_msg->v_opcode == I40E_VIRTCHNL_OP_EVENT)
+ /* process event*/
+ i40evf_handle_pf_event(dev, info.msg_buf,
+ info.msg_len);
+ else {
+ /* read message and it's expected one */
+ if (v_msg->v_opcode == vf->pend_cmd) {
+ vf->cmd_retval = v_msg->v_retval;
+ /* prevent compiler reordering */
+ rte_compiler_barrier();
+ _clear_cmd(vf);
+ } else
+ PMD_DRV_LOG(ERR, "command mismatch,"
+ "expect %u, get %u",
+ vf->pend_cmd, v_msg->v_opcode);
+ PMD_DRV_LOG(DEBUG, "adminq response is received,"
+ " opcode = %d\n", v_msg->v_opcode);
+ }
+ break;
+ default:
+ PMD_DRV_LOG(ERR, "Request %u is not supported yet",
+ opcode);
+ break;
+ }
+ }
+}
+
+/**
+ * Interrupt handler triggered by NIC for handling
+ * specific interrupt. Only adminq interrupt is processed in VF.
+ *
+ * @param handle
+ * Pointer to interrupt handle.
+ * @param param
+ * The address of parameter (struct rte_eth_dev *) regsitered before.
+ *
+ * @return
+ * void
+ */
+static void
+i40evf_dev_interrupt_handler(__rte_unused struct rte_intr_handle *handle,
+ void *param)
+{
+ struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint32_t icr0;
+
+ i40evf_disable_irq0(hw);
+
+ /* read out interrupt causes */
+ icr0 = I40E_READ_REG(hw, I40E_VFINT_ICR01);
+
+ /* No interrupt event indicated */
+ if (!(icr0 & I40E_VFINT_ICR01_INTEVENT_MASK)) {
+ PMD_DRV_LOG(DEBUG, "No interrupt event, nothing to do\n");
+ goto done;
+ }
+
+ if (icr0 & I40E_VFINT_ICR01_ADMINQ_MASK) {
+ PMD_DRV_LOG(DEBUG, "ICR01_ADMINQ is reported\n");
+ i40evf_handle_aq_msg(dev);
+ }
+
+ /* Link Status Change interrupt */
+ if (icr0 & I40E_VFINT_ICR01_LINK_STAT_CHANGE_MASK)
+ PMD_DRV_LOG(DEBUG, "LINK_STAT_CHANGE is reported,"
+ " do nothing\n");
+
+done:
+ i40evf_enable_irq0(hw);
+ rte_intr_enable(&(dev->pci_dev->intr_handle));
+}
+
+
static int
i40evf_dev_init(struct rte_eth_dev *eth_dev)
{
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(\
eth_dev->data->dev_private);
+ struct rte_pci_device *pci_dev = eth_dev->pci_dev;
PMD_INIT_FUNC_TRACE();
@@ -1262,6 +1459,16 @@ i40evf_dev_init(struct rte_eth_dev *eth_dev)
return -1;
}
+ /* register callback func to eal lib */
+ rte_intr_callback_register(&(pci_dev->intr_handle),
+ i40evf_dev_interrupt_handler, (void *)eth_dev);
+
+ /* enable uio intr after callback register */
+ rte_intr_enable(&(pci_dev->intr_handle));
+
+ /* configure and enable device interrupt */
+ i40evf_enable_irq0(hw);
+
/* copy mac addr */
eth_dev->data->mac_addrs = rte_zmalloc("i40evf_mac",
ETHER_ADDR_LEN, 0);
@@ -1639,7 +1846,8 @@ i40evf_enable_queues_intr(struct rte_eth_dev *dev)
I40E_WRITE_REG(hw,
I40E_VFINT_DYN_CTL01,
I40E_VFINT_DYN_CTL01_INTENA_MASK |
- I40E_VFINT_DYN_CTL01_CLEARPBA_MASK);
+ I40E_VFINT_DYN_CTL01_CLEARPBA_MASK |
+ I40E_VFINT_DYN_CTL01_ITR_INDX_MASK);
I40EVF_WRITE_FLUSH(hw);
return;
}
@@ -1650,11 +1858,10 @@ i40evf_enable_queues_intr(struct rte_eth_dev *dev)
I40E_VFINT_DYN_CTLN1(I40EVF_VSI_DEFAULT_MSIX_INTR - 1),
I40E_VFINT_DYN_CTLN1_INTENA_MASK |
I40E_VFINT_DYN_CTLN_CLEARPBA_MASK);
- else
- /* To support Linux PF host */
- I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
- I40E_VFINT_DYN_CTL01_INTENA_MASK |
- I40E_VFINT_DYN_CTL01_CLEARPBA_MASK);
+ /* If host driver is kernel driver, do nothing.
+ * Interrupt 0 is used for rx packets, but don't set I40E_VFINT_DYN_CTL01,
+ * because it is already done in i40evf_enable_irq0.
+ */
I40EVF_WRITE_FLUSH(hw);
}
@@ -1667,7 +1874,8 @@ i40evf_disable_queues_intr(struct rte_eth_dev *dev)
struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
if (!rte_intr_allow_others(intr_handle)) {
- I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01, 0);
+ I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
+ I40E_VFINT_DYN_CTL01_ITR_INDX_MASK);
I40EVF_WRITE_FLUSH(hw);
return;
}
@@ -1677,8 +1885,10 @@ i40evf_disable_queues_intr(struct rte_eth_dev *dev)
I40E_VFINT_DYN_CTLN1(I40EVF_VSI_DEFAULT_MSIX_INTR
- 1),
0);
- else
- I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01, 0);
+ /* If host driver is kernel driver, do nothing.
+ * Interrupt 0 is used for rx packets, but don't zero I40E_VFINT_DYN_CTL01,
+ * because interrupt 0 is also used for adminq processing.
+ */
I40EVF_WRITE_FLUSH(hw);
}
@@ -1802,10 +2012,6 @@ i40evf_dev_start(struct rte_eth_dev *dev)
goto err_mac;
}
- /* vf don't allow intr except for rxq intr */
- if (dev->data->dev_conf.intr_conf.rxq != 0)
- rte_intr_enable(intr_handle);
-
i40evf_enable_queues_intr(dev);
return 0;
@@ -1997,12 +2203,20 @@ static void
i40evf_dev_close(struct rte_eth_dev *dev)
{
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct rte_pci_device *pci_dev = dev->pci_dev;
i40evf_dev_stop(dev);
hw->adapter_stopped = 1;
i40e_dev_free_queues(dev);
i40evf_reset_vf(hw);
i40e_shutdown_adminq(hw);
+ /* disable uio intr before callback unregister */
+ rte_intr_disable(&(pci_dev->intr_handle));
+
+ /* unregister callback func from eal lib */
+ rte_intr_callback_unregister(&(pci_dev->intr_handle),
+ i40evf_dev_interrupt_handler, (void *)dev);
+ i40evf_disable_irq0(hw);
}
static int
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index e2893ba..0c81435 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -2663,6 +2663,7 @@ rte_eth_tx_burst(uint8_t port_id, uint16_t queue_id,
enum rte_eth_event_type {
RTE_ETH_EVENT_UNKNOWN, /**< unknown event type */
RTE_ETH_EVENT_INTR_LSC, /**< lsc interrupt event */
+ RTE_ETH_EVENT_INTR_RESET, /**< reset interrupt event */
RTE_ETH_EVENT_MAX /**< max value of this enum */
};
--
2.4.0
^ permalink raw reply [flat|nested] 42+ messages in thread* Re: [dpdk-dev] [PATCH v4 2/2] i40evf: support to report pf reset event
2016-03-09 6:00 ` [dpdk-dev] [PATCH v4 2/2] i40evf: support to report pf reset event Jingjing Wu
@ 2016-03-09 9:59 ` Thomas Monjalon
2016-03-09 11:01 ` Bruce Richardson
0 siblings, 1 reply; 42+ messages in thread
From: Thomas Monjalon @ 2016-03-09 9:59 UTC (permalink / raw)
To: Jingjing Wu, bruce.richardson; +Cc: dev
2016-03-09 14:00, Jingjing Wu:
> When Linux PF and DPDK VF are used for i40e PMD, In case of PF reset,
> interrupt will go via adminq event, VF need be informed the event,
> a callback mechanism is introduced by VF. This will allow VF to
> invoke callback when reset happens.
> Users can register a callback for this interrupt event like:
> rte_eth_dev_callback_register(portid,
> RTE_ETH_EVENT_INTR_RESET,
> reset_event_callback,
> arg);
[...]
> --- a/doc/guides/rel_notes/release_16_04.rst
> +++ b/doc/guides/rel_notes/release_16_04.rst
> @@ -105,6 +105,8 @@ This section should contain new features added in this release. Sample format:
> be down.
> We added the support of auto-neg by SW to avoid this link down issue.
>
> +* **Added pf reset event reported in i40e vf PMD driver.
Bruce, is this comment clear enough for an user?
Beware of the wrong formating (missing **)
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [dpdk-dev] [PATCH v4 2/2] i40evf: support to report pf reset event
2016-03-09 9:59 ` Thomas Monjalon
@ 2016-03-09 11:01 ` Bruce Richardson
2016-03-09 11:26 ` [dpdk-dev] expectations on maintainer's review Thomas Monjalon
0 siblings, 1 reply; 42+ messages in thread
From: Bruce Richardson @ 2016-03-09 11:01 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
On Wed, Mar 09, 2016 at 10:59:56AM +0100, Thomas Monjalon wrote:
> 2016-03-09 14:00, Jingjing Wu:
> > When Linux PF and DPDK VF are used for i40e PMD, In case of PF reset,
> > interrupt will go via adminq event, VF need be informed the event,
> > a callback mechanism is introduced by VF. This will allow VF to
> > invoke callback when reset happens.
> > Users can register a callback for this interrupt event like:
> > rte_eth_dev_callback_register(portid,
> > RTE_ETH_EVENT_INTR_RESET,
> > reset_event_callback,
> > arg);
> [...]
> > --- a/doc/guides/rel_notes/release_16_04.rst
> > +++ b/doc/guides/rel_notes/release_16_04.rst
> > @@ -105,6 +105,8 @@ This section should contain new features added in this release. Sample format:
> > be down.
> > We added the support of auto-neg by SW to avoid this link down issue.
> >
> > +* **Added pf reset event reported in i40e vf PMD driver.
>
> Bruce, is this comment clear enough for an user?
>
> Beware of the wrong formating (missing **)
It's pretty ok, though I might word it a little differently myself. "reported"
should be "reporting".
Your question, though, does bring up the issue of scope and reviews again. I, as
committer, spend a lot of time tweaking commit messages, sanity checking
patches for compilation errors under various settings, and running checkpatch
etc. before applying them. However, IMHO it is up to the maintainers of the
various subsystems to enforce proper documentation in the patches submitted.
The maintainers are the primary gatekeepers here, and I, for one, don't want to
end up having to review all patches in detail before I apply them - otherwise
we'll be limited to a very small number of driver patches per release :)
In this case, if the submitter of the patch and the maintainer of the driver in
question are happy with the documentation, then who am I to go querying that. :-)
Having committers do full review on apply will only have two possible effects:
1. make the maintainers less conscientious about their job, since they know the
committers will catch any real bugs or issues on apply
2. cause a lot of problems for submitters as they see a lot of issues being
flagged at the last minute by committers, when they thought their patch was
safely acked and ready for commit for some time.
We certainly see lots of the second issue occurring right now, I believe - [I'm
obvously not going to comment on the former :-)]
I'd be very much in favour of having a rule that once a patch is acked by a
maintainer, then it must be applied. We may suffer a bit from slightly lower
quality patches getting applied, but the speed of applying patches should
increase, and the patch contents can always be fixed by subsequent patches later.
[Unlike commit message which can't be fixed later without rewriting git history]
In this case, I feel that phrase "the perfect is the enemy of the good" applies.
https://en.wikipedia.org/wiki/Perfect_is_the_enemy_of_good
Just my 2c on this. I'm sure you have a different view, Thomas, so it's probably
a discussion worth having.
/Bruce
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [dpdk-dev] expectations on maintainer's review
2016-03-09 11:01 ` Bruce Richardson
@ 2016-03-09 11:26 ` Thomas Monjalon
2016-03-09 14:15 ` Bruce Richardson
0 siblings, 1 reply; 42+ messages in thread
From: Thomas Monjalon @ 2016-03-09 11:26 UTC (permalink / raw)
To: Bruce Richardson, dev
I've changed the title for this discussion.
2016-03-09 11:01, Bruce Richardson:
[snip comments about minor issue in release notes]
> Your question, though, does bring up the issue of scope and reviews again. I, as
> committer, spend a lot of time tweaking commit messages, sanity checking
> patches for compilation errors under various settings, and running checkpatch
> etc. before applying them. However, IMHO it is up to the maintainers of the
> various subsystems to enforce proper documentation in the patches submitted.
> The maintainers are the primary gatekeepers here, and I, for one, don't want to
> end up having to review all patches in detail before I apply them - otherwise
> we'll be limited to a very small number of driver patches per release :)
Yes that's a problem.
> In this case, if the submitter of the patch and the maintainer of the driver in
> question are happy with the documentation, then who am I to go querying that. :-)
>
> Having committers do full review on apply will only have two possible effects:
> 1. make the maintainers less conscientious about their job, since they know the
> committers will catch any real bugs or issues on apply
Yes we need maintainers to be conscientious on every parts of the patches.
One problem about the release notes and doc, is that not a lot of maintainers
have the "english skills".
Note that it would be easier if we would allow to write in Irish, Chinese or
French languages ;)
Unfortunately we took the constraints of writing in C and English.
> 2. cause a lot of problems for submitters as they see a lot of issues being
> flagged at the last minute by committers, when they thought their patch was
> safely acked and ready for commit for some time.
>
> We certainly see lots of the second issue occurring right now, I believe - [I'm
> obvously not going to comment on the former :-)]
>
> I'd be very much in favour of having a rule that once a patch is acked by a
> maintainer, then it must be applied. We may suffer a bit from slightly lower
> quality patches getting applied, but the speed of applying patches should
> increase, and the patch contents can always be fixed by subsequent patches later.
> [Unlike commit message which can't be fixed later without rewriting git history]
> In this case, I feel that phrase "the perfect is the enemy of the good" applies.
> https://en.wikipedia.org/wiki/Perfect_is_the_enemy_of_good
Yes but I don't think saying we are OK to decrease the quality is a good message.
The reality is that people never rework what was been committed.
That's why we must be very careful on API and documentation.
About the release notes, decreasing its quality mean we don't care wether it is
read and understood. So maybe we can shrink it to less details and have only a
title with a git/author reference.
> Just my 2c on this. I'm sure you have a different view, Thomas, so it's probably
> a discussion worth having.
Thanks for bringing the discussion.
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [dpdk-dev] expectations on maintainer's review
2016-03-09 11:26 ` [dpdk-dev] expectations on maintainer's review Thomas Monjalon
@ 2016-03-09 14:15 ` Bruce Richardson
2016-03-09 14:19 ` Thomas Monjalon
0 siblings, 1 reply; 42+ messages in thread
From: Bruce Richardson @ 2016-03-09 14:15 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
On Wed, Mar 09, 2016 at 12:26:58PM +0100, Thomas Monjalon wrote:
> I've changed the title for this discussion.
>
> 2016-03-09 11:01, Bruce Richardson:
> [snip comments about minor issue in release notes]
>
> > Your question, though, does bring up the issue of scope and reviews again. I, as
> > committer, spend a lot of time tweaking commit messages, sanity checking
> > patches for compilation errors under various settings, and running checkpatch
> > etc. before applying them. However, IMHO it is up to the maintainers of the
> > various subsystems to enforce proper documentation in the patches submitted.
> > The maintainers are the primary gatekeepers here, and I, for one, don't want to
> > end up having to review all patches in detail before I apply them - otherwise
> > we'll be limited to a very small number of driver patches per release :)
>
> Yes that's a problem.
>
> > In this case, if the submitter of the patch and the maintainer of the driver in
> > question are happy with the documentation, then who am I to go querying that. :-)
> >
> > Having committers do full review on apply will only have two possible effects:
> > 1. make the maintainers less conscientious about their job, since they know the
> > committers will catch any real bugs or issues on apply
>
> Yes we need maintainers to be conscientious on every parts of the patches.
Definite +1
> One problem about the release notes and doc, is that not a lot of maintainers
> have the "english skills".
> Note that it would be easier if we would allow to write in Irish, Chinese or
> French languages ;)
> Unfortunately we took the constraints of writing in C and English.
>
Yes, language is a good point, and I'm ok with helping to clean up grammar and
minor language issues e.g. the one word correction I suggested at the start of
this discussion. For the scope of the text, and whether it contains enough
information, I would tend to push that responsibility back on the maintainer
though.
> > 2. cause a lot of problems for submitters as they see a lot of issues being
> > flagged at the last minute by committers, when they thought their patch was
> > safely acked and ready for commit for some time.
> >
> > We certainly see lots of the second issue occurring right now, I believe - [I'm
> > obvously not going to comment on the former :-)]
> >
> > I'd be very much in favour of having a rule that once a patch is acked by a
> > maintainer, then it must be applied. We may suffer a bit from slightly lower
> > quality patches getting applied, but the speed of applying patches should
> > increase, and the patch contents can always be fixed by subsequent patches later.
> > [Unlike commit message which can't be fixed later without rewriting git history]
> > In this case, I feel that phrase "the perfect is the enemy of the good" applies.
> > https://en.wikipedia.org/wiki/Perfect_is_the_enemy_of_good
>
> Yes but I don't think saying we are OK to decrease the quality is a good message.
> The reality is that people never rework what was been committed.
Yes, point taken.
> That's why we must be very careful on API and documentation.
> About the release notes, decreasing its quality mean we don't care wether it is
> read and understood. So maybe we can shrink it to less details and have only a
> title with a git/author reference.
I don't think I agree with that. I think the doc should be readable independently
of having the git repo.
>
> > Just my 2c on this. I'm sure you have a different view, Thomas, so it's probably
> > a discussion worth having.
>
> Thanks for bringing the discussion.
Indeed. So I would summarise this as:
* an ask to the maintainers to pay increased attention to documentation side of
patches when reviewing and acking.
* on my end, I will do some doc reviews as part of applying commits, but on a
best-effort basis. The primary responsibility is with the maintainers to ensure
documentation quantity before patch application stage.
Does that seem reasonable?
Regards,
/Bruce
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [dpdk-dev] expectations on maintainer's review
2016-03-09 14:15 ` Bruce Richardson
@ 2016-03-09 14:19 ` Thomas Monjalon
0 siblings, 0 replies; 42+ messages in thread
From: Thomas Monjalon @ 2016-03-09 14:19 UTC (permalink / raw)
To: Bruce Richardson; +Cc: dev
2016-03-09 14:15, Bruce Richardson:
> On Wed, Mar 09, 2016 at 12:26:58PM +0100, Thomas Monjalon wrote:
> > I've changed the title for this discussion.
> >
> > 2016-03-09 11:01, Bruce Richardson:
> > [snip comments about minor issue in release notes]
> >
> > > Your question, though, does bring up the issue of scope and reviews again. I, as
> > > committer, spend a lot of time tweaking commit messages, sanity checking
> > > patches for compilation errors under various settings, and running checkpatch
> > > etc. before applying them. However, IMHO it is up to the maintainers of the
> > > various subsystems to enforce proper documentation in the patches submitted.
> > > The maintainers are the primary gatekeepers here, and I, for one, don't want to
> > > end up having to review all patches in detail before I apply them - otherwise
> > > we'll be limited to a very small number of driver patches per release :)
> >
> > Yes that's a problem.
> >
> > > In this case, if the submitter of the patch and the maintainer of the driver in
> > > question are happy with the documentation, then who am I to go querying that. :-)
> > >
> > > Having committers do full review on apply will only have two possible effects:
> > > 1. make the maintainers less conscientious about their job, since they know the
> > > committers will catch any real bugs or issues on apply
> >
> > Yes we need maintainers to be conscientious on every parts of the patches.
>
> Definite +1
>
> > One problem about the release notes and doc, is that not a lot of maintainers
> > have the "english skills".
> > Note that it would be easier if we would allow to write in Irish, Chinese or
> > French languages ;)
> > Unfortunately we took the constraints of writing in C and English.
> >
>
> Yes, language is a good point, and I'm ok with helping to clean up grammar and
> minor language issues e.g. the one word correction I suggested at the start of
> this discussion. For the scope of the text, and whether it contains enough
> information, I would tend to push that responsibility back on the maintainer
> though.
>
>
> > > 2. cause a lot of problems for submitters as they see a lot of issues being
> > > flagged at the last minute by committers, when they thought their patch was
> > > safely acked and ready for commit for some time.
> > >
> > > We certainly see lots of the second issue occurring right now, I believe - [I'm
> > > obvously not going to comment on the former :-)]
> > >
> > > I'd be very much in favour of having a rule that once a patch is acked by a
> > > maintainer, then it must be applied. We may suffer a bit from slightly lower
> > > quality patches getting applied, but the speed of applying patches should
> > > increase, and the patch contents can always be fixed by subsequent patches later.
> > > [Unlike commit message which can't be fixed later without rewriting git history]
> > > In this case, I feel that phrase "the perfect is the enemy of the good" applies.
> > > https://en.wikipedia.org/wiki/Perfect_is_the_enemy_of_good
> >
> > Yes but I don't think saying we are OK to decrease the quality is a good message.
> > The reality is that people never rework what was been committed.
>
> Yes, point taken.
>
> > That's why we must be very careful on API and documentation.
> > About the release notes, decreasing its quality mean we don't care wether it is
> > read and understood. So maybe we can shrink it to less details and have only a
> > title with a git/author reference.
>
> I don't think I agree with that. I think the doc should be readable independently
> of having the git repo.
>
> >
> > > Just my 2c on this. I'm sure you have a different view, Thomas, so it's probably
> > > a discussion worth having.
> >
> > Thanks for bringing the discussion.
>
> Indeed. So I would summarise this as:
> * an ask to the maintainers to pay increased attention to documentation side of
> patches when reviewing and acking.
> * on my end, I will do some doc reviews as part of applying commits, but on a
> best-effort basis. The primary responsibility is with the maintainers to ensure
> documentation quantity before patch application stage.
>
> Does that seem reasonable?
Yes and I'd like to hear some maintainers to comment or commit this summary.
^ permalink raw reply [flat|nested] 42+ messages in thread
* [dpdk-dev] [PATCH v5 0/2] i40evf: pf reset event report
2016-03-09 6:00 ` [dpdk-dev] [PATCH v4 " Jingjing Wu
2016-03-09 6:00 ` [dpdk-dev] [PATCH v4 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
2016-03-09 6:00 ` [dpdk-dev] [PATCH v4 2/2] i40evf: support to report pf reset event Jingjing Wu
@ 2016-03-10 3:41 ` Jingjing Wu
2016-03-10 3:41 ` [dpdk-dev] [PATCH v5 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
` (2 more replies)
2 siblings, 3 replies; 42+ messages in thread
From: Jingjing Wu @ 2016-03-10 3:41 UTC (permalink / raw)
To: bruce.richardson; +Cc: dev
v5 changes:
- doc rewording and format fixing.
v4 changes:
- rebase on latest dpdk-next-net/rel_16_04 branch (commit 0f9564a0e4f2)
v3 changes:
- commit log doc rewording.
- rebase on latest dpdk-next-net/rel_16_04 branch.
- remove few useless line.
- adjust interval and increase times for waiting pf msg
v2 changes:
- remove the change on vf reset status checking
- add pf event report support in release note
When Linux PF and DPDK VF are used for i40e PMD, In case of PF
reset, interrupt request will go via adminq event, VF need be
informed, a callback mechanism is introduced by VF. This will
allow VF to invoke callback when reset happens.
Users can register a callback for this interrupt event like:
rte_eth_dev_callback_register(portid,
RTE_ETH_EVENT_INTR_RESET,
reset_event_callback,
arg);
Jingjing Wu (2):
i40evf: allocate virtchnl cmd buffer for each vf
i40evf: support to report pf reset event
doc/guides/rel_notes/release_16_04.rst | 2 +
drivers/net/i40e/i40e_ethdev.h | 2 +
drivers/net/i40e/i40e_ethdev_vf.c | 420 +++++++++++++++++++++++----------
lib/librte_ether/rte_ethdev.h | 1 +
4 files changed, 302 insertions(+), 123 deletions(-)
--
2.4.0
^ permalink raw reply [flat|nested] 42+ messages in thread* [dpdk-dev] [PATCH v5 1/2] i40evf: allocate virtchnl cmd buffer for each vf
2016-03-10 3:41 ` [dpdk-dev] [PATCH v5 0/2] i40evf: pf reset event report Jingjing Wu
@ 2016-03-10 3:41 ` Jingjing Wu
2016-03-14 12:21 ` Bruce Richardson
2016-03-10 3:41 ` [dpdk-dev] [PATCH v5 2/2] i40evf: support to report pf reset event Jingjing Wu
2016-03-15 1:59 ` [dpdk-dev] [PATCH v6 0/2] i40evf: pf reset event report Jingjing Wu
2 siblings, 1 reply; 42+ messages in thread
From: Jingjing Wu @ 2016-03-10 3:41 UTC (permalink / raw)
To: bruce.richardson; +Cc: dev
Currently, i40evf PMD uses a global static buffer to send virtchnl
command to host driver. It is shared by multi VFs.
This patch changed to allocate virtchnl cmd buffer for each VF.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
---
drivers/net/i40e/i40e_ethdev.h | 2 +
drivers/net/i40e/i40e_ethdev_vf.c | 178 +++++++++++++++-----------------------
2 files changed, 71 insertions(+), 109 deletions(-)
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index a9b805e..8cd6126 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -497,7 +497,9 @@ struct i40e_vf {
bool link_up;
bool vf_reset;
volatile uint32_t pend_cmd; /* pending command not finished yet */
+ uint32_t cmd_retval; /* return value of the cmd response from PF */
u16 pend_msg; /* flags indicates events from pf not handled yet */
+ uint8_t *aq_resp; /* buffer to store the adminq response from PF */
/* VSI info */
struct i40e_virtchnl_vf_resource *vf_res; /* All VSIs */
diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
index 6185ee8..90edeb5 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -103,9 +103,6 @@ enum i40evf_aq_result {
I40EVF_MSG_CMD, /* Read async command result */
};
-/* A share buffer to store the command result from PF driver */
-static uint8_t cmd_result_buffer[I40E_AQ_BUF_SZ];
-
static int i40evf_dev_configure(struct rte_eth_dev *dev);
static int i40evf_dev_start(struct rte_eth_dev *dev);
static void i40evf_dev_stop(struct rte_eth_dev *dev);
@@ -217,31 +214,37 @@ static const struct eth_dev_ops i40evf_eth_dev_ops = {
};
/*
- * Parse admin queue message.
- *
- * return value:
- * < 0: meet error
- * 0: read sys msg
- * > 0: read cmd result
+ * Read data in admin queue to get msg from pf driver
*/
static enum i40evf_aq_result
-i40evf_parse_pfmsg(struct i40e_vf *vf,
- struct i40e_arq_event_info *event,
- struct i40evf_arq_msg_info *data)
+i40evf_read_pfmsg(struct rte_eth_dev *dev, struct i40evf_arq_msg_info *data)
{
- enum i40e_virtchnl_ops opcode = (enum i40e_virtchnl_ops)\
- rte_le_to_cpu_32(event->desc.cookie_high);
- enum i40e_status_code retval = (enum i40e_status_code)\
- rte_le_to_cpu_32(event->desc.cookie_low);
- enum i40evf_aq_result ret = I40EVF_MSG_CMD;
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
+ struct i40e_arq_event_info event;
+ enum i40e_virtchnl_ops opcode;
+ enum i40e_status_code retval;
+ int ret;
+ enum i40evf_aq_result result = I40EVF_MSG_NON;
+
+ event.buf_len = data->buf_len;
+ event.msg_buf = data->msg;
+ ret = i40e_clean_arq_element(hw, &event, NULL);
+ /* Can't read any msg from adminQ */
+ if (ret) {
+ if (ret != I40E_ERR_ADMIN_QUEUE_NO_WORK)
+ result = I40EVF_MSG_ERR;
+ return result;
+ }
+ opcode = (enum i40e_virtchnl_ops)rte_le_to_cpu_32(event.desc.cookie_high);
+ retval = (enum i40e_status_code)rte_le_to_cpu_32(event.desc.cookie_low);
/* pf sys event */
if (opcode == I40E_VIRTCHNL_OP_EVENT) {
struct i40e_virtchnl_pf_event *vpe =
- (struct i40e_virtchnl_pf_event *)event->msg_buf;
+ (struct i40e_virtchnl_pf_event *)event.msg_buf;
- /* Initialize ret to sys event */
- ret = I40EVF_MSG_SYS;
+ result = I40EVF_MSG_SYS;
switch (vpe->event) {
case I40E_VIRTCHNL_EVENT_LINK_CHANGE:
vf->link_up =
@@ -266,74 +269,17 @@ i40evf_parse_pfmsg(struct i40e_vf *vf,
}
} else {
/* async reply msg on command issued by vf previously */
- ret = I40EVF_MSG_CMD;
+ result = I40EVF_MSG_CMD;
/* Actual data length read from PF */
- data->msg_len = event->msg_len;
+ data->msg_len = event.msg_len;
}
- /* fill the ops and result to notify VF */
+
data->result = retval;
data->ops = opcode;
- return ret;
-}
-
-/*
- * Read data in admin queue to get msg from pf driver
- */
-static enum i40evf_aq_result
-i40evf_read_pfmsg(struct rte_eth_dev *dev, struct i40evf_arq_msg_info *data)
-{
- struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
- struct i40e_arq_event_info event;
- int ret;
- enum i40evf_aq_result result = I40EVF_MSG_NON;
-
- event.buf_len = data->buf_len;
- event.msg_buf = data->msg;
- ret = i40e_clean_arq_element(hw, &event, NULL);
- /* Can't read any msg from adminQ */
- if (ret) {
- if (ret == I40E_ERR_ADMIN_QUEUE_NO_WORK)
- result = I40EVF_MSG_NON;
- else
- result = I40EVF_MSG_ERR;
- return result;
- }
-
- /* Parse the event */
- result = i40evf_parse_pfmsg(vf, &event, data);
-
return result;
}
-/*
- * Polling read until command result return from pf driver or meet error.
- */
-static int
-i40evf_wait_cmd_done(struct rte_eth_dev *dev,
- struct i40evf_arq_msg_info *data)
-{
- int i = 0;
- enum i40evf_aq_result ret;
-
-#define MAX_TRY_TIMES 20
-#define ASQ_DELAY_MS 100
- do {
- /* Delay some time first */
- rte_delay_ms(ASQ_DELAY_MS);
- ret = i40evf_read_pfmsg(dev, data);
- if (ret == I40EVF_MSG_CMD)
- return 0;
- else if (ret == I40EVF_MSG_ERR)
- return -1;
-
- /* If don't read msg or read sys event, continue */
- } while(i++ < MAX_TRY_TIMES);
-
- return -1;
-}
-
/**
* clear current command. Only call in case execute
* _atomic_set_cmd successfully.
@@ -360,13 +306,18 @@ _atomic_set_cmd(struct i40e_vf *vf, enum i40e_virtchnl_ops ops)
return !ret;
}
+#define MAX_TRY_TIMES 200
+#define ASQ_DELAY_MS 10
+
static int
i40evf_execute_vf_cmd(struct rte_eth_dev *dev, struct vf_cmd_info *args)
{
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
- int err = -1;
struct i40evf_arq_msg_info info;
+ enum i40evf_aq_result ret;
+ int err = -1;
+ int i = 0;
if (_atomic_set_cmd(vf, args->ops))
return -1;
@@ -384,19 +335,21 @@ i40evf_execute_vf_cmd(struct rte_eth_dev *dev, struct vf_cmd_info *args)
return err;
}
- err = i40evf_wait_cmd_done(dev, &info);
- /* read message and it's expected one */
- if (!err && args->ops == info.ops)
- _clear_cmd(vf);
- else if (err) {
- PMD_DRV_LOG(ERR, "Failed to read message from AdminQ");
- _clear_cmd(vf);
- }
- else if (args->ops != info.ops)
- PMD_DRV_LOG(ERR, "command mismatch, expect %u, get %u",
- args->ops, info.ops);
+ do {
+ ret = i40evf_read_pfmsg(dev, &info);
+ if (ret == I40EVF_MSG_CMD) {
+ err = 0;
+ break;
+ } else if (ret == I40EVF_MSG_ERR) {
+ err = -1;
+ break;
+ }
+ rte_delay_ms(ASQ_DELAY_MS);
+ /* If don't read msg or read sys event, continue */
+ } while (i++ < MAX_TRY_TIMES);
+ _clear_cmd(vf);
- return err | info.result;
+ return err | vf->cmd_retval;
}
/*
@@ -416,7 +369,7 @@ i40evf_check_api_version(struct rte_eth_dev *dev)
args.ops = I40E_VIRTCHNL_OP_VERSION;
args.in_args = (uint8_t *)&version;
args.in_args_size = sizeof(version);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -454,7 +407,7 @@ i40evf_get_vf_resource(struct rte_eth_dev *dev)
uint32_t caps, len;
args.ops = I40E_VIRTCHNL_OP_GET_VF_RESOURCES;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
if (PF_IS_V11(vf)) {
caps = I40E_VIRTCHNL_VF_OFFLOAD_L2 |
@@ -507,7 +460,7 @@ i40evf_config_promisc(struct rte_eth_dev *dev,
args.ops = I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE;
args.in_args = (uint8_t *)&promisc;
args.in_args_size = sizeof(promisc);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -534,7 +487,7 @@ i40evf_config_vlan_offload(struct rte_eth_dev *dev,
args.ops = (enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_CFG_VLAN_OFFLOAD;
args.in_args = (uint8_t *)&offload;
args.in_args_size = sizeof(offload);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -565,7 +518,7 @@ i40evf_config_vlan_pvid(struct rte_eth_dev *dev,
args.ops = (enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_CFG_VLAN_PVID;
args.in_args = (uint8_t *)&tpid_info;
args.in_args_size = sizeof(tpid_info);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -644,7 +597,7 @@ i40evf_configure_vsi_queues(struct rte_eth_dev *dev)
args.ops = I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES;
args.in_args = (uint8_t *)vc_vqci;
args.in_args_size = size;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
ret = i40evf_execute_vf_cmd(dev, &args);
if (ret)
@@ -697,7 +650,7 @@ i40evf_configure_vsi_queues_ext(struct rte_eth_dev *dev)
(enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES_EXT;
args.in_args = (uint8_t *)vc_vqcei;
args.in_args_size = size;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
ret = i40evf_execute_vf_cmd(dev, &args);
if (ret)
@@ -759,7 +712,7 @@ i40evf_config_irq_map(struct rte_eth_dev *dev)
args.ops = I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP;
args.in_args = (u8 *)cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -790,7 +743,7 @@ i40evf_switch_queue(struct rte_eth_dev *dev, bool isrx, uint16_t qid,
args.ops = I40E_VIRTCHNL_OP_DISABLE_QUEUES;
args.in_args = (u8 *)&queue_select;
args.in_args_size = sizeof(queue_select);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -882,7 +835,7 @@ i40evf_add_mac_addr(struct rte_eth_dev *dev, struct ether_addr *addr)
args.ops = I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS;
args.in_args = cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -919,7 +872,7 @@ i40evf_del_mac_addr(struct rte_eth_dev *dev, struct ether_addr *addr)
args.ops = I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS;
args.in_args = cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -942,7 +895,7 @@ i40evf_update_stats(struct rte_eth_dev *dev, struct i40e_eth_stats **pstats)
args.ops = I40E_VIRTCHNL_OP_GET_STATS;
args.in_args = (u8 *)&q_stats;
args.in_args_size = sizeof(q_stats);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -1036,7 +989,7 @@ i40evf_add_vlan(struct rte_eth_dev *dev, uint16_t vlanid)
args.ops = I40E_VIRTCHNL_OP_ADD_VLAN;
args.in_args = (u8 *)&cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -1063,7 +1016,7 @@ i40evf_del_vlan(struct rte_eth_dev *dev, uint16_t vlanid)
args.ops = I40E_VIRTCHNL_OP_DEL_VLAN;
args.in_args = (u8 *)&cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -1075,6 +1028,7 @@ i40evf_del_vlan(struct rte_eth_dev *dev, uint16_t vlanid)
static int
i40evf_get_link_status(struct rte_eth_dev *dev, struct rte_eth_link *link)
{
+ struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
int err;
struct vf_cmd_info args;
struct rte_eth_link *new_link;
@@ -1082,7 +1036,7 @@ i40evf_get_link_status(struct rte_eth_dev *dev, struct rte_eth_link *link)
args.ops = (enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_GET_LINK_STAT;
args.in_args = NULL;
args.in_args_size = 0;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err) {
@@ -1177,7 +1131,6 @@ i40evf_init_vf(struct rte_eth_dev *dev)
goto err;
}
-
/* Reset VF and wait until it's complete */
if (i40evf_reset_vf(hw)) {
PMD_INIT_LOG(ERR, "reset NIC failed");
@@ -1195,6 +1148,11 @@ i40evf_init_vf(struct rte_eth_dev *dev)
PMD_INIT_LOG(ERR, "init_adminq failed");
return -1;
}
+ vf->aq_resp = rte_zmalloc("vf_aq_resp", I40E_AQ_BUF_SZ, 0);
+ if (!vf->aq_resp) {
+ PMD_INIT_LOG(ERR, "unable to allocate vf_aq_resp memory");
+ goto err_aq;
+ }
if (i40evf_check_api_version(dev) != 0) {
PMD_INIT_LOG(ERR, "check_api version failed");
goto err_aq;
@@ -1259,6 +1217,8 @@ i40evf_uninit_vf(struct rte_eth_dev *dev)
i40evf_dev_close(dev);
rte_free(vf->vf_res);
vf->vf_res = NULL;
+ rte_free(vf->aq_resp);
+ vf->aq_resp = NULL;
return 0;
}
--
2.4.0
^ permalink raw reply [flat|nested] 42+ messages in thread* Re: [dpdk-dev] [PATCH v5 1/2] i40evf: allocate virtchnl cmd buffer for each vf
2016-03-10 3:41 ` [dpdk-dev] [PATCH v5 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
@ 2016-03-14 12:21 ` Bruce Richardson
0 siblings, 0 replies; 42+ messages in thread
From: Bruce Richardson @ 2016-03-14 12:21 UTC (permalink / raw)
To: Jingjing Wu; +Cc: dev, helin.zhang, zhe.tao
On Thu, Mar 10, 2016 at 11:41:10AM +0800, Jingjing Wu wrote:
> Currently, i40evf PMD uses a global static buffer to send virtchnl
> command to host driver. It is shared by multi VFs.
> This patch changed to allocate virtchnl cmd buffer for each VF.
>
> Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
> Acked-by: Helin Zhang <helin.zhang@intel.com>
> ---
> drivers/net/i40e/i40e_ethdev.h | 2 +
> drivers/net/i40e/i40e_ethdev_vf.c | 178 +++++++++++++++-----------------------
> 2 files changed, 71 insertions(+), 109 deletions(-)
>
Hi Jingjing,
I get some compilation errors when I apply this to dpdk-next-net.
/home/bruce/next-net/dpdk-next-net/drivers/net/i40e/i40e_ethdev_vf.c: In function ‘i40evf_add_del_all_mac_addr’:
/home/bruce/next-net/dpdk-next-net/drivers/net/i40e/i40e_ethdev_vf.c:1801:21: error: ‘cmd_result_buffer’ undeclared (first use in this function)
args.out_buffer = cmd_result_buffer;
^
This is with Fedora 23 with gcc 5.3.1
/Bruce
^ permalink raw reply [flat|nested] 42+ messages in thread
* [dpdk-dev] [PATCH v5 2/2] i40evf: support to report pf reset event
2016-03-10 3:41 ` [dpdk-dev] [PATCH v5 0/2] i40evf: pf reset event report Jingjing Wu
2016-03-10 3:41 ` [dpdk-dev] [PATCH v5 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
@ 2016-03-10 3:41 ` Jingjing Wu
2016-03-15 1:59 ` [dpdk-dev] [PATCH v6 0/2] i40evf: pf reset event report Jingjing Wu
2 siblings, 0 replies; 42+ messages in thread
From: Jingjing Wu @ 2016-03-10 3:41 UTC (permalink / raw)
To: bruce.richardson; +Cc: dev
When Linux PF and DPDK VF are used for i40e PMD, In case of PF reset,
interrupt will go via adminq event, VF need be informed the event,
a callback mechanism is introduced by VF. This will allow VF to
invoke callback when reset happens.
Users can register a callback for this interrupt event like:
rte_eth_dev_callback_register(portid,
RTE_ETH_EVENT_INTR_RESET,
reset_event_callback,
arg);
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
---
doc/guides/rel_notes/release_16_04.rst | 2 +
drivers/net/i40e/i40e_ethdev_vf.c | 272 +++++++++++++++++++++++++++++----
lib/librte_ether/rte_ethdev.h | 1 +
3 files changed, 246 insertions(+), 29 deletions(-)
diff --git a/doc/guides/rel_notes/release_16_04.rst b/doc/guides/rel_notes/release_16_04.rst
index 5abf48a..68a35c9 100644
--- a/doc/guides/rel_notes/release_16_04.rst
+++ b/doc/guides/rel_notes/release_16_04.rst
@@ -119,6 +119,8 @@ This section should contain new features added in this release. Sample format:
Only available with Mellanox OFED >= 3.2.
+* **Added pf reset event reporting in i40e vf PMD driver.**
+
Resolved Issues
---------------
diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
index 90edeb5..ede4bc2 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -74,8 +74,6 @@
#define I40EVF_BUSY_WAIT_DELAY 10
#define I40EVF_BUSY_WAIT_COUNT 50
#define MAX_RESET_WAIT_CNT 20
-/*ITR index for NOITR*/
-#define I40E_QINT_RQCTL_MSIX_INDX_NOITR 3
struct i40evf_arq_msg_info {
enum i40e_virtchnl_ops ops;
@@ -151,6 +149,9 @@ static int
i40evf_dev_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id);
static int
i40evf_dev_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id);
+static void i40evf_handle_pf_event(__rte_unused struct rte_eth_dev *dev,
+ uint8_t *msg,
+ uint16_t msglen);
/* Default hash key buffer for RSS */
static uint32_t rss_key_default[I40E_VFQF_HKEY_MAX_INDEX + 1];
@@ -335,19 +336,40 @@ i40evf_execute_vf_cmd(struct rte_eth_dev *dev, struct vf_cmd_info *args)
return err;
}
- do {
- ret = i40evf_read_pfmsg(dev, &info);
- if (ret == I40EVF_MSG_CMD) {
- err = 0;
- break;
- } else if (ret == I40EVF_MSG_ERR) {
- err = -1;
- break;
- }
- rte_delay_ms(ASQ_DELAY_MS);
- /* If don't read msg or read sys event, continue */
- } while (i++ < MAX_TRY_TIMES);
- _clear_cmd(vf);
+ switch (args->ops) {
+ case I40E_VIRTCHNL_OP_RESET_VF:
+ /*no need to process in this function */
+ break;
+ case I40E_VIRTCHNL_OP_VERSION:
+ case I40E_VIRTCHNL_OP_GET_VF_RESOURCES:
+ /* for init adminq commands, need to poll the response */
+ do {
+ ret = i40evf_read_pfmsg(dev, &info);
+ if (ret == I40EVF_MSG_CMD) {
+ err = 0;
+ break;
+ } else if (ret == I40EVF_MSG_ERR) {
+ err = -1;
+ break;
+ }
+ rte_delay_ms(ASQ_DELAY_MS);
+ /* If don't read msg or read sys event, continue */
+ } while (i++ < MAX_TRY_TIMES);
+ _clear_cmd(vf);
+ break;
+
+ default:
+ /* for other adminq in running time, waiting the cmd done flag */
+ do {
+ if (vf->pend_cmd == I40E_VIRTCHNL_OP_UNKNOWN) {
+ err = 0;
+ break;
+ }
+ rte_delay_ms(ASQ_DELAY_MS);
+ /* If don't read msg or read sys event, continue */
+ } while (i++ < MAX_TRY_TIMES);
+ break;
+ }
return err | vf->cmd_retval;
}
@@ -696,7 +718,7 @@ i40evf_config_irq_map(struct rte_eth_dev *dev)
map_info = (struct i40e_virtchnl_irq_map_info *)cmd_buffer;
map_info->num_vectors = 1;
- map_info->vecmap[0].rxitr_idx = I40E_QINT_RQCTL_MSIX_INDX_NOITR;
+ map_info->vecmap[0].rxitr_idx = I40E_ITR_INDEX_DEFAULT;
map_info->vecmap[0].vsi_id = vf->vsi_res->vsi_id;
/* Alway use default dynamic MSIX interrupt */
map_info->vecmap[0].vector_id = vector_id;
@@ -1070,6 +1092,38 @@ i40evf_dev_atomic_write_link_status(struct rte_eth_dev *dev,
return 0;
}
+/* Disable IRQ0 */
+static inline void
+i40evf_disable_irq0(struct i40e_hw *hw)
+{
+ /* Disable all interrupt types */
+ I40E_WRITE_REG(hw, I40E_VFINT_ICR0_ENA1, 0);
+ I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
+ I40E_VFINT_DYN_CTL01_ITR_INDX_MASK);
+ I40EVF_WRITE_FLUSH(hw);
+}
+
+/* Enable IRQ0 */
+static inline void
+i40evf_enable_irq0(struct i40e_hw *hw)
+{
+ /* Enable admin queue interrupt trigger */
+ uint32_t val;
+
+ i40evf_disable_irq0(hw);
+ val = I40E_READ_REG(hw, I40E_VFINT_ICR0_ENA1);
+ val |= I40E_VFINT_ICR0_ENA1_ADMINQ_MASK |
+ I40E_VFINT_ICR0_ENA1_LINK_STAT_CHANGE_MASK;
+ I40E_WRITE_REG(hw, I40E_VFINT_ICR0_ENA1, val);
+
+ I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
+ I40E_VFINT_DYN_CTL01_INTENA_MASK |
+ I40E_VFINT_DYN_CTL01_CLEARPBA_MASK |
+ I40E_VFINT_DYN_CTL01_ITR_INDX_MASK);
+
+ I40EVF_WRITE_FLUSH(hw);
+}
+
static int
i40evf_reset_vf(struct i40e_hw *hw)
{
@@ -1115,6 +1169,8 @@ i40evf_init_vf(struct rte_eth_dev *dev)
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
struct ether_addr *p_mac_addr;
+ uint16_t interval =
+ i40e_calc_itr_interval(I40E_QUEUE_ITR_INTERVAL_MAX);
vf->adapter = I40E_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
vf->dev_data = dev->data;
@@ -1195,6 +1251,16 @@ i40evf_init_vf(struct rte_eth_dev *dev)
else
eth_random_addr(hw->mac.addr); /* Generate a random one */
+ /* If the PF host is not DPDK, set the interval of ITR0 to max*/
+ if (vf->version_major != I40E_DPDK_VERSION_MAJOR) {
+ I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
+ (I40E_ITR_INDEX_DEFAULT <<
+ I40E_VFINT_DYN_CTL0_ITR_INDX_SHIFT) |
+ (interval <<
+ I40E_VFINT_DYN_CTL0_INTERVAL_SHIFT));
+ I40EVF_WRITE_FLUSH(hw);
+ }
+
return 0;
err_alloc:
@@ -1223,11 +1289,142 @@ i40evf_uninit_vf(struct rte_eth_dev *dev)
return 0;
}
+static void
+i40evf_handle_pf_event(__rte_unused struct rte_eth_dev *dev,
+ uint8_t *msg,
+ __rte_unused uint16_t msglen)
+{
+ struct i40e_virtchnl_pf_event *pf_msg =
+ (struct i40e_virtchnl_pf_event *)msg;
+
+ switch (pf_msg->event) {
+ case I40E_VIRTCHNL_EVENT_RESET_IMPENDING:
+ PMD_DRV_LOG(DEBUG, "VIRTCHNL_EVENT_RESET_IMPENDING event\n");
+ _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_RESET);
+ break;
+ case I40E_VIRTCHNL_EVENT_LINK_CHANGE:
+ PMD_DRV_LOG(DEBUG, "VIRTCHNL_EVENT_LINK_CHANGE event\n");
+ break;
+ case I40E_VIRTCHNL_EVENT_PF_DRIVER_CLOSE:
+ PMD_DRV_LOG(DEBUG, "VIRTCHNL_EVENT_PF_DRIVER_CLOSE event\n");
+ break;
+ default:
+ PMD_DRV_LOG(ERR, " unknown event received %u", pf_msg->event);
+ break;
+ }
+}
+
+static void
+i40evf_handle_aq_msg(struct rte_eth_dev *dev)
+{
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
+ struct i40e_arq_event_info info;
+ struct i40e_virtchnl_msg *v_msg;
+ uint16_t pending, opcode;
+ int ret;
+
+ info.buf_len = I40E_AQ_BUF_SZ;
+ if (!vf->aq_resp) {
+ PMD_DRV_LOG(ERR, "Buffer for adminq resp should not be NULL");
+ return;
+ }
+ info.msg_buf = vf->aq_resp;
+ v_msg = (struct i40e_virtchnl_msg *)&info.desc;
+
+ pending = 1;
+ while (pending) {
+ ret = i40e_clean_arq_element(hw, &info, &pending);
+
+ if (ret != I40E_SUCCESS) {
+ PMD_DRV_LOG(INFO, "Failed to read msg from AdminQ,"
+ "ret: %d", ret);
+ break;
+ }
+ opcode = rte_le_to_cpu_16(info.desc.opcode);
+
+ switch (opcode) {
+ case i40e_aqc_opc_send_msg_to_vf:
+ if (v_msg->v_opcode == I40E_VIRTCHNL_OP_EVENT)
+ /* process event*/
+ i40evf_handle_pf_event(dev, info.msg_buf,
+ info.msg_len);
+ else {
+ /* read message and it's expected one */
+ if (v_msg->v_opcode == vf->pend_cmd) {
+ vf->cmd_retval = v_msg->v_retval;
+ /* prevent compiler reordering */
+ rte_compiler_barrier();
+ _clear_cmd(vf);
+ } else
+ PMD_DRV_LOG(ERR, "command mismatch,"
+ "expect %u, get %u",
+ vf->pend_cmd, v_msg->v_opcode);
+ PMD_DRV_LOG(DEBUG, "adminq response is received,"
+ " opcode = %d\n", v_msg->v_opcode);
+ }
+ break;
+ default:
+ PMD_DRV_LOG(ERR, "Request %u is not supported yet",
+ opcode);
+ break;
+ }
+ }
+}
+
+/**
+ * Interrupt handler triggered by NIC for handling
+ * specific interrupt. Only adminq interrupt is processed in VF.
+ *
+ * @param handle
+ * Pointer to interrupt handle.
+ * @param param
+ * The address of parameter (struct rte_eth_dev *) regsitered before.
+ *
+ * @return
+ * void
+ */
+static void
+i40evf_dev_interrupt_handler(__rte_unused struct rte_intr_handle *handle,
+ void *param)
+{
+ struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint32_t icr0;
+
+ i40evf_disable_irq0(hw);
+
+ /* read out interrupt causes */
+ icr0 = I40E_READ_REG(hw, I40E_VFINT_ICR01);
+
+ /* No interrupt event indicated */
+ if (!(icr0 & I40E_VFINT_ICR01_INTEVENT_MASK)) {
+ PMD_DRV_LOG(DEBUG, "No interrupt event, nothing to do\n");
+ goto done;
+ }
+
+ if (icr0 & I40E_VFINT_ICR01_ADMINQ_MASK) {
+ PMD_DRV_LOG(DEBUG, "ICR01_ADMINQ is reported\n");
+ i40evf_handle_aq_msg(dev);
+ }
+
+ /* Link Status Change interrupt */
+ if (icr0 & I40E_VFINT_ICR01_LINK_STAT_CHANGE_MASK)
+ PMD_DRV_LOG(DEBUG, "LINK_STAT_CHANGE is reported,"
+ " do nothing\n");
+
+done:
+ i40evf_enable_irq0(hw);
+ rte_intr_enable(&(dev->pci_dev->intr_handle));
+}
+
+
static int
i40evf_dev_init(struct rte_eth_dev *eth_dev)
{
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(\
eth_dev->data->dev_private);
+ struct rte_pci_device *pci_dev = eth_dev->pci_dev;
PMD_INIT_FUNC_TRACE();
@@ -1262,6 +1459,16 @@ i40evf_dev_init(struct rte_eth_dev *eth_dev)
return -1;
}
+ /* register callback func to eal lib */
+ rte_intr_callback_register(&(pci_dev->intr_handle),
+ i40evf_dev_interrupt_handler, (void *)eth_dev);
+
+ /* enable uio intr after callback register */
+ rte_intr_enable(&(pci_dev->intr_handle));
+
+ /* configure and enable device interrupt */
+ i40evf_enable_irq0(hw);
+
/* copy mac addr */
eth_dev->data->mac_addrs = rte_zmalloc("i40evf_mac",
ETHER_ADDR_LEN, 0);
@@ -1639,7 +1846,8 @@ i40evf_enable_queues_intr(struct rte_eth_dev *dev)
I40E_WRITE_REG(hw,
I40E_VFINT_DYN_CTL01,
I40E_VFINT_DYN_CTL01_INTENA_MASK |
- I40E_VFINT_DYN_CTL01_CLEARPBA_MASK);
+ I40E_VFINT_DYN_CTL01_CLEARPBA_MASK |
+ I40E_VFINT_DYN_CTL01_ITR_INDX_MASK);
I40EVF_WRITE_FLUSH(hw);
return;
}
@@ -1650,11 +1858,10 @@ i40evf_enable_queues_intr(struct rte_eth_dev *dev)
I40E_VFINT_DYN_CTLN1(I40EVF_VSI_DEFAULT_MSIX_INTR - 1),
I40E_VFINT_DYN_CTLN1_INTENA_MASK |
I40E_VFINT_DYN_CTLN_CLEARPBA_MASK);
- else
- /* To support Linux PF host */
- I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
- I40E_VFINT_DYN_CTL01_INTENA_MASK |
- I40E_VFINT_DYN_CTL01_CLEARPBA_MASK);
+ /* If host driver is kernel driver, do nothing.
+ * Interrupt 0 is used for rx packets, but don't set I40E_VFINT_DYN_CTL01,
+ * because it is already done in i40evf_enable_irq0.
+ */
I40EVF_WRITE_FLUSH(hw);
}
@@ -1667,7 +1874,8 @@ i40evf_disable_queues_intr(struct rte_eth_dev *dev)
struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
if (!rte_intr_allow_others(intr_handle)) {
- I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01, 0);
+ I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
+ I40E_VFINT_DYN_CTL01_ITR_INDX_MASK);
I40EVF_WRITE_FLUSH(hw);
return;
}
@@ -1677,8 +1885,10 @@ i40evf_disable_queues_intr(struct rte_eth_dev *dev)
I40E_VFINT_DYN_CTLN1(I40EVF_VSI_DEFAULT_MSIX_INTR
- 1),
0);
- else
- I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01, 0);
+ /* If host driver is kernel driver, do nothing.
+ * Interrupt 0 is used for rx packets, but don't zero I40E_VFINT_DYN_CTL01,
+ * because interrupt 0 is also used for adminq processing.
+ */
I40EVF_WRITE_FLUSH(hw);
}
@@ -1802,10 +2012,6 @@ i40evf_dev_start(struct rte_eth_dev *dev)
goto err_mac;
}
- /* vf don't allow intr except for rxq intr */
- if (dev->data->dev_conf.intr_conf.rxq != 0)
- rte_intr_enable(intr_handle);
-
i40evf_enable_queues_intr(dev);
return 0;
@@ -1997,12 +2203,20 @@ static void
i40evf_dev_close(struct rte_eth_dev *dev)
{
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct rte_pci_device *pci_dev = dev->pci_dev;
i40evf_dev_stop(dev);
hw->adapter_stopped = 1;
i40e_dev_free_queues(dev);
i40evf_reset_vf(hw);
i40e_shutdown_adminq(hw);
+ /* disable uio intr before callback unregister */
+ rte_intr_disable(&(pci_dev->intr_handle));
+
+ /* unregister callback func from eal lib */
+ rte_intr_callback_unregister(&(pci_dev->intr_handle),
+ i40evf_dev_interrupt_handler, (void *)dev);
+ i40evf_disable_irq0(hw);
}
static int
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index e2893ba..0c81435 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -2663,6 +2663,7 @@ rte_eth_tx_burst(uint8_t port_id, uint16_t queue_id,
enum rte_eth_event_type {
RTE_ETH_EVENT_UNKNOWN, /**< unknown event type */
RTE_ETH_EVENT_INTR_LSC, /**< lsc interrupt event */
+ RTE_ETH_EVENT_INTR_RESET, /**< reset interrupt event */
RTE_ETH_EVENT_MAX /**< max value of this enum */
};
--
2.4.0
^ permalink raw reply [flat|nested] 42+ messages in thread* [dpdk-dev] [PATCH v6 0/2] i40evf: pf reset event report
2016-03-10 3:41 ` [dpdk-dev] [PATCH v5 0/2] i40evf: pf reset event report Jingjing Wu
2016-03-10 3:41 ` [dpdk-dev] [PATCH v5 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
2016-03-10 3:41 ` [dpdk-dev] [PATCH v5 2/2] i40evf: support to report pf reset event Jingjing Wu
@ 2016-03-15 1:59 ` Jingjing Wu
2016-03-15 1:59 ` [dpdk-dev] [PATCH v6 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
` (2 more replies)
2 siblings, 3 replies; 42+ messages in thread
From: Jingjing Wu @ 2016-03-15 1:59 UTC (permalink / raw)
To: bruce.richardson; +Cc: dev, jingjing.wu, helin.zhang
v6 changes:
- rebase on latest dpdk-next-net/rel_16_04 branch (commit 94d8f4bf963a)
- fix complie issue
v5 changes:
- doc rewording and format fixing.
v4 changes:
- rebase on latest dpdk-next-net/rel_16_04 branch (commit 0f9564a0e4f2)
v3 changes:
- commit log doc rewording.
- rebase on latest dpdk-next-net/rel_16_04 branch.
- remove few useless line.
- adjust interval and increase times for waiting pf msg
v2 changes:
- remove the change on vf reset status checking
- add pf event report support in release note
When Linux PF and DPDK VF are used for i40e PMD, In case of PF
reset, interrupt request will go via adminq event, VF need be
informed, a callback mechanism is introduced by VF. This will
allow VF to invoke callback when reset happens.
Users can register a callback for this interrupt event like:
rte_eth_dev_callback_register(portid,
RTE_ETH_EVENT_INTR_RESET,
reset_event_callback,
arg);
Jingjing Wu (2):
i40evf: allocate virtchnl cmd buffer for each vf
i40evf: support to report pf reset event
doc/guides/rel_notes/release_16_04.rst | 3 +
drivers/net/i40e/i40e_ethdev.h | 2 +
drivers/net/i40e/i40e_ethdev_vf.c | 425 +++++++++++++++++++++++----------
lib/librte_ether/rte_ethdev.h | 1 +
4 files changed, 306 insertions(+), 125 deletions(-)
--
2.4.0
^ permalink raw reply [flat|nested] 42+ messages in thread* [dpdk-dev] [PATCH v6 1/2] i40evf: allocate virtchnl cmd buffer for each vf
2016-03-15 1:59 ` [dpdk-dev] [PATCH v6 0/2] i40evf: pf reset event report Jingjing Wu
@ 2016-03-15 1:59 ` Jingjing Wu
2016-03-15 1:59 ` [dpdk-dev] [PATCH v6 2/2] i40evf: support to report pf reset event Jingjing Wu
2016-03-22 15:13 ` [dpdk-dev] [PATCH v6 0/2] i40evf: pf reset event report Bruce Richardson
2 siblings, 0 replies; 42+ messages in thread
From: Jingjing Wu @ 2016-03-15 1:59 UTC (permalink / raw)
To: bruce.richardson; +Cc: dev, jingjing.wu, helin.zhang
Currently, i40evf PMD uses a global static buffer to send virtchnl
command to host driver. It is shared by multi VFs.
This patch changed to allocate virtchnl cmd buffer for each VF.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
---
drivers/net/i40e/i40e_ethdev.h | 2 +
drivers/net/i40e/i40e_ethdev_vf.c | 180 +++++++++++++++-----------------------
2 files changed, 72 insertions(+), 110 deletions(-)
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index 1c75672..b641882 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -500,7 +500,9 @@ struct i40e_vf {
bool link_up;
bool vf_reset;
volatile uint32_t pend_cmd; /* pending command not finished yet */
+ uint32_t cmd_retval; /* return value of the cmd response from PF */
u16 pend_msg; /* flags indicates events from pf not handled yet */
+ uint8_t *aq_resp; /* buffer to store the adminq response from PF */
/* VSI info */
struct i40e_virtchnl_vf_resource *vf_res; /* All VSIs */
diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
index 6b7b350..7944ccc 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -103,9 +103,6 @@ enum i40evf_aq_result {
I40EVF_MSG_CMD, /* Read async command result */
};
-/* A share buffer to store the command result from PF driver */
-static uint8_t cmd_result_buffer[I40E_AQ_BUF_SZ];
-
static int i40evf_dev_configure(struct rte_eth_dev *dev);
static int i40evf_dev_start(struct rte_eth_dev *dev);
static void i40evf_dev_stop(struct rte_eth_dev *dev);
@@ -224,31 +221,37 @@ static const struct eth_dev_ops i40evf_eth_dev_ops = {
};
/*
- * Parse admin queue message.
- *
- * return value:
- * < 0: meet error
- * 0: read sys msg
- * > 0: read cmd result
+ * Read data in admin queue to get msg from pf driver
*/
static enum i40evf_aq_result
-i40evf_parse_pfmsg(struct i40e_vf *vf,
- struct i40e_arq_event_info *event,
- struct i40evf_arq_msg_info *data)
+i40evf_read_pfmsg(struct rte_eth_dev *dev, struct i40evf_arq_msg_info *data)
{
- enum i40e_virtchnl_ops opcode = (enum i40e_virtchnl_ops)\
- rte_le_to_cpu_32(event->desc.cookie_high);
- enum i40e_status_code retval = (enum i40e_status_code)\
- rte_le_to_cpu_32(event->desc.cookie_low);
- enum i40evf_aq_result ret = I40EVF_MSG_CMD;
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
+ struct i40e_arq_event_info event;
+ enum i40e_virtchnl_ops opcode;
+ enum i40e_status_code retval;
+ int ret;
+ enum i40evf_aq_result result = I40EVF_MSG_NON;
+
+ event.buf_len = data->buf_len;
+ event.msg_buf = data->msg;
+ ret = i40e_clean_arq_element(hw, &event, NULL);
+ /* Can't read any msg from adminQ */
+ if (ret) {
+ if (ret != I40E_ERR_ADMIN_QUEUE_NO_WORK)
+ result = I40EVF_MSG_ERR;
+ return result;
+ }
+ opcode = (enum i40e_virtchnl_ops)rte_le_to_cpu_32(event.desc.cookie_high);
+ retval = (enum i40e_status_code)rte_le_to_cpu_32(event.desc.cookie_low);
/* pf sys event */
if (opcode == I40E_VIRTCHNL_OP_EVENT) {
struct i40e_virtchnl_pf_event *vpe =
- (struct i40e_virtchnl_pf_event *)event->msg_buf;
+ (struct i40e_virtchnl_pf_event *)event.msg_buf;
- /* Initialize ret to sys event */
- ret = I40EVF_MSG_SYS;
+ result = I40EVF_MSG_SYS;
switch (vpe->event) {
case I40E_VIRTCHNL_EVENT_LINK_CHANGE:
vf->link_up =
@@ -273,74 +276,17 @@ i40evf_parse_pfmsg(struct i40e_vf *vf,
}
} else {
/* async reply msg on command issued by vf previously */
- ret = I40EVF_MSG_CMD;
+ result = I40EVF_MSG_CMD;
/* Actual data length read from PF */
- data->msg_len = event->msg_len;
+ data->msg_len = event.msg_len;
}
- /* fill the ops and result to notify VF */
+
data->result = retval;
data->ops = opcode;
- return ret;
-}
-
-/*
- * Read data in admin queue to get msg from pf driver
- */
-static enum i40evf_aq_result
-i40evf_read_pfmsg(struct rte_eth_dev *dev, struct i40evf_arq_msg_info *data)
-{
- struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
- struct i40e_arq_event_info event;
- int ret;
- enum i40evf_aq_result result = I40EVF_MSG_NON;
-
- event.buf_len = data->buf_len;
- event.msg_buf = data->msg;
- ret = i40e_clean_arq_element(hw, &event, NULL);
- /* Can't read any msg from adminQ */
- if (ret) {
- if (ret == I40E_ERR_ADMIN_QUEUE_NO_WORK)
- result = I40EVF_MSG_NON;
- else
- result = I40EVF_MSG_ERR;
- return result;
- }
-
- /* Parse the event */
- result = i40evf_parse_pfmsg(vf, &event, data);
-
return result;
}
-/*
- * Polling read until command result return from pf driver or meet error.
- */
-static int
-i40evf_wait_cmd_done(struct rte_eth_dev *dev,
- struct i40evf_arq_msg_info *data)
-{
- int i = 0;
- enum i40evf_aq_result ret;
-
-#define MAX_TRY_TIMES 20
-#define ASQ_DELAY_MS 100
- do {
- /* Delay some time first */
- rte_delay_ms(ASQ_DELAY_MS);
- ret = i40evf_read_pfmsg(dev, data);
- if (ret == I40EVF_MSG_CMD)
- return 0;
- else if (ret == I40EVF_MSG_ERR)
- return -1;
-
- /* If don't read msg or read sys event, continue */
- } while(i++ < MAX_TRY_TIMES);
-
- return -1;
-}
-
/**
* clear current command. Only call in case execute
* _atomic_set_cmd successfully.
@@ -367,13 +313,18 @@ _atomic_set_cmd(struct i40e_vf *vf, enum i40e_virtchnl_ops ops)
return !ret;
}
+#define MAX_TRY_TIMES 200
+#define ASQ_DELAY_MS 10
+
static int
i40evf_execute_vf_cmd(struct rte_eth_dev *dev, struct vf_cmd_info *args)
{
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
- int err = -1;
struct i40evf_arq_msg_info info;
+ enum i40evf_aq_result ret;
+ int err = -1;
+ int i = 0;
if (_atomic_set_cmd(vf, args->ops))
return -1;
@@ -391,19 +342,21 @@ i40evf_execute_vf_cmd(struct rte_eth_dev *dev, struct vf_cmd_info *args)
return err;
}
- err = i40evf_wait_cmd_done(dev, &info);
- /* read message and it's expected one */
- if (!err && args->ops == info.ops)
- _clear_cmd(vf);
- else if (err) {
- PMD_DRV_LOG(ERR, "Failed to read message from AdminQ");
- _clear_cmd(vf);
- }
- else if (args->ops != info.ops)
- PMD_DRV_LOG(ERR, "command mismatch, expect %u, get %u",
- args->ops, info.ops);
+ do {
+ ret = i40evf_read_pfmsg(dev, &info);
+ if (ret == I40EVF_MSG_CMD) {
+ err = 0;
+ break;
+ } else if (ret == I40EVF_MSG_ERR) {
+ err = -1;
+ break;
+ }
+ rte_delay_ms(ASQ_DELAY_MS);
+ /* If don't read msg or read sys event, continue */
+ } while (i++ < MAX_TRY_TIMES);
+ _clear_cmd(vf);
- return err | info.result;
+ return err | vf->cmd_retval;
}
/*
@@ -423,7 +376,7 @@ i40evf_check_api_version(struct rte_eth_dev *dev)
args.ops = I40E_VIRTCHNL_OP_VERSION;
args.in_args = (uint8_t *)&version;
args.in_args_size = sizeof(version);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -461,7 +414,7 @@ i40evf_get_vf_resource(struct rte_eth_dev *dev)
uint32_t caps, len;
args.ops = I40E_VIRTCHNL_OP_GET_VF_RESOURCES;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
if (PF_IS_V11(vf)) {
caps = I40E_VIRTCHNL_VF_OFFLOAD_L2 |
@@ -514,7 +467,7 @@ i40evf_config_promisc(struct rte_eth_dev *dev,
args.ops = I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE;
args.in_args = (uint8_t *)&promisc;
args.in_args_size = sizeof(promisc);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -541,7 +494,7 @@ i40evf_config_vlan_offload(struct rte_eth_dev *dev,
args.ops = (enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_CFG_VLAN_OFFLOAD;
args.in_args = (uint8_t *)&offload;
args.in_args_size = sizeof(offload);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -572,7 +525,7 @@ i40evf_config_vlan_pvid(struct rte_eth_dev *dev,
args.ops = (enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_CFG_VLAN_PVID;
args.in_args = (uint8_t *)&tpid_info;
args.in_args_size = sizeof(tpid_info);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -651,7 +604,7 @@ i40evf_configure_vsi_queues(struct rte_eth_dev *dev)
args.ops = I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES;
args.in_args = (uint8_t *)vc_vqci;
args.in_args_size = size;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
ret = i40evf_execute_vf_cmd(dev, &args);
if (ret)
@@ -704,7 +657,7 @@ i40evf_configure_vsi_queues_ext(struct rte_eth_dev *dev)
(enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES_EXT;
args.in_args = (uint8_t *)vc_vqcei;
args.in_args_size = size;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
ret = i40evf_execute_vf_cmd(dev, &args);
if (ret)
@@ -766,7 +719,7 @@ i40evf_config_irq_map(struct rte_eth_dev *dev)
args.ops = I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP;
args.in_args = (u8 *)cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -797,7 +750,7 @@ i40evf_switch_queue(struct rte_eth_dev *dev, bool isrx, uint16_t qid,
args.ops = I40E_VIRTCHNL_OP_DISABLE_QUEUES;
args.in_args = (u8 *)&queue_select;
args.in_args_size = sizeof(queue_select);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -892,7 +845,7 @@ i40evf_add_mac_addr(struct rte_eth_dev *dev,
args.ops = I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS;
args.in_args = cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -933,7 +886,7 @@ i40evf_del_mac_addr(struct rte_eth_dev *dev, uint32_t index)
args.ops = I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS;
args.in_args = cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -955,7 +908,7 @@ i40evf_update_stats(struct rte_eth_dev *dev, struct i40e_eth_stats **pstats)
args.ops = I40E_VIRTCHNL_OP_GET_STATS;
args.in_args = (u8 *)&q_stats;
args.in_args_size = sizeof(q_stats);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -1049,7 +1002,7 @@ i40evf_add_vlan(struct rte_eth_dev *dev, uint16_t vlanid)
args.ops = I40E_VIRTCHNL_OP_ADD_VLAN;
args.in_args = (u8 *)&cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -1076,7 +1029,7 @@ i40evf_del_vlan(struct rte_eth_dev *dev, uint16_t vlanid)
args.ops = I40E_VIRTCHNL_OP_DEL_VLAN;
args.in_args = (u8 *)&cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -1088,6 +1041,7 @@ i40evf_del_vlan(struct rte_eth_dev *dev, uint16_t vlanid)
static int
i40evf_get_link_status(struct rte_eth_dev *dev, struct rte_eth_link *link)
{
+ struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
int err;
struct vf_cmd_info args;
struct rte_eth_link *new_link;
@@ -1095,7 +1049,7 @@ i40evf_get_link_status(struct rte_eth_dev *dev, struct rte_eth_link *link)
args.ops = (enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_GET_LINK_STAT;
args.in_args = NULL;
args.in_args_size = 0;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err) {
@@ -1190,7 +1144,6 @@ i40evf_init_vf(struct rte_eth_dev *dev)
goto err;
}
-
/* Reset VF and wait until it's complete */
if (i40evf_reset_vf(hw)) {
PMD_INIT_LOG(ERR, "reset NIC failed");
@@ -1208,6 +1161,11 @@ i40evf_init_vf(struct rte_eth_dev *dev)
PMD_INIT_LOG(ERR, "init_adminq failed");
return -1;
}
+ vf->aq_resp = rte_zmalloc("vf_aq_resp", I40E_AQ_BUF_SZ, 0);
+ if (!vf->aq_resp) {
+ PMD_INIT_LOG(ERR, "unable to allocate vf_aq_resp memory");
+ goto err_aq;
+ }
if (i40evf_check_api_version(dev) != 0) {
PMD_INIT_LOG(ERR, "check_api version failed");
goto err_aq;
@@ -1272,6 +1230,8 @@ i40evf_uninit_vf(struct rte_eth_dev *dev)
i40evf_dev_close(dev);
rte_free(vf->vf_res);
vf->vf_res = NULL;
+ rte_free(vf->aq_resp);
+ vf->aq_resp = NULL;
return 0;
}
@@ -1838,7 +1798,7 @@ i40evf_add_del_all_mac_addr(struct rte_eth_dev *dev, bool add)
I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS;
args.in_args = (uint8_t *)list;
args.in_args_size = len;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
--
2.4.0
^ permalink raw reply [flat|nested] 42+ messages in thread* [dpdk-dev] [PATCH v6 2/2] i40evf: support to report pf reset event
2016-03-15 1:59 ` [dpdk-dev] [PATCH v6 0/2] i40evf: pf reset event report Jingjing Wu
2016-03-15 1:59 ` [dpdk-dev] [PATCH v6 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
@ 2016-03-15 1:59 ` Jingjing Wu
2016-03-22 15:13 ` [dpdk-dev] [PATCH v6 0/2] i40evf: pf reset event report Bruce Richardson
2 siblings, 0 replies; 42+ messages in thread
From: Jingjing Wu @ 2016-03-15 1:59 UTC (permalink / raw)
To: bruce.richardson; +Cc: dev, jingjing.wu, helin.zhang
When Linux PF and DPDK VF are used for i40e PMD, In case of PF reset,
interrupt will go via adminq event, VF need be informed the event,
a callback mechanism is introduced by VF. This will allow VF to
invoke callback when reset happens.
Users can register a callback for this interrupt event like:
rte_eth_dev_callback_register(portid,
RTE_ETH_EVENT_INTR_RESET,
reset_event_callback,
arg);
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
---
doc/guides/rel_notes/release_16_04.rst | 3 +
drivers/net/i40e/i40e_ethdev_vf.c | 275 +++++++++++++++++++++++++++++----
lib/librte_ether/rte_ethdev.h | 1 +
3 files changed, 249 insertions(+), 30 deletions(-)
diff --git a/doc/guides/rel_notes/release_16_04.rst b/doc/guides/rel_notes/release_16_04.rst
index 5f9eb3e..c1a8456 100644
--- a/doc/guides/rel_notes/release_16_04.rst
+++ b/doc/guides/rel_notes/release_16_04.rst
@@ -139,6 +139,9 @@ This section should contain new features added in this release. Sample format:
Added support for linking multi-segment buffers together to
handle Jumbo packets.
+* **Added pf reset event reporting in i40e vf PMD driver.**
+
+
Resolved Issues
---------------
diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
index 7944ccc..1ce174c 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -74,8 +74,6 @@
#define I40EVF_BUSY_WAIT_DELAY 10
#define I40EVF_BUSY_WAIT_COUNT 50
#define MAX_RESET_WAIT_CNT 20
-/*ITR index for NOITR*/
-#define I40E_QINT_RQCTL_MSIX_INDX_NOITR 3
struct i40evf_arq_msg_info {
enum i40e_virtchnl_ops ops;
@@ -156,6 +154,9 @@ static int
i40evf_dev_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id);
static int
i40evf_dev_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id);
+static void i40evf_handle_pf_event(__rte_unused struct rte_eth_dev *dev,
+ uint8_t *msg,
+ uint16_t msglen);
/* Default hash key buffer for RSS */
static uint32_t rss_key_default[I40E_VFQF_HKEY_MAX_INDEX + 1];
@@ -342,19 +343,40 @@ i40evf_execute_vf_cmd(struct rte_eth_dev *dev, struct vf_cmd_info *args)
return err;
}
- do {
- ret = i40evf_read_pfmsg(dev, &info);
- if (ret == I40EVF_MSG_CMD) {
- err = 0;
- break;
- } else if (ret == I40EVF_MSG_ERR) {
- err = -1;
- break;
- }
- rte_delay_ms(ASQ_DELAY_MS);
- /* If don't read msg or read sys event, continue */
- } while (i++ < MAX_TRY_TIMES);
- _clear_cmd(vf);
+ switch (args->ops) {
+ case I40E_VIRTCHNL_OP_RESET_VF:
+ /*no need to process in this function */
+ break;
+ case I40E_VIRTCHNL_OP_VERSION:
+ case I40E_VIRTCHNL_OP_GET_VF_RESOURCES:
+ /* for init adminq commands, need to poll the response */
+ do {
+ ret = i40evf_read_pfmsg(dev, &info);
+ if (ret == I40EVF_MSG_CMD) {
+ err = 0;
+ break;
+ } else if (ret == I40EVF_MSG_ERR) {
+ err = -1;
+ break;
+ }
+ rte_delay_ms(ASQ_DELAY_MS);
+ /* If don't read msg or read sys event, continue */
+ } while (i++ < MAX_TRY_TIMES);
+ _clear_cmd(vf);
+ break;
+
+ default:
+ /* for other adminq in running time, waiting the cmd done flag */
+ do {
+ if (vf->pend_cmd == I40E_VIRTCHNL_OP_UNKNOWN) {
+ err = 0;
+ break;
+ }
+ rte_delay_ms(ASQ_DELAY_MS);
+ /* If don't read msg or read sys event, continue */
+ } while (i++ < MAX_TRY_TIMES);
+ break;
+ }
return err | vf->cmd_retval;
}
@@ -703,7 +725,7 @@ i40evf_config_irq_map(struct rte_eth_dev *dev)
map_info = (struct i40e_virtchnl_irq_map_info *)cmd_buffer;
map_info->num_vectors = 1;
- map_info->vecmap[0].rxitr_idx = I40E_QINT_RQCTL_MSIX_INDX_NOITR;
+ map_info->vecmap[0].rxitr_idx = I40E_ITR_INDEX_DEFAULT;
map_info->vecmap[0].vsi_id = vf->vsi_res->vsi_id;
/* Alway use default dynamic MSIX interrupt */
map_info->vecmap[0].vector_id = vector_id;
@@ -1083,6 +1105,38 @@ i40evf_dev_atomic_write_link_status(struct rte_eth_dev *dev,
return 0;
}
+/* Disable IRQ0 */
+static inline void
+i40evf_disable_irq0(struct i40e_hw *hw)
+{
+ /* Disable all interrupt types */
+ I40E_WRITE_REG(hw, I40E_VFINT_ICR0_ENA1, 0);
+ I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
+ I40E_VFINT_DYN_CTL01_ITR_INDX_MASK);
+ I40EVF_WRITE_FLUSH(hw);
+}
+
+/* Enable IRQ0 */
+static inline void
+i40evf_enable_irq0(struct i40e_hw *hw)
+{
+ /* Enable admin queue interrupt trigger */
+ uint32_t val;
+
+ i40evf_disable_irq0(hw);
+ val = I40E_READ_REG(hw, I40E_VFINT_ICR0_ENA1);
+ val |= I40E_VFINT_ICR0_ENA1_ADMINQ_MASK |
+ I40E_VFINT_ICR0_ENA1_LINK_STAT_CHANGE_MASK;
+ I40E_WRITE_REG(hw, I40E_VFINT_ICR0_ENA1, val);
+
+ I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
+ I40E_VFINT_DYN_CTL01_INTENA_MASK |
+ I40E_VFINT_DYN_CTL01_CLEARPBA_MASK |
+ I40E_VFINT_DYN_CTL01_ITR_INDX_MASK);
+
+ I40EVF_WRITE_FLUSH(hw);
+}
+
static int
i40evf_reset_vf(struct i40e_hw *hw)
{
@@ -1128,6 +1182,8 @@ i40evf_init_vf(struct rte_eth_dev *dev)
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
struct ether_addr *p_mac_addr;
+ uint16_t interval =
+ i40e_calc_itr_interval(I40E_QUEUE_ITR_INTERVAL_MAX);
vf->adapter = I40E_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
vf->dev_data = dev->data;
@@ -1208,6 +1264,16 @@ i40evf_init_vf(struct rte_eth_dev *dev)
else
eth_random_addr(hw->mac.addr); /* Generate a random one */
+ /* If the PF host is not DPDK, set the interval of ITR0 to max*/
+ if (vf->version_major != I40E_DPDK_VERSION_MAJOR) {
+ I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
+ (I40E_ITR_INDEX_DEFAULT <<
+ I40E_VFINT_DYN_CTL0_ITR_INDX_SHIFT) |
+ (interval <<
+ I40E_VFINT_DYN_CTL0_INTERVAL_SHIFT));
+ I40EVF_WRITE_FLUSH(hw);
+ }
+
return 0;
err_alloc:
@@ -1236,11 +1302,141 @@ i40evf_uninit_vf(struct rte_eth_dev *dev)
return 0;
}
+static void
+i40evf_handle_pf_event(__rte_unused struct rte_eth_dev *dev,
+ uint8_t *msg,
+ __rte_unused uint16_t msglen)
+{
+ struct i40e_virtchnl_pf_event *pf_msg =
+ (struct i40e_virtchnl_pf_event *)msg;
+
+ switch (pf_msg->event) {
+ case I40E_VIRTCHNL_EVENT_RESET_IMPENDING:
+ PMD_DRV_LOG(DEBUG, "VIRTCHNL_EVENT_RESET_IMPENDING event\n");
+ _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_RESET);
+ break;
+ case I40E_VIRTCHNL_EVENT_LINK_CHANGE:
+ PMD_DRV_LOG(DEBUG, "VIRTCHNL_EVENT_LINK_CHANGE event\n");
+ break;
+ case I40E_VIRTCHNL_EVENT_PF_DRIVER_CLOSE:
+ PMD_DRV_LOG(DEBUG, "VIRTCHNL_EVENT_PF_DRIVER_CLOSE event\n");
+ break;
+ default:
+ PMD_DRV_LOG(ERR, " unknown event received %u", pf_msg->event);
+ break;
+ }
+}
+
+static void
+i40evf_handle_aq_msg(struct rte_eth_dev *dev)
+{
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
+ struct i40e_arq_event_info info;
+ struct i40e_virtchnl_msg *v_msg;
+ uint16_t pending, opcode;
+ int ret;
+
+ info.buf_len = I40E_AQ_BUF_SZ;
+ if (!vf->aq_resp) {
+ PMD_DRV_LOG(ERR, "Buffer for adminq resp should not be NULL");
+ return;
+ }
+ info.msg_buf = vf->aq_resp;
+ v_msg = (struct i40e_virtchnl_msg *)&info.desc;
+
+ pending = 1;
+ while (pending) {
+ ret = i40e_clean_arq_element(hw, &info, &pending);
+
+ if (ret != I40E_SUCCESS) {
+ PMD_DRV_LOG(INFO, "Failed to read msg from AdminQ,"
+ "ret: %d", ret);
+ break;
+ }
+ opcode = rte_le_to_cpu_16(info.desc.opcode);
+
+ switch (opcode) {
+ case i40e_aqc_opc_send_msg_to_vf:
+ if (v_msg->v_opcode == I40E_VIRTCHNL_OP_EVENT)
+ /* process event*/
+ i40evf_handle_pf_event(dev, info.msg_buf,
+ info.msg_len);
+ else {
+ /* read message and it's expected one */
+ if (v_msg->v_opcode == vf->pend_cmd) {
+ vf->cmd_retval = v_msg->v_retval;
+ /* prevent compiler reordering */
+ rte_compiler_barrier();
+ _clear_cmd(vf);
+ } else
+ PMD_DRV_LOG(ERR, "command mismatch,"
+ "expect %u, get %u",
+ vf->pend_cmd, v_msg->v_opcode);
+ PMD_DRV_LOG(DEBUG, "adminq response is received,"
+ " opcode = %d\n", v_msg->v_opcode);
+ }
+ break;
+ default:
+ PMD_DRV_LOG(ERR, "Request %u is not supported yet",
+ opcode);
+ break;
+ }
+ }
+}
+
+/**
+ * Interrupt handler triggered by NIC for handling
+ * specific interrupt. Only adminq interrupt is processed in VF.
+ *
+ * @param handle
+ * Pointer to interrupt handle.
+ * @param param
+ * The address of parameter (struct rte_eth_dev *) regsitered before.
+ *
+ * @return
+ * void
+ */
+static void
+i40evf_dev_interrupt_handler(__rte_unused struct rte_intr_handle *handle,
+ void *param)
+{
+ struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint32_t icr0;
+
+ i40evf_disable_irq0(hw);
+
+ /* read out interrupt causes */
+ icr0 = I40E_READ_REG(hw, I40E_VFINT_ICR01);
+
+ /* No interrupt event indicated */
+ if (!(icr0 & I40E_VFINT_ICR01_INTEVENT_MASK)) {
+ PMD_DRV_LOG(DEBUG, "No interrupt event, nothing to do\n");
+ goto done;
+ }
+
+ if (icr0 & I40E_VFINT_ICR01_ADMINQ_MASK) {
+ PMD_DRV_LOG(DEBUG, "ICR01_ADMINQ is reported\n");
+ i40evf_handle_aq_msg(dev);
+ }
+
+ /* Link Status Change interrupt */
+ if (icr0 & I40E_VFINT_ICR01_LINK_STAT_CHANGE_MASK)
+ PMD_DRV_LOG(DEBUG, "LINK_STAT_CHANGE is reported,"
+ " do nothing\n");
+
+done:
+ i40evf_enable_irq0(hw);
+ rte_intr_enable(&dev->pci_dev->intr_handle);
+}
+
static int
i40evf_dev_init(struct rte_eth_dev *eth_dev)
{
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(\
eth_dev->data->dev_private);
+ struct rte_pci_device *pci_dev = eth_dev->pci_dev;
PMD_INIT_FUNC_TRACE();
@@ -1275,7 +1471,17 @@ i40evf_dev_init(struct rte_eth_dev *eth_dev)
return -1;
}
- /* allocate memory for mac addr storage */
+ /* register callback func to eal lib */
+ rte_intr_callback_register(&pci_dev->intr_handle,
+ i40evf_dev_interrupt_handler, (void *)eth_dev);
+
+ /* enable uio intr after callback register */
+ rte_intr_enable(&pci_dev->intr_handle);
+
+ /* configure and enable device interrupt */
+ i40evf_enable_irq0(hw);
+
+ /* copy mac addr */
eth_dev->data->mac_addrs = rte_zmalloc("i40evf_mac",
ETHER_ADDR_LEN * I40E_NUM_MACADDR_MAX,
0);
@@ -1654,7 +1860,8 @@ i40evf_enable_queues_intr(struct rte_eth_dev *dev)
I40E_WRITE_REG(hw,
I40E_VFINT_DYN_CTL01,
I40E_VFINT_DYN_CTL01_INTENA_MASK |
- I40E_VFINT_DYN_CTL01_CLEARPBA_MASK);
+ I40E_VFINT_DYN_CTL01_CLEARPBA_MASK |
+ I40E_VFINT_DYN_CTL01_ITR_INDX_MASK);
I40EVF_WRITE_FLUSH(hw);
return;
}
@@ -1665,11 +1872,11 @@ i40evf_enable_queues_intr(struct rte_eth_dev *dev)
I40E_VFINT_DYN_CTLN1(I40EVF_VSI_DEFAULT_MSIX_INTR - 1),
I40E_VFINT_DYN_CTLN1_INTENA_MASK |
I40E_VFINT_DYN_CTLN_CLEARPBA_MASK);
- else
- /* To support Linux PF host */
- I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
- I40E_VFINT_DYN_CTL01_INTENA_MASK |
- I40E_VFINT_DYN_CTL01_CLEARPBA_MASK);
+ /* If host driver is kernel driver, do nothing.
+ * Interrupt 0 is used for rx packets, but don't set
+ * I40E_VFINT_DYN_CTL01,
+ * because it is already done in i40evf_enable_irq0.
+ */
I40EVF_WRITE_FLUSH(hw);
}
@@ -1682,7 +1889,8 @@ i40evf_disable_queues_intr(struct rte_eth_dev *dev)
struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
if (!rte_intr_allow_others(intr_handle)) {
- I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01, 0);
+ I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01,
+ I40E_VFINT_DYN_CTL01_ITR_INDX_MASK);
I40EVF_WRITE_FLUSH(hw);
return;
}
@@ -1692,8 +1900,11 @@ i40evf_disable_queues_intr(struct rte_eth_dev *dev)
I40E_VFINT_DYN_CTLN1(I40EVF_VSI_DEFAULT_MSIX_INTR
- 1),
0);
- else
- I40E_WRITE_REG(hw, I40E_VFINT_DYN_CTL01, 0);
+ /* If host driver is kernel driver, do nothing.
+ * Interrupt 0 is used for rx packets, but don't zero
+ * I40E_VFINT_DYN_CTL01,
+ * because interrupt 0 is also used for adminq processing.
+ */
I40EVF_WRITE_FLUSH(hw);
}
@@ -1868,10 +2079,6 @@ i40evf_dev_start(struct rte_eth_dev *dev)
goto err_mac;
}
- /* vf don't allow intr except for rxq intr */
- if (dev->data->dev_conf.intr_conf.rxq != 0)
- rte_intr_enable(intr_handle);
-
i40evf_enable_queues_intr(dev);
return 0;
@@ -2060,12 +2267,20 @@ static void
i40evf_dev_close(struct rte_eth_dev *dev)
{
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct rte_pci_device *pci_dev = dev->pci_dev;
i40evf_dev_stop(dev);
hw->adapter_stopped = 1;
i40e_dev_free_queues(dev);
i40evf_reset_vf(hw);
i40e_shutdown_adminq(hw);
+ /* disable uio intr before callback unregister */
+ rte_intr_disable(&pci_dev->intr_handle);
+
+ /* unregister callback func from eal lib */
+ rte_intr_callback_unregister(&pci_dev->intr_handle,
+ i40evf_dev_interrupt_handler, (void *)dev);
+ i40evf_disable_irq0(hw);
}
static int
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index e2893ba..0c81435 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -2663,6 +2663,7 @@ rte_eth_tx_burst(uint8_t port_id, uint16_t queue_id,
enum rte_eth_event_type {
RTE_ETH_EVENT_UNKNOWN, /**< unknown event type */
RTE_ETH_EVENT_INTR_LSC, /**< lsc interrupt event */
+ RTE_ETH_EVENT_INTR_RESET, /**< reset interrupt event */
RTE_ETH_EVENT_MAX /**< max value of this enum */
};
--
2.4.0
^ permalink raw reply [flat|nested] 42+ messages in thread* Re: [dpdk-dev] [PATCH v6 0/2] i40evf: pf reset event report
2016-03-15 1:59 ` [dpdk-dev] [PATCH v6 0/2] i40evf: pf reset event report Jingjing Wu
2016-03-15 1:59 ` [dpdk-dev] [PATCH v6 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
2016-03-15 1:59 ` [dpdk-dev] [PATCH v6 2/2] i40evf: support to report pf reset event Jingjing Wu
@ 2016-03-22 15:13 ` Bruce Richardson
2 siblings, 0 replies; 42+ messages in thread
From: Bruce Richardson @ 2016-03-22 15:13 UTC (permalink / raw)
To: Jingjing Wu; +Cc: dev, helin.zhang
On Tue, Mar 15, 2016 at 09:59:38AM +0800, Jingjing Wu wrote:
> v6 changes:
> - rebase on latest dpdk-next-net/rel_16_04 branch (commit 94d8f4bf963a)
> - fix complie issue
>
> v5 changes:
> - doc rewording and format fixing.
>
> v4 changes:
> - rebase on latest dpdk-next-net/rel_16_04 branch (commit 0f9564a0e4f2)
>
> v3 changes:
> - commit log doc rewording.
> - rebase on latest dpdk-next-net/rel_16_04 branch.
> - remove few useless line.
> - adjust interval and increase times for waiting pf msg
>
> v2 changes:
> - remove the change on vf reset status checking
> - add pf event report support in release note
>
> When Linux PF and DPDK VF are used for i40e PMD, In case of PF
> reset, interrupt request will go via adminq event, VF need be
> informed, a callback mechanism is introduced by VF. This will
> allow VF to invoke callback when reset happens.
> Users can register a callback for this interrupt event like:
> rte_eth_dev_callback_register(portid,
> RTE_ETH_EVENT_INTR_RESET,
> reset_event_callback,
> arg);
>
>
> Jingjing Wu (2):
> i40evf: allocate virtchnl cmd buffer for each vf
> i40evf: support to report pf reset event
>
Applied to dpdk-next-net/rel_16_04.
/Bruce
^ permalink raw reply [flat|nested] 42+ messages in thread