[dpdk-dev] [PATCH v3 18/30] i40e/base: apply promisc mode to Tx Traffic

[Helin Zhang <helin.zhang@intel.com>]

In MFP mode particularly when we were setting the PF VSI in limited
promiscuous, the HW switch was still mirroring the outgoing packets
from other VSIs (VF/VMdq) onto the PF VSI.
With this new bit set, the mirroring doesn't happen any more and so
we are in limited promiscuous on the PF VSI in MFP which is similar
to defport.
An API check is not required, since this bit is reserved for FW API
version < 1.5.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
---
 drivers/net/i40e/base/i40e_adminq_cmd.h | 1 +
 drivers/net/i40e/base/i40e_common.c     | 9 ++++++++-
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/i40e/base/i40e_adminq_cmd.h b/drivers/net/i40e/base/i40e_adminq_cmd.h
index c84e0ec..165df9b 100644
--- a/drivers/net/i40e/base/i40e_adminq_cmd.h
+++ b/drivers/net/i40e/base/i40e_adminq_cmd.h
@@ -1143,6 +1143,7 @@ struct i40e_aqc_set_vsi_promiscuous_modes {
 #define I40E_AQC_SET_VSI_PROMISC_BROADCAST	0x04
 #define I40E_AQC_SET_VSI_DEFAULT		0x08
 #define I40E_AQC_SET_VSI_PROMISC_VLAN		0x10
+#define I40E_AQC_SET_VSI_PROMISC_TX		0x8000
 	__le16	seid;
 #define I40E_AQC_VSI_PROM_CMD_SEID_MASK		0x3FF
 	__le16	vlan_tag;
diff --git a/drivers/net/i40e/base/i40e_common.c b/drivers/net/i40e/base/i40e_common.c
index 2383153..a4cf5cf 100644
--- a/drivers/net/i40e/base/i40e_common.c
+++ b/drivers/net/i40e/base/i40e_common.c
@@ -2225,12 +2225,19 @@ enum i40e_status_code i40e_aq_set_vsi_unicast_promiscuous(struct i40e_hw *hw,
 	i40e_fill_default_direct_cmd_desc(&desc,
 					i40e_aqc_opc_set_vsi_promiscuous_modes);
 
-	if (set)
+	if (set) {
 		flags |= I40E_AQC_SET_VSI_PROMISC_UNICAST;
+		if (((hw->aq.api_maj_ver == 1) && (hw->aq.api_min_ver >= 5)) ||
+		     (hw->aq.api_maj_ver > 1))
+			flags |= I40E_AQC_SET_VSI_PROMISC_TX;
+	}
 
 	cmd->promiscuous_flags = CPU_TO_LE16(flags);
 
 	cmd->valid_flags = CPU_TO_LE16(I40E_AQC_SET_VSI_PROMISC_UNICAST);
+	if (((hw->aq.api_maj_ver >= 1) && (hw->aq.api_min_ver >= 5)) ||
+	     (hw->aq.api_maj_ver > 1))
+		cmd->valid_flags |= CPU_TO_LE16(I40E_AQC_SET_VSI_PROMISC_TX);
 
 	cmd->seid = CPU_TO_LE16(seid);
 	status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
-- 
2.5.0