From: Wenzhuo Lu <wenzhuo.lu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 5/8] lib/librte_ether: support new l2 tunnel operation
Date: Fri, 29 Jan 2016 15:03:52 +0800 [thread overview]
Message-ID: <1454051035-25757-6-git-send-email-wenzhuo.lu@intel.com> (raw)
In-Reply-To: <1454051035-25757-1-git-send-email-wenzhuo.lu@intel.com>
Add functions to support the new l2 tunnel operation.
1, Insertion and stripping for l2 tunnel tag.
2, Forwarding the packets to a pool based on l2 tunnel tag.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
---
lib/librte_ether/rte_ethdev.c | 178 ++++++++++++++++++++++++++++++++++++
lib/librte_ether/rte_ethdev.h | 204 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 382 insertions(+)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 1b90e09..a5a398c 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -3300,3 +3300,181 @@ rte_eth_dev_l2_tunnel_disable(uint8_t port_id,
-ENOTSUP);
return (*dev->dev_ops->l2_tunnel_disable)(dev, l2_tunnel_type);
}
+
+int
+rte_eth_dev_l2_tunnel_insertion_enable(uint8_t port_id,
+ struct rte_eth_l2_tunnel *l2_tunnel)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ if (l2_tunnel == NULL) {
+ RTE_PMD_DEBUG_TRACE("Invalid l2_tunnel parameter\n");
+ return -EINVAL;
+ }
+
+ if (l2_tunnel->l2_tunnel_type >= RTE_L2_TUNNEL_TYPE_MAX) {
+ RTE_PMD_DEBUG_TRACE("Invalid l2 tunnel type\n");
+ return -EINVAL;
+ }
+
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->l2_tunnel_insertion_enable,
+ -ENOTSUP);
+ return (*dev->dev_ops->l2_tunnel_insertion_enable)(dev, l2_tunnel);
+}
+
+int
+rte_eth_dev_l2_tunnel_insertion_disable(uint8_t port_id,
+ enum rte_eth_l2_tunnel_type
+ l2_tunnel_type)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ if (l2_tunnel_type >= RTE_L2_TUNNEL_TYPE_MAX) {
+ RTE_PMD_DEBUG_TRACE("Invalid l2 tunnel type\n");
+ return -EINVAL;
+ }
+
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->l2_tunnel_insertion_disable,
+ -ENOTSUP);
+ return (*dev->dev_ops->l2_tunnel_insertion_disable)(dev,
+ l2_tunnel_type);
+}
+
+int
+rte_eth_dev_l2_tunnel_stripping_enable(uint8_t port_id,
+ enum rte_eth_l2_tunnel_type
+ l2_tunnel_type)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ if (l2_tunnel_type >= RTE_L2_TUNNEL_TYPE_MAX) {
+ RTE_PMD_DEBUG_TRACE("Invalid l2 tunnel type\n");
+ return -EINVAL;
+ }
+
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->l2_tunnel_stripping_enable,
+ -ENOTSUP);
+ return (*dev->dev_ops->l2_tunnel_stripping_enable)(dev,
+ l2_tunnel_type);
+}
+
+int
+rte_eth_dev_l2_tunnel_stripping_disable(uint8_t port_id,
+ enum rte_eth_l2_tunnel_type
+ l2_tunnel_type)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ if (l2_tunnel_type >= RTE_L2_TUNNEL_TYPE_MAX) {
+ RTE_PMD_DEBUG_TRACE("Invalid l2 tunnel type\n");
+ return -EINVAL;
+ }
+
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->l2_tunnel_stripping_disable,
+ -ENOTSUP);
+ return (*dev->dev_ops->l2_tunnel_stripping_disable)(dev,
+ l2_tunnel_type);
+}
+
+int
+rte_eth_dev_l2_tunnel_forwarding_enable(uint8_t port_id,
+ enum rte_eth_l2_tunnel_type
+ l2_tunnel_type)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ if (l2_tunnel_type >= RTE_L2_TUNNEL_TYPE_MAX) {
+ RTE_PMD_DEBUG_TRACE("Invalid l2 tunnel type\n");
+ return -EINVAL;
+ }
+
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->l2_tunnel_forwarding_enable,
+ -ENOTSUP);
+ return (*dev->dev_ops->l2_tunnel_forwarding_enable)(dev,
+ l2_tunnel_type);
+}
+
+int
+rte_eth_dev_l2_tunnel_forwarding_disable(uint8_t port_id,
+ enum rte_eth_l2_tunnel_type
+ l2_tunnel_type)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ if (l2_tunnel_type >= RTE_L2_TUNNEL_TYPE_MAX) {
+ RTE_PMD_DEBUG_TRACE("Invalid l2 tunnel type\n");
+ return -EINVAL;
+ }
+
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->l2_tunnel_forwarding_disable,
+ -ENOTSUP);
+ return (*dev->dev_ops->l2_tunnel_forwarding_disable)(dev,
+ l2_tunnel_type);
+}
+
+int
+rte_eth_dev_l2_tunnel_filter_add(uint8_t port_id,
+ struct rte_eth_l2_tunnel *l2_tunnel,
+ uint32_t pool)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ if (l2_tunnel == NULL) {
+ RTE_PMD_DEBUG_TRACE("Invalid l2_tunnel parameter\n");
+ return -EINVAL;
+ }
+
+ if (l2_tunnel->l2_tunnel_type >= RTE_L2_TUNNEL_TYPE_MAX) {
+ RTE_PMD_DEBUG_TRACE("Invalid l2 tunnel type\n");
+ return -EINVAL;
+ }
+
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->l2_tunnel_filter_add,
+ -ENOTSUP);
+ return (*dev->dev_ops->l2_tunnel_filter_add)(dev,
+ l2_tunnel,
+ pool);
+}
+
+int
+rte_eth_dev_l2_tunnel_filter_del(uint8_t port_id,
+ struct rte_eth_l2_tunnel *l2_tunnel)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ if (l2_tunnel == NULL) {
+ RTE_PMD_DEBUG_TRACE("Invalid l2_tunnel parameter\n");
+ return -EINVAL;
+ }
+
+ if (l2_tunnel->l2_tunnel_type >= RTE_L2_TUNNEL_TYPE_MAX) {
+ RTE_PMD_DEBUG_TRACE("Invalid l2 tunnel type\n");
+ return -EINVAL;
+ }
+
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->l2_tunnel_filter_del,
+ -ENOTSUP);
+ return (*dev->dev_ops->l2_tunnel_filter_del)(dev,
+ l2_tunnel);
+}
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 9b594b8..ffb4993 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -963,6 +963,7 @@ TAILQ_HEAD(rte_eth_dev_cb_list, rte_eth_dev_callback);
struct rte_eth_l2_tunnel {
enum rte_eth_l2_tunnel_type l2_tunnel_type;
uint16_t ether_type;
+ uint32_t tunnel_id; /* port tag id for e-tag */
};
/*
@@ -1283,6 +1284,41 @@ typedef int (*eth_l2_tunnel_disable_t)
enum rte_eth_l2_tunnel_type l2_tunnel_type);
/**< @internal disable a type of l2 tunnel */
+typedef int (*eth_l2_tunnel_insertion_enable_t)
+ (struct rte_eth_dev *dev, struct rte_eth_l2_tunnel *l2_tunnel);
+/**< @internal enable insertion of l2 tunnel tag */
+
+typedef int (*eth_l2_tunnel_insertion_disable_t)
+ (struct rte_eth_dev *dev, enum rte_eth_l2_tunnel_type l2_tunnel_type);
+/**< @internal disable insertion of l2 tunnel tag */
+
+typedef int (*eth_l2_tunnel_stripping_enable_t)
+ (struct rte_eth_dev *dev, enum rte_eth_l2_tunnel_type l2_tunnel_type);
+/**< @internal enable stripping of l2 tunnel tag */
+
+typedef int (*eth_l2_tunnel_stripping_disable_t)
+ (struct rte_eth_dev *dev, enum rte_eth_l2_tunnel_type l2_tunnel_type);
+/**< @internal disable stripping of l2 tunnel tag */
+
+typedef int (*eth_l2_tunnel_forwarding_enable_t)
+ (struct rte_eth_dev *dev,
+ enum rte_eth_l2_tunnel_type l2_tunnel_type);
+/**< @internal enable forwarding of l2 tunnel packets */
+
+typedef int (*eth_l2_tunnel_forwarding_disable_t)
+ (struct rte_eth_dev *dev,
+ enum rte_eth_l2_tunnel_type l2_tunnel_type);
+/**< @internal disable forwarding of l2 tunnel packets */
+
+typedef int (*eth_l2_tunnel_filter_add_t)(struct rte_eth_dev *dev,
+ struct rte_eth_l2_tunnel *l2_tunnel,
+ uint32_t pool);
+/**< @internal add filter of l2 tunnel packets */
+
+typedef int (*eth_l2_tunnel_filter_del_t)(struct rte_eth_dev *dev,
+ struct rte_eth_l2_tunnel *l2_tunnel);
+/**< @internal delete filter of l2 tunnel packets */
+
#ifdef RTE_NIC_BYPASS
enum {
@@ -1471,6 +1507,22 @@ struct eth_dev_ops {
eth_l2_tunnel_enable_t l2_tunnel_enable;
/** Disable a type of l2 tunnel */
eth_l2_tunnel_disable_t l2_tunnel_disable;
+ /** Enable insertion of l2 tunnel tag */
+ eth_l2_tunnel_insertion_enable_t l2_tunnel_insertion_enable;
+ /** Disable insertion of l2 tunnel tag */
+ eth_l2_tunnel_insertion_disable_t l2_tunnel_insertion_disable;
+ /** Enable stripping of l2 tunnel tag */
+ eth_l2_tunnel_stripping_enable_t l2_tunnel_stripping_enable;
+ /** Disable stripping of l2 tunnel tag */
+ eth_l2_tunnel_stripping_disable_t l2_tunnel_stripping_disable;
+ /** Enable forwarding of l2 tunnel packets */
+ eth_l2_tunnel_forwarding_enable_t l2_tunnel_forwarding_enable;
+ /** Disable forwarding of l2 tunnel packets */
+ eth_l2_tunnel_forwarding_disable_t l2_tunnel_forwarding_disable;
+ /** Add filter of l2 tunnel packets */
+ eth_l2_tunnel_filter_add_t l2_tunnel_filter_add;
+ /** Delete filter of l2 tunnel packets */
+ eth_l2_tunnel_filter_del_t l2_tunnel_filter_del;
};
/**
@@ -3971,6 +4023,158 @@ int
rte_eth_dev_l2_tunnel_disable(uint8_t port_id,
enum rte_eth_l2_tunnel_type l2_tunnel_type);
+ /**
+ * Enable l2 tunnel tag insertion of an Ethernet device for specific
+ * tunnel packets by ether type.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param l2_tunnel
+ * l2 tunnel configuration.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_l2_tunnel_insertion_enable(uint8_t port_id,
+ struct rte_eth_l2_tunnel *l2_tunnel);
+
+ /**
+ * Disable l2 tunnel tag insertion of an Ethernet device for specific
+ * tunnel packets by ether type.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param l2_tunnel_type
+ * l2 tunnel type.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_l2_tunnel_insertion_disable
+ (uint8_t port_id,
+ enum rte_eth_l2_tunnel_type l2_tunnel_type);
+
+ /**
+ * Enable l2 tunnel tag stripping of an Ethernet device for specific
+ * tunnel packets by ether type.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param l2_tunnel_type
+ * l2 tunnel type.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_l2_tunnel_stripping_enable
+ (uint8_t port_id,
+ enum rte_eth_l2_tunnel_type l2_tunnel_type);
+
+ /**
+ * Disable l2 tunnel tag stripping of an Ethernet device for specific
+ * tunnel packets by ether type.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param l2_tunnel_type
+ * l2 tunnel type.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_l2_tunnel_stripping_disable
+ (uint8_t port_id,
+ enum rte_eth_l2_tunnel_type l2_tunnel_type);
+
+ /**
+ * Enable l2 tunnel tag forwarding of an Ethernet device for specific
+ * tunnel packets by ether type.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param l2_tunnel_type
+ * l2 tunnel type.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_l2_tunnel_forwarding_enable
+ (uint8_t port_id,
+ enum rte_eth_l2_tunnel_type l2_tunnel_type);
+
+ /**
+ * Disable l2 tunnel tag forwarding of an Ethernet device for specific
+ * tunnel packets by ether type.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param l2_tunnel_type
+ * l2 tunnel type.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_l2_tunnel_forwarding_disable
+ (uint8_t port_id,
+ enum rte_eth_l2_tunnel_type l2_tunnel_type);
+
+ /**
+ * Add a filter for packet forwarding based on l2 tunnel tag of an Ethernet
+ * device for specific tunnel packets.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param l2_tunnel
+ * l2 tunnel configuration.
+ * @param pool
+ * Destination pool.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_l2_tunnel_filter_add(uint8_t port_id,
+ struct rte_eth_l2_tunnel *l2_tunnel,
+ uint32_t pool);
+
+ /**
+ * Delete a filter for packet forwarding based on l2 tunnel tag of an Ethernet
+ * device for specific tunnel packets.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param l2_tunnel
+ * l2 tunnel configuration.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_l2_tunnel_filter_del(uint8_t port_id,
+ struct rte_eth_l2_tunnel *l2_tunnel);
+
#ifdef __cplusplus
}
#endif
--
1.9.3
next prev parent reply other threads:[~2016-01-29 7:04 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-29 7:03 [dpdk-dev] [PATCH 0/8] support E-tag offloading and forwarding on Intel X550 NIC Wenzhuo Lu
2016-01-29 7:03 ` [dpdk-dev] [PATCH 1/8] ixgbe: select pool by MAC when using double VLAN Wenzhuo Lu
2016-01-29 7:03 ` [dpdk-dev] [PATCH 2/8] lib/librte_ether: support l2 tunnel config Wenzhuo Lu
2016-01-29 7:03 ` [dpdk-dev] [PATCH 3/8] ixgbe: " Wenzhuo Lu
2016-01-29 7:03 ` [dpdk-dev] [PATCH 4/8] app/testpmd: add CLIs for " Wenzhuo Lu
2016-01-29 7:03 ` Wenzhuo Lu [this message]
2016-01-29 7:03 ` [dpdk-dev] [PATCH 6/8] ixgbe: support l2 tunnel operation Wenzhuo Lu
2016-01-29 7:03 ` [dpdk-dev] [PATCH 7/8] app/testpmd: add CLIs for E-tag operation Wenzhuo Lu
2016-01-29 7:03 ` [dpdk-dev] [PATCH 8/8] doc: add release note for E-tag Wenzhuo Lu
2016-02-01 16:15 ` Mcnamara, John
2016-01-29 7:16 ` [dpdk-dev] [PATCH 0/8] support E-tag offloading and forwarding on Intel X550 NIC Qiu, Michael
2016-02-01 1:04 ` Lu, Wenzhuo
2016-02-01 1:39 ` Yuanhan Liu
2016-02-01 1:56 ` Lu, Wenzhuo
2016-02-01 2:06 ` Yuanhan Liu
2016-02-01 3:00 ` Lu, Wenzhuo
2016-02-01 8:31 ` Qiu, Michael
2016-02-02 1:24 ` Lu, Wenzhuo
2016-02-02 6:56 ` [dpdk-dev] [PATCH v2 0/7] " Wenzhuo Lu
2016-02-02 6:56 ` [dpdk-dev] [PATCH v2 1/7] ixgbe: select pool by MAC when using double VLAN Wenzhuo Lu
2016-02-02 6:57 ` [dpdk-dev] [PATCH v2 2/7] lib/librte_ether: support l2 tunnel config Wenzhuo Lu
2016-02-02 12:03 ` Bruce Richardson
2016-02-03 1:05 ` Lu, Wenzhuo
2016-02-03 3:36 ` Stephen Hemminger
2016-02-03 8:08 ` Lu, Wenzhuo
2016-02-02 6:57 ` [dpdk-dev] [PATCH v2 3/7] ixgbe: " Wenzhuo Lu
2016-02-02 6:57 ` [dpdk-dev] [PATCH v2 4/7] app/testpmd: add CLIs for " Wenzhuo Lu
2016-02-02 6:57 ` [dpdk-dev] [PATCH v2 5/7] lib/librte_ether: support new l2 tunnel operation Wenzhuo Lu
2016-02-02 6:57 ` [dpdk-dev] [PATCH v2 6/7] ixgbe: support " Wenzhuo Lu
2016-02-02 6:57 ` [dpdk-dev] [PATCH v2 7/7] app/testpmd: add CLIs for E-tag operation Wenzhuo Lu
2016-02-12 13:50 ` [dpdk-dev] [PATCH v2 0/7] support E-tag offloading and forwarding on Intel X550 NIC De Lara Guarch, Pablo
2016-02-15 1:21 ` Lu, Wenzhuo
2016-02-15 9:39 ` De Lara Guarch, Pablo
2016-02-16 8:20 ` [dpdk-dev] [PATCH v3 " Wenzhuo Lu
2016-02-16 8:20 ` [dpdk-dev] [PATCH v3 1/7] ixgbe: select pool by MAC when using double VLAN Wenzhuo Lu
2016-02-16 8:20 ` [dpdk-dev] [PATCH v3 2/7] lib/librte_ether: support l2 tunnel config Wenzhuo Lu
2016-02-16 8:20 ` [dpdk-dev] [PATCH v3 3/7] ixgbe: " Wenzhuo Lu
2016-02-16 8:20 ` [dpdk-dev] [PATCH v3 4/7] app/testpmd: add CLIs for " Wenzhuo Lu
2016-02-16 8:20 ` [dpdk-dev] [PATCH v3 5/7] lib/librte_ether: support new l2 tunnel operation Wenzhuo Lu
2016-02-16 8:20 ` [dpdk-dev] [PATCH v3 6/7] ixgbe: support " Wenzhuo Lu
2016-02-16 8:20 ` [dpdk-dev] [PATCH v3 7/7] app/testpmd: add CLIs for E-tag operation Wenzhuo Lu
2016-02-18 2:46 ` [dpdk-dev] [PATCH v4 0/7] support E-tag offloading and forwarding on Intel X550 NIC Wenzhuo Lu
2016-02-18 2:46 ` [dpdk-dev] [PATCH v4 1/7] ixgbe: select pool by MAC when using double VLAN Wenzhuo Lu
2016-02-18 2:46 ` [dpdk-dev] [PATCH v4 2/7] lib/librte_ether: support l2 tunnel config Wenzhuo Lu
2016-02-18 2:46 ` [dpdk-dev] [PATCH v4 3/7] ixgbe: " Wenzhuo Lu
2016-03-04 1:47 ` He, Shaopeng
2016-03-04 3:17 ` Lu, Wenzhuo
2016-02-18 2:46 ` [dpdk-dev] [PATCH v4 4/7] app/testpmd: add CLIs for " Wenzhuo Lu
2016-02-18 2:46 ` [dpdk-dev] [PATCH v4 5/7] lib/librte_ether: support new l2 tunnel operation Wenzhuo Lu
2016-03-04 1:47 ` He, Shaopeng
2016-03-04 3:31 ` Lu, Wenzhuo
2016-03-07 2:04 ` He, Shaopeng
2016-02-18 2:46 ` [dpdk-dev] [PATCH v4 6/7] ixgbe: support " Wenzhuo Lu
2016-03-04 1:46 ` He, Shaopeng
2016-03-04 3:15 ` Lu, Wenzhuo
2016-02-18 2:46 ` [dpdk-dev] [PATCH v4 7/7] app/testpmd: add CLIs for E-tag operation Wenzhuo Lu
2016-03-04 1:46 ` He, Shaopeng
2016-03-04 3:11 ` Lu, Wenzhuo
2016-03-04 9:23 ` [dpdk-dev] [PATCH v4 0/7] support E-tag offloading and forwarding on Intel X550 NIC Liu, Yong
2016-03-07 2:42 ` [dpdk-dev] [PATCH v5 0/7] support E-tag offloading and forwarding on X550 Wenzhuo Lu
2016-03-07 2:42 ` [dpdk-dev] [PATCH v5 1/7] ixgbe: select pool by MAC when using double VLAN Wenzhuo Lu
2016-03-07 2:42 ` [dpdk-dev] [PATCH v5 2/7] lib/librte_ether: support l2 tunnel config Wenzhuo Lu
2016-03-07 2:42 ` [dpdk-dev] [PATCH v5 3/7] ixgbe: " Wenzhuo Lu
2016-03-07 2:42 ` [dpdk-dev] [PATCH v5 4/7] app/testpmd: add CLIs for " Wenzhuo Lu
2016-03-07 2:42 ` [dpdk-dev] [PATCH v5 5/7] lib/librte_ether: support new l2 tunnel operation Wenzhuo Lu
2016-03-07 3:29 ` Wu, Jingjing
2016-03-07 5:29 ` Lu, Wenzhuo
2016-03-07 2:42 ` [dpdk-dev] [PATCH v5 6/7] ixgbe: support " Wenzhuo Lu
2016-03-07 2:42 ` [dpdk-dev] [PATCH v5 7/7] app/testpmd: add CLIs for E-tag operation Wenzhuo Lu
2016-03-08 6:53 ` [dpdk-dev] [PATCH v6 0/5] support E-tag offloading and forwarding on X550 Wenzhuo Lu
2016-03-08 6:53 ` [dpdk-dev] [PATCH v6 1/5] ixgbe: select pool by MAC when using double VLAN Wenzhuo Lu
2016-03-08 6:53 ` [dpdk-dev] [PATCH v6 2/5] lib/librte_ether: support l2 tunnel operations Wenzhuo Lu
2016-03-09 0:14 ` Thomas Monjalon
2016-03-09 1:15 ` Lu, Wenzhuo
2016-03-09 9:27 ` Thomas Monjalon
2016-03-10 0:54 ` Lu, Wenzhuo
2016-03-08 6:53 ` [dpdk-dev] [PATCH v6 3/5] ixgbe: " Wenzhuo Lu
2016-03-08 6:53 ` [dpdk-dev] [PATCH v6 4/5] app/testpmd: add CLIs for l2 tunnel config Wenzhuo Lu
2016-03-08 6:53 ` [dpdk-dev] [PATCH v6 5/5] app/testpmd: add CLIs for E-tag operation Wenzhuo Lu
2016-03-08 8:08 ` [dpdk-dev] [PATCH v6 0/5] support E-tag offloading and forwarding on X550 Wu, Jingjing
2016-03-09 7:44 ` [dpdk-dev] [PATCH v7 " Wenzhuo Lu
2016-03-09 7:44 ` [dpdk-dev] [PATCH v7 1/5] ixgbe: select pool by MAC when using double VLAN Wenzhuo Lu
2016-03-09 7:44 ` [dpdk-dev] [PATCH v7 2/5] lib/librte_ether: support l2 tunnel operations Wenzhuo Lu
2016-03-09 7:44 ` [dpdk-dev] [PATCH v7 3/5] ixgbe: " Wenzhuo Lu
2016-03-09 7:44 ` [dpdk-dev] [PATCH v7 4/5] app/testpmd: add CLIs for l2 tunnel config Wenzhuo Lu
2016-03-09 7:44 ` [dpdk-dev] [PATCH v7 5/5] app/testpmd: add CLIs for E-tag operation Wenzhuo Lu
2016-03-09 10:07 ` [dpdk-dev] [PATCH v7 0/5] support E-tag offloading and forwarding on X550 Thomas Monjalon
2016-03-10 0:44 ` Lu, Wenzhuo
2016-03-11 1:10 ` [dpdk-dev] [PATCH v8 " Wenzhuo Lu
2016-03-11 1:10 ` [dpdk-dev] [PATCH v8 1/5] ixgbe: select pool by MAC when using double VLAN Wenzhuo Lu
2016-03-11 1:10 ` [dpdk-dev] [PATCH v8 2/5] lib/librte_ether: support l2 tunnel operations Wenzhuo Lu
2016-03-11 1:10 ` [dpdk-dev] [PATCH v8 3/5] ixgbe: " Wenzhuo Lu
2016-03-11 1:10 ` [dpdk-dev] [PATCH v8 4/5] app/testpmd: add CLIs for l2 tunnel config Wenzhuo Lu
2016-03-11 1:10 ` [dpdk-dev] [PATCH v8 5/5] app/testpmd: add CLIs for E-tag operation Wenzhuo Lu
2016-03-11 22:27 ` [dpdk-dev] [PATCH v8 0/5] support E-tag offloading and forwarding on X550 Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454051035-25757-6-git-send-email-wenzhuo.lu@intel.com \
--to=wenzhuo.lu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).