From: Bernard Iremonger <bernard.iremonger@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 2/2] bonding: fix detach of bonded slave devices
Date: Wed, 10 Feb 2016 10:13:45 +0000 [thread overview]
Message-ID: <1455099225-7731-3-git-send-email-bernard.iremonger@intel.com> (raw)
In-Reply-To: <1455099225-7731-1-git-send-email-bernard.iremonger@intel.com>
Ensure that a bonded slave device is not detached,
until it is removed from the bonded device.
Fixes: 2efb58cbab6e ("bond: new link bonding library")
Fixes: a45b288ef21a ("bond: support link status polling")
Fixes: 494adb7f63f2 ("ethdev: add device fields from PCI layer")
Fixes: b1fb53a39d88 ("ethdev: remove some PCI specific handling")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
---
drivers/net/bonding/rte_eth_bond_api.c | 33 +++++++++++----------------------
lib/librte_ether/rte_ethdev.c | 8 ++++++--
lib/librte_ether/rte_ethdev.h | 4 +++-
3 files changed, 20 insertions(+), 25 deletions(-)
diff --git a/drivers/net/bonding/rte_eth_bond_api.c b/drivers/net/bonding/rte_eth_bond_api.c
index 484a6f3..a0995ec 100644
--- a/drivers/net/bonding/rte_eth_bond_api.c
+++ b/drivers/net/bonding/rte_eth_bond_api.c
@@ -314,38 +314,23 @@ __eth_bond_slave_add_lock_free(uint8_t bonded_port_id, uint8_t slave_port_id)
{
struct rte_eth_dev *bonded_eth_dev, *slave_eth_dev;
struct bond_dev_private *internals;
- struct bond_dev_private *temp_internals;
struct rte_eth_link link_props;
struct rte_eth_dev_info dev_info;
- int i, j;
-
if (valid_slave_port_id(slave_port_id) != 0)
return -1;
bonded_eth_dev = &rte_eth_devices[bonded_port_id];
internals = bonded_eth_dev->data->dev_private;
- /* Verify that new slave device is not already a slave of another
- * bonded device */
- for (i = rte_eth_dev_count()-1; i >= 0; i--) {
- if (check_for_bonded_ethdev(&rte_eth_devices[i]) == 0) {
- temp_internals = rte_eth_devices[i].data->dev_private;
-
- for (j = 0; j < temp_internals->slave_count; j++) {
- /* Device already a slave of a bonded device */
- if (temp_internals->slaves[j].port_id == slave_port_id) {
- RTE_BOND_LOG(ERR, "Slave port %d is already a slave",
- slave_port_id);
- return -1;
- }
- }
- }
- }
-
slave_eth_dev = &rte_eth_devices[slave_port_id];
+ if (slave_eth_dev->data->dev_flags & RTE_ETH_DEV_BONDED_SLAVE) {
+ RTE_BOND_LOG(ERR, "Slave device is already a slave of a bonded device");
+ return -1;
+ }
/* Add slave details to bonded device */
+ slave_eth_dev->data->dev_flags |= RTE_ETH_DEV_BONDED_SLAVE;
slave_add(internals, slave_eth_dev);
rte_eth_dev_info_get(slave_port_id, &dev_info);
@@ -385,6 +370,7 @@ __eth_bond_slave_add_lock_free(uint8_t bonded_port_id, uint8_t slave_port_id)
if (internals->link_props_set) {
if (link_properties_valid(&(bonded_eth_dev->data->dev_link),
&(slave_eth_dev->data->dev_link))) {
+ slave_eth_dev->data->dev_flags &= (~RTE_ETH_DEV_BONDED_SLAVE);
RTE_BOND_LOG(ERR,
"Slave port %d link speed/duplex not supported",
slave_port_id);
@@ -416,6 +402,7 @@ __eth_bond_slave_add_lock_free(uint8_t bonded_port_id, uint8_t slave_port_id)
if (bonded_eth_dev->data->dev_started) {
if (slave_configure(bonded_eth_dev, slave_eth_dev) != 0) {
+ slave_eth_dev->data->dev_flags &= (~RTE_ETH_DEV_BONDED_SLAVE);
RTE_BOND_LOG(ERR, "rte_bond_slaves_configure: port=%d",
slave_port_id);
return -1;
@@ -468,7 +455,7 @@ __eth_bond_slave_remove_lock_free(uint8_t bonded_port_id, uint8_t slave_port_id)
{
struct rte_eth_dev *bonded_eth_dev;
struct bond_dev_private *internals;
-
+ struct rte_eth_dev *slave_eth_dev;
int i, slave_idx;
if (valid_slave_port_id(slave_port_id) != 0)
@@ -508,7 +495,9 @@ __eth_bond_slave_remove_lock_free(uint8_t bonded_port_id, uint8_t slave_port_id)
mac_address_set(&rte_eth_devices[slave_port_id],
&(internals->slaves[slave_idx].persisted_mac_addr));
- slave_remove(internals, &rte_eth_devices[slave_port_id]);
+ slave_eth_dev = &rte_eth_devices[slave_port_id];
+ slave_remove(internals, slave_eth_dev);
+ slave_eth_dev->data->dev_flags &= (~RTE_ETH_DEV_BONDED_SLAVE);
/* first slave in the active list will be the primary by default,
* otherwise use first device in list */
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 756b234..a6e83c1 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ * Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -495,7 +495,11 @@ rte_eth_dev_is_detachable(uint8_t port_id)
return -ENOTSUP;
}
dev_flags = rte_eth_devices[port_id].data->dev_flags;
- return !(dev_flags & RTE_ETH_DEV_DETACHABLE);
+ if ((dev_flags & RTE_ETH_DEV_DETACHABLE) &&
+ (!(dev_flags & RTE_ETH_DEV_BONDED_SLAVE)))
+ return 0;
+ else
+ return 1;
}
/* attach the new physical device, then store port_id of the device */
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 8710dd7..66346a0 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ * Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -1616,6 +1616,8 @@ struct rte_eth_dev_data {
#define RTE_ETH_DEV_DETACHABLE 0x0001
/** Device supports link state interrupt */
#define RTE_ETH_DEV_INTR_LSC 0x0002
+/** Device is a bonded slave */
+#define RTE_ETH_DEV_BONDED_SLAVE 0x0004
/**
* @internal
--
2.6.3
next prev parent reply other threads:[~2016-02-10 10:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-10 10:13 [dpdk-dev] [PATCH 0/2] bonding fixes Bernard Iremonger
2016-02-10 10:13 ` [dpdk-dev] [PATCH 1/2] bonding: fix detach of bonded device Bernard Iremonger
2016-02-10 10:13 ` Bernard Iremonger [this message]
2016-02-22 13:20 ` [dpdk-dev] [PATCH 0/2] bonding fixes Doherty, Declan
2016-02-26 17:48 ` Bruce Richardson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455099225-7731-3-git-send-email-bernard.iremonger@intel.com \
--to=bernard.iremonger@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).