DPDK patches and discussions
 help / color / mirror / Atom feed
From: Helin Zhang <helin.zhang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2 04/30] i40e/base: add changes in nvm read to support X722
Date: Thu, 18 Feb 2016 14:29:54 +0800	[thread overview]
Message-ID: <1455777020-12095-5-git-send-email-helin.zhang@intel.com> (raw)
In-Reply-To: <1455777020-12095-1-git-send-email-helin.zhang@intel.com>

In X722, NVM reads can't be done through SRCTL registers.
And require AQ calls, which require grabbing the NVM lock.
Unfortunately some paths need the lock to be acquired once
and do a whole bunch of stuff and then release it.
This patch creates an unsafe version of the read calls, so
that it can be called from the paths that need the bulk access.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
---
 drivers/net/i40e/base/i40e_nvm.c       | 109 ++++++++++++++++++++++++++-------
 drivers/net/i40e/base/i40e_prototype.h |   8 ++-
 2 files changed, 92 insertions(+), 25 deletions(-)

diff --git a/drivers/net/i40e/base/i40e_nvm.c b/drivers/net/i40e/base/i40e_nvm.c
index a1b150a..f4e4eaa 100644
--- a/drivers/net/i40e/base/i40e_nvm.c
+++ b/drivers/net/i40e/base/i40e_nvm.c
@@ -53,7 +53,7 @@ enum i40e_status_code i40e_read_nvm_aq(struct i40e_hw *hw, u8 module_pointer,
  * once per NVM initialization, e.g. inside the i40e_init_shared_code().
  * Please notice that the NVM term is used here (& in all methods covered
  * in this file) as an equivalent of the FLASH part mapped into the SR.
- * We are accessing FLASH always thru the Shadow RAM.
+ * We are accessing FLASH always through the Shadow RAM.
  **/
 enum i40e_status_code i40e_init_nvm(struct i40e_hw *hw)
 {
@@ -207,7 +207,7 @@ static enum i40e_status_code i40e_poll_sr_srctl_done_bit(struct i40e_hw *hw)
 }
 
 /**
- * i40e_read_nvm_word - Reads Shadow RAM
+ * i40e_read_nvm_word - Reads nvm word and acquire lock if necessary
  * @hw: pointer to the HW structure
  * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF)
  * @data: word read from the Shadow RAM
@@ -236,6 +236,31 @@ enum i40e_status_code i40e_read_nvm_word(struct i40e_hw *hw, u16 offset,
 }
 
 /**
+ * __i40e_read_nvm_word - Reads nvm word, assumes caller does the locking
+ * @hw: pointer to the HW structure
+ * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF)
+ * @data: word read from the Shadow RAM
+ *
+ * Reads one 16 bit word from the Shadow RAM using the GLNVM_SRCTL register.
+ **/
+enum i40e_status_code __i40e_read_nvm_word(struct i40e_hw *hw,
+					   u16 offset,
+					   u16 *data)
+{
+	enum i40e_status_code ret_code = I40E_SUCCESS;
+
+#ifdef X722_SUPPORT
+	if (hw->flags & I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE)
+		ret_code = i40e_read_nvm_word_aq(hw, offset, data);
+	else
+		ret_code = i40e_read_nvm_word_srctl(hw, offset, data);
+#else
+	ret_code = i40e_read_nvm_word_srctl(hw, offset, data);
+#endif
+	return ret_code;
+}
+
+/**
  * i40e_read_nvm_word_srctl - Reads Shadow RAM via SRCTL register
  * @hw: pointer to the HW structure
  * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF)
@@ -307,7 +332,35 @@ enum i40e_status_code i40e_read_nvm_word_aq(struct i40e_hw *hw, u16 offset,
 }
 
 /**
- * i40e_read_nvm_buffer - Reads Shadow RAM buffer
+ * __i40e_read_nvm_buffer - Reads nvm buffer, caller must acquire lock
+ * @hw: pointer to the HW structure
+ * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF).
+ * @words: (in) number of words to read; (out) number of words actually read
+ * @data: words read from the Shadow RAM
+ *
+ * Reads 16 bit words (data buffer) from the SR using the i40e_read_nvm_srrd()
+ * method. The buffer read is preceded by the NVM ownership take
+ * and followed by the release.
+ **/
+enum i40e_status_code __i40e_read_nvm_buffer(struct i40e_hw *hw,
+					     u16 offset,
+					     u16 *words, u16 *data)
+{
+	enum i40e_status_code ret_code = I40E_SUCCESS;
+
+#ifdef X722_SUPPORT
+	if (hw->flags & I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE)
+		ret_code = i40e_read_nvm_buffer_aq(hw, offset, words, data);
+	else
+		ret_code = i40e_read_nvm_buffer_srctl(hw, offset, words, data);
+#else
+	ret_code = i40e_read_nvm_buffer_srctl(hw, offset, words, data);
+#endif
+	return ret_code;
+}
+
+/**
+ * i40e_read_nvm_buffer - Reads Shadow RAM buffer and acuire lock if necessary
  * @hw: pointer to the HW structure
  * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF).
  * @words: (in) number of words to read; (out) number of words actually read
@@ -327,7 +380,7 @@ enum i40e_status_code i40e_read_nvm_buffer(struct i40e_hw *hw, u16 offset,
 		ret_code = i40e_acquire_nvm(hw, I40E_RESOURCE_READ);
 		if (!ret_code) {
 			ret_code = i40e_read_nvm_buffer_aq(hw, offset, words,
-							   data);
+							 data);
 			i40e_release_nvm(hw);
 		}
 	} else {
@@ -358,7 +411,7 @@ enum i40e_status_code i40e_read_nvm_buffer_srctl(struct i40e_hw *hw, u16 offset,
 
 	DEBUGFUNC("i40e_read_nvm_buffer_srctl");
 
-	/* Loop thru the selected region */
+	/* Loop through the selected region */
 	for (word = 0; word < *words; word++) {
 		index = offset + word;
 		ret_code = i40e_read_nvm_word_srctl(hw, index, &data[word]);
@@ -530,7 +583,7 @@ enum i40e_status_code i40e_write_nvm_aq(struct i40e_hw *hw, u8 module_pointer,
 }
 
 /**
- * i40e_write_nvm_word - Writes Shadow RAM word
+ * __i40e_write_nvm_word - Writes Shadow RAM word
  * @hw: pointer to the HW structure
  * @offset: offset of the Shadow RAM word to write
  * @data: word to write to the Shadow RAM
@@ -540,8 +593,8 @@ enum i40e_status_code i40e_write_nvm_aq(struct i40e_hw *hw, u8 module_pointer,
  * reception) by caller. To commit SR to NVM update checksum function
  * should be called.
  **/
-enum i40e_status_code i40e_write_nvm_word(struct i40e_hw *hw, u32 offset,
-					  void *data)
+enum i40e_status_code __i40e_write_nvm_word(struct i40e_hw *hw, u32 offset,
+					    void *data)
 {
 	DEBUGFUNC("i40e_write_nvm_word");
 
@@ -552,7 +605,7 @@ enum i40e_status_code i40e_write_nvm_word(struct i40e_hw *hw, u32 offset,
 }
 
 /**
- * i40e_write_nvm_buffer - Writes Shadow RAM buffer
+ * __i40e_write_nvm_buffer - Writes Shadow RAM buffer
  * @hw: pointer to the HW structure
  * @module_pointer: module pointer location in words from the NVM beginning
  * @offset: offset of the Shadow RAM buffer to write
@@ -564,9 +617,9 @@ enum i40e_status_code i40e_write_nvm_word(struct i40e_hw *hw, u32 offset,
  * on ARQ completion event reception by caller. To commit SR to NVM update
  * checksum function should be called.
  **/
-enum i40e_status_code i40e_write_nvm_buffer(struct i40e_hw *hw,
-					    u8 module_pointer, u32 offset,
-					    u16 words, void *data)
+enum i40e_status_code __i40e_write_nvm_buffer(struct i40e_hw *hw,
+					      u8 module_pointer, u32 offset,
+					      u16 words, void *data)
 {
 	__le16 *le_word_ptr = (__le16 *)data;
 	u16 *word_ptr = (u16 *)data;
@@ -613,15 +666,17 @@ enum i40e_status_code i40e_calc_nvm_checksum(struct i40e_hw *hw, u16 *checksum)
 	data = (u16 *)vmem.va;
 
 	/* read pointer to VPD area */
-	ret_code = i40e_read_nvm_word(hw, I40E_SR_VPD_PTR, &vpd_module);
+	ret_code = __i40e_read_nvm_word(hw, I40E_SR_VPD_PTR,
+					&vpd_module);
 	if (ret_code != I40E_SUCCESS) {
 		ret_code = I40E_ERR_NVM_CHECKSUM;
 		goto i40e_calc_nvm_checksum_exit;
 	}
 
 	/* read pointer to PCIe Alt Auto-load module */
-	ret_code = i40e_read_nvm_word(hw, I40E_SR_PCIE_ALT_AUTO_LOAD_PTR,
-				      &pcie_alt_module);
+	ret_code = __i40e_read_nvm_word(hw,
+					I40E_SR_PCIE_ALT_AUTO_LOAD_PTR,
+					&pcie_alt_module);
 	if (ret_code != I40E_SUCCESS) {
 		ret_code = I40E_ERR_NVM_CHECKSUM;
 		goto i40e_calc_nvm_checksum_exit;
@@ -635,7 +690,7 @@ enum i40e_status_code i40e_calc_nvm_checksum(struct i40e_hw *hw, u16 *checksum)
 		if ((i % I40E_SR_SECTOR_SIZE_IN_WORDS) == 0) {
 			u16 words = I40E_SR_SECTOR_SIZE_IN_WORDS;
 
-			ret_code = i40e_read_nvm_buffer(hw, i, &words, data);
+			ret_code = __i40e_read_nvm_buffer(hw, i, &words, data);
 			if (ret_code != I40E_SUCCESS) {
 				ret_code = I40E_ERR_NVM_CHECKSUM;
 				goto i40e_calc_nvm_checksum_exit;
@@ -710,13 +765,18 @@ enum i40e_status_code i40e_validate_nvm_checksum(struct i40e_hw *hw,
 
 	DEBUGFUNC("i40e_validate_nvm_checksum");
 
-	ret_code = i40e_calc_nvm_checksum(hw, &checksum_local);
-	if (ret_code != I40E_SUCCESS)
+	if (hw->flags & I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE)
+		ret_code = i40e_acquire_nvm(hw, I40E_RESOURCE_READ);
+	if (!ret_code) {
+		ret_code = i40e_calc_nvm_checksum(hw, &checksum_local);
+		if (hw->flags & I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE)
+			i40e_release_nvm(hw);
+		if (ret_code != I40E_SUCCESS)
+			goto i40e_validate_nvm_checksum_exit;
+	} else {
 		goto i40e_validate_nvm_checksum_exit;
+	}
 
-	/* Do not use i40e_read_nvm_word() because we do not want to take
-	 * the synchronization semaphores twice here.
-	 */
 	i40e_read_nvm_word(hw, I40E_SR_SW_CHECKSUM_WORD, &checksum_sr);
 
 	/* Verify read checksum from EEPROM is the same as
@@ -812,10 +872,11 @@ enum i40e_status_code i40e_nvmupd_command(struct i40e_hw *hw,
 	/* early check for status command and debug msgs */
 	upd_cmd = i40e_nvmupd_validate_command(hw, cmd, perrno);
 
-	i40e_debug(hw, I40E_DEBUG_NVM, "%s state %d nvm_release_on_hold %d\n",
+	i40e_debug(hw, I40E_DEBUG_NVM, "%s state %d nvm_release_on_hold %d cmd 0x%08x config 0x%08x offset 0x%08x data_size 0x%08x\n",
 		   i40e_nvm_update_state_str[upd_cmd],
 		   hw->nvmupd_state,
-		   hw->aq.nvm_release_on_done);
+		   hw->aq.nvm_release_on_done,
+		   cmd->command, cmd->config, cmd->offset, cmd->data_size);
 
 	if (upd_cmd == I40E_NVMUPD_INVALID) {
 		*perrno = -EFAULT;
@@ -1083,6 +1144,7 @@ retry:
 		break;
 
 	case I40E_NVMUPD_CSUM_CON:
+		/* Assumes the caller has acquired the nvm */
 		status = i40e_update_nvm_checksum(hw);
 		if (status) {
 			*perrno = hw->aq.asq_last_status ?
@@ -1096,6 +1158,7 @@ retry:
 		break;
 
 	case I40E_NVMUPD_CSUM_LCB:
+		/* Assumes the caller has acquired the nvm */
 		status = i40e_update_nvm_checksum(hw);
 		if (status) {
 			*perrno = hw->aq.asq_last_status ?
diff --git a/drivers/net/i40e/base/i40e_prototype.h b/drivers/net/i40e/base/i40e_prototype.h
index 76dc5b6..93fddf1 100644
--- a/drivers/net/i40e/base/i40e_prototype.h
+++ b/drivers/net/i40e/base/i40e_prototype.h
@@ -437,9 +437,13 @@ enum i40e_status_code i40e_read_nvm_buffer(struct i40e_hw *hw, u16 offset,
 enum i40e_status_code i40e_write_nvm_aq(struct i40e_hw *hw, u8 module,
 					u32 offset, u16 words, void *data,
 					bool last_command);
-enum i40e_status_code i40e_write_nvm_word(struct i40e_hw *hw, u32 offset,
+enum i40e_status_code __i40e_read_nvm_word(struct i40e_hw *hw, u16 offset,
+					   u16 *data);
+enum i40e_status_code __i40e_read_nvm_buffer(struct i40e_hw *hw, u16 offset,
+					     u16 *words, u16 *data);
+enum i40e_status_code __i40e_write_nvm_word(struct i40e_hw *hw, u32 offset,
 					  void *data);
-enum i40e_status_code i40e_write_nvm_buffer(struct i40e_hw *hw, u8 module,
+enum i40e_status_code __i40e_write_nvm_buffer(struct i40e_hw *hw, u8 module,
 					    u32 offset, u16 words, void *data);
 enum i40e_status_code i40e_calc_nvm_checksum(struct i40e_hw *hw, u16 *checksum);
 enum i40e_status_code i40e_update_nvm_checksum(struct i40e_hw *hw);
-- 
2.5.0

  parent reply	other threads:[~2016-02-18  6:30 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-15  2:40 [dpdk-dev] [PATCH 00/29] i40e base driver update Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 01/29] i40e/base: use explicit cast from u16 to u8 Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 02/29] i40e/base: Acquire NVM, before issuing an AQ read nvm command Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 03/29] i40e/base: add hw flag for doing the SRCTL access using AQ for X722 Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 04/29] i40e/base: add changes in nvm read to support X722 Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 05/29] i40e/base: Limit DCB FW version checks to XL710/X710 devices Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 06/29] i40e/base: check for stopped admin queue Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 07/29] i40e/base: set aq count after memory allocation Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 08/29] i40e/base: clean event descriptor before use Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 09/29] i40e/base: add new device IDs and delete deprecated one Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 10/29] i40e/base: fix up recent proxy and wol bits for X722_SUPPORT Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 11/29] i40e/base: define function capabilities in only one place Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 12/29] i40e/base: Fix for PHY NVM interaction problem Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 13/29] i40e/base: set shared bit for multicast filters Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 14/29] i40e/base: add APIs to Add/remove port mirroring rules Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 15/29] i40e/base: add VEB stat control and remove L2 cloud filter Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 16/29] i40e/base: implement the API function for aq_set_switch_config Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 17/29] i40e/base: Add functions to blink led on Coppervale PHY Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 18/29] i40e/base: When in promisc mode apply promisc mode to Tx Traffic as well Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 19/29] i40e/base: Increase timeout when checking GLGEN_RSTAT_DEVSTATE bit Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 20/29] i40e/base: Save off VSI resource count when updating VSI Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 21/29] i40e/base: coding style fixes Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 22/29] i40e/base: use FW to read/write rx control registers Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 23/29] i40e/base: expose some registers to program parser, FD and RSS logic Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 24/29] i40e/base: Add a Virtchnl offload for RSS PCTYPE V2 Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 25/29] i40e/base: add AQ thermal sensor control struct Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 26/29] i40e/base: add/update structure and macro definitions Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 27/29] i40e: add base driver release info Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 28/29] i40e: add/remove new device IDs Helin Zhang
2016-01-15  2:40 ` [dpdk-dev] [PATCH 29/29] i40e: use rx control function for rx control registers Helin Zhang
2016-01-15 10:48 ` [dpdk-dev] [PATCH 00/29] i40e base driver update Bruce Richardson
2016-01-17 13:43   ` Zhang, Helin
2016-02-14  1:57 ` Wu, Jingjing
2016-02-18  6:29 ` [dpdk-dev] [PATCH v2 00/30] " Helin Zhang
2016-02-18  6:29   ` [dpdk-dev] [PATCH v2 01/30] i40e/base: use explicit cast from u16 to u8 Helin Zhang
2016-02-18  6:29   ` [dpdk-dev] [PATCH v2 02/30] i40e/base: acquire NVM, before issuing an AQ read nvm command Helin Zhang
2016-02-18  6:29   ` [dpdk-dev] [PATCH v2 03/30] i40e/base: add hw flag for SRCTL access using AQ for X722 Helin Zhang
2016-02-18  6:29   ` Helin Zhang [this message]
2016-02-18  6:29   ` [dpdk-dev] [PATCH v2 05/30] i40e/base: limit DCB FW version checks to XL710/X710 devices Helin Zhang
2016-02-18  6:29   ` [dpdk-dev] [PATCH v2 06/30] i40e/base: check for stopped admin queue Helin Zhang
2016-02-18  6:29   ` [dpdk-dev] [PATCH v2 07/30] i40e/base: set aq count after memory allocation Helin Zhang
2016-02-18  6:29   ` [dpdk-dev] [PATCH v2 08/30] i40e/base: clean event descriptor before use Helin Zhang
2016-02-18  6:29   ` [dpdk-dev] [PATCH v2 09/30] i40e/base: add new device IDs and delete deprecated one Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 10/30] i40e/base: fix up recent proxy and wol bits for X722_SUPPORT Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 11/30] i40e/base: define function capabilities in only one place Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 12/30] i40e/base: fix for PHY NVM interaction problem Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 13/30] i40e/base: set shared bit for multicast filters Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 14/30] i40e/base: add APIs to Add/remove port mirroring rules Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 15/30] i40e/base: add VEB stat control and remove L2 cloud filter Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 16/30] i40e/base: implement the API function for aq_set_switch_config Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 17/30] i40e/base: add functions to blink led on Coppervale PHY Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 18/30] i40e/base: apply promisc mode to Tx Traffic Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 19/30] i40e/base: increase timeout when checking GLGEN_RSTAT_DEVSTATE bit Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 20/30] i40e/base: save off VSI resource count when updating VSI Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 21/30] i40e/base: coding style fixes Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 22/30] i40e/base: use FW to read/write rx control registers Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 23/30] i40e/base: expose some registers to program parser, FD and RSS logic Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 24/30] i40e/base: add a Virtchnl offload for RSS PCTYPE V2 Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 25/30] i40e/base: add AQ thermal sensor control struct Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 26/30] i40e/base: add/update structure and macro definitions Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 27/30] i40e: add base driver release info Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 28/30] i40e: add/remove new device IDs Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 29/30] i40e: use rx control function for rx control registers Helin Zhang
2016-02-18  6:30   ` [dpdk-dev] [PATCH v2 30/30] i40evf: use base driver defined interface Helin Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455777020-12095-5-git-send-email-helin.zhang@intel.com \
    --to=helin.zhang@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).