DPDK patches and discussions
 help / color / mirror / Atom feed
From: Helin Zhang <helin.zhang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 05/29] i40e/base: Limit DCB FW version checks to XL710/X710 devices
Date: Fri, 15 Jan 2016 10:40:29 +0800	[thread overview]
Message-ID: <1452825653-623-6-git-send-email-helin.zhang@intel.com> (raw)
In-Reply-To: <1452825653-623-1-git-send-email-helin.zhang@intel.com>

XL710/X710 devices requires FW version checks to properly handle
DCB configurations from the FW while other devices (e.g. X722)
do not, so limit these checks to XL710/X710 only.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
---
 drivers/net/i40e/base/i40e_dcb.c | 34 +++++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 13 deletions(-)

diff --git a/drivers/net/i40e/base/i40e_dcb.c b/drivers/net/i40e/base/i40e_dcb.c
index d71387f..26c344f 100644
--- a/drivers/net/i40e/base/i40e_dcb.c
+++ b/drivers/net/i40e/base/i40e_dcb.c
@@ -387,32 +387,40 @@ static void i40e_parse_cee_app_tlv(struct i40e_cee_feat_tlv *tlv,
 {
 	u16 length, typelength, offset = 0;
 	struct i40e_cee_app_prio *app;
-	u8 i, up, selector;
+	u8 i;
 
 	typelength = I40E_NTOHS(tlv->hdr.typelen);
 	length = (u16)((typelength & I40E_LLDP_TLV_LEN_MASK) >>
 		       I40E_LLDP_TLV_LEN_SHIFT);
 
-	dcbcfg->numapps = length/sizeof(*app);
+	dcbcfg->numapps = length / sizeof(*app);
 	if (!dcbcfg->numapps)
 		return;
 
 	for (i = 0; i < dcbcfg->numapps; i++) {
+		u8 up, selector;
+
 		app = (struct i40e_cee_app_prio *)(tlv->tlvinfo + offset);
 		for (up = 0; up < I40E_MAX_USER_PRIORITY; up++) {
 			if (app->prio_map & BIT(up))
 				break;
 		}
 		dcbcfg->app[i].priority = up;
+
 		/* Get Selector from lower 2 bits, and convert to IEEE */
 		selector = (app->upper_oui_sel & I40E_CEE_APP_SELECTOR_MASK);
-		if (selector == I40E_CEE_APP_SEL_ETHTYPE)
+		switch (selector) {
+		case I40E_CEE_APP_SEL_ETHTYPE:
 			dcbcfg->app[i].selector = I40E_APP_SEL_ETHTYPE;
-		else if (selector == I40E_CEE_APP_SEL_TCPIP)
+			break;
+		case I40E_CEE_APP_SEL_TCPIP:
 			dcbcfg->app[i].selector = I40E_APP_SEL_TCPIP;
-		else
+			break;
+		default:
 			/* Keep selector as it is for unknown types */
 			dcbcfg->app[i].selector = selector;
+		}
+
 		dcbcfg->app[i].protocolid = I40E_NTOHS(app->protocol);
 		/* Move to next app */
 		offset += sizeof(*app);
@@ -822,13 +830,15 @@ enum i40e_status_code i40e_get_dcb_config(struct i40e_hw *hw)
 	struct i40e_aqc_get_cee_dcb_cfg_resp cee_cfg;
 	struct i40e_aqc_get_cee_dcb_cfg_v1_resp cee_v1_cfg;
 
-	/* If Firmware version < v4.33 IEEE only */
-	if (((hw->aq.fw_maj_ver == 4) && (hw->aq.fw_min_ver < 33)) ||
-	    (hw->aq.fw_maj_ver < 4))
+	/* If Firmware version < v4.33 on X710/XL710, IEEE only */
+	if ((hw->mac.type == I40E_MAC_XL710) &&
+	    (((hw->aq.fw_maj_ver == 4) && (hw->aq.fw_min_ver < 33)) ||
+	      (hw->aq.fw_maj_ver < 4)))
 		return i40e_get_ieee_dcb_config(hw);
 
-	/* If Firmware version == v4.33 use old CEE struct */
-	if ((hw->aq.fw_maj_ver == 4) && (hw->aq.fw_min_ver == 33)) {
+	/* If Firmware version == v4.33 on X710/XL710, use old CEE struct */
+	if ((hw->mac.type == I40E_MAC_XL710) &&
+	    ((hw->aq.fw_maj_ver == 4) && (hw->aq.fw_min_ver == 33))) {
 		ret = i40e_aq_get_cee_dcb_config(hw, &cee_v1_cfg,
 						 sizeof(cee_v1_cfg), NULL);
 		if (ret == I40E_SUCCESS) {
@@ -1240,14 +1250,12 @@ enum i40e_status_code i40e_dcb_config_to_lldp(u8 *lldpmib, u16 *miblen,
 	u16 length, offset = 0, tlvid = I40E_TLV_ID_START;
 	enum i40e_status_code ret = I40E_SUCCESS;
 	struct i40e_lldp_org_tlv *tlv;
-	u16 type, typelength;
+	u16 typelength;
 
 	tlv = (struct i40e_lldp_org_tlv *)lldpmib;
 	while (1) {
 		i40e_add_dcb_tlv(tlv, dcbcfg, tlvid++);
 		typelength = I40E_NTOHS(tlv->typelength);
-		type = (u16)((typelength & I40E_LLDP_TLV_TYPE_MASK) >>
-				I40E_LLDP_TLV_TYPE_SHIFT);
 		length = (u16)((typelength & I40E_LLDP_TLV_LEN_MASK) >>
 				I40E_LLDP_TLV_LEN_SHIFT);
 		if (length)
-- 
1.9.3

  parent reply	other threads:[~2016-01-15  2:41 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-15  2:40 [dpdk-dev] [PATCH 00/29] i40e base driver update Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 01/29] i40e/base: use explicit cast from u16 to u8 Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 02/29] i40e/base: Acquire NVM, before issuing an AQ read nvm command Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 03/29] i40e/base: add hw flag for doing the SRCTL access using AQ for X722 Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 04/29] i40e/base: add changes in nvm read to support X722 Helin Zhang
2016-01-15  2:40 ` Helin Zhang [this message]
2016-01-15  2:40 ` [dpdk-dev] [PATCH 06/29] i40e/base: check for stopped admin queue Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 07/29] i40e/base: set aq count after memory allocation Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 08/29] i40e/base: clean event descriptor before use Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 09/29] i40e/base: add new device IDs and delete deprecated one Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 10/29] i40e/base: fix up recent proxy and wol bits for X722_SUPPORT Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 11/29] i40e/base: define function capabilities in only one place Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 12/29] i40e/base: Fix for PHY NVM interaction problem Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 13/29] i40e/base: set shared bit for multicast filters Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 14/29] i40e/base: add APIs to Add/remove port mirroring rules Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 15/29] i40e/base: add VEB stat control and remove L2 cloud filter Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 16/29] i40e/base: implement the API function for aq_set_switch_config Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 17/29] i40e/base: Add functions to blink led on Coppervale PHY Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 18/29] i40e/base: When in promisc mode apply promisc mode to Tx Traffic as well Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 19/29] i40e/base: Increase timeout when checking GLGEN_RSTAT_DEVSTATE bit Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 20/29] i40e/base: Save off VSI resource count when updating VSI Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 21/29] i40e/base: coding style fixes Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 22/29] i40e/base: use FW to read/write rx control registers Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 23/29] i40e/base: expose some registers to program parser, FD and RSS logic Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 24/29] i40e/base: Add a Virtchnl offload for RSS PCTYPE V2 Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 25/29] i40e/base: add AQ thermal sensor control struct Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 26/29] i40e/base: add/update structure and macro definitions Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 27/29] i40e: add base driver release info Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 28/29] i40e: add/remove new device IDs Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 29/29] i40e: use rx control function for rx control registers Helin Zhang
2016-01-15 10:48 ` [dpdk-dev] [PATCH 00/29] i40e base driver update Bruce Richardson
2016-01-17 13:43   ` Zhang, Helin
2016-02-14  1:57 ` Wu, Jingjing
2016-02-18  6:29 ` [dpdk-dev] [PATCH v2 00/30] " Helin Zhang
2016-02-18  6:29   ` [dpdk-dev] [PATCH v2 01/30] i40e/base: use explicit cast from u16 to u8 Helin Zhang
2016-02-18  6:29   ` [dpdk-dev] [PATCH v2 02/30] i40e/base: acquire NVM, before issuing an AQ read nvm command Helin Zhang
2016-02-18  6:29   ` [dpdk-dev] [PATCH v2 03/30] i40e/base: add hw flag for SRCTL access using AQ for X722 Helin Zhang
2016-02-18  6:29   ` [dpdk-dev] [PATCH v2 04/30] i40e/base: add changes in nvm read to support X722 Helin Zhang
2016-02-18  6:29   ` [dpdk-dev] [PATCH v2 05/30] i40e/base: limit DCB FW version checks to XL710/X710 devices Helin Zhang
2016-02-18  6:29   ` [dpdk-dev] [PATCH v2 06/30] i40e/base: check for stopped admin queue Helin Zhang
2016-02-18  6:29   ` [dpdk-dev] [PATCH v2 07/30] i40e/base: set aq count after memory allocation Helin Zhang
2016-02-18  6:29   ` [dpdk-dev] [PATCH v2 08/30] i40e/base: clean event descriptor before use Helin Zhang
2016-02-18  6:29   ` [dpdk-dev] [PATCH v2 09/30] i40e/base: add new device IDs and delete deprecated one Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 10/30] i40e/base: fix up recent proxy and wol bits for X722_SUPPORT Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 11/30] i40e/base: define function capabilities in only one place Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 12/30] i40e/base: fix for PHY NVM interaction problem Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 13/30] i40e/base: set shared bit for multicast filters Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 14/30] i40e/base: add APIs to Add/remove port mirroring rules Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 15/30] i40e/base: add VEB stat control and remove L2 cloud filter Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 16/30] i40e/base: implement the API function for aq_set_switch_config Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 17/30] i40e/base: add functions to blink led on Coppervale PHY Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 18/30] i40e/base: apply promisc mode to Tx Traffic Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 19/30] i40e/base: increase timeout when checking GLGEN_RSTAT_DEVSTATE bit Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 20/30] i40e/base: save off VSI resource count when updating VSI Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 21/30] i40e/base: coding style fixes Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 22/30] i40e/base: use FW to read/write rx control registers Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 23/30] i40e/base: expose some registers to program parser, FD and RSS logic Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 24/30] i40e/base: add a Virtchnl offload for RSS PCTYPE V2 Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 25/30] i40e/base: add AQ thermal sensor control struct Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 26/30] i40e/base: add/update structure and macro definitions Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 27/30] i40e: add base driver release info Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 28/30] i40e: add/remove new device IDs Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 29/30] i40e: use rx control function for rx control registers Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 30/30] i40evf: use base driver defined interface Helin Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1452825653-623-6-git-send-email-helin.zhang@intel.com \
    --to=helin.zhang@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).