From: Helin Zhang <helin.zhang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 10/29] i40e/base: fix up recent proxy and wol bits for X722_SUPPORT
Date: Fri, 15 Jan 2016 10:40:34 +0800 [thread overview]
Message-ID: <1452825653-623-11-git-send-email-helin.zhang@intel.com> (raw)
In-Reply-To: <1452825653-623-1-git-send-email-helin.zhang@intel.com>
The recently added opcodes should be available only with X722
SUPPORT, so move them into the #ifdef, and reorder these to be
in numerical order with the rest of the opcodes. Several structs
that were added are unnecessary, so they are removed here.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
---
drivers/net/i40e/base/i40e_adminq_cmd.h | 138 ++++++++++++--------------------
drivers/net/i40e/base/i40e_common.c | 14 ++--
2 files changed, 56 insertions(+), 96 deletions(-)
diff --git a/drivers/net/i40e/base/i40e_adminq_cmd.h b/drivers/net/i40e/base/i40e_adminq_cmd.h
index 1874653..ff6449c 100644
--- a/drivers/net/i40e/base/i40e_adminq_cmd.h
+++ b/drivers/net/i40e/base/i40e_adminq_cmd.h
@@ -139,6 +139,12 @@ enum i40e_admin_queue_opc {
i40e_aqc_opc_list_func_capabilities = 0x000A,
i40e_aqc_opc_list_dev_capabilities = 0x000B,
+#ifdef X722_SUPPORT
+ /* Proxy commands */
+ i40e_aqc_opc_set_proxy_config = 0x0104,
+ i40e_aqc_opc_set_ns_proxy_table_entry = 0x0105,
+
+#endif
/* LAA */
i40e_aqc_opc_mac_address_read = 0x0107,
i40e_aqc_opc_mac_address_write = 0x0108,
@@ -146,6 +152,12 @@ enum i40e_admin_queue_opc {
/* PXE */
i40e_aqc_opc_clear_pxe_mode = 0x0110,
+#ifdef X722_SUPPORT
+ /* WoL commands */
+ i40e_aqc_opc_set_wol_filter = 0x0120,
+ i40e_aqc_opc_get_wake_reason = 0x0121,
+
+#endif
/* internal switch commands */
i40e_aqc_opc_get_switch_config = 0x0200,
i40e_aqc_opc_add_statistics = 0x0201,
@@ -270,16 +282,8 @@ enum i40e_admin_queue_opc {
i40e_aqc_opc_set_rss_lut = 0x0B03,
i40e_aqc_opc_get_rss_key = 0x0B04,
i40e_aqc_opc_get_rss_lut = 0x0B05,
-
- /* WoL commands */
- i40e_aqc_opc_set_wol_filter = 0x0120,
- i40e_aqc_opc_get_wake_reason = 0x0121,
#endif
- /* Proxy commands */
- i40e_aqc_opc_set_proxy_config = 0x0104,
- i40e_aqc_opc_set_ns_proxy_table_entry = 0x0105,
-
/* Async Events */
i40e_aqc_opc_event_lan_overflow = 0x1001,
@@ -419,6 +423,7 @@ struct i40e_aqc_list_capabilities_element_resp {
#define I40E_AQ_CAP_ID_OS2BMC_CAP 0x0004
#define I40E_AQ_CAP_ID_FUNCTIONS_VALID 0x0005
#define I40E_AQ_CAP_ID_ALTERNATE_RAM 0x0006
+#define I40E_AQ_CAP_ID_WOL_AND_PROXY 0x0008
#define I40E_AQ_CAP_ID_SRIOV 0x0012
#define I40E_AQ_CAP_ID_VF 0x0013
#define I40E_AQ_CAP_ID_VMDQ 0x0014
@@ -567,6 +572,43 @@ struct i40e_aqc_clear_pxe {
I40E_CHECK_CMD_LENGTH(i40e_aqc_clear_pxe);
+#ifdef X722_SUPPORT
+/* Set WoL Filter (0x0120) */
+
+struct i40e_aqc_set_wol_filter {
+ __le16 filter_index;
+#define I40E_AQC_MAX_NUM_WOL_FILTERS 8
+ __le16 cmd_flags;
+#define I40E_AQC_SET_WOL_FILTER 0x8000
+#define I40E_AQC_SET_WOL_FILTER_NO_TCO_WOL 0x4000
+ __le16 valid_flags;
+#define I40E_AQC_SET_WOL_FILTER_ACTION_VALID 0x8000
+#define I40E_AQC_SET_WOL_FILTER_NO_TCO_ACTION_VALID 0x4000
+ u8 reserved[2];
+ __le32 address_high;
+ __le32 address_low;
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_set_wol_filter);
+
+/* Get Wake Reason (0x0121) */
+
+struct i40e_aqc_get_wake_reason_completion {
+ u8 reserved_1[2];
+ __le16 wake_reason;
+ u8 reserved_2[12];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_get_wake_reason_completion);
+
+struct i40e_aqc_set_wol_filter_data {
+ u8 filter[128];
+ u8 mask[16];
+};
+
+I40E_CHECK_STRUCT_LEN(0x90, i40e_aqc_set_wol_filter_data);
+
+#endif /* X722_SUPPORT */
/* Switch configuration commands (0x02xx) */
/* Used by many indirect commands that only pass an seid and a buffer in the
@@ -2426,84 +2468,4 @@ struct i40e_aqc_debug_modify_internals {
I40E_CHECK_CMD_LENGTH(i40e_aqc_debug_modify_internals);
-#ifdef X722_SUPPORT
-struct i40e_aqc_set_proxy_config {
- u8 reserved_1[4];
- u8 reserved_2[4];
- __le32 address_high;
- __le32 address_low;
-};
-
-I40E_CHECK_CMD_LENGTH(i40e_aqc_set_proxy_config);
-
-struct i40e_aqc_set_proxy_config_resp {
- u8 reserved[8];
- __le32 address_high;
- __le32 address_low;
-};
-
-I40E_CHECK_CMD_LENGTH(i40e_aqc_set_proxy_config_resp);
-
-struct i40e_aqc_set_ns_proxy_table_entry {
- u8 reserved_1[4];
- u8 reserved_2[4];
- __le32 address_high;
- __le32 address_low;
-};
-
-I40E_CHECK_CMD_LENGTH(i40e_aqc_set_ns_proxy_table_entry);
-
-struct i40e_aqc_set_ns_proxy_table_entry_resp {
- u8 reserved_1[4];
- u8 reserved_2[4];
- __le32 address_high;
- __le32 address_low;
-};
-
-I40E_CHECK_CMD_LENGTH(i40e_aqc_set_ns_proxy_table_entry_resp);
-
-struct i40e_aqc_set_wol_filter {
- __le16 filter_index;
-#define I40E_AQC_MAX_NUM_WOL_FILTERS 8
- __le16 cmd_flags;
-#define I40E_AQC_SET_WOL_FILTER 0x8000
-#define I40E_AQC_SET_WOL_FILTER_NO_TCO_WOL 0x4000
- __le16 valid_flags;
-#define I40E_AQC_SET_WOL_FILTER_ACTION_VALID 0x8000
-#define I40E_AQC_SET_WOL_FILTER_NO_TCO_ACTION_VALID 0x4000
- u8 reserved[2];
- __le32 address_high;
- __le32 address_low;
-};
-
-I40E_CHECK_CMD_LENGTH(i40e_aqc_set_wol_filter);
-
-struct i40e_aqc_set_wol_filter_resp {
- u8 reserved[8];
- __le32 address_high;
- __le32 address_low;
-};
-
-I40E_CHECK_CMD_LENGTH(i40e_aqc_set_wol_filter_resp);
-
-struct i40e_aqc_get_wol_wake_reason {
- u8 reserved[16];
-};
-
-I40E_CHECK_CMD_LENGTH(i40e_aqc_get_wol_wake_reason);
-
-struct i40e_aqc_get_wake_reason_completion {
- u8 reserved_1[2];
- __le16 wake_reason;
- u8 reserved_2[12];
-};
-
-I40E_CHECK_CMD_LENGTH(i40e_aqc_get_wake_reason_completion);
-
-struct i40e_aqc_set_wol_filter_data {
- u8 filter[128];
- u8 mask[16];
-};
-
-#endif
#endif /* _I40E_ADMINQ_CMD_H_ */
diff --git a/drivers/net/i40e/base/i40e_common.c b/drivers/net/i40e/base/i40e_common.c
index 67a5e21..cfe071b 100644
--- a/drivers/net/i40e/base/i40e_common.c
+++ b/drivers/net/i40e/base/i40e_common.c
@@ -5818,8 +5818,6 @@ enum i40e_status_code i40e_aq_set_arp_proxy_config(struct i40e_hw *hw,
struct i40e_asq_cmd_details *cmd_details)
{
struct i40e_aq_desc desc;
- struct i40e_aqc_set_proxy_config *cmd =
- (struct i40e_aqc_set_proxy_config *) &desc.params.raw;
enum i40e_status_code status;
if (!proxy_config)
@@ -5827,8 +5825,10 @@ enum i40e_status_code i40e_aq_set_arp_proxy_config(struct i40e_hw *hw,
i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_set_proxy_config);
- cmd->address_high = CPU_TO_LE32(I40E_HI_DWORD((u64)proxy_config));
- cmd->address_low = CPU_TO_LE32(I40E_LO_DWORD((u64)proxy_config));
+ desc.params.external.addr_high =
+ CPU_TO_LE32(I40E_HI_DWORD((u64)proxy_config));
+ desc.params.external.addr_low =
+ CPU_TO_LE32(I40E_LO_DWORD((u64)proxy_config));
status = i40e_asq_send_command(hw, &desc, proxy_config,
sizeof(struct i40e_aqc_arp_proxy_data),
@@ -5851,8 +5851,6 @@ enum i40e_status_code i40e_aq_set_ns_proxy_table_entry(struct i40e_hw *hw,
struct i40e_asq_cmd_details *cmd_details)
{
struct i40e_aq_desc desc;
- struct i40e_aqc_set_ns_proxy_table_entry *cmd =
- (struct i40e_aqc_set_ns_proxy_table_entry *) &desc.params.raw;
enum i40e_status_code status;
if (!ns_proxy_table_entry)
@@ -5861,9 +5859,9 @@ enum i40e_status_code i40e_aq_set_ns_proxy_table_entry(struct i40e_hw *hw,
i40e_fill_default_direct_cmd_desc(&desc,
i40e_aqc_opc_set_ns_proxy_table_entry);
- cmd->address_high =
+ desc.params.external.addr_high =
CPU_TO_LE32(I40E_HI_DWORD((u64)ns_proxy_table_entry));
- cmd->address_low =
+ desc.params.external.addr_low =
CPU_TO_LE32(I40E_LO_DWORD((u64)ns_proxy_table_entry));
status = i40e_asq_send_command(hw, &desc, ns_proxy_table_entry,
--
1.9.3
next prev parent reply other threads:[~2016-01-15 2:41 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-15 2:40 [dpdk-dev] [PATCH 00/29] i40e base driver update Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 01/29] i40e/base: use explicit cast from u16 to u8 Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 02/29] i40e/base: Acquire NVM, before issuing an AQ read nvm command Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 03/29] i40e/base: add hw flag for doing the SRCTL access using AQ for X722 Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 04/29] i40e/base: add changes in nvm read to support X722 Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 05/29] i40e/base: Limit DCB FW version checks to XL710/X710 devices Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 06/29] i40e/base: check for stopped admin queue Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 07/29] i40e/base: set aq count after memory allocation Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 08/29] i40e/base: clean event descriptor before use Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 09/29] i40e/base: add new device IDs and delete deprecated one Helin Zhang
2016-01-15 2:40 ` Helin Zhang [this message]
2016-01-15 2:40 ` [dpdk-dev] [PATCH 11/29] i40e/base: define function capabilities in only one place Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 12/29] i40e/base: Fix for PHY NVM interaction problem Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 13/29] i40e/base: set shared bit for multicast filters Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 14/29] i40e/base: add APIs to Add/remove port mirroring rules Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 15/29] i40e/base: add VEB stat control and remove L2 cloud filter Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 16/29] i40e/base: implement the API function for aq_set_switch_config Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 17/29] i40e/base: Add functions to blink led on Coppervale PHY Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 18/29] i40e/base: When in promisc mode apply promisc mode to Tx Traffic as well Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 19/29] i40e/base: Increase timeout when checking GLGEN_RSTAT_DEVSTATE bit Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 20/29] i40e/base: Save off VSI resource count when updating VSI Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 21/29] i40e/base: coding style fixes Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 22/29] i40e/base: use FW to read/write rx control registers Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 23/29] i40e/base: expose some registers to program parser, FD and RSS logic Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 24/29] i40e/base: Add a Virtchnl offload for RSS PCTYPE V2 Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 25/29] i40e/base: add AQ thermal sensor control struct Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 26/29] i40e/base: add/update structure and macro definitions Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 27/29] i40e: add base driver release info Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 28/29] i40e: add/remove new device IDs Helin Zhang
2016-01-15 2:40 ` [dpdk-dev] [PATCH 29/29] i40e: use rx control function for rx control registers Helin Zhang
2016-01-15 10:48 ` [dpdk-dev] [PATCH 00/29] i40e base driver update Bruce Richardson
2016-01-17 13:43 ` Zhang, Helin
2016-02-14 1:57 ` Wu, Jingjing
2016-02-18 6:29 ` [dpdk-dev] [PATCH v2 00/30] " Helin Zhang
2016-02-18 6:29 ` [dpdk-dev] [PATCH v2 01/30] i40e/base: use explicit cast from u16 to u8 Helin Zhang
2016-02-18 6:29 ` [dpdk-dev] [PATCH v2 02/30] i40e/base: acquire NVM, before issuing an AQ read nvm command Helin Zhang
2016-02-18 6:29 ` [dpdk-dev] [PATCH v2 03/30] i40e/base: add hw flag for SRCTL access using AQ for X722 Helin Zhang
2016-02-18 6:29 ` [dpdk-dev] [PATCH v2 04/30] i40e/base: add changes in nvm read to support X722 Helin Zhang
2016-02-18 6:29 ` [dpdk-dev] [PATCH v2 05/30] i40e/base: limit DCB FW version checks to XL710/X710 devices Helin Zhang
2016-02-18 6:29 ` [dpdk-dev] [PATCH v2 06/30] i40e/base: check for stopped admin queue Helin Zhang
2016-02-18 6:29 ` [dpdk-dev] [PATCH v2 07/30] i40e/base: set aq count after memory allocation Helin Zhang
2016-02-18 6:29 ` [dpdk-dev] [PATCH v2 08/30] i40e/base: clean event descriptor before use Helin Zhang
2016-02-18 6:29 ` [dpdk-dev] [PATCH v2 09/30] i40e/base: add new device IDs and delete deprecated one Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 10/30] i40e/base: fix up recent proxy and wol bits for X722_SUPPORT Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 11/30] i40e/base: define function capabilities in only one place Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 12/30] i40e/base: fix for PHY NVM interaction problem Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 13/30] i40e/base: set shared bit for multicast filters Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 14/30] i40e/base: add APIs to Add/remove port mirroring rules Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 15/30] i40e/base: add VEB stat control and remove L2 cloud filter Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 16/30] i40e/base: implement the API function for aq_set_switch_config Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 17/30] i40e/base: add functions to blink led on Coppervale PHY Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 18/30] i40e/base: apply promisc mode to Tx Traffic Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 19/30] i40e/base: increase timeout when checking GLGEN_RSTAT_DEVSTATE bit Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 20/30] i40e/base: save off VSI resource count when updating VSI Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 21/30] i40e/base: coding style fixes Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 22/30] i40e/base: use FW to read/write rx control registers Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 23/30] i40e/base: expose some registers to program parser, FD and RSS logic Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 24/30] i40e/base: add a Virtchnl offload for RSS PCTYPE V2 Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 25/30] i40e/base: add AQ thermal sensor control struct Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 26/30] i40e/base: add/update structure and macro definitions Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 27/30] i40e: add base driver release info Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 28/30] i40e: add/remove new device IDs Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 29/30] i40e: use rx control function for rx control registers Helin Zhang
2016-02-18 6:30 ` [dpdk-dev] [PATCH v2 30/30] i40evf: use base driver defined interface Helin Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452825653-623-11-git-send-email-helin.zhang@intel.com \
--to=helin.zhang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).