[dpdk-dev] [PATCH 1/3] fm10k: enable FTAG based forwarding

[Wang Xiao W <xiao.w.wang@intel.com>]

This patch enables reading sglort info into mbuf for RX and inserting
an FTAG at the beginning of the packet for TX. The vlan_tci_outer field
selected from rte_mbuf structure for sglort is not used in fm10k now.
In FTAG based forwarding mode, the switch will forward packets according
to glort info in FTAG rather than mac and vlan table.

To activate this feature, user needs to turn ``CONFIG_RTE_LIBRTE_FM10K_FTAG_FWD``
to y in common_linuxapp or common_bsdapp. Currently this feature is supported
only on PF, because FM10K_PFVTCTL register is read-only for VF.

Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
---
 config/common_bsdapp               |  1 +
 config/common_linuxapp             |  1 +
 drivers/net/fm10k/fm10k_ethdev.c   |  8 ++++++++
 drivers/net/fm10k/fm10k_rxtx.c     | 17 +++++++++++++++++
 drivers/net/fm10k/fm10k_rxtx_vec.c |  9 +++++++++
 5 files changed, 36 insertions(+)

diff --git a/config/common_bsdapp b/config/common_bsdapp
index ed7c31c..451f81a 100644
--- a/config/common_bsdapp
+++ b/config/common_bsdapp
@@ -208,6 +208,7 @@ CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
 CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
 CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
 CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
+CONFIG_RTE_LIBRTE_FM10K_FTAG_FWD=n
 
 #
 # Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 74bc515..c928bce 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -207,6 +207,7 @@ CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
 CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
 CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
 CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
+CONFIG_RTE_LIBRTE_FM10K_FTAG_FWD=n
 
 #
 # Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
diff --git a/drivers/net/fm10k/fm10k_ethdev.c b/drivers/net/fm10k/fm10k_ethdev.c
index e4aed94..cc8317f 100644
--- a/drivers/net/fm10k/fm10k_ethdev.c
+++ b/drivers/net/fm10k/fm10k_ethdev.c
@@ -668,6 +668,14 @@ fm10k_dev_tx_init(struct rte_eth_dev *dev)
 			PMD_INIT_LOG(ERR, "failed to disable queue %d", i);
 			return -1;
 		}
+#ifdef RTE_LIBRTE_FM10K_FTAG_FWD
+		/* Enable use of FTAG bit in TX descriptor, PFVTCTL
+		 * register is read-only for VF.
+		 */
+		if (hw->mac.type == fm10k_mac_pf)
+			FM10K_WRITE_REG(hw, FM10K_PFVTCTL(i),
+					FM10K_PFVTCTL_FTAG_DESC_ENABLE);
+#endif
 
 		/* set location and size for descriptor ring */
 		FM10K_WRITE_REG(hw, FM10K_TDBAL(i),
diff --git a/drivers/net/fm10k/fm10k_rxtx.c b/drivers/net/fm10k/fm10k_rxtx.c
index e958865..f87987d 100644
--- a/drivers/net/fm10k/fm10k_rxtx.c
+++ b/drivers/net/fm10k/fm10k_rxtx.c
@@ -152,6 +152,13 @@ fm10k_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
 		 */
 		mbuf->ol_flags |= PKT_RX_VLAN_PKT;
 		mbuf->vlan_tci = desc.w.vlan;
+#ifdef RTE_LIBRTE_FM10K_FTAG_FWD
+		/**
+		 * mbuf->vlan_tci_outer is an idle field in fm10k driver,
+		 * so it can be selected to store sglort value.
+		 */
+		mbuf->vlan_tci_outer = rte_le_to_cpu_16(desc.w.sglort);
+#endif
 
 		rx_pkts[count] = mbuf;
 		if (++next_dd == q->nb_desc) {
@@ -307,6 +314,13 @@ fm10k_recv_scattered_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
 		 */
 		mbuf->ol_flags |= PKT_RX_VLAN_PKT;
 		first_seg->vlan_tci = desc.w.vlan;
+#ifdef RTE_LIBRTE_FM10K_FTAG_FWD
+		/**
+		 * mbuf->vlan_tci_outer is an idle field in fm10k driver,
+		 * so it can be selected to store sglort value.
+		 */
+		first_seg->vlan_tci_outer = rte_le_to_cpu_16(desc.w.sglort);
+#endif
 
 		/* Prefetch data of first segment, if configured to do so. */
 		rte_packet_prefetch((char *)first_seg->buf_addr +
@@ -432,6 +446,9 @@ static inline void tx_xmit_pkt(struct fm10k_tx_queue *q, struct rte_mbuf *mb)
 	q->nb_free -= mb->nb_segs;
 
 	q->hw_ring[q->next_free].flags = 0;
+#ifdef RTE_LIBRTE_FM10K_FTAG_FWD
+	q->hw_ring[q->next_free].flags |= FM10K_TXD_FLAG_FTAG;
+#endif
 	/* set checksum flags on first descriptor of packet. SCTP checksum
 	 * offload is not supported, but we do not explicitly check for this
 	 * case in favor of greatly simplified processing. */
diff --git a/drivers/net/fm10k/fm10k_rxtx_vec.c b/drivers/net/fm10k/fm10k_rxtx_vec.c
index 2a57eef..0b0f2e3 100644
--- a/drivers/net/fm10k/fm10k_rxtx_vec.c
+++ b/drivers/net/fm10k/fm10k_rxtx_vec.c
@@ -198,7 +198,12 @@ fm10k_rx_vec_condition_check(struct rte_eth_dev *dev)
 	    rxmode->header_split == 1)
 		return -1;
 
+#ifdef RTE_LIBRTE_FM10K_FTAG_FWD
+	return -1;
+#else
 	return 0;
+#endif
+
 #else
 	RTE_SET_USED(dev);
 	return -1;
@@ -648,7 +653,11 @@ fm10k_tx_vec_condition_check(struct fm10k_tx_queue *txq)
 	if ((txq->txq_flags & FM10K_SIMPLE_TX_FLAG) != FM10K_SIMPLE_TX_FLAG)
 		return -1;
 
+#ifdef RTE_LIBRTE_FM10K_FTAG_FWD
+	return -1;
+#else
 	return 0;
+#endif
 }
 
 static inline void
-- 
1.9.3